.. role:: code(strong)
.. role:: file(literal)
.. role:: var(emphasis)
================================================================
Pymacs version 0.25
================================================================
---------------------------
Extending Emacs with Python
---------------------------
:Author: François Pinard
:Email: pinard@iro.umontreal.ca
:Copyright: © Progiciels Bourbeau-Pinard inc., Montréal 2003, 2008, 2010, 2012
.. contents::
.. sectnum::
..
There exists a `Romanian translation`__ of this manual.
__ http://webhostinggeeks.com/science/pymacs-framework-ro
.. By `Alexander Ovsov` alovsov@gmail.com
Introduction
============
What is Pymacs?
---------------
Pymacs is a powerful tool which, once started from Emacs, allows two-way
communication between Emacs Lisp and Python. Pymacs aims to employ
Python as an extension language for Emacs rather than the other way
around, and this asymmetry is reflected in some design choices. Within
Emacs Lisp code, one may load and use Python modules. Python functions
may themselves use Emacs services, and handle Emacs Lisp objects kept in
Emacs Lisp space.
The goals are to write *naturally* in both languages, debug with ease,
fall back gracefully on errors, and allow full cross-recursion.
It is very easy to install Pymacs, as neither Emacs nor Python need to
be compiled nor relinked. Emacs merely starts Python as a subprocess,
and Pymacs implements a communication protocol between both processes.
Report problems, documentation flaws, or suggestions to François Pinard:
+ mailto:pinard@iro.umontreal.ca
Documentation and examples
--------------------------
The main Pymacs site conveys the Pymacs documentation (you are reading
its Pymacs manual right now) and distributions:
+ http://pymacs.progiciels-bpi.ca
I expect average Pymacs users to have a deeper knowledge of Python
than Emacs Lisp. People have widely varying approaches in writing
:file:`.emacs` files, as far as Pymacs is concerned:
+ Some can go and write almost no Emacs Lisp, yet a bit is still
necessary for establishing a few loading hooks. For many simple
needs, one can do a lot without having to learn much.
+ On the other hand, for more sophisticated usages, people cannot
really escape knowing the Emacs Lisp API to some extent, because they
should be familiar, programming-wise, with what is a buffer, a point,
a mark, etc. and what are the allowed operations on those.
While Pymacs examples are no substitute for a careful reading of the
Pymacs manual, the contemplation and study of others' nice works may
well enligthen and deepen your understanding. A few examples are
included within the Pymacs distribution, each as a subdirectory of the
:file:`contrib/` directory, and each having its own :file:`README` file.
These are listed below, easiest examples first:
+ Paul Winkler's example
+ http://pymacs.progiciels-bpi.ca/Winkler.html
+ Fernando Pérez' examples
+ http://pymacs.progiciels-bpi.ca/Perez.html
+ http://pymacs.progiciels-bpi.ca/contrib/Perez/
+ Giovanni Giorgi's files
+ http://pymacs.progiciels-bpi.ca/Giorgi.html
+ http://pymacs.progiciels-bpi.ca/contrib/Giorgi/
+ A reformatter for boxed comments
+ http://pymacs.progiciels-bpi.ca/rebox.html
+ http://pymacs.progiciels-bpi.ca/contrib/rebox/
A few more substantial examples of Pymacs usage have been brought to my
attention, and are available externally (listed here in no particular
order):
+ pymdev — A Python Emacs Development Module:
+ http://www.toolness.com/pymdev/
+ Ropemacs — Features like refactoring and code-assists:
+ http://rope.sf.net/ropemacs.html
+ http://rope.sf.net/hg/ropemacs
+ Bicycle Repair Man — A Refactoring Tool for Python:
+ http://bicyclerepair.sourceforge.net/
+ Emacs Freex — A personal wiki on steroids:
+ http://www.princeton.edu/%7Egdetre/software/freex/docs/index.html
+ PyJde — Java dev source code browsing features in Emacs using Python:
+ http://code.google.com/p/pyjde/
The QaTeX project was influenced by Pymacs, according to its author:
+ http://qatex.sourceforge.net/
+ http://www.pytex.org/doc/eurotex2005.pdf
Other resources
---------------
You are welcome writing to or joining the following mailing list, where
there are a few people around likely to give you feedback:
+ mailto:pymacs-devel@googlegroups.com
+ https://groups.google.com/group/pymacs-devel/
If you have no fear of wider crowds :-), there still is:
+ mailto:python-list@python.org
There are other Web sites specifically about Pymacs. `Giovanni Giorgi`__
has one of them:
+ http://blog.objectsroot.com/projects/pymacs/
__ http://blog.objectsroot.com/
There is an entry for Pymacs on Freshmeat:
+ http://freshmeat.net/projects/pymacs/
Installation
============
Check the search paths
----------------------
You should make sure that both Emacs and Python are usable, whatever the
directory happens to be the current one. This is particularly important
at the time Emacs launches Python under the scene, as Python ought to be
found then started. On most systems, this means setting the search path
correctly.
The following notes, for MS Windows, have been provided by Greg Detre.
+ After ``Start / Run / Cmd``, type ``python``. If this works
wherever you are, then your Python installation directory is already
in your system's :code:`PATH` environment variable. If that's not the
case, follow the instructions here to add it:
http://www.computerhope.com/issues/ch000549.htm
+ You may have to add the directory containing the Python scripts that
you want to run through Pymacs to your :code:`PYTHONPATH` variable,
in the same fashion as above. You can test this by running Python,
and then::
import sys
sys.path
or just::
import my_python_scripts
from somewhere besides your scripts directory.
Edit the configuration file
---------------------------
In most cases, you may safely skip this step, as it is only needed in
unusual, problematic circumstances. Merely check that none of the
following applies to you.
+ Under Aquamacs (which is a MacOS X native port of Emacs), it has
been reported that one gets `Lisp nesting exceeds max-lisp-eval-depth`
messages while interactively requesting the documentation for Lisp
functions (we do not know why). If you have this problem, edit file
:file:`ppppconfig.py`, locate the line defining :code:`DEFADVICE_OK`,
make sure it gets the string ``'nil'`` as a value, instead of the
string ``'t'``, then save the edited file before proceeding further.
This should work around the problem. The price to pay is that you
will not get the Python docstring for modules imported through Pymacs.
Check if Pymacs would work
--------------------------
To know, before installing Pymacs, if it would work on your system, try
the validation suite by running ``make check``. The suite is fairly
elementary, but nevertheless, it is able to detect some common show
stoppers. To check a particular Emacs and Python combination, use
``make check EMACS=some_Emacs PYTHON=some_Python``.
If ``PYTHON`` is left unset or empty, then the command for starting the
Pymacs helper is ``python``. Otherwise, it may be set to give the full
path of the Python executable if it exists at some location outside the
program search path. It may also be given when the interpreter name is
different, for exemple when the Python version is part of the program
name.
If ``EMACS`` is left unset or empty, then the command for starting the
Emacs editor is ``emacs``. For normal Pymacs usage, Emacs is launched
by the user long before Pymacs is itself started, and consequently,
there is absolutely no need to tell Pymacs which Emacs is needed. For
the validation suite however, it may be set to give the full path of
the executable if the Emacs program exists at some location outside
the program search path. It may also be given when the editor name is
different, for example when the Emacs version is part of the program
name, or when this is a different editor. For example, ``make check
EMACS=xemacs`` runs the validation suite using ``xemacs`` for an editor.
The remaining of this section may be safely be skipped for mere Pymacs
installation.
I did not base the validation suite on Junit (the Python unit testing
framework is a re-implementation of it), but on Codespeak's pylib
:file:`py.test`, which is much simpler, and still very powerful. The
:code:`pylib` project is driven by Holge Kregel, but attracted some
Python brains, like Armin Rigo (known for Psyco, among other things --
I think his :code:`lsprof` has also been added to Python 2.5 under the
name :code:`cProfile`). This gang addresses overdone/heavy methods in
Python, and do them better. Even :file:`py.test` is a bit more complex
that I would want, and has (or at least had) flaws on the Unicode side,
so I rewrote my own, as a simple single file. I merely translated it
from French to English, to make it more distributable within Pymacs.
I initially tried using Emacs stdin and stdout for communicating
expressions to evaluate and getting back results, from within the
validation suite. This did not prove useful so, so after some fight, I
reluctantly put this avenue aside. Currently, the suite writes problems
in files, for Emacs to read, and Emacs writes replies in files, for the
suite to check. Busy waiting (with small sleep added in the loops) is
used on both sides. This is all too heavy, and it slows down the suite.
Hopefully, the suite is not run often, this is not a real problem.
Install the Pymacs proper
-------------------------
Pymacs is lean. Putting the documentation and administrative
files aside, there is one Python file and one Emacs Lisp file to it, to
be installed in turn. Always start with the Python file.
+ For the Python part
From the top-level of the Pymacs distribution, execute ``make
install``. If you do not have a Make program (Microsoft Windows?)
read the ``Makefile`` file and emulate what ``make install`` does,
maybe something like this::
python pppp -C ppppconfig.py pppp.rst.in pymacs.el.in \
pymacs.rst.in Pymacs.py.in contrib tests
python setup.py install
Without ``make install``, you might also have to combine the two first
lines above into a single longer one, without the backslash.
If the Python interpreter has a non-standard name or
location, rather do ``make install PYTHON=Some_Python`` (see the
previous section for a discussion). First, the script copies a few
source files while configuring them: it presets the version string and
the name of the Python interpreter, it also adapts the Python source
code which might differ, for example, between Python 2 and Python 3.
Second, it installs the Python file through the Python standard
Distutils tool. To get an option reminder, do ``python setup.py
install --help``. Consult the Distutils documentation if you need
more information about this.
That's normally all to it. To check that :file:`Pymacs.py` is
properly installed, start an interactive Python session and type
``from Pymacs import lisp``: you should not receive any error.
A special difficulty arises when the particular Python you use
does not have Distutils already installed. In such a case, ``make
install`` prints a warning, leaving to you the task of figuring out
where the ``Pymacs/`` directory is best copied, and making that copy.
+ For the Emacs part
This is usually done by hand now. First select some directory along
the list kept in your Emacs :code:`load-path`, for which you have
write access, and copy file :file:`pymacs.el` in that directory.
If you want speed, you should ideally byte-compile this file. To do
so, go to that directory, launch Emacs, then give the command ``M-x
byte-compile-file RET pymacs.el RET``. If for some reason you intend
to such commands often, you could create a little script to do so.
Here is an example of such a script, assuming here that you use Emacs
and want to install in directory :file:`~/share/emacs/lisp/`::
#!/bin/bash
cp pymacs.el ~/share/emacs/lisp/
emacs -batch -eval '(byte-compile-file "~/share/emacs/lisp/pymacs.el")'
You should be done now. To check that :file:`pymacs.el` is properly
installed, return to your usual directories, start Emacs and give
it the command ``M-x load-library RET pymacs RET``: you should not
receive any error.
Some features from previous Pymacs releases have been dropped:
+ Environment variable ``PYMACS_EMACS`` is gone, and environment
variable ``PYMACS_PYTHON`` is usually not needed.
+ There used to be a script for installing the Emacs Lisp file. As it
was difficult to get it right in all circumstances; the script grew
an interactive mode and lot of options. This is just not worth the
complexity, so this script is now gone.
+ Examples were all installed automatically, but at least for some of
them, this was more pollution than help. You may browse the contents of
the :file:`contrib/` directory to learn about available examples.
Prepare your :file:`.emacs` file
--------------------------------
The :file:`.emacs` file is not given in the distribution, you likely
have one already in your home directory. You need to add these lines::
(autoload 'pymacs-apply "pymacs")
(autoload 'pymacs-call "pymacs")
(autoload 'pymacs-eval "pymacs" nil t)
(autoload 'pymacs-exec "pymacs" nil t)
(autoload 'pymacs-load "pymacs" nil t)
(autoload 'pymacs-autoload "pymacs")
;;(eval-after-load "pymacs"
;; '(add-to-list 'pymacs-load-path YOUR-PYMACS-DIRECTORY"))
If you plan to use a special directory to hold your own Pymacs code in
Python, which should be searched prior to the usual Python import search
path, then uncomment the last two lines (by removing the semi-colons)
and replace :var:`YOUR-PYMACS-DIRECTORY` by the name of your special
directory. If the file :file:`~/.emacs` does not exist, merely create
it with the above lines. You are now all set to use Pymacs.
To check this, start a fresh Emacs session, and type ``M-x
pymacs-eval RET``. Emacs should prompt you for a Python expression.
Try ``repr(2L**111) RET`` (rather use ``repr(2**111) RET``
if you are using Python 3). The mini buffer should display
`"2596148429267413814265248164610048L"` (yet there is no ``L`` suffix
in Python 3).
Let's do a second test. Whether in the same Emacs session or not, ``M-x
pymacs-load RET`` should prompt you for a Python module name. Reply
``os RET RET`` (the second ``RET`` is for accepting the default prefix).
This should have the effect of importing the Python :code:`os` module
within Emacs. Typing ``M-: (os-getcwd) RET`` should echo the current
directory in the message buffer, as returned by the :code:`os.getcwd`
Python function.
Porting and caveats
-------------------
Pymacs has been initially developed on Linux, Python 1.5.2, and Emacs
20, and is currently developed using Python 2.6, Python 3.1, Emacs 23.1
and XEmacs 21.4. It is expected to work out of the box on many flavours
of Unix, MS Windows and Mac OSX, and also on many version of Python,
Emacs and XEmacs.
From Pymacs 0.23 and upwards, Python 2.2 or better is likely needed,
and for the Pymacs proper, I rely on testers or users for portability
issues. However, the validation suite itself requires Python 2.6 or
better, someone might choose to contribute the back porting. Python 3.1
support has been added for Pymacs 0.24.
Pymacs uses Emacs weak hash tables. It can run without them, but then,
complex Python objects transmitted to Emacs will tie Python memory
forever. It should not be a practical problem in most simple cases.
Some later versions of Emacs 20 silently create ordinary tables when
asked for weak hash tables. Older Emacses do not have hash tables.
In earlier versions, Pymacs was installing a :file:`Pymacs` Python
package holding a single :file:`pymacs.py` file (besides the
mandatory :file:`__init__.py`). This is now replaced by a single
:file:`Pymacs.py` file, and because of the capitalisation, the API did
not need to change.
Emacs Lisp structures and Python objects
========================================
Conversions
-----------
Whenever Emacs Lisp calls Python functions giving them arguments, these
arguments are Emacs Lisp structures that should be converted into Python
objects in some way. Conversely, whenever Python calls Emacs Lisp
functions, the arguments are Python objects that should be received
as Emacs Lisp structures. We need some conventions for doing such
conversions.
Conversions generally transmit mutable Emacs Lisp structures as mutable
objects on the Python side, in such a way that transforming the object
in Python will effectively transform the structure on the Emacs Lisp
side (strings are handled a bit specially however, see below). The
other way around, Python objects transmitted to Emacs Lisp often loose
their mutability, so transforming the Emacs Lisp structure is not
reflected on the Python side.
Pymacs sticks to standard Emacs Lisp, it explicitly avoids various Emacs
Lisp extensions. One goal for many Pymacs users is taking some distance
from Emacs Lisp, so Pymacs is not overly pushing users deeper into it.
Simple objects
--------------
Emacs Lisp :code:`nil` and the equivalent Emacs Lisp ``()`` yield Python
:code:`None`. Python :code:`None`, Python :code:`False` and the Python
empty list ``[]`` are returned as :code:`nil` in Emacs Lisp. Notice
the assymetry, in that three different Python objects are mapped into
a single Emacs Lisp object. So, neither :code:`False` nor ``[]`` are
likely produced by automatic conversions from Emacs Lisp to Python.
Emacs Lisp :code:`t` yields Python :code:`True`. Python :code:`True` is
returned as :code:`t` in Emacs Lisp.
Emacs Lisp numbers, either integer or floating, are converted in
equivalent Python numbers. Emacs Lisp characters are really numbers
and yield Python numbers. In the other direction, Python numbers are
converted into Emacs Lisp numbers, with the exception of long Python
integers and complex numbers.
Emacs Lisp strings are usually converted into equivalent Python strings.
As Python strings do not have text properties, these are not reflected.
This may be changed by setting the :code:`pymacs-mutable-strings`
option: if this variable is not :code:`nil`, Emacs Lisp strings are
then transmitted opaquely. Python strings are always converted into
Emacs Lisp strings. Python releases before version 3 make a distinction
between Unicode and narrow strings: Unicode strings are then produced
on the Python side for Emacs Lisp multi-byte strings, but only when
they do not fit in ASCII, otherwise Python narrow strings are produced.
Conversely, Emacs Lisp multi-byte strings are produced for Python
strings, but only when they do not fit ASCII, otherwise Emacs Lisp
uni-byte strings are produced. Currently, Pymacs behaviour is undefined
for users wandering outside the limits of Emacs' :code:`utf-8` coding
system.
Emacs Lisp symbols yield ``lisp[STRING]`` notations on the Python
side, where :var:`STRING` names the symbol. In the other direction,
Python ``lisp[STRING]`` corresponds to an Emacs Lisp symbol printed
with that :var:`STRING` which, of course, should then be a valid Emacs
Lisp symbol name. As a convenience, ``lisp.SYMBOL`` on the Python side
yields an Emacs Lisp symbol with underscores replaced with hyphens;
this convention is welcome, as Emacs Lisp programmers commonly prefer
using dashes, where Python programmers use underlines. Of course, this
``lisp.SYMBOL`` notation is only usable when the :var:`SYMBOL` is a
valid Python identifier, while not being a Python keyword.
Sequences
---------
The case of strings has been discussed in the previous section.
Proper Emacs Lisp lists, those for which the :code:`cdr` of last cell
is :code:`nil`, are normally transmitted opaquely to Python. If
:code:`pymacs-forget-mutability` is set, or if Python later asks for
these to be expanded, proper Emacs Lisp lists get converted into Python
lists, if we except the empty list, which is always converted as Python
:code:`None`. In the other direction, Python lists are always converted
into proper Emacs Lisp lists.
Emacs Lisp vectors are normally transmitted opaquely to Python.
However, if :code:`pymacs-forget-mutability` is set, or if Python
later asks for these to be expanded, Emacs Lisp vectors get converted
into Python tuples. In the other direction, Python tuples are always
converted into Emacs Lisp vectors.
Remember the rule: `Round parentheses correspond to square brackets!`.
It works for lists, vectors, tuples, seen from either Emacs Lisp or
Python.
The above choices were debatable. Since Emacs Lisp proper lists
and Python lists are the bread-and-butter of algorithms modifying
structures, at least in my experience, I guess they are more naturally
mapped into one another, this spares many casts in practice. While in
Python, the most usual idiom for growing lists is appending to their
end, the most usual idiom in Emacs Lisp to grow a list is by cons'ing
new items at its beginning::
(setq accumulator (cons 'new-item accumulator))
or more simply::
(push 'new-item accumulator)
So, in case speed is especially important and many modifications
happen in a row on the same side, while order of elements ought to
be preserved, some ``(nreverse ...)`` on the Emacs Lisp side or
``.reverse()`` on the Python side might be needed. Surely, proper
lists in Emacs Lisp and lists in Python are the normal structure for
which length is easily modified.
We cannot so easily change the size of a vector, the same as it is a bit
more of a stunt to *modify* a tuple. The shape of these objects is
fixed. Mapping vectors to tuples, which is admittedly strange, will
only be done if the Python side requests an expanded copy, otherwise an
opaque Emacs Lisp object is seen in Python. In the other direction,
whenever an Emacs Lisp vector is needed, one has to write
``tuple(python_list)`` while transmitting the object. Such
transmissions are most probably to be unusual, as people are not going
to blindly transmit whole big structures back and forth between Emacs
and Python, they would rather do it once in a while only, and do only
local modifications afterwards. The infrequent casting to :code:`tuple`
for getting an Emacs Lisp vector seems to suggest that we did a
reasonable compromise.
In Python, both tuples and lists have O(1) access, so there is no real
speed consideration there. Emacs Lisp is different: vectors have
O(1) access while lists have O(N) access. The rigidity of Emacs Lisp
vectors is such that people do not resort to vectors unless there
is a speed issue, so in real Emacs Lisp practice, vectors are used
rather parsimoniously. So much, in fact, that Emacs Lisp vectors are
overloaded for what they are not meant: for example, very small vectors
are used to represent X events in key-maps, programmers only want to
test vectors for their type, or users just like bracketed syntax. The
speed of access is hardly an issue then.
Opaque objects
--------------
Emacs Lisp handles
,,,,,,,,,,,,,,,,,,
When a Python function is called from Emacs Lisp, the function arguments
have already been converted to Python types from Emacs Lisp types and
the function result is going to be converted back to Emacs Lisp.
Several Emacs Lisp objects do not have Python equivalents, like for
Emacs windows, buffers, markers, overlays, etc. It is nevertheless
useful to pass them to Python functions, hoping that these Python
functions will *operate* on these Emacs Lisp objects. Of course, the
Python side may not itself modify such objects, it has to call for
Emacs services to do so. Emacs Lisp handles are a mean to ease this
communication.
Whenever an Emacs Lisp object may not be converted to a Python object,
an Emacs Lisp handle is created and used instead. Whenever that Emacs
Lisp handle is returned into Emacs Lisp from a Python function, or
is used as an argument to an Emacs Lisp function from Python, the
original Emacs Lisp object behind the Emacs Lisp handle is automatically
retrieved.
Emacs Lisp handles are either instances of the internal :code:`Lisp`
class, or of one of its subclasses. If :var:`OBJECT` is an Emacs
Lisp handle, and if the underlying Emacs Lisp object is an Emacs
Lisp sequence, then whenever ``OBJECT[INDEX]``, ``OBJECT[INDEX] =
VALUE`` and ``len(OBJECT)`` are meaningful, these may be used to
fetch or alter an element of the sequence directly in Emacs Lisp
space. Also, if :var:`OBJECT` corresponds to an Emacs Lisp function,
``OBJECT(ARGUMENTS)`` may be used to apply the Emacs Lisp function over
the given arguments. Since arguments have been evaluated the Python
way on the Python side, it would be conceptual overkill evaluating them
again the Emacs Lisp way on the Emacs Lisp side, so Pymacs manage to
quote arguments for defeating Emacs Lisp evaluation. The same logic
applies the other way around.
Emacs Lisp handles have a ``value()`` method, which merely returns
self. They also have a ``copy()`` method, which tries to *open
the box* if possible. Emacs Lisp proper lists are turned into Python
lists, Emacs Lisp vectors are turned into Python tuples. Then,
modifying the structure of the copy on the Python side has no effect on
the Emacs Lisp side.
For Emacs Lisp handles, ``str()`` returns an Emacs Lisp representation
of the handle which should be :code:`eq` to the original object if
read back and evaluated in Emacs Lisp. ``repr()`` returns a Python
representation of the expanded Emacs Lisp object. If that Emacs Lisp
object has an Emacs Lisp representation which Emacs Lisp could read
back, then ``repr()`` value is such that it could be read back and
evaluated in Python as well, this would result in another object which
is :code:`equal` to the original, but not necessarily :code:`eq`.
Python handles
,,,,,,,,,,,,,,
The same as Emacs Lisp handles are useful for handling Emacs Lisp
objects on the Python side, Python handles are useful for handling
Python objects on the Emacs Lisp side.
Many Python objects do not have direct Emacs Lisp equivalents, including
long integers, complex numbers, modules, classes, instances and surely a
lot of others. When such are being transmitted to the Emacs Lisp side,
Pymacs use Python handles. These are automatically recovered into the
original Python objects whenever transmitted back to Python, either as
arguments to a Python function, as the Python function itself, or as the
return value of an Emacs Lisp function called from Python.
The objects represented by these Python handles may be inspected or
modified using the basic library of Python functions. For example, in::
(pymacs-exec "import re")
(setq matcher (pymacs-eval "re.compile('PATTERN').match"))
(pymacs-call matcher ARGUMENT)
the :code:`setq` line above could be decomposed into::
(setq compiled (pymacs-eval "re.compile('PATTERN')")
matcher (pymacs-call "getattr" compiled "match"))
This example shows that one may use :code:`pymacs-call` with
:code:`getattr` as the function, to get a wanted attribute for a Python
object.
Usage on the Emacs Lisp side
============================
Special Emacs Lisp functions
----------------------------
Pymacs is mainly launched and used through a few special functions,
among all those added by Pymacs for Emacs Lisp. These few imported
functions are listed and detailed in the following subsections. They
really are the preferred way to call Python services with Pymacs.
Even then, we do not expect that :code:`pymacs-exec`,
:code:`pymacs-eval`, :code:`pymacs-call` or :code:`pymacs-apply` will
be much used, if ever, in most Pymacs applications. In practice, the
Emacs Lisp side of a Pymacs application might call either
:code:`pymacs-autoload` or :code:`pymacs-load` a few times for linking
into the Python modules, with the indirect effect of defining
trampoline functions for these modules on the Emacs Lisp side, which
can later be called like usual Emacs Lisp functions.
:code:`pymacs-exec`
,,,,,,,,,,,,,,,,,,,
Function ``(pymacs-exec TEXT)`` gets :var:`TEXT` executed as a Python
statement, and its value is always :code:`nil`. So, this function may
only be useful because of its possible side effects on the Python side.
This function may also be called interactively::
M-x pymacs-exec RET TEXT RET
:code:`pymacs-eval`
,,,,,,,,,,,,,,,,,,,
Function ``(pymacs-eval TEXT)`` gets :var:`TEXT` evaluated as a Python
expression, and returns the value of that expression converted back to
Emacs Lisp.
This function may also be called interactively::
M-x pymacs-eval RET TEXT RET
:code:`pymacs-call`
,,,,,,,,,,,,,,,,,,,
Function ``(pymacs-call FUNCTION ARGUMENT...)`` will get Python to
apply the given :var:`FUNCTION` over zero or more :var:`ARGUMENT`.
:var:`FUNCTION` is either a string holding Python source code for a
function (like a mere name, or even an expression), or else, a Python
handle previously received from Python, and hopefully holding a callable
Python object. Each :var:`ARGUMENT` gets separately converted to Python
before the function is called. :code:`pymacs-call` returns the resulting
value of the function call, converted back to Emacs Lisp.
:code:`pymacs-apply`
,,,,,,,,,,,,,,,,,,,,
Function ``(pymacs-apply FUNCTION ARGUMENTS)`` will get Python to
apply the given :var:`FUNCTION` over the given :var:`ARGUMENTS`.
:var:`ARGUMENTS` is a list containing all arguments, or :code:`nil`
if there is none. Besides arguments being bundled together
instead of given separately, the function acts pretty much like
:code:`pymacs-call`.
:code:`pymacs-load`
,,,,,,,,,,,,,,,,,,,
Function ``(pymacs-load MODULE PREFIX)`` imports the Python
:var:`MODULE` into Emacs Lisp space. :var:`MODULE` is the name of the
file containing the module, without any :file:`.py` or :file:`.pyc`
extension. If the directory part is omitted in :var:`MODULE`, the
module will be looked into the current Python search path. Dot notation
may be used when the module is part of a package. Each top-level
function in the module produces a trampoline function in Emacs Lisp
having the same name, except that underlines in Python names are
turned into dashes in Emacs Lisp, and that :var:`PREFIX` is uniformly
added before the Emacs Lisp name (as a way to avoid name clashes).
:var:`PREFIX` may be omitted, in which case it defaults to base name
of :var:`MODULE` with underlines turned into dashes, and followed by a
dash.
Note that :code:`pymacs-load` has the effect of declaring the module
variables and methods on the Emacs Lisp side, but it does *not* declare
anything on the Python side. Of course, Python imports the module
before making it available for Emacs, but there is no Pymacs ready
variable on the Python side holding that module. If you need to import
:var:`MODULE` in a variable on the Python side, the proper incantation
is ``(pymacs-exec "import MODULE")``. And of course, this latter
statement does not declare anything on the Emacs Lisp side.
Whenever :code:`pymacs_load_hook` is defined in the loaded
Python module, :code:`pymacs-load` calls it without arguments,
but before creating the Emacs view for that module. So, the
:code:`pymacs_load_hook` function may create new definitions or even add
:code:`interaction` attributes to functions.
The return value of a successful :code:`pymacs-load` is the module
object. An optional third argument, :var:`noerror`, when given and not
:code:`nil`, will have :code:`pymacs-load` to return :code:`nil` instead
of raising an error, if the Python module could not be found.
When later calling one of these trampoline functions, all provided
arguments are converted to Python and transmitted, and the function
return value is later converted back to Emacs Lisp. It is left to
the Python side to check for argument consistency. However, for an
interactive function, the interaction specification drives some checking
on the Emacs Lisp side. Currently, there is no provision for collecting
keyword arguments in Emacs Lisp.
This function may also be called interactively::
M-x pymacs-load RET MODULE RET PREFIX RET
If you find yourself using :code:`pymacs-call` a lot for builtin Python
functions, you might rather elect to import all Python builtin functions
and definitions directly into Emacs Lisp space, and call them directly
afterwards. Here is a recipe (use the first line for Python 2, or the
second line for Python 3)::
M-x pymacs-load RET __builtin__ RET py- RET
M-x pymacs-load RET builtins RET py- RET
After such a command, calling the function ``py-getattr``, say, with an
opaque Python object and with a string naming an attribute, returns the
value of that attribute for that object.
:code:`pymacs-autoload`
,,,,,,,,,,,,,,,,,,,,,,,
Function ``(pymacs-autoload FUNCTION MODULE PREFIX DOCSTRING
INTERACTIVE)`` is meant to mimic the functionality of the standard
Emacs :code:`autoload` function.
It declares :var:`FUNCTION` to be autoloaded from the specified Python
:var:`MODULE`. The :code:`pymacs-load` for this module is delayed
until :var:`FUNCTION` is actually called. Of course, if there are
many such functions declared as autoloading the module, calling any of
them will then load the module and resolve the autoloading for all of
them at once. For the meaning of the optional :var:`PREFIX` argument,
see the documentation for the :code:`pymacs-load` function above.
Before the function gets loaded for real, Emacs may still provide a
documentation for it, which the user gives through the contents of the
optional :var:`DOCSTRING`. Emacs also needs to know if the function
may be called interactively and, when this is the case, the arguments
it may accept. If the :var:`INTERACTIVE` argument is not provided, or
when it is nil, the function is not known to be interactive. A value
of :code:`t` for :var:`INTERACTIVE` means that the function is
interactive, but has no arguments. Otherwise, :var:`INTERACTIVE`
receives a description of the interaction to interactively get the
function arguments. See the Emacs documentation for function
:code:`autoload` and :code:`interactive` for more information.
If, at the moment of the :code:`pymacs-autoload` call, :var:`FUNCTION`
is already related to a loaded Python function, the autoloading
declaration is ignored.
Here are examples of usage for the :code:`pymacs-autoload` function::
(pymacs-autoload 'os-getenv "os" nil nil "sEnv name: ")
(pymacs-autoload 'posix-getenv "os" "posix-" nil
'(list (read-string "Env name: ")))
The second example could be written more simply as in the first
example. Moreover, both examples of an :var:INTERACTIVE argument are
merely given here for illustration, as the real :code:`os-getenv`
function is *not* interactive.
Special Emacs Lisp variables
----------------------------
Users could alter the inner working of Pymacs through a few variables,
these are all documented here. Except for :code:`pymacs-python-command`
and :code:`pymacs-load-path`, which should be set before calling any
Pymacs function, the value of these variables can be changed at any
time.
:code:`pymacs-python-command`
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
This variable is initialized with the Python executable that was used
at installation time. It tells Emacs about the Python interpreter to
launch far starting the Pymacs helper. The value of this variable may
be overridden by setting the ``PYMACS_PYTHON`` environment variable, yet
in practice, for newer versions of Pymacs, this is rarely needed.
While the Python part of Pymacs is pre-processed and yields different
sources for Python 2 and Python 3 (among other possibilities), the
Emacs part of Pymacs is mostly configured at run time for various Emacs
versions, so the same Emacs source is likely to work unaltered, would it
be for different versions of Emacs and for different versions of Python.
So it makes sense, at least in some special circumstances, giving the
capability of selecting a specific Python interpreter by programmatical
means within Emacs.
:code:`pymacs-load-path`
,,,,,,,,,,,,,,,,,,,,,,,,
Users might want to use special directories for holding their Python
modules, when these modules are meant to be used from Emacs. Best is to
preset :code:`pymacs-load-path`, :code:`nil` by default, to a list of
these directory names. (Tilde expansions and such occur automatically.)
Here is how it works. The first time Pymacs is needed from Emacs, a
Pymacs helper is automatically started as an Emacs subprocess, and
given as arguments all strings in the :code:`pymacs-load-path` list.
These arguments are added at the beginning of :code:`sys.path`, or
moved at the beginning if they were already on :code:`sys.path`. So
in practice, nothing is removed from :code:`sys.path`.
:code:`pymacs-trace-transit`
,,,,,,,,,,,,,,,,,,,,,,,,,,,,
The :code:`*Pymacs*` buffer, within Emacs, holds a trace of transactions
between Emacs and Python. When :code:`pymacs-trace-transit` is
:code:`nil`, the buffer only holds the last bi-directional transaction
(a request and a reply). In this case, it gets erased before each and
every transaction. If that variable is :code:`t`, all transactions are
kept. This could be useful for debugging, but the drawback is that
this buffer could grow big over time, to the point of diminishing Emacs
performance. As a compromise, that variable may also be a cons cell
of integers ``(KEEP . LIMIT)``, in which case the buffer is reduced to
approximately :var:`KEEP` bytes whenever its size exceeds :var:`LIMIT`
bytes, by deleting an integral number of lines from its beginning. The
default setting for :code:`pymacs-trace-transit` is ``(5000 . 30000)``.
:code:`pymacs-forget-mutability`
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
The default behaviour of Pymacs is to transmit Emacs Lisp objects to
Python in such a way that they are fully modifiable from the Python
side, would it mean triggering Emacs Lisp functions to act on them.
When :code:`pymacs-forget-mutability` is not :code:`nil`, the behaviour
is changed, and the flexibility is lost. Pymacs then tries to expand
proper lists and vectors as full copies when transmitting them on the
Python side. This variable, seen as a user setting, is best left to
:code:`nil`. It may be temporarily overridden within some functions,
when deemed useful.
There is no corresponding variable from objects transmitted to Emacs
from Python. Pymacs automatically expands what gets transmitted.
Mutability is preserved only as a side-effect of not having a natural
Emacs Lisp representation for the Python object. This asymmetry is on
purpose, yet debatable. Maybe Pymacs could have a variable telling that
mutability is important for Python objects? That would give Pymacs
users the capability of restoring the symmetry somewhat, yet so far, in
our experience, this has never been needed.
:code:`pymacs-mutable-strings`
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Strictly speaking, Emacs Lisp strings are mutable. Yet, it does not
come naturally to a Python programmer to modify a string *in-place*, as
Python strings are never mutable. When :code:`pymacs-mutable-strings`
is :code:`nil`, which is the default setting, Emacs Lisp strings are
transmitted to Python as Python strings, and so, loose their mutability.
Moreover, text properties are not reflected on the Python side. But
if that variable is not :code:`nil`, Emacs Lisp strings are rather
passed as Emacs Lisp handles. This variable is ignored whenever
:code:`pymacs-forget-mutability` is set.
Timeout variables
,,,,,,,,,,,,,,,,,
Emacs needs to protect itself a bit, in case the Pymacs service program,
which handles the Python side of requests, would not start correctly, or
maybe later die unexpectedly. So, whenever Emacs reads data coming from
that program, it sets a time limit, and take some action whenever that
time limit expires. All times are expressed in seconds.
The :code:`pymacs-timeout-at-start` variable defaults to 30 seconds,
this time should only be increased if a given machine is so heavily
loaded that the Pymacs service program has not enough of 30 seconds to
start, in which case Pymacs refuses to work, with an appropriate message
in the mini buffer.
The two remaining timeout variables almost never need to be changed
in practice. When Emacs is expecting a reply from Python, it might
repeatedly check the status of the Pymacs service program when that
reply is not received fast enough, just to make sure that this program
did not die. The :code:`pymacs-timeout-at-reply` variable, which
defaults to 5, says how many seconds to wait without checking, while
expecting the first line of a reply. The :code:`pymacs-timeout-at-line`
variable, which defaults to 2, says how many seconds to wait without
checking, while expecting a line of the reply after the first.
:code:`pymacs-auto-restart`
,,,,,,,,,,,,,,,,,,,,,,,,,,,
The Pymacs helper process is started as soon as it is needed, and gets
associated with the :code:`*Pymacs*` buffer. When that buffer is
killed, as it occurs automatically whenever the Emacs session is ending,
the Pymacs helper process is killed as well. Any other disappearance of
the helper is unexpected, and might be the consequence of some error in
the Python side of the user application (or a Pymacs bug, maybe!).
When the Pymacs helper dies, all useful Python objects it might contain
also die with it. So, after an unexpected death, there might now exist
dangling references in Emacs Lisp space towards vanished Python objects,
and using these references may be fatal to the application. When the
Pymacs helper dies, the safest thing to do is stopping all Pymacs
functionality and even exiting Emacs. On the other hand, it is not
always practical having to restart everything in such cases: the user
knows best, and is the one who ultimately decides.
The Pymacs helper death is detected at the time a new Pymacs request
gets initiated from the Emacs side. Pymacs could not do much without a
Pymacs helper, so it has either to restart a new Pymacs helper, or abort
the Pymacs request. The variable :code:`pymacs-auto-restart` controls how
this is done. The possible values are:
+ ``nil`` — the Pymacs request is unconditionally aborted,
+ ``t`` — a new Pymacs helper is silently launched, and the previous helper
death might well go unnoticed,
+ ``'ask`` — the user interactively decides whether to restart the
Pymacs helper or not. This is the default value.
:code:`pymacs-dreadful-zombies`
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
When a Pymacs helper gets restarted in a given Emacs session, brand new
Python objects may be created within that new helper. There is not
enough information kept on the Emacs Lisp side for the new Pymacs helper
to recreate the useful Python objects which disappeared. However, there
is enough machinery to recover all their slot numbers (all references to
opaque Python objects from Emacs Lisp space are transmitted in form of
object slot numbers).
The new Pymacs helper is given the list of all previous slot numbers
still referenced from the Emacs side, and is then careful at never
allocating a new Python object using an old slot number, as this might
possibly create fatal confusion. All the previous slots are initialized
with so-called *zombies* on the Python side. If Emacs later calls a
vanished Python object, this merely awakes its zombie, which will then
make some noise, then fall asleep again. The noise has the form of a
diagnostic within the ``*Messages*`` buffer, sometimes visible in the
mini-buffer too, at least when the mini-buffer is not simultaneously
used for some other purpose.
Zombies get more dreadful if :code:`pymacs-dreadful-zombies` is set to a
non-:code:`nil` value. In this case, calling a vanished Python object
raises an error that will eventually interrupt the current computation.
Such a behaviour might be useful for debugging purposes, or for making
sure that no call to a vanished Python object goes unnoticed.
In previous Pymacs releases, zombies were always dreadful, under the
assumption that calling a vanished object is a real error. However, it
could cause irritation in some circumstances, like when associated with
frequently triggered Emacs Lisp hook functions. That's why that, by
default, zombies have been finally turned into more innocuous beings!
Usage on the Python side
========================
Python setup
------------
For Python modules meant to be used from Emacs and which receive nothing
but Emacs :code:`nil`, numbers or strings, or return nothing but Python
:code:`None`, numbers or strings, then Pymacs requires little or no
setup. Otherwise, use ``from Pymacs import lisp`` at the start of your
module. If you need more Pymacs features, like the :code:`Let` class,
then write ``from Pymacs import lisp, Let``.
The Pymacs helper runs Python code to serve the Emacs side, and it is
blocked waiting until Emacs sends a request. Until the Pymacs helper
returns a reply, Emacs is blocked in turn, yet fully listening to serve
eventual Python sub-requests, etc. So, either Emacs or the Pymacs
helper is active at a given instant, but never both at once.
Unless Emacs has sent a request to the Pymacs helper and is expecting
a reply, it is just not listening to receive Python requests. So, any
other Python thread may not asynchronously use Pymacs to get Emacs
services. The design of the Python application should be such that the
communication is always be channelled from the main Python thread.
When Pymacs starts, all process signals are inhibited on the Python
side. Yet, :code:`SIGINT` gets re-enabled while running user functions.
If the user elects to reactivate some other signal in her Python code,
she should do so as to not damage or severe the communication protocol.
Emacs Lisp symbols
------------------
:code:`lisp` is a special object which has useful built-in magic. Its
attributes do nothing but represent Emacs Lisp symbols, created on the
fly as needed (symbols also have their built-in magic).
As special cases, ``lisp.nil`` or ``lisp["nil"]`` are the same
as :code:`None`, and ``lisp.t`` or ``lisp["t"]`` are the same as
:code:`True`. Otherwise, both ``lisp.SYMBOL`` and ``lisp[STRING]``
yield objects of the internal :code:`Symbol` type. These are genuine
Python objects, that could be referred to by simple Python variables.
One may write ``quote = lisp.quote``, for example, and use ``quote``
afterwards to mean that Emacs Lisp symbol. If a Python function
received an Emacs Lisp symbol as an argument, it can check with ``==``
if that argument is ``lisp.never`` or ``lisp.ask``, say. A Python
function may well choose to return some symbol, like ``lisp.always``.
In Python, writing ``lisp.SYMBOL = VALUE`` or ``lisp[STRING] = VALUE``
does assign :var:`VALUE` to the corresponding symbol in Emacs Lisp
space. Beware that in such cases, the ``lisp.`` prefix may not be
spared. After ``result = lisp.result``, one cannot hope that a later
``result = 3`` will have any effect in the Emacs Lisp space: this would
merely change the Python variable ``result``, which was a reference to a
:code:`Symbol` instance, so it is now a reference to the number 3.
The :code:`Symbol` class has ``value()`` and ``copy()`` methods. One
can use either ``lisp.SYMBOL.value()`` or ``lisp.SYMBOL.copy()``
to access the Emacs Lisp value of a symbol, after conversion to
some Python object, of course. However, if ``value()`` would have
given an Emacs Lisp handle, ``lisp.SYMBOL.copy()`` has the effect of
``lisp.SYMBOL.value().copy()``, that is, it returns the value of the
symbol as opened as possible.
A symbol may also be used as if it was a Python function, in which case
it really names an Emacs Lisp function that should be applied over the
following function arguments. The result of the Emacs Lisp function
becomes the value of the call, with all due conversions of course.
Dynamic bindings
----------------
As Emacs Lisp uses dynamic bindings, it is common that Emacs Lisp
programs use :code:`let` for temporarily setting new values for some
Emacs Lisp variables having global scope. These variables recover their
previous value automatically when the :code:`let` gets completed, even
if an error occurs which interrupts the normal flow of execution.
Pymacs has a :code:`Let` class to represent such temporary
settings. Suppose for example that you want to recover the value of
``lisp.mark()`` when the transient mark mode is active on the Emacs Lisp
side. One could surely use ``lisp.mark(True)`` to *force* reading the
mark in such cases, but for the sake of illustration, let's ignore that,
and temporarily deactivate transient mark mode instead. This could be
done this way::
try:
let = Let()
let.push(transient_mark_mode=None)
... USER CODE ...
finally:
let.pop()
``let.push()`` accepts any number of keywords arguments. Each keyword
name is interpreted as an Emacs Lisp symbol written the Pymacs way, with
underlines. The value of that Emacs Lisp symbol is saved on the Python
side, and the value of the keyword becomes the new temporary value for
this Emacs Lisp symbol. A later ``let.pop()`` restores the previous
value for all symbols which were saved together at the time of the
corresponding ``let.push()``. There may be more than one ``let.push()``
call for a single :code:`Let` instance, they stack within that instance.
Each ``let.pop()`` will undo one and only one ``let.push()`` from the
stack, in the reverse order or the pushes.
A single call to ``let.pops()`` automatically does all pending
``let.pop()`` at once, in the correct reverse order. When the
:code:`Let` instance disappears, either because the programmer does
``del let`` or ``let = None``, or just because the Python :code:`let`
variable goes out of scope, ``let.pops()`` gets executed under the
scene, so the :code:`try`/:code:`finally` statement may be omitted in
practice. For this omission to work flawlessly, the programmer should
be careful at not keeping extra references to the :code:`Let` instance.
The constructor call ``let = Let()`` also has an implied initial
``.push()`` over all given arguments, given there is any, so the
explicit ``let.push()`` may be omitted as well. In practice, this sums
up and the above code could be reduced to a mere::
let = Let(transient_mark_mode=None)
... USER CODE ...
Be careful at assigning the result of the constructor to some Python
variable. Otherwise, the instance might disappear immediately after
having been created, restoring the Emacs Lisp variable much too soon.
Any variable to be bound with :code:`Let` should have been bound in
advance on the Emacs Lisp side. This restriction usually does no kind
of harm. Yet, it will likely be lifted in some later version of Pymacs.
The :code:`Let` class has other methods meant for some macros which are
common in Emacs Lisp programming, in the spirit of :code:`let` bindings.
These method names look like ``push_*`` or ``pop_*``, where Emacs Lisp
macros are ``save-*``. One has to use the matching ``pop_*`` for
undoing the effect of a given ``push_*`` rather than a mere ``.pop()``:
the Python code is clearer, this also ensures that things are undone in
the proper order. The same :code:`Let` instance may use many ``push_*``
methods, their effects nest.
``push_excursion()`` and ``pop_excursion()`` save and restore
the current buffer, point and mark. ``push_match_data()`` and
``pop_match_data()`` save and restore the state of the last regular
expression match. ``push_restriction()`` and ``pop_restriction()`` save
and restore the current narrowing limits. ``push_selected_window()`` and
``pop_selected_window()`` save and restore the fact that a window holds
the cursor. ``push_window_excursion()`` and ``pop_window_excursion()``
save and restore the current window configuration in the Emacs display.
As a convenience, ``let.push()`` and all other ``push_*`` methods return
the :code:`Let` instance. This helps chaining various ``push_*`` right
after the instance generation. For example, one may write::
let = Let().push_excursion()
if True:
... USER CODE ...
del let
The ``if True:`` (use ``if 1:`` with older Python releases, some people
might prefer writing ``if let:`` anyway), has the only goal of indenting
:var:`USER CODE`, so the scope of the :code:`let` variable is made very
explicit. This is purely stylistic, and not at all necessary. The last
``del let`` might be omitted in a few circumstances, for example if the
excursion lasts until the end of the Python function.
Raw Emacs Lisp expressions
--------------------------
Pymacs offers a device for evaluating a raw Emacs Lisp expression, or a
sequence of such, expressed as a string. One merely uses :code:`lisp`
as a function, like this::
lisp('''
...
POSSIBLY-LONG-SEQUENCE-OF-LISP-EXPRESSIONS
...
''')
The Emacs Lisp value of the last or only expression in the sequence
becomes the value of the :code:`lisp` call, after conversion back to
Python.
User interaction
----------------
Emacs functions have the concept of user interaction for completing the
specification of their arguments while being called. This happens only
when a function is interactively called by the user, it does not happen
when a function is directly called by another. As Python does not have
a corresponding facility, a bit of trickery was needed to retrofit that
facility on the Python side.
After loading a Python module but prior to creating an Emacs view
for this module, Pymacs decides whether loaded functions will be
interactively callable from Emacs, or not. Whenever a function has
an :code:`interaction` attribute, this attribute holds the Emacs
interaction specification for this function. The specification is
either another Python function or a string. In the former case, that
other function is called without arguments and should, maybe after
having consulted the user, return a list of the actual arguments to be
used for the original function. In the latter case, the specification
string is used verbatim as the argument to the ``(interactive ...)``
function on the Emacs side. To get a short reminder about how this
string is interpreted on the Emacs side, try ``C-h f interactive RET``
within Emacs. Here is an example where an empty string is used to
specify that an interactive has no arguments::
from Pymacs import lisp
def hello_world():
"`Hello world' from Python."
lisp.insert("Hello from Python!")
hello_world.interaction = ''
.. `
Versions of Python released before the integration of PEP 232 do not
allow users to add attributes to functions, so there is a fall-back
mechanism. Let's presume that a given function does not have an
:code:`interaction` attribute as explained above. If the Python module
contains an :code:`interactions` global variable which is a dictionary,
if that dictionary has an entry for the given function with a value
other than :code:`None`, that function is going to be interactive on the
Emacs side. Here is how the preceding example should be written for an
older version of Python, or when portability is at premium::
from Pymacs import lisp
interactions = {}
def hello_world():
"`Hello world' from Python."
lisp.insert("Hello from Python!")
interactions[hello_world] = ''
One might wonder why we do not merely use ``lisp.interactive(...)``
from within Python. There is some magic in the Emacs Lisp interpreter
itself, looking for that call *before* the function is actually entered,
this explains why ``(interactive ...)`` has to appear first in an Emacs
Lisp :code:`defun`. Pymacs could try to scan the already compiled
form of the Python code, seeking for ``lisp.interactive``, but as the
evaluation of :code:`lisp.interactive` arguments could get arbitrarily
complex, it would a real challenge un-compiling that evaluation into
Emacs Lisp.
Key bindings
------------
An interactive function may be bound to a key sequence.
To translate bindings like ``C-x w``, say, one might have to know a
bit more how Emacs Lisp processes string escapes like ``\C-x`` or
``\M-\C-x`` in Emacs Lisp, and emulate it within Python strings, since
Python does not have such escapes. ``\C-L``, where L is an upper case
letter, produces a character which ordinal is the result of subtracting
0x40 from ordinal of ``L``. ``\M-`` has the ordinal one gets by adding
0x80 to the ordinal of following described character. So people can
use self-inserting non-ASCII characters, ``\M-`` is given another
representation, which is to replace the addition of 0x80 by prefixing
with Escape, that is 0x1b. So ``\C-x`` in Emacs is ``\x18`` in Python.
This is easily found, using an interactive Python session, by giving it:
``chr(ord('X') - ord('A') + 1)``.
An easier way would be using the :code:`kbd` function on the Emacs Lisp
side, like with ``lisp.kbd('C-x w')`` or ``lisp.kbd('M-<f2>')``.
To bind the F1 key to the :code:`helper` function in some
:code:`module`::
lisp.global_set_key((lisp.f1,), lisp.module_helper)
``(item,)`` is a Python tuple yielding an Emacs Lisp vector.
``lisp.f1`` translates to the Emacs Lisp symbol :code:`f1`. So, Python
``(lisp.f1,)`` is Emacs Lisp ``[f1]``. Keys like ``[M-f2]`` might
require some more ingenuity, one may write either ``(lisp['M-f2'],)`` or
``(lisp.M_f2,)`` on the Python side.
Debugging
=========
Finding bugs in a program is an art, which may be difficult enough
already when there is a single process and a single language. Pymacs
involves a part (usually short) written in Emacs Lisp and another part
(usually more substantial) written in Python, each running in their
own process. Both processes communicate which each other. Moreover,
to get debugging hints, Emacs is often the necessary door by which the
programming user may catch glimpses on what is happening on both sides.
To effectively debug Pymacs code, one benefits from having some
familiarity with the communication protocol, and also from knowing
how to observe both sides of this protocol at once. The usual way is
through the :code:`*Pymacs*` buffer within Emacs, which shows an Emacs
view the whole protocol. One may also view by forcing the Pymacs helper
to save a trace file, which shows a Python view the whole protocol —
unless there are communication errors, this should tell the same story
as with the :code:`*Pymacs*` buffer. These few topics are developed
in the three following sections. The remaining sections address more
specific issues about Emacs Lisp or Python debugging.
The communication protocol
--------------------------
The Pymacs communication protocol is rather simple deep down, merely
using evaluation on arrival on both sides. All the rest is recursion
trickery over that simple idea.
+ It is more easy to generate than to parse. Moreover, Emacs has a Lisp
parser and Python has a Python parser. So, when preparing a message
to the Pymacs helper, Emacs generates Python code for Python to parse,
and when preparing a message for Emacs, Python generates Emacs Lisp
expressions for Emacs to parse.
+ Messages are exchanged in strictly alternating directions (from Python
to Emacs, from Emacs to Python, etc.), the first message being sent
by the Pymacs helper (from Python to Emacs) just after it started,
identifying the current Pymacs version.
+ Messages in both directions have a similar envelope. Each physical
message has a prefix, the message contents, and a newline. The prefix
starts with either ``<`` or ``>`` to mark the directionality, is
followed by the decimal expression of the contents length counted in
characters, and terminates with a single horizontal tab. The count
excludes the prefix, but includes the newline.
+ In each direction, messages are made up of two elements: an action
keyword and a single argument (yet the argument may sometimes be
complex). As a special case, memory cleanup messages from Python to
Emacs use four elements: the atom :code:`free`, a list of slot numbers
to free, and then the real action and argument. This is because the
cleanup is delayed and piggy-backed over some other message.
+ For Emacs originated messages, the action and the argument are
separated by a space. For Python originated messages, the action and
the argument are made into a Lisp list.
+ Most actions in the following table are available in both
directions, unless noted. The first three actions *start* a new level
of Pymacs evaluation, the two remaining actions end the current level.
+ :code:`eval` requests the evaluation of its expression argument.
+ :code:`exec` requests the execution of its statement argument (this may
only be received on the Python side).
+ :code:`expand` requests the opening of an Emacs Lisp structure (this may
only be received on the Emacs side).
+ :code:`return` represents the normal reply to a request, the argument
holds the value to be returned (:code:`nil` in case of :code:`exec`).
+ :code:`raise` represents the error reply to a request, the argument
then holds a diagnostic string.
Python evaluation is done in the context of the :code:`Pymacs.pymacs`
module. On the Emacs Lisp side, there is no concept of module name
spaces, so we internally use the ``pymacs-`` prefix as an attempt to
stay clean. Users should ideally refrain from naming their Emacs Lisp
objects with a ``pymacs-`` prefix.
The protocol may be fragile to interruption requests, so it tries to
recognize each message action before evaluation is attempted. The idea
(not fully implemented yet) is to make the protocol part immune to
interruptions, but to allow evaluations themselves to be interrupted.
The :code:`*Pymacs*` buffer
---------------------------
Emacs and Python are two separate processes (well, each may use more
than one process). Pymacs implements a simple communication protocol
between both, and does whatever needed so the programmers do not have
to worry about details. The main debugging tool is the communication
buffer between Emacs and Python, which is named :code:`*Pymacs*`.
As it is sometimes helpful to understand the communication protocol, it
is briefly explained here, using an artificially complex example to do
so. Consider (this example assumes Python 2)::
(pymacs-eval "lisp('(pymacs-eval \"repr(2L**111)\")')")
"2596148429267413814265248164610048L"
Here, Emacs asks Python to ask Emacs to ask Python for a simple bignum
computation. Note that Emacs does not natively know how to handle big
integers, nor has an internal representation for them. This is why I
use the :code:`repr` function, so Python returns a string representation
of the result, instead of the result itself. Here is a trace for this
example. Imagine that Emacs stands on the left and that Python stands
on the right. The ``<`` character flags a message going from Python to
Emacs, while the ``>`` character flags a message going from Emacs to
Python. The number gives the length of the message, including the end
of line. (Acute readers may notice that the first number is incorrect,
as the version number gets replaced in the example while this manual is
being produced.)
::
<22 (version "0.25")
>43 eval lisp('(pymacs-eval "repr(2L**111)")')
<45 (eval (progn (pymacs-eval "repr(2L**111)")))
>19 eval repr(2L**111)
<47 (return "2596148429267413814265248164610048L")
>45 return "2596148429267413814265248164610048L"
<47 (return "2596148429267413814265248164610048L")
Part of the protocol manages memory, and this management generates some
extra-noise in the :code:`*Pymacs*` buffer. Whenever Emacs passes a
structure to Python, an extra pointer is generated on the Emacs side to
inhibit garbage collection by Emacs. Python garbage collector detects
when the received structure is no longer needed on the Python side, at
which time the next communication will tell Emacs to remove the extra
pointer. It works symmetrically as well, that is, whenever Python
passes a structure to Emacs, an extra Python reference is generated to
inhibit garbage collection on the Python side. Emacs garbage collector
detects when the received structure is no longer needed on the Emacs
side, after which Python will be told to remove the extra reference.
For efficiency, those allocation-related messages are delayed, merged
and batched together within the next communication having another
purpose.
Variable :code:`pymacs-trace-transit` may be modified for controlling
how and when the :code:`*Pymacs*` buffer, or parts thereof, get erased.
By default, this buffer gets erased before each transaction. To make
good debugging use of it, first set :code:`pymacs-trace-transit` to
either :code:`t` or to some ``(KEEP . LIMIT)``.
Debugging the Pymacs helper
---------------------------
The Pymacs helper is a Python program which accepts options and arguments.
The available options, which are only meant for debugging, are:
-d FILE Debug the protocol to FILE
-s FILE Trace received signals to FILE
+ The ``-d`` option saves a copy of the communication protocol in the
given file, as seen from the Pymacs helper. The file should be fairly
identical to the contents of the :code:`*Pymacs*` buffer within Emacs.
+ The ``-s`` option monitors most signals received by the Pymacs helper
and logs them in the given file. Each log line merely contains a signal
number, possibly followed by a star if the interruption was allowed in.
Besides logging, signals are usually ignored.
The arguments list directories to be added at the beginning of the
Python module search path, and whenever Emacs launches the Pymacs
helper, the contents of the Emacs Lisp :code:`pymacs-load-path` variable
is turned into this argument list.
The Pymacs helper options may be set through the :code:`PYMACS_OPTIONS`
environment variable. For example, one could execute something like::
export PYMACS_OPTIONS='-d /tmp/pymacs-debug -s /tmp/pymacs-signals'
in a shell (presuming :code:`bash` here) and start Emacs from that
shell. Then, when Emacs launches the Pymacs helper, the above options
are transmitted to it.
Emacs usual debugging
---------------------
If cross-calls between Emacs Lisp and Python nest deeply, an error will
raise successive exceptions alternatively on both sides as requests
unstack, and the diagnostic gets transmitted back and forth, slightly
growing as we go. So, errors will eventually be reported by Emacs. I
made no kind of effort to transmit the Emacs Lisp back trace on the
Python side, as I do not see a purpose for it: all debugging is done
within Emacs windows anyway.
On recent Emacses, the Python back trace gets displayed in the
mini-buffer, and the Emacs Lisp back trace is simultaneously shown
in the :code:`*Backtrace*` window. One useful thing is to allow to
mini-buffer to grow big, so it has more chance to fully contain the
Python back trace, the last lines of which are often especially useful.
Here, I use::
(setq resize-mini-windows t
max-mini-window-height .85)
in my :file:`.emacs` file, so the mini-buffer may use 85% of the screen,
and quickly shrinks when fewer lines are needed. The mini-buffer
contents disappear at the next keystroke, but you can recover the Python
back trace by looking at the end of the :code:`*Messages*` buffer. In
which case the :code:`ffap` package in Emacs may be yet another friend!
From the :code:`*Messages*` buffer, once :code:`ffap` activated, merely
put the cursor on the file name of a Python module from the back trace,
and ``C-x C-f RET`` will quickly open that source for you.
Python usual debugging
----------------------
A common way to debug a Python script is to spread it with :code:`print`
commands. When such a Python script is executed under Pymacs control,
these :code:`print` statements display the results right within the
:code:`*Pymacs*` buffer, and may be observed there.
As such output gets intermixed with the Pymacs protocol itself, never
ever print the symbol ``<``, immediately followed by the expression of a
decimal number, immediately followed by a horizontal tab (``\t``). If
you were doing so, the communication protocol would get pretty mixed up,
and Pymacs would break. But you do not have to worry much about this:
the forbidden sequence is unlikely in practice, would it be only because
people do not often use horizontal tabs anymore — oh, tabs were once
undoubtedly popular, but this was many years ago…
Auto-reloading on save
----------------------
I found useful to automatically :code:`pymacs-load` some Python files
whenever they get saved from Emacs. This can be decided on a per-file
or per-directory basis. To get a particular Python file to be reloaded
automatically on save, add the following lines at the end::
# Local Variables:
# pymacs-auto-reload: t
# End:
Here is an example of automatic reloading on a per-directory basis.
The code below assumes that Python files meant for Pymacs are kept in
:file:`~/share/emacs/python`::
(defun fp-maybe-pymacs-reload ()
(let ((pymacsdir (expand-file-name "~/share/emacs/python/")))
(when (and (string-equal (file-name-directory buffer-file-name)
pymacsdir)
(string-match "\\.py\\'" buffer-file-name))
(pymacs-load (substring buffer-file-name 0 -3)))))
(add-hook 'after-save-hook 'fp-maybe-pymacs-reload)
Administrative miscellany
=========================
Development history
-------------------
I once hungered for a Python-extensible editor, so much so that I
pondered the idea of dropping Emacs for other avenues, but found nothing
much convincing. Moreover, looking at all Lisp extensions I'd made
for myself, and considering all those superb tools written by others,
all of which are now part of my computer life, it would have been a
huge undertaking for me to reprogram these all in Python. So, when I
began to see that something like Pymacs was possible, I felt strongly
motivated! :-)
Pymacs draws on previous work of Cedric Adjih that enabled
the running of Python as a process separate from Emacs.
See http://www.crepuscule.com/pyemacs/, or write Cedric at
mailto:adjih-pam@crepuscule.com. Cedric presented :code:`pyemacs` to me
as a proof of concept. As I simplified that concept a bit, I dropped
the ``e`` in ``pyemacs`` :-). Cedric also previously wrote patches for
linking Python right into XEmacs, but abandoned the idea, as he found
out that his patches were unmaintainable over the evolution of both
Python and XEmacs.
As Brian McErlean independently and simultaneously wrote a tool
similar to this one, we decided to merge our projects. In an amusing
coincidence, he even chose :code:`pymacs` as a name. Brian paid
good attention to complex details that escaped my courage, so his
help and collaboration have been beneficial. You may reach Brian at
mailto:brianmce@crosswinds.net.
The initial throw at Pymacs has been written on 2001-09-05, and releases
in the 0.x series followed in a rapid pace for a few months, and Pymacs
soon became stable. Reported bugs or suggestions were minor, and the
feature set was fairly usable from the start. For a long while, there
was not enough new material to warrant other releases.
Later, someone begged me to consider Vim, and not only Emacs, for some
tools I was then writing (in the area of musical scores). Looking at
Vim more closely, I discovered that it is a worth editor, with Python
nicely integrated, enough for me to switch. In a `Web article`__ (which
many enjoyed, as they told me), I detailed my feelings on these matters.
__ http://pinard.progiciels-bpi.ca/opinions/editors.html
I switched from Emacs to Vim in my day-to-day habits, and because of
this, felt that Pymacs needed a more credible maintainer than me. Syver
Enstad, who was an enthusiastic user and competent contributor, was kind
enough to accept the duty (2003-10). Syver then became unavailable,
to the point I could not contact him in years. I would loathe to see
myself interfering with an official maintainer, but after I decided to
return to some moderate Emacs usage, and because of the long silence, I
considered resuming Pymacs maintenance (2007-11), and did it (2008-01).
Giovanni Giorgi once (2007-03) wanted to expand on Pymacs and publish
it on his own, and later felt like maintaining it whole (late 2007-12).
I rather suggested an attempt at collaborative maintenance, and this
experiment is still going on...
Should it come with Emacs?
--------------------------
Gerd Möllman, who was maintaining Emacs at the time of Pymacs birth and
development, retrofitted (2001-09) the idea of a :code:`post-gc-hook`
from XEmacs, as a way to facilitate memory management within Pymacs.
Richard Stallman once suggested (2001-10) that Pymacs be distributed
within Emacs, and while discussing the details of this, I underlined
small technical difficulties about Emacs installing the Python parts,
and the need of a convention about where to install Python files meant
for Pymacs. As Richard felt, at the time, very overwhelmed with other
duties, no decision was taken and the integration went nowhere.
After Gerd resigned as an Emacs maintainer, someone from the Emacs
development team wrote again (2002-01) asking information about how
to integrate Pymacs. It was easy for me to write a good and thorough
summary, after all these discussions with Richard. And that's the end
of the story: I never heard of it again. :-)
The future of Pymacs
--------------------
Some people suggested important internal Pymacs changes. In my opinion,
new bigger features are better implemented in a careful way, first as
examples or contributions, and moved closer to internal integration
depending on how users use or appreciate them. For now, Pymacs should
concentrate at doing its own humble job well, and resist bloat.
Before Pymacs closes to some version 1.0, some specifications should be
revisited, user suggestions pondered, porting matters documented. The
test suite should grow up, we should collect more examples. Pymacs
should aim seamless integration with :file:`.el` files and with
transparent :code:`autoload` (my little tries were not so successful).
On the Python side, Pymacs *might* fake primitives like :code:`getindex`
and :code:`putindex`, and better support iterators and some newer Python
features.
Pymacs is not much geared towards Python threads. It is not clear yet if
it would be reasonably tractable to better support them.
Technical miscellany
====================
Known bugs or limitations
-------------------------
What is the difference between a bug and a limitation? *Limitations*
are either bugs not worth repairing, or else, bugs that we do not know
yet how to repair. While documenting a bug is indeed a way to postpone
its solution, it does not necessarily turns it into a limitation.
On a mailing list I once closely followed, a few maintainers were
getting very, very upset whenever the word *bug* happened to be used
in any message, especially if the bug was documented. A distinguished
member on this list (William N. Venable) coined the wonderful word
*unfelicity*, as a way to discuss problems while avoiding human damage.
Such delicacies are surely unneeded for Pymacs. A bug is a bug!
Needed control on stack unwinding
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
As Ali Gholami Rudi nicely summarized it (2008-02-12):
`Lisp programmers could use` :code:`inhibit-quit` `at various levels
of recursion, and use Pymacs at these various levels. As an Emacs`
:code:`quit` `might propagate out of the stack, but stopping at
various levels of it when the Lisp programmers took measures for it, I
think there is no choice that finding some mechanism by which Python
will unstack in parallel with Emacs, that is, no more and no less, so
if Emacs resumes processing at some intermediate level, Python should
be ready at the exact corresponding level on its side.`
By doing ``pymacs-eval "(time.sleep(10))"``, and quitting, I once saw
that:
+ Emacs does not interrupt at once, and if :code:`inhibit-quit`
remains set while Emacs waits for the Pymacs helper, this is surely
not user friendly!
+ At the end of the wait, I get a spurious IO error (I do not know
where it comes from).
Possible memory leak
,,,,,,,,,,,,,,,,,,,,
Memory may leak in some theoretical circumstances (I say theoretical,
because no one ever reported this as being an actual problem). As
Richard Stallman once put it (2002-08):
`I wonder, though, can this` [memory management] `technique fully handle
cycles that run between Lisp and Python? Suppose Lisp object A refers
to Python object B, which refers to Lisp object A, and suppose nothing
else refers to either one of them. Will you succeed in recognizing
these two objects as garbage?`
Death from a Ctrl-C
,,,,,,,,,,,,,,,,,,,
Ali Gholami Rudi notices (2008-02-20) that Pymacs dies over::
M-x pymacs-eval RET lisp.kbd('C-c r r') RET
as there is a ``Ctrl-C`` in the value returned from Emacs.
Suggestions to ponder
---------------------
Python-driven Pymacs
,,,,,,,,,,,,,,,,,,,,
I guess the most important improvement we could think to Pymacs would be
some machinery by which Python programs, started outside Emacs, could
access Pymacs, once it started. That could be useful at least for
testing or debugging, and maybe for more serious work as well. These
are mere thoughts, I do not plan working at this soon, unless I have an
actual need. But if the challenge interests someone, please go ahead!
Here is how it could go. Pymacs has a Python interpreter running as a
sub-process of Emacs. In fact, Emacs loads :file:`pymacs.el`, which
in turn gets Python to execute :file:`Pymacs.py`, and both communicate
afterwards. :file:`Pymacs.py` is only active whenever :file:`pymacs.el`
calls it, otherwise it is blocked. :file:`Pymacs.py` could, under some
option, start another thread within itself. The initial thread would
block waiting for Emacs, as usual. The second thread would block
waiting to serve any Python client wanting to access Emacs. When this
occurs, the second thread would queue a request for the first thread,
and then send a signal to Emacs so it triggers a Pymacs communication.
At each communication opportunity, the first thread on the Python side
might fully service the queue from the second thread.
Autoloading interface
,,,,,,,,,,,,,,,,,,,,,
I once tried better interfacing to :code:`autoload`, and failed. It got
more intricate that I thought it would be. I might revisit this, but in
low priority.
In the meantime, one may use a small :file:`.el` file, like this one, on
the Emacs load path::
# File zorglub.el — just load zorglub.py.
(pymacs-load "zorglub")
(provide 'zorglub)
and then use either one of::
(require 'zorglub) ; in Lisp
lisp.require(lisp.zorglub) # in Python
at the beginning of body for any function needing functions from
:file:`zorglub.py`. One may also write one or many::
(autoload 'FUNCTION-NAME "zorglub" nil t)
to indirectly autoload :file:`zorglub.py` as needed.
Handling more special forms
,,,,,,,,,,,,,,,,,,,,,,,,,,,
The discussion started about the lack of specific Pymacs support, on
the Python side, for the Emacs Lisp :code:`setq-default` function.
People also mentioned :code:`defvar` and :code:`defcustom`, but there
are really many other special forms in Emacs Lisp. (A special form is
any expression form in which all arguments are not all blindly evaluated
before the function actually enters. The function then receives the
arguments unevaluated, and it is its responsibility to choose which
arguments should be evaluated, and when.)
The fact is that, besides :code:`setq` and some forms of :code:`defun`,
functions, few special forms are supported in Pymacs. One may think of
:code:`let`, functions like :code:`save-excursion`, etc. But that's
all, and maybe debatable as too much already. The real problem to solve
is supporting special forms (and macros) at Pymacs level. If we create
special cases in Pymacs for each special form we happen to stumble upon,
Pymacs might loose its elegance, and so, we have to stay a bit careful.
All special forms require that the user somehow defeat the fact that
Pymacs evaluate all function arguments before calling a Lisp function.
I realise it might be a subtle point for people unfamiliar with
Lisp. :code:`apply` on the Lisp side applies a function on a list of
arguments, so the trick is to evaluate on the Python side something
yielding a list, the contents of which are to be actual arguments. I'm
not fully sure this is the good direction to take, even if easy — I
mean here, that the real problem to solve is something else.
On a related matter, Ali Gholami Rudi suggested that Pymacs supports Emacs
so-called *keyword arguments*, and even provide a simple patch to do so::
diff --git a/Pymacs.py b/Pymacs.py
--- a/Pymacs.py
+++ b/Pymacs.py
@@ -453,13 +453,16 @@
write(') nil)')
lisp._eval(''.join(fragments))
- def __call__(self, *arguments):
+ def __call__(self, *arguments, **keywords):
fragments = []
write = fragments.append
write('(%s' % self.text)
for argument in arguments:
write(' ')
print_lisp(argument, write, True)
+ for kwd, value in keywords.items():
+ write(' :%s ' % kwd)
+ print_lisp(value, write, True)
write(')')
return lisp._eval(''.join(fragments))
So far that I understand, there are just no keyword arguments in Emacs.
Keywords might be nothing but a mirage created by :code:`defcustom`
only (maybe through :code:`define-minor-mode`) and :code:`defstruct`
-- is there any other usage for keywords? So I wonder if this unusual
trickery, not even a real part of Emacs Lisp, is important enough to
warrant modifying something as fundamental as :code:`__call__` in
Pymacs. Part of my reluctance might also come from my (unsubstanciated)
fear that the above change would slow down the hearth of Pymacs.
For now at least, users are invited to use ``lisp(...)`` for all other
special forms. It's simple, it's rather safe. Things like::
lisp('(setq-default %s %s)' % (name, value))
are not so horrible... :-) Deep down, ``lisp()`` calls are what Pymacs
do all the time under the table, all the rest are bits of sugar. What
would be needed is a visit to this special form support with wider
eyes and mind, come up with a general unifying solution, rather than
multiplying special cases.
Support for Python dictionaries
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
While Pymacs mirrors Python tuples and lists into Emacs Lisp vectors and
lists, it has nothing currently to reflect Python dictionaries.
It has been suggested to use Emacs Lisp alists to do so, but this does
not seem adequate to me. Pymacs 0.0 and 0.1 did convert Python
dicts to Emacs Lisp alists. This was a mere toy to get experience with
the Pymacs mechanics, not a serious idea. Despite I wanted *something*
for Python dicts, this choice was not very satisfying:
+ Dicts access speed are O(1); alists are O(N).
+ Dicts have no intrinsic order; alists are really a sequence.
+ Dicts have no duplicate keys; alists may have shadows.
The last two points, in particular, have the consequence that one cannot
convert back and forth from Lisp and have results which compare with
``(equal ...)``. This makes the equivalence especially ugly. Proper
lists and vectors in Lisp can be converted back and forth to Python
and be ``(equal ...)``, so those equivalences are bearable. The dict
conversion was withdrawn in Pymacs 0.2; I thought I should better
postpone until a better idea pops up, than let users develop habits with
something wrong and doomed to be replaced.
Emacs Lisp hash tables (as in Emacs 21) could be an acceptable
equivalent for Python dicts. This is what Brian McErlean did, and
suggests. My only reservation is about the Python need for non-mutable
keys, something which Emacs does not guarantee. As by default, from
Lisp to Python, references are transmitted instead of contents, this
would be a possible problem only when an expanded copy is requested from
the Python side. This would never be a problem going from Python to
Emacs, so far as I understand things now.
A nicer :code:`*Pymacs*` buffer
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
We might improve how the :code:`*Pymacs*` communication buffer looks.
Let's sketch this quickly, in any case, I'm not sure how worth this is.
The buffer might be turned into a more fully featured Emacs mode, so
it can benefit from highlighting and colourisation, and other goodies.
The first thing would be to install font-lock definitions. The second
thing would be to use indenting to show the proper nesting of calls
between Emacs and Python, in both directions. I would prefer this to be
done as a display feature, not as part of the communication protocol.
A third thing would be to automatically interpret object numbers on
both sides, replacing them with clearer text whenever possible — this
information may often be deduced from earlier communications. Finally,
that mode could allow for some inspection on Pymacs object and status,
and maybe also to control the external Python server described in
another suggestion in this series, if it ever gets implemented.
Speed issues
------------
Shoot out projects compare the relative speed of many popular languages,
and the relative merits of Lisp and Python might interest Pymacs users.
The first URL points to a version oriented towards Win32 systems, the
second is more recent but Debian-oriented:
+ http://dada.perl.it/shootout/index.html
+ http://shootout.alioth.debian.org/
I've not heard of any Python to Lisp compiler. Lisp may be slow or fast
depending on how one uses it, and how much one uses declarations. Some
Lisp systems have really excellent compilers, that give very fast code
when properly hinted.
Python itself may be slow or fast, once again depending on how one uses
it. With the proper bend, one can develop the habit of writing Python
which shows honest speed. And there is always Pyrex (and the very
similar Cython), which is Python complemented with explicit declarations
(a bit like some Lisp implementations), and which can buy a lot of
speed.
This is quite likely that one can have fast programs while using Python,
or a mix of Python and either Pyrex or Cython (or even Psyco sometimes),
that is, within Python paradigms, without feeling any need of resorting
to Lisp.
If Python looks like being slow while being used with Emacs, the problem
probably lies in Emacs-Python communication which Pymacs implements.
One has to learn how to do the proper compromises for having less
communications. (In that regard, Vim and Python are really linked
together, so Python in Vim is likely faster than Pymacs for someone who
does not pay special attention to such matters.)
Ali Gholami Rudi also writes (2008-02):
`Well, there seems to be lots of overhead when transferring large
strings. Transferring them requires:`
1. `escaping characters in the strings`
2. `putting them in` :code:`*Pymacs*` `buffer`
3. `sending the region to Python process`
4. `evaluating the Python string in Python-side (involves compiling)`
`In my experiments, transferring a ~5k-line file takes more than a
second on a relatively new computer (data from` :code:`rope-dev`\ `).
Improving that probably requires a new protocol that does not
use Python eval and has an optional debug buffer. Probably few
applications need to transfer large strings to Python but if they do,
it is quite slow.`
All in all, speed may sometimes become a real issue for Pymacs. I once
wrote within http://pinard.progiciels-bpi.ca/opinions/editors.html :
`While Pymacs is elegant in my opinion, one cannot effectively use
Pymacs (the Python part) without knowing at least the specification
of many Lisp functions, and I found that it requires some doing for a
Pymacs developer to decouple the Emacs interaction part from the purer
algorithmic part in applications. Moreover, if you do not consider
speed issues, they bite you.`
Vim-related thoughts
--------------------
Emacs Lisp is deeply soldered into Emacs internals. Vim has its own
language, which people sometimes call Vimscript, similarly tightened
into Vim. My feeling is that Emacs Lisp allows for a more intimate
handling of edit buffers and external processes than Vimscript does, yet
this intimacy has a price in complexity, so all totalled, they may be
perceived as comparable for most practical purposes.
Pymacs allows customising Emacs with Python instead of Emacs Lisp, and
then runs Python as a process external to Emacs, with a communication
protocol between both processes. Python may be built into Vim, and then
both Python and Vim use a single process. The same as Pymacs gives
access to almost all of Emacs Lisp, Python within Vim gives access to
almost all of Vimscript, but with a much smaller overhead than Pymacs.
Pymacs is not Emacs Lisp, and Python in Vim is not Vimscript either,
tweaks are needed in both cases for accessing some of the underlying
scripting facilities. Pymacs is rather elegant, Python in Vim is rather
clean. Python itself is both elegant and clean, but one strong point of
Python for me is the legibility, which builds deeper roots on the clean
side than on the elegant side. All in all, despite I know how debatable
it can be, I guess I now have a prejudice towards Python in Vim.
I figured out a simple way to have the same Python source usable both
within Pymacs or Vim. However, Emacs is byte oriented, while Vim is
line oriented. In a few Pymacs applications of mine, I internally
toggle between line orientation and byte orientation, keeping both for
speed most probably, while I see things would be a bit simpler (and
maybe slower) if I was pushing myself on the line-oriented side. Each
of Emacs and Vim have their own logic and elegance, and it is probable
that we loose overall if we try to emulate one with the other.
The idea traversed me to convert all the few Pymacs examples so they
work both for Pymacs and Vim, and through the documentation, publicise
how people writing Python extensions could write them for both editors
at once. Yet, while doing so, one has to stretch either towards Emacs
or Vim, and I guess I would favour Vim over Emacs when the time comes to
evaluate efficiency-related choices.
I also thought about writing a Pymacs module for running Python scripts
already written for Vim, by offering a compatibility layer. The
complexity of this might be unbounded, I should study actual Python
scripts for Vim before knowing better if this is thinkable or not.
