ChangeLog:
--------------------
[1.0.8] 2020-04-20
- Kaffeine output support was removed 6 years ago. Bring the docs up to speed.
[1.0.7] 2020-01-25
- fix "--output-initial"
[1.0.6] 2019-12-13
- re-enable VHF band III in Europe
[1.0.5] 2019-03-14
- added new arguments for isdb-tb tuners (tested with MyGica S2870 & PlayTV USB Hybrid PV-B308U)
[1.0.4] 2018-10-23
- replace country-based DVB-T skipping with new command line arguments:
-ft1 and -ft2 to scan only DVB-T or DVB-T2, respectively
[1.0.3] 2018-10-13, contributed by DF5EQ
- DVB-T scanning is skipped for AT, DE and CO
- DVB_T2 scanning is no longer skipped at all, but a mechanism is in place for
doing it by country
- PLP ID 1 is enabled for AT
- some manual code formatting in scan.c, where the line length limits of the
formatting script rendered the code hard to read
[1.0.2] 2018-06-17
- move the source files in a "src" subdirectory
- apply some of the Linux kernel coding style indentation using the Lindent
script from the kernel tree
- merge w_scan-20170107
[1.0.1] 2017-03-29
- fix a corner case where a pair of transponders kept adding each other to
the scanning loop, without ending up in any list we use for avoiding them
in the future. The end result was an endless loop. Thanks
https://github.com/mfyorp for reporting the bug and testing the fix.
[1.0.0] 2016-10-14
- project forked from http://wirbel.htpc-forum.de/w_scan/index2.html and renamed w_scan2
- keep duplicate transponders by default because a stronger transponder with
the same ID might have a higher frequency and be discarded simply because
it's scanned later. Also don't replace the current transponder with an
advertised one by default. The latter may have a lower signal strength.
More details here:
https://stefantalpalaru.wordpress.com/2016/02/04/scan-all-the-things/ .
The old behaviour can be enabled with -d (--delete-duplicate-transponders).
- all files are now ASCII or UTF-8 and have Unix line terminators
- refactored the autotools files
2015-01-01
- check data for descriptor 0x83 to be multiple of 4bytes;
On S4E8 0x83 seems to be used for something different as LCN and
caused segfault if read in 4byte packets.
May be this abuse of 0x83 renders parsing of LCN unusable at all.
- find_transponder_by_freq(): fix logging (add missing print_transponder() calls)
- emulated dvb device;
now accept DVB-S/S2 logs down to 20130331. However, logs earlier
than 20140529 are missing last two bytes in SI data hexdumps. :(
- modify scan algorithm for tsid, onid, nid;
On S4E8, PAT transports wrong transport_stream_id - and therefore
scan was endless loop. :(
This was actually not an w_scan error, it is an error in sats si
tables.
1. find_transponder()
- now do a strict check for (ONID,NID,TSID); check all 3 pids.
2. check_duplicate_transponders()
- copy NIT updated tp props from deleted tp to remaining tp,
if remaining tp was not yet updated. Sync ids as well.
- new function copy_duplicate_tp() to not have this copy several times.
3. parse_pat()
- update tsid for TERR scans only. On terr scans, freq may be '0' or
completely wrong in NIT and find_transponder_by_freq() cannot find
those transponders otherwise.
4. parse_nit()
- move update of (ONID,NID,TSID) to later position, where also tp props
are updated. Code easier to read this way.
- call check_duplicate_transponders() as soon as new tp was added from
NIT.
5. tune_to_transponder()
- add missing polarization check for sat - this one is a bug fix.
- vdr output: update translation table for satname: w_scan <-> VDR
- scr_cmd: fix FE_DISEQC_SEND_MASTER_CMD data pointer.
- update S4E8 transponder list
2014-11-22
- move '-lrt' from LDFLAGS to AM_LDFLAGS
- move nested function LeapYear() outside modified_julian_date_to_utc()
- add stream_type 0x24 (HEVC)
- bug fix: on Finnish DVBT/T2 network, 'other terrestrial frequencies' are
signalled by other_frequency flag, but not transmitted in NIT.
If those freqs could not be tuned due to bad reception, w_scan gets in
an endless loop; fix it. Thanks to Olli Salonen for report and help
debugging on remote side.
2014-07-27
- for changes against 20140118, see
* 2014-07-12 (dev)
* 2014-06-28 (dev)
* 2014-05-29 (dev)
* 2014-04-23 (dev)
2014-07-12 (dev)
- alloc_transponder(): check for polarization on sat.
- update S19E2, based on emulated scan with logfiles
from easy-vdr.de developers.
- move freq calculations from Hz to MHz to separate func
- if tuning fails on on any tp; instead of simply retrying with same
settings -> redo with as much as possible params to AUTO. On some
wrong NIT tables, params are just wrong, this *may* help in some cases.
- start reworking VLC xspf playlist:
* validate using http://validator.xspf.org/
(NOTE: VLC-2.1.4 saved DVB xspf doesnt conform to XSPF)
* compare to VLC-2.1.4
* test VLC DVBT on Win64 using BDA
2014-06-28 (dev)
- new contact email address
- fix compile warnings reported by A.Palosaari in parse-dvbscan.c
- improve DVB-T/T2 scans for Finland, thanks to A.Palosaari,
now doing separate DVB-T2 loop for terr scans.
- add generic w_scan XML output format, to be used for data exchange
with w_scan.
- frequency_list_descriptor: dont ignore coding_type
- simplify struct transponder
- add long commandline arguments (short ones are still working.)
- new double linked lists (foreseen to be sortable later.)
- new: logical_channel_descriptor
- add dvb device emulation for debugging based on logfiles (developer use only.)
- new signal detection
2014-05-29 (dev)
- fix scr freq rounding
2014-04-23 (dev)
- add JESS/EN50607 && refactor EN50494
- add Australia single LO LNB. Thanks to Martin Lang.
- modify initial tuning data output to put plp_id as last item
- remove kaffeine output as its no longer possible to support it
- add fflush command for stderr && stdout
2014-01-18
- improve scr
- rewrite setup_scr()
- take VCO offset caused by 4MHz step size into account.
- check return value in set_frontend()
- reduce delay after setting 18V LNB voltage to 5msec
- reduce diseqc repeat to 100ms
- remove a few comments and debug stuff
- still experimental, waiting for tests - if you own such devices, pls send
me logs: 'w_scan -fs -s SXXX (..) -u<ID>:<USERBAND>:<A|B> 2>&1 | tee log.txt'
- VLC xspf
- remove unused stuff && started to adopt to current vlc;
but no doc avail for this VLC file format. :(
- Sat scan: add missing check of setup_switch() return value.
2014-01-02
- add experimental(!) support for scr.
i dont have spec && need testers for EN50494 for proper support.
2013-10-31
- update 19,2E, 23,5E, 28,2E. Thanks to John Horck.
2013-03-31
- adapt to vdr next version number, skipping support for vdr < 1.7.4
- fix compiling for newer frontend.h
- apply small other patches since 2012-11-11
2012-11-11
- apply patch from Michael Stilmant, who discovered two string buffers
being too small by one byte.
2012-06-05
- since some dvb drivers are buggy and dont tune DVB-S with ROLLOFF_AUTO,
therefore now explictly set ROLLOFF_35 in case of DVB-S. Thanks to R.Warsow
for report && testing.
NOTE: this is just a work-around for broken DVB-S drivers,
since DVB-S means by DVB standard *always* RO = 0.35
- print transponder data from satellite list during scan to make debug reports easier
to read
2012-05-25
- update all supported satellites
- add the following satellites:
* 180.0 east Intelsat 18
* 172.0 east GE 23
* 169.0 east Intelsat 5
* 162.0 east Superbird B2
* 154.0 east JCSAT 2A
* 144.0 east Superbird C2
* 134.0 east Telstar 18
* 134.0 east Apstar 6
* 132.0 east Vinasat 1 / JCSAT 5A
* 128.0 east JCSAT 3A
* 125.0 east ChinaSat 6A
* 124.0 east JCSAT 4A
* 122.2 east AsiaSat 4
* 118.0 east Telkom 2
* 116.0 east Koreasat 6 / ABS 7
* 115.5 east ChinaSat 6B
* 113.0 east Koreasat 5 / Palapa D
* 110.5 east ChinaSat 10
* 110.0 east NSat 110 / BSat 2C/3A / JCSat 110R
* 103.0 east Express A2
* 86.5 east KazSat 2
* 85.0 east Horisons 2 / Intelsat 15
* 30.5 east Arabsat 5A
* 20.0 east Arabsat 5C
* 3.0 east Eutelsat 3A/3C, Rascom 1R
* 31.5 west Intelsat 25
* 34.5 west Intelsat 903
* 37.5 west NSS 10 / Telstar 11N
* 40.5 west NSS 806
* 43.0 west Intelsat 11
* 45.0 west Intelsat 14
* 50.0 west Intelsat 1R
* 53.0 west Intelsat 707
* 55.5 west Intelsat 805
* 58.0 west Intelsat 9/16
* 63.0 west Telstar 14R
* 65.0 west Star One C1
* 70.0 west Star One C2
* 72.0 west AMC 6
* 78.0 west SIMON BOLIVAR
* 83.0 west AMC 9
* 84.0 west Brasilsat B4
* 85.0 west AMC 16
* 87.0 west SES 2
* 89.0 west Galaxy 28
* 95.0 west Nimiq 1
* 93.1 west Galaxy 25
* 95.0 west Galaxy 3C
* 99.2 west Galaxy 16 / Spaceway 2
* 101.0 west SES 1
* 103.0 west AMC 1
* 105.0 west AMC 15/18
* 107.3 west Anik F1/F1R
* 111.1 west Anik F2
* 113.0 west SatMex 6
* 116.8 west SatMex 5
* 119.0 west Anik F3
* 121.0 west Echostar 9 / Galaxy 23
* 123.0 west Galaxy 18
* 125.0 west Galaxy 14 / AMC 21
* 127.0 west Galaxy 13 / Horizons 1
* 131.0 west AMC 11
* 133.0 west Galaxy 15
* 135.0 west AMC 10
* 135.0 west AMC 7
* 135.0 west AMC 8
* 177.0 west NSS 9
- VLC xspf output: as VLC-2.x.x no longer supports comma (VLC-1.x.x did) but only colon
as separator, update xspf output format accordingly. Thanks to Jacek Sliwerski for
report && samples.
- increase max number of supported dvb adapters, based on a patch send by Julian Scheel.
- auto scan: /dev/dvb/adapter(0..15)
- by option -a <NUM>: /dev/dvb/adapter(0..31)
- blacklist ( = look for a better device on auto scan ) Pinnacle PCTV 290e for cable:
- known to have weakness on cable because of integrated preamp
- it's driver doesnt report symbolrates correctly.
- for terrestrial scan it's still a preferred device
- no longer distribute a precompiled version of w_scan inside package.
2012-04-15
- add a missing 'break' for initial tuning data on satellite,
reported by L. Dolezel
- rework audio language descriptor to avoid segfault,
reported by L. Dolezel
- add Israel DVB-T, requested by B. Nahari
- update S13E0 transponders
- fix bug introduced by 'transponder scan logic modified' in 20120128,
which prevents -x option on US vsb/qam, reported by 'locuse'
- add experimental cmake build support. For now building with autotools
is still the standard way, but if you want to test, use
cd w_scan-<VERSION>
mkdir build && cd build
cmake ..
make
make install
2012-01-28
- modify dvb api < 5.5 logic, to find out which delsys are supported by hw
- init-data: plot only verified data
- transponder scan logic modified:
- alloc_transponder(): add newly allocated transponder only to new_transponders,
if freq not yet known.
- tune_to_transponder(): add tuned transponder only to scanned_transponders,
if freq not yet known.
- find_transponder(): replaced by find_transponder_by_freq()
- TODO: check side effects on 2nd gen delsys
2012-01-12
- add hack to allow compile against api 5.3
2012-01-11
- initial DVB-T2 support. Thanks for testing, code snippets and suggestions to Rolf Ahrenberg.
- go back to allow to compile with DVB-API >= 5.3 and remove configure check (too early)
- add video type to vdr output
- change CAid to uppercase in vdr output
- restructure Parameter print inside vdr output
- add audio type and subtitling pids if vdr version > 1.7 (even if no '1.8.0' exists yet)
2012-01-08
- fix a few compiler warnings, reported by rofa
- fix configure script to check for DVB API >= 5.5 as reported by rofa
- copy current transponder before parsing NIT in case of terrestrial
since T2 delsys descriptor doesnt report all settings belonging to hardware.
2012-01-07
- big cleanup:
- no longer tune with dvb api 3.2 drivers (pls upgrade your drivers)
- remove all occurencies of..
- BANDWIDTH_*
- FE_QPSK
- FE_QAM
- FE_OFDM
- FE_ATSC
- remove #ifdef's for features in dvb api added before 5.5;
therefore: COMPILING NOW NEEDS DVB API 5.5 OR HIGHER !
- because ofdm is no longer used by DVB-T only, Satellite frontends not
only use QPSK, DVB-C2 will use OFDM similar to DVB-T(2):
- rename ofdm_* to terr_*
- rename qam_* to cable_*
- rename qpsk_* to sat_*
- rename tuning parameters
- prepare on newer desciptors:
- add T2_delivery_system_descriptor (untested - need testers)
- add C2_delivery_system_descriptor (no linux support yet at all)
- prepare on SH_delivery_system_descriptor (no functionality yet)
- add network_change_notify_descriptor (no functionality yet)
- prepare on DVB-T2 scan:
- add bandwidths 10MHz, 1,712MHz
- add FEC_3_5, FEC_4_5 (DVB-T2)
- add QAM256 to terrestrial scan (DVB-T2)
- add transmission modes 1k,16k,32k (DVB-T2)
- add guard interval 1/128, 19/128, 19/256
- add several new items to the internal transponder tuning data for later support of
DVB-C2 and DVB-T2
- now set plp_id during tune id terrestrial scan and delivery_system = SYS_DVBT2
- try to discover supported delivery_systems per frontend using new ioctl DTV_ENUM_DELSYS
if DVB driver has api version 5.5 or higher (fallback otherwise)
- now do CRC32 checks in w_scan and prolong timeouts if CRC failures
occur (may help in some cases if bad reception)
- extend output format for 'scan' initial_tuning_data to deal with
DVB-T2/DVB-C2.
- old: # T <freq> <bw> <fec_hi> <fec_lo> <mod> <tm> <guard> <hi> [# comment]
# C <freq> <sr> <fec> <mod> [# comment]
- new: # T[2] [plp_id] [system_id] <freq> <bw> <fec_hi> <fec_lo> <mod> <tm> <guard> <hi> [# comment]
# C[2] [plp_id] [data_slice_id] [system_id] <freq> <sr> <fec> <mod> [# comment]
(NOTE: it's time to adopt 'scan' to API V5 && at least DVB-T2!)
- update documentation in ./doc to reflect file change of initial_tuning_data
2011-10-11
- add S152E0, S156E0, S166E0, update S160E0, thanks to ozvdr (Hans)
- no longer skip over the following audio formats in case of VDR output (now supported by vdr)
- 13818-7 audio w. ADTS transp syntax
- 14496-3 audio w. LATM transp syntax
- change xine output:
old: output standard audio only.
new: output AC3 audio. If not found, fall back to standard audio
- change mplayer output:
old: output '+' separated list of standard audio pids.
new: output '+' separated list of ac3 audio pids, followed by standard audio pids.
- change vlc xspf output:
- apply stray newlines patch for vlc dvb-s format,
as reported by Juergen Lock (cosmetics)
- convert to UTF-8 using glibc
- remove unneeded duplicated char recoding
2011-07-02
- add requested format 'Gstreamer Plugin dvbsrc'
- fix counting services
- cosmetics
2011-06-16
- updates to several satellites, thanks to Dotan Porat for
reporting and providing initial patches
- Nilesat 101/102 + Atlantik Bird 4A
- one transponder on Astra 19E2
- Amos 1/2/3
2011-05-02
- fix wrong ATSC 8VSB and 16VSB identifiers for xine output, thanks to M.Krufky
- now assume country = US, if frontend type = ATSC. This should work, since
most non-US countries using ATSC still use the same channel lists as US.
- now assume vdr format vdr-1.7, if VSB/QAM-B scan with vdr settings.
ATSC users of VDR anyway need to patch their sources or upgrade to
latest developer releases.
- check if choosen frontend type fits to choosen scan type
- extend -a option to allow string /dev/dvb/adapterN/frontendM
you may now use -a (0..7) or -a /dev/dvb/adapter(0..7)/frontend(0..7)
2011-04-10
- fix qam setting BR
- add option -C <charset>, output coding (default: guess users codepage).
if given, w_scan uses iconv to translate to this charset,
i.e. 'w_scan -fc -cDE -C utf-8'
if not given, w_scan tries to *guess* your charset and translates to that.
- now guess users country if -c <country> not given.
- add compiler flags: Wall, Wextra, Wno-comment, Wswitch-default, Wno-unused-parameter
- remove all remaining <TAB> whitespaces.
2011-03-29
- add Brasil ISDB-T/DVB-C, thanks to Mauro Carvalho Chehab
- changed command line option '-S':
- ordering of srates
- add 6086
- add 5217
- remove 7000, because unreasonable
- update man page accordingly
- update S23E5 TP16
2011-03-13
- update S41E9 and rename to S42E0
2011-03-06
- NOTE@maintainers: it's called 'w_scan', not 'w-scan' or 'wscan'.<br>
Please fix if mistyped in your repo.
- fix memory leak in parse-dvbscan.c:142 (dvbscan_parse_tuningdata; char * buf)
- fix memory leak in parse-dvbscan.c:489 (dvbscan_parse_rotor_positions; char * buf)
- fix double deallocating pointer in scan.c:2999 (main; int frontend_fd)
- fix memory leak in scan.c:2654 (main; char * country)
- fix memory leak in scan.c:2722 (main; char * satellite)
- fix memory leak in scan.c:3192 (main; char * initdata)
- remove unused videodev.h from countries.c. Thanks to Felix Kaechele.
- fix octals in countries.c (backport from vdr-plugin wirbelscan-0.0.7)
- check/report hardware frequency and symbolrate limits to avoid error
messages in syslog
- fix option -L (VLC output) in case of DVB-S. Thanks to Juergen Lock.
2011-02-06
- bugfix: fix wrong comparison in check_frontend(), which lets the caller assume
that to not yet have pll lock and wait until timeout is over. This may speed up
each tuning to a new transponder a little. Thanks to Dick Streefland.
- set PILOT_AUTO on satellite transponders found by NIT. There's no flag inside NIT
to find explicitly 'ON' or 'OFF', so AUTO is the very best approach here.
Thanks to Dick Streefland.
- change <TAB> to <SPACE> in satellites.{c,h} and countries.{c.h} for better compat
with wirbelscan-0.0.6.
- add channel identifier USERLIST to channellist_t for compat with wirbelscan-0.0.6
2010-12-04
- add experimental output format libvlc xspl playlist. Thanks to Zouhair Souissi for libVLC m3u patch,
which was partially used for implementation.
- update manpage
- multiple AC3 pids
- bug fix: missing string termination in parse_psip_vct (ATSC only)
- cosmetics
2010-10-01
- add: DVB-C symbol rates 6956, 6956.5 for New Zealand
- mplayer output format as suggested by Pedro A. Aranda
- cosmetics
2010-05-29
- bugfix: if compiled with DVB-API-5.x, but using DVB-API-3.2 @ DVB-S,
IF was not assigned before tuning. Thanks to Juergen Lock.
- added some descriptor id's
- update Astra 1E/1G/3A
- changed help examples (wrong country id). Thanks to Tobias Grimm.
2010-03-16
- update Hispasat 1C/1D S30W0
- zero pids fix
- add Telstar 5 S97W0
- add ATSC channel syntax VDR-1.7.14
- add DVB-C symbol rates 5156, 5483
2009-12-30
- DVB-T UK: default to 8k transmission mode
2009-11-18
- allow any 5.xx DVB API
- removed some compiling warnings w. glibc-2.10.1/gcc-4.4.2
- update transponders S28E2
2009-08-08
- bugfix: increased buffer size for print_channel (scan.c:882; scan.c:1877) to avoid stack smashing,
see https://bugzilla.redhat.com/show_bug.cgi?id=513871 (reported by "Stephen" and Felix Kaechele)
- changed struct tvct_channel to avoid gcc-4.4 warnings
- is_nearly_same_frequency changed to allow 2MHz on sat; 500kHz otherwise
- bugfix: is_different_transponder_deep_scan:304 auto = "ROLLOFF_AUTO"
2009-05-23
- added S160E (requested by realkano)
- using configure scripts now. If anybody can help improving configure script - you're welcome..
- added README instruction how to use on UTF8 system
- skip some channels on dvb-c
- added missing 'break' in scan.c.598
2009-05-16
- small corrections to README
- fixed permission to folder doc
- fixed cr/lf on some files
- fixed missing space characters in channel names
- fixed small bug which causes endless loop in rare cases (DVB-T only)
- added man page for w_scan
2009-01-01/2009-04-25
- SYNTAX CHANGE:
w_scan now needs (!) command switch -c for defining your country. use uppercase two letters
for specifying your country, as defined by ISO 3166-1 use -c? for list:
DE = Germany
US = United States
GB = United Kingdom
FR = France
...
- restructured code
- changed DVB-C frequency list
- added freq list for Australia
- improved freq lists for FR, GB, FI
- added Option -e, extended scan flags, which allows to extend the scan to
* additional scan QAM_128 (default: QAM_AUTO with fallback to QAM_64 + QAM_256)
or
* scan these additional symbolrates (default: 6900 and 6875 only)
6111, 6250, 6790, 6811, 5900, 5000, 3450, 6950, 7000, 6952
NOTE: expert settings, will slow down by a factor of up to 10.
- reintroduced possibility to set manually
- DVB-C modulation (new option -Q)
- DVB-C coderate (new option -S)
- DVB-C inversion (option -i)
NOTE: these are experts settings only!
- applied some code cleanups from Michael Krufky
- applied 6MHz DVB-T scan patch for Taiwan (thanks to Michael Krufky)
- added onid to kaffeine channels (suggested by Zend HetMij)
- added support for parsing of dvbscan initial tuning data
(new option -I)
- started re-implementation of DVB-S (not yet finished)
-> new options:
-s (satellite setting, use -s? for list)
-r (rotor position)
-l (LNB setting)
-D (DiSEqC switch)
- w_scan now shares the list of satellites with wirbelscan plugin (0.0.5 pre1 or higher)
- removed folder patches (obsolet)
2008-11-06
- improved frontend detection (thanks to Hans Werner)
- added a patch for single frequency scanning, see folder patches.
This patch is not applied by default, if you need this feature,
please apply patch and recompile. (thanks to Martin Dudok van Heel)
2008-08-15
- added ATSC scanning support for terrestrial VSB & QAM Annex-B digital cable.
(thanks to Michael Krufky)
- removed vpid offset for H.264 channels
2008-07-20
- added Copyright note, following the license of 'scan' from linuxtv-dvb-apps.
- changed install location of {pci,usb}.{ids,classes} to /usr/share/w_scan
2007-12-09/2008-01-05
- added H.264/AVC Video support
- added ATSC A/53B Audio, ADTS Audio Stream, ISO/IEC 14496-3 Audio (not supp. up to now by vdr)
(thanks to Steven Ellis)
-additionally:
-- support for ca-ids, no longer just setting ca-id=1 for encrypted channels
-- support for language identifiers in vdr channels.conf
-- no longer searching for 'other services' by default.
-- added a lot of comments for information in moreverbose mode
-- Makefile target dist added
2007-09-09
- added kaffeine channels.dvb format, switch -k
2007-08-07
- w_scan will no longer stop if frontend params cannot be set correctly.
This is necessary, because newest mercurial dvb drivers seem to have sometimes
difficulties with scanning complete frequency range. Additionally some cards added
to pci.ids.
2006-09-03
- added output format (dvb)scan initial-tuning-data
2006-09-01
- applied w_scan-onid patch by Hartmut Birr which fixes that w_scan now
records original_network ID instead of network ID
- updated version of w_scan start script (which actually needs to be tested !)
2006-08-10
- w_scan start script (first version)
2006-07-05:
- removed QAM256 option "-Q", w_scan now uses either QAM_AUTO or (if not supported by hardware)
it will do a two-step scan starting with QAM64 and QAM256
2006-02-16:
- changed initialization for all cards, fix for airstar2 dvb-t and avermedia 771 dvb-t
- xine output option -X
- added dvb-c frequencies 113MHz, 121MHz and 858MHz, dvb-c freqs revised
- dvb-c now scanning sr=6900 *and* sr=6875 both by default, therefore removed option -s
- this version is tested with
- fujitsu-siemens dvb-c ff
- cinergy t2 usb2.0 dvb-t
- airstar2 dvb-t
- avertv avermedia 771 dvb-t
(please report other working/non-working cards to me..)
2005-07-11: first version
distrib
>
Mageia
>
7
>
armv7hl
>
media
>
core-updates
>
by-pkgid
>
79f6ae458d9b2af06b1c0ab6daf32d01
>
files
>
7
