Release 20180817: ⢠Windows: â¡ Support additional audio/video formats in Windows 7/8 app. â¡ Add option to check for beta releases. â¡ Update firmware to 20180817. ⢠Mac: â¡ Fix issue where some h.264 channels could show corruption near the bottom of the screen. â¡ Fix problem where some channels would flicker between video and a black screen. â¡ Fix problem playing audio-only channels. â¡ Ensure system default audio device is used for audio. â¡ Add pause/FF/RW support to live TV. â¡ Update firmware to 20180817. ⢠RECORD: â¡ Fix problem where live TV could report end-of-stream when crossing to a new time-slot. â¡ Support starting without an internet connection. â¡ Mac: Sign record engine to ensure correct operation with security software expecting signed software. Release 20180327: ⢠Windows: â¡ Update firmware to 20180327. ⢠Mac: â¡ Update firmware to 20180327. Release 20171221: ⢠Windows: â¡ Install the latest Windows 10 app if sideloading in Windows is enabled. â¡ Install INF file for DUO/QUATRO models. â¡ NAS Install: detect WDC MyCloud drives with app support and auto-install the HDHomeRun DVR app. ⢠Mac: â¡ New HDHomeRun app for Mac (requires OS X 10.11 or newer). ⢠Record engine: â¡ Fix problem recording two sporting events of the same series at the same time. â¡ Fix crash triggered by some clients in live TV mode. â¡ Look for conf file in RecordPath if specified on the command line. Release 20170930: ⢠Windows: â¡ NAS Installer: fix problem configuring the record service to auto-start on a MyCloud single drive NAS. â¡ Record service: Faster start when system is rebooted. â¡ Record service: Improve handling of USB attached hard drives. â¡ Record service: Detect mounted network shares. â¡ Update firmware to 20170930. ⢠Mac: â¡ Record service: Support USB attached hard drives. â¡ Update firmware to 20170930. ⢠libhdhomerun: â¡ Add tw-bcast channel lineup to match hardware. Release 20170815: ⢠Windows: â¡ Improve HDHomeRun Setup handling of the record path configuration. â¡ Update NAS Installer to support latest Synology firmware. â¡ Fix problem where installation may fail on some systems with the latest Microsoft Visual C++ Redistributable already installed. â¡ Update firmware to 20170815. ⢠Mac: â¡ Prevent screensaver from interrupting video playback. â¡ Add support for subtitles (USA). â¡ Add support for secondary audio channels. â¡ Improvements to video playback. â¡ Improve default audio track selection. â¡ Update firmware to 20170815. Release 20161119: ⢠Windows: â¡ Update HDTC-2US firmware to 20161119. ⢠Mac: â¡ Update HDTC-2US firmware to 20161119. Release 20161117: ⢠Windows: â¡ Ensure required Redistributable 2015 Update 3 is installed.. â¡ Set DVR record engine service to Automatic (Delayed Start) to work with USB drives. â¡ Update device firmware to 20161117. ⢠Mac: â¡ Improvements to live TV rate adaption. â¡ Update device firmware to 20161117 Release 20161107/20161107b: ⢠Windows: â¡ Windows Universal app for Windows 10, Windows 10 Phone, and XBox One. â¡ Automatically install the Windows Universal app for Windows 10 if sideloading is enabled. â¡ Beta release of HDHomeRun DVR for Windows. â¡ Fix problem where installation could fail and roll back on Windows 10. â¡ Fix detection of VC2015 redist on systems with a newer version installed. â¡ Update device firmware to 20161107/20161107b. ⢠Mac: â¡ Major update to HDHomeRun app for OSX. â¡ Beta release of HDHomeRun DVR for OSX. â¡ Update device firmware to 20161107/20161107b. ⢠libhdhomerun: â¡ Upgrade hdhomerun_sock API. â¡ New cond API for thread signaling. â¡ Windows: New defines for dllexport/dllimport. â¡ Windows: Improvements to socket performance. â¡ OSX: Fix sigpipe problem. â¡ OSX: Improvements to timer handling. Release 20150826: ⢠Windows: â¡ Update device firmware to 20150826. ⢠Mac: â¡ Update device firmware to 20150826. ⢠libhdhomerun: â¡ Expand discovery API to return DeviceAuth and BaseURL. Release 20150615: ⢠Windows: â¡ Update device firmware to 20150615. ⢠Mac: â¡ Update device firmware to 20150615. Release 20150604: ⢠Windows: â¡ HDHomeRun VIEW: Reduce CPU load deinterlacing video. â¡ HDHomeRun Setup: Fix possible crash in HDHomeRun Setup. â¡ Update device firmware to 20150604. ⢠Mac: â¡ HDHomeRun VIEW: Reduce CPU load deinterlacing video. â¡ Update device firmware to 20150604. ⢠libhdhomerun: â¡ Add API to return the model number of a HDHomeRun. â¡ Report original network ID in scan results. Release 20150406: ⢠Windows: â¡ HDHomeRun VIEW: Avoid problems caused by third-party browser plugins. â¡ HDHomeRun VIEW: Fix black/red/blue video problem seen on some systems. â¡ HDHomeRun VIEW: Fix SSL crash problem seen on some systems. â¡ HDHomeRun VIEW: Improve deinterlace quality when VLC is installed. â¡ HDHomeRun VIEW: Improve OpenGL compatibility. â¡ HDHomeRun Setup: Remove requirement to enter postcode. â¡ HDHomeRun Setup: Remove old XBMC support. â¡ HDHomeRun Setup: Remove old support for remapping US ClearQAM channels on Vista Media Center. â¡ HDHomeRun Setup: Auto-detect preview application. â¡ HDHomeRun Setup: Improvements to UI. â¡ HDHomeRun Config GUI: Fix crash. â¡ HDHomeRun Config GUI: Support configuring the IP address and boot script of TECH models. ⢠Mac: â¡ HDHomeRun VIEW: Support VLC 2.2.0 if installed. â¡ HDHomeRun VIEW: Improve deinterlace quality when VLC is installed. â¡ HDHomeRun Config GUI: Support configuring the IP address and boot script of TECH models. ⢠libhdhomerun: â¡ Remove unused lineup-location get/set functions. â¡ Fix missing header needed for OS-X. Release 20141210: ⢠Windows: â¡ HDHomeRun VIEW: Video rendering performance improvements. â¡ HDHomeRun VIEW: Support reduced resolution rendering for low end tablets. â¡ HDHomeRun VIEW: Support guide data for HDHR-US and HDHR3-US models. â¡ HDHomeRun VIEW: Support scrolling the channel list using touch and/or mouse. â¡ HDHomeRun Setup: Automatically configure HDHomeRun VIEW guide data for HDHR-US/HDHR3-US models. â¡ HDHomeRun Setup: Improvements to user interface. â¡ HDHomeRun Config GUI: Fix default-selection of currently playing program. â¡ HDHomeRun BDA/WMP: Fix problem where BDA/WMP could interrupt http stream. ⢠libhdhomerun: â¡ Fix problem where libhdhomerun could interrupt http stream. Release 20141201: ⢠Windows: â¡ HDHomeRun VIEW: Fix crash on systems without OpenGL support. â¡ HDHomeRun VIEW: Support wider range of graphics cards. â¡ HDHomeRun VIEW: Improvements to picture quality. â¡ HDHomeRun Setup: Fix problem generating SageTV and XBMC configuration files. Release 20141124: ⢠Windows: â¡ HDHomeRun VIEW: New application for viewing live TV. Replaces QuickTV. â¡ HDHomeRun Setup: Simplify tuner signal-source selection. â¡ HDHomeRun Config GUI: Default-select currently playing program. â¡ HDHomeRun WMP Plugin: Support auto-selecting a tuner when not specified. â¡ HDHomeRun WMP Plugin: Fix problem reporting MPEG2 video size. â¡ Update device firmware to 20141124. ⢠Mac: â¡ HDHomeRun VIEW: New application for viewing live TV. â¡ Improvements to firmware upgrade process. â¡ Update device firmware to 20141124. ⢠Linux: â¡ HDHomeRun Cofig GTK: Fix crash on launch when used with glib + paranoia checks. â¡ HDHomeRun Cofig GTK: Fix automake problem. ⢠libhdhomerun: â¡ New API for adding all tuners of a device to a device-selector object. â¡ Improvements to implementation of random_get32 and getcurrenttime APIs. â¡ Fix DNS handling on Android. Release 20140604: ⢠Windows: â¡ HDHomeRun BDA driver: DVB-C fixup feature for use with Windows Media Center and YouSee Cable. â¡ HDHomeRun Config GUI: Ensure non-transcode operation on HDTC models when âÂÂnativeâ is selected. â¡ Update device firmware to 20140604. ⢠Mac: â¡ Support OS-X 10.9. â¡ Drop PPC support. â¡ Support compiling under jhbuild. â¡ Update device firmware to 20140604. ⢠libhdhomerun: â¡ Allow more time for firmware upgrade before reporting timeout. â¡ Add Mac 64-bit support, drop PPC support. â¡ Add Japanese channel map. Release 20140121: ⢠Windows: â¡ HDHomeRun Setup: Faster channel scan on HDHR3-CC and HDHR3-4DC models. â¡ HDHomeRun Setup: Fixes and improvements for HDHR3-4DC 4-tuner DVB-C model. â¡ HDHomeRun Setup: Fix rare problem where it may not be possible to set the source type. â¡ HDHomeRun Service: Improvements to handling of resume and IP change. â¡ HDHomeRun QuickTV: Fix problem where channel list was not available after a channel could not be played. â¡ HDHomeRun Config GUI: Fix problem with program selection when device already has a selected program. â¡ HDHomeRun Config GUI: Improvements to webpage rendering. â¡ HDHomeRun Config GUI: Add support for transcode models. â¡ Update device firmware to 20140121. ⢠Mac: â¡ Update device firmware to 20140121. ⢠libhdhomerun: â¡ License changed to LGPL 2.1. â¡ Improvements to socket handling on Mac/Linux. â¡ Corrections to EU channel map. â¡ Increase firmware upload chunk size. Release 20130328: ⢠Windows: â¡ HDHomeRun Installer: Fix problem causing installer to fail on Windows Server 2012. â¡ HDHomeRun Setup: Fix crash when remap mode was selected for HDHR3-CC model hardware. â¡ HDHomeRun Setup: Fix use of HDHR3-CC model in BDA Digital Cable mode with Vista Media Center. â¡ HDHomeRun Setup: Limit signal source selection to signal source types supported by the hardware. â¡ HDHomeRun Setup: Deprecate GB-PVR support. â¡ HDHomeRun Config GUI: Fix program list selection issue. â¡ HDHomeRun QuickTV: Display the channel name and number in the title and on the taskbar. â¡ Update device firmware to 20130328. ⢠Mac: â¡ Update device firmware to 20130328. ⢠Linux: â¡ HDHomeRun Config GUI: Fix installation to non-default directory. Release 20130117: ⢠Windows: â¡ HDHomeRun Setup: Detect subscribed channels when CableCARD is present. â¡ HDHomeRun Setup: Channelmap selection based on detected hardware â fixes incorrect error message in some countries. â¡ HDHomeRun Service: Invoke ehprivjob automatically as needed for CableCARD operation. â¡ HDHomeRun QuickTV: Auto play last channel on launch. â¡ HDHomeRun Config GUI: Add device webpage access. â¡ HDHomeRun Config GUI: Report network target for tuner. â¡ HDHomeRun Config GUI: Support browsing devices while playing video. â¡ Update device firmware to 20130117. ⢠Mac: â¡ Update device firmware to 20130117. ⢠libhdhomerun: â¡ Cleanup and protect sprintf and sscanf functions. â¡ Ignore local interfaces that are not running when detecting local IP addresses. â¡ Channelmap selection based on detected hardware. â¡ Use time for random numbers if random number resource is not available. â¡ Fix memory leak in channelscan handling. Release 20120405: ⢠Windows: â¡ Use same instance of VLC when used as the preview application. â¡ Improvements to diagnostic logging. â¡ Update device firmware to 20120405. ⢠libhdhomerun: â¡ Add channel map for cable TV in Korea. â¡ Improvements to TCP socket handling. Release 20120128: ⢠Windows: â¡ HDHomeRun Setup: Add support for Easy HDTV DVR and NextPVR. â¡ HDHomeRun Setup: Support unnamed channels from CableCARD. â¡ HDHomeRun Setup: Generate SageTV SCN files when HDHomeRun Prime is used without a CableCARD. â¡ HDHomeRun Setup: Configure VLC to auto deinterlace rather than always deinterlace when VLC is selected as the viewing application. â¡ HDHomeRun Config GUI: Configure VLC to auto deinterlace rather than always deinterlace when VLC is selected as the viewing application. â¡ HDHomeRun Service: Fix crash/deadlock causing errors. â¡ HDHomeRun Installer: hdhomerun.inf update to match new PnP-X tags. â¡ HDHomeRun Installer: Fix issue where registry entry was not updated when changing install location on x64 systems. â¡ Update device firmware to 20120128. ⢠Mac: â¡ HDHomeRun Config GUI: Configure VLC to auto deinterlace rather than always deinterlace. â¡ Update device firmware to 20120128. Release 20111025: ⢠Windows: â¡ HDHomeRun Setup: Test for UPnP multicast network problems automatically when detecting HDHomeRun devices. â¡ HDHomeRun Setup: Allow duplicate CableCARD channel names. â¡ HDHomeRun Setup: Auto-fix WMC channel limit on cable systems using 4-digit channel numbers. â¡ HDHomeRun BDA driver: Fix minor resource leak. â¡ HDHomeRun WMP plugin: Improve subscription and protection error messages. â¡ HDHomeRun Installer: Add firewall rules for the domain firewall profile. â¡ Update device firmware to 20111025. ⢠Mac: â¡ Update device firmware to 20111025. ⢠libhdhomerun: â¡ Move multicast join/leave handling to sock API. Release 20110925a: ⢠Windows: â¡ HDHomeRun Setup: Support CC models operating in ClearQAM mode. â¡ HDHomeRun Setup: DVB-C channel scan improvements. â¡ HDHomeRun Setup: GUI improvements. â¡ HDHomeRun QuickTV: Support CC models under XP/Vista. â¡ HDHomeRun QuickTV: Improvements to standalone installer. â¡ HDHomeRun WMP Plugin: Support multiple multicast sessions to the same stream on the same host. â¡ HDHomeRun Config (GUI): Report OOB information for CC models. â¡ Update device firmware to 20110925a. ⢠Mac: â¡ Update device firmware to 20110925a. ⢠libhdhomerun: â¡ Add functions for reading OOB status. â¡ Support multiple multicast sessions to the same stream on the same host. Release 20110830: ⢠Windows: â¡ HDHomeRun Setup: Avoid unregistering Prime tuners when saving configuration â fixes problem where WMC may stop playing / recording TV during the configuration saved process. â¡ HDHomeRun Setup: Ignore Hauppauge MOCUR tuners to avoid software/ configuration conflicts. â¡ CC models: Update firmware 20110830. ⢠Mac: â¡ CC models: Update firmware 20110830. Release 20110810: ⢠Windows: â¡ HDHomeRun Setup: GUI improvements relating to CableCARD support. â¡ HDHomeRun Setup: Faster firmware upgrade when multiple devices are detected. â¡ HDHomeRun Setup: Fix possible crash generating channel files when HDHomeRun is not accessible. â¡ HDHomeRun QuickTV/WMP: Present message when channel cannot be displayed due to CableCARD channel restrictions. â¡ Installer: Fix double-backslash bug in firewall rules causing video to be blocked on some systems. ⢠libhdhomerun: â¡ Add vstatus API for use with CableCARD. Release 20110801: ⢠Windows: â¡ Fix install bug from 20110729 release where installation could fail on 32-bit systems. ⢠Mac: â¡ Fix bug from 20110729 release preventing HDHomeRun units from being discovered. ⢠libhdhomerun: â¡ Fix bug from 20110729 release preventing HDHomeRun units from being discovered under Mac OS X. Release 20110729: ⢠Windows: â¡ HDHomeRun Prime support. â¡ HDHomeRun Setup: Enable DVB-C NIT/SDT injection by default for WMC with Digital Cable. â¡ HDHomeRun Setup: GUI improvements. â¡ HDHomeRun Config GUI: Improvements to TECH constellation plot display. â¡ HDHomeRun Config GUI: Fix possible segfault. â¡ HDHomeRun QuickTV: Add support for tuning by virtual channel for use with HDHomeRun Prime. â¡ BDA driver: Add support for DVB-C NIT/SDT injection based on HDHomeRun Setup channel scan. â¡ WMP plugin: Add support for tuning by virtual channel for use with HDHomeRun Prime. â¡ Installer: Fix problem where the firewall rules did not apply when the active network profile changed. â¡ Update to firmware 20110729. ⢠Mac: â¡ Update to firmware 20110729. ⢠libhdhomerun: â¡ Support IP-Tuner format device strings (required for mythtv). â¡ Improvements to local IP address detection. â¡ Add vchannel tune APIs for use with HDHomeRun Prime hardware. â¡ Fix DNS handling under cygwin required for remote debug logging. â¡ Fix null-pointer dereference in out of memory condition. Release 20110323: ⢠Windows: â¡ Support 1GHz cable TV (HDHR3 US/EU models). â¡ Run extensive channel scan for DVB-C cable (EU models). â¡ Improvements to HDHomeRun Config (GUI). â¡ Upgrade .NET framework. â¡ Update to firmware 20110323. ⢠Mac: â¡ Improvements to HDHomeRun Config (GTK). â¡ Update to firmware 20110323. ⢠Linux: â¡ Improvements to HDHomeRun Config (GTK). ⢠libhdhomerun: â¡ Upgrade channel maps (updated DVB-T tables, support for 1GHz cable, support for AU cable). â¡ Scan 1MHz steps for EU and AU cable TV. â¡ Report tuner count in discovery result. â¡ Fix compile/link errors under Solaris. Release 20100828: ⢠Windows: HDHomeRun Setup / drivers: â¡ Automatically generate channel Playlist for Windows Media Player. â¡ Add support for remapping DVB-C channels to DVB-T for use with Windows Media Center. â¡ Add support for user-specified symbol rates for DVBC. â¡ Add support for application For The Record. â¡ Generate XBMC files if XBMC is selected as the application, even if XBMC is not detected. â¡ Make âÂÂRemove channels not found in scanâ option persistent. â¡ Fix SageTV SCN file generation for clean v7 installs. â¡ Fix problem where tuner driver was not de-registered when tuner disabled and removed. â¡ Update postcode validation rules. â¡ Updated beta release of the WMC Sync utility. â¡ Update to firmware 20100828. ⢠Windows: HDHomeRun QuickTV / Windows Media Player: â¡ Add support for MPEG1 video in QuickTV/Windows Media Player. â¡ Disable codec-missing messages incorrectly triggered when rapidly changing channels. ⢠Windows: HDHomeRun Config GUI: â¡ Add support for TECH SNR numbers with higher precision than 1dB. â¡ Improvements to channel selection. â¡ Detect channelmap list from device. â¡ Fix problem where HDHomeRun Config GUI could cause a tuner to lose program selection if the channel was tuned by a different application while HDHomeRun Config GUI was running. â¡ Fix application crash if HDHR was unplugged while user has program list showing for selection. ⢠Mac: â¡ Update to firmware 20100828. ⢠libhdhomerun: â¡ Fix missing fclose in the hdhomerun_config upgrade code. â¡ Fix random lockkey generation. â¡ Fix const warnings. Release 20100213: ⢠Windows: â¡ Add a7qam256-6100 a7qam128-6100 a7qam64-6100 modulation options for DVB-C. â¡ Update to firmware 20100213. ⢠Mac: â¡ Update to firmware 20100213. ⢠libhdhomerun: â¡ Fix socket issue under cygwin. Release 20100121: ⢠Windows: â¡ Fix situation where Windows Media Center could deadlock resulting in one the following messages: âÂÂA serious error has occurredâÂÂ, âÂÂPlease wait. Searching for tunersâÂÂ, âÂÂAll tuners are in useâÂÂ. â¡ Fix generation of XBMC channel files when one or more channel names are invalid. â¡ Fix channel sorting in QuickTV. â¡ Add support for separate groups of tuners with the same source class. â¡ Add GUI option to disable Windows 7 Windows Media Center background channel scan. â¡ Automatically locate BdaSup.sys when reinstalling BDA components. â¡ HDHR-US: Add advanced option for configuring VCT filtering/injection with US-QAM. â¡ HDHR-EU: Add support for configuring DVB-C auto-modulation detection. â¡ HDHR-EU: Detect E-AC3 audio. â¡ Update to firmware 20100121. ⢠Mac: â¡ Update to firmware 20100121. ⢠libhdhomerun: â¡ Upgrade socket handling. â¡ Upgrade msleep handling. â¡ hdhomerun_config: prevent sleep on Windows machines during save operation. Release 20091024: ⢠Windows: Application support: â¡ Add support for J River Media Center. â¡ Support DVB-C in MediaPortal. ⢠Windows: HDHomeRun Setup: â¡ Enable TotalMedia download for HDHR-EU customers. â¡ Check for updates when run. â¡ Update to firmware 20091024. ⢠Windows: HDHomeRun QuickTV: â¡ Add option to allow multiple QuickTV windows to be opened. â¡ Add option to run QuickTV as a stay-on-top window. â¡ Add support for channel-list files for listing channels. â¡ Add multicast video support (commercial use). â¡ Detect and report missing codecs. â¡ Fix window size problem on netbooks. ⢠Windows: HDHomeRun BDA driver: â¡ Support Win7 WMC operation without registry information. â¡ Use channelmap based channel bandwidth for DVB-T/DVB-C if application fails to set the channel bandwidth. ⢠Windows: HDHomeRun WMP plugin: â¡ Add multicast video support (commercial use). ⢠Windows: HDHomeRun Installer: â¡ Associate âÂÂ.qtvâ channel-list files with HDHomeRun QuickTV. ⢠Mac: Installer: â¡ Update to firmware 20091024. ⢠HDHomeRun Config (GTK): â¡ Add Ctrl-D hotkey to enable sending diagnostic information to support. â¡ Stop stream on VLC exit. ⢠libhdhomerun: â¡ Expand hdhomerun_discover API to allow socket reuse. â¡ Add multicast video support. â¡ Fix socket leak on non-Windows platforms. â¡ Fix possible timing inaccuracy if the system time changes. â¡ Remove use of select() causing problems with greater than 1024 sockets. â¡ Improvements to debug logging. Release 20090830: ⢠Windows: HDHomeRun Setup: â¡ Update to firmware 20090830. ⢠Windows: HDHomeRun QuickTV: â¡ Add XP64 compatibility. ⢠Mac: Installer: â¡ Update to firmware 20090830. Release 20090806: ⢠Windows: Application support: â¡ GBPVR: Automatically add HDHomeRun tuners to the GBPVR bda.ini file. â¡ GBPVR: Automatically add digital cable channels that contain unencrypted programs to GBPVR qam.ini file. â¡ MediaPortal: Filter digital cable channels to only report channels that contain unencrypted programs. â¡ SageTV: Improvements to the handling of SageTV when user has disabled UAC. â¡ XBMC: Update generated files to support second tuner. ⢠Windows: HDHomeRun Setup: â¡ Faster channel scan for US-cable. â¡ Improvements to lineup server interaction to improve channel results. â¡ Improvements to guide name/number conflict handling. â¡ Workaround a Windows bug causing some DVB-T channels not to work in MCE 2005 and WMC TV-Pack. â¡ Fix problem where multiple VLC notification icons were left by the clock. â¡ Reuse same instance of the preview application when possible. â¡ Fix in-use errors reported on some systems. â¡ Add option for Canada WMC TV Pack if WMC TV Pack is detected. â¡ Update to firmware 20090806. â¡ GUI improvements. ⢠Windows: HDHomeRun QuickTV: â¡ New HDHomeRun QuickTV application for viewing live TV. ⢠Windows: HDHomeRun Config (GUI) â¡ Avoid changing the selected tuner on rescan. â¡ Reuse same instance of the preview application when possible. â¡ Fix problem where multiple VLC notification icons were left by the clock. â¡ Fix in-use errors reported on some systems. â¡ GUI improvements. ⢠Windows BDA Driver: â¡ Fix graph reference count leak. â¡ Fix bug where the signal strength may be misreported in remap mode for a non/existant channel. ⢠Windows Media Player Plugin: â¡ Support additional third party h.264 codecs. â¡ Display error message if a codec is missing that is needed to play the channel. â¡ Add dynamic tuner allocation support. ⢠Mac: Installer: â¡ Update to firmware 20090806. ⢠libhdhomerun: â¡ Faster channel scan for US-cable. â¡ Track TSID during channelscan for use with channel matching. â¡ Resource-lock tuner during hdhomerun_config channel scan. â¡ Skip discover of device ID when device ID is known. â¡ Fix min/max conflict compiling with MythTV. â¡ Fix possible early return from msleep. â¡ Start streaming API updated to fall back to UDP if firmware does not support RTP. â¡ Separate out debug disable from debug close APIs. â¡ Speed up discovery process. â¡ Add dynamic tuner allocation support to libhdhomerun. Release 20090415: ⢠Windows: HDHomeRun Setup: â¡ Fix case where conflicting channel names were not detected and prevented. â¡ Fix problem where the tuner configuration was not remembered if set to âÂÂDigital Cableâ combined with âÂÂOther: ATSC/QAMâ or âÂÂOther: DVBT/DVBCâÂÂ. â¡ Update to firmware 20090415. ⢠Windows: BDA driver: â¡ Fix problem where tuners may be unavailable if a DVR application terminates unexpectedly and fails to release a tuner. Release 20090411: ⢠Windows: Application support: â¡ SageTV: Improvements to generation of SageTV SCN files for Digital Cable. â¡ SageTV: Do not generate SCN files for Digital Antenna (ATSC/DVBT). â¡ SageTV: Fix problem where old SageTV SCN files were not deleted. â¡ LiquidTV: Restart LiquidTV service if BDA configuration changes. ⢠Windows: HDHomeRun Setup: â¡ Add support for single integer virtual channel numbers. â¡ Detect and prevent conflicting channel information. â¡ Update to firmware 20090411. â¡ GUI improvements. ⢠Windows: BDA driver: â¡ Improvements to debug logging. ⢠Mac: Installer: â¡ Detect location of VLC. â¡ Update to firmware 20090411. â¡ Fix problem where firmware updater may fail to upgrade if unit is running a firmware release from 2007. ⢠libhdhomerun: â¡ Add support for single integer virtual channel numbers. â¡ Add lockkey support to hdhomerun_config. â¡ Cleaner exit handling for hdhomerun_config save command. Release 20090305a: ⢠Windows: Application support: â¡ Add application setting to support future LiquidTV releases with HDHomeRun support. â¡ Add firewall exception for BeyondTV Recorder service if detected. ⢠Windows: HDHomeRun Setup: â¡ Fix possible situation where driver registry settings were not upgraded when installing newer HDHomeRun software. â¡ Update to firmware 20090305. ⢠Windows: BDA driver: â¡ Auto-detect network provider compatibility mode if needed (replaces registry configuration). â¡ Optimize auto-modulation detection based on modulation type requested. â¡ Improvements to debug logging. ⢠Windows: WMP plugin: â¡ Support DVBT AAC/LATM audio for use in New Zealand. ⢠Mac: Installer: â¡ Add backwards compatibility support for OS 10.4. â¡ Update to firmware 20090305. ⢠Linux/Mac: HDHomeRun Config (GUI) â¡ Support DVBT channel maps. ⢠libhdhomerun: â¡ Report overflow errors when using the hdhomerun_config save command. â¡ Fix loop delay handling in the hdhomerun_config save command that was causing overflow errors on some systems. Release 20090215: ⢠Windows: Installer: â¡ Deprecate HDHomeRun Manager application. â¡ Store HDHomeRun software version string in registry. ⢠Windows: Application support: â¡ Windows Media Player plugin for streaming direclty to WMP. â¡ Add workaround to support ATSC OTA in Canada with WMC TV Pack. â¡ Disable WMCTVP HRC workaround if Win7 WMC is detected. â¡ Fix detection of XBMC version on 64-bit Windows. â¡ Fix detection of MSNP.ax when Vista SP2 is installed. â¡ Depreciate support for SageTV 6.3.x and older. ⢠Windows: HDHomeRun Setup: â¡ Support channel preview using Windows Media Player. â¡ Add ability to override resource lock when previewing channels. â¡ Update to firmware 20090215. ⢠Windows: HDHomeRun Config (GUI): â¡ Support channel preview using Windows Media Player. â¡ Add ability to override resource lock when previewing channels. â¡ Add support for TECH hardware. ⢠Windows: BDA driver: â¡ Improve buffer handling and reduce memory footprint. â¡ Improvements to debug logging. ⢠libhdhomerun: â¡ Add support for executing startup script on TECH hardware. Release 20081231: ⢠Windows: Application support: â¡ Generate channel files for XBMC. ⢠Windows: HDHomeRun Setup: â¡ Do not force the specific deinterlace mode when launching VLC. â¡ Update to firmware 20081231. ⢠Windows: HDHomeRun Config (GUI): â¡ Do not force the specific deinterlace mode when launching VLC. ⢠Windows BDA driver: â¡ Filter out blank padding when application does not control filtering. â¡ Fix rare error reading lineup configuration file. ⢠Linux: HDHomeRun Config (GUI): â¡ Do not force the specific deinterlace mode when launching VLC. Release 20081222: ⢠Windows: HDHomeRun Setup: â¡ Improvements to location/postcode validation. â¡ Fix bug causing blank SageTV SCN files when used with a HRC-based cable system. â¡ Fix bug causing SageTV FRQ files to be incorrectly deleted in some situations. â¡ Allow window to be resized. â¡ Update to firmware 20081222. ⢠All platforms: libhdhomerun: â¡ Adjust SNQ color thresholds to better match hardware scale. â¡ Replace use of strcpy with strncpy. Release 20081213: ⢠Windows: Application support: â¡ Hide encrypted-only channels from TotalMedia â reduces numbering conflicts and scan time. ⢠Windows: hdhomerun_config: â¡ Fix problem where hdhomerun_config would cause batch file processing to fail. ⢠OSX: HDHomeRun Utilities: â¡ Automatically download and install required framework if not installed. â¡ Fix possible lockup in HDHomeRun Config (GUI) when VLC quits. ⢠Linux: HDHomeRun Config (GUI): â¡ Fix âÂÂmake installâÂÂ. Release 20081209: ⢠Windows: Application support: â¡ Detect Windows 7 Media Center. â¡ Enable PID filter by default for GB-PVR (requires GB-PVR 3.1.7). ⢠Windows: HDHomeRun Setup: â¡ GUI layout changes to improve flow. â¡ Expand list of user-selectable countries for location setting. â¡ Country + signal source configuration used to set channelmap in devices. â¡ Default to TotalMedia if no other apps are detected so download button is displayed. â¡ Add support for channel names using Unicode character sets. â¡ Fix bug causing channel names containing a space to be truncated. â¡ Detect if tuner is in use before running a channel scan or launching VLC. â¡ Scan full HRC/Cable channel map for use on cable systems with mixed HRC /Cable frequencies. â¡ Enable deinterlace support in VLC when launched via HDHomeRun Setup. â¡ Fix possible exception in a situation where installing the Windows BDA components failed. â¡ Update to firmware 20081209. â¡ Add DVB-T support. ⢠Windows: HDHomeRun Config (GUI): â¡ Add support for channel names using Unicode character sets. â¡ Detect if tuner is in use before running launching VLC. â¡ Enable deinterlace support in VLC when launched via HDHomeRun Config (GUI). â¡ Add DVB-T support. ⢠Windows: BDA driver: â¡ Add dynamic tuner allocation support to allow tuners to be automatically allocated between computers as needed. â¡ Update USCableAuto mode to support cable systems that use a mixture of cable and HRC frequencies. â¡ Optimize handling of PID filter updates within a transaction. â¡ Support changing channel outside of a transaction. â¡ Clear program filter on channel change to prevent stale configuration from being applied if the application does not update program filter. â¡ Fix error detection and handling for out of range frequency request (> 2GHz). â¡ Add DVB-T support. ⢠OSX: HDHomeRun Config (GUI) â¡ New cross-platform HDHomeRun Config GUI utility. ⢠Linux: HDHomeRun Config (GUI) â¡ New cross-platform HDHomeRun Config GUI utility. ⢠All platforms: hdhomerun_config: â¡ Configure shell in windows to display UTF-8 strings. â¡ Channel scan reads channelmap from device and scans channels from this channelmap (and any other associated channelmaps). ⢠All platforms: libhdhomerun: â¡ Add tuner resource lock support. â¡ Channel scan order reversed to scan highest frequency first. â¡ Add frequency tables for additional countries. â¡ Change channel_list API to use a channel_list object rather than the channelmap bitmask used previously. Channel list objects can be created for any channelmap or list of channelmaps by name. â¡ Deprecate API to get channelmaps by model. Application should read the current channelmap from the device or ask the user which channelmap to use. â¡ Increase max length of a channel name (needed for DVB-T). â¡ Change green (good) signal color to a lighter shade of green. â¡ Add extern-C statements to channel and channelscan headers. â¡ Fix bug causing channel names containing a space to be truncated. â¡ Fix communication problem triggered by selecting a HDHR unit by IP address when the host has multiple network interfaces. â¡ Fix memory warning where buffer was not zeroed before use. â¡ Add DVB-T support. Release 20081002: ⢠Windows: Application support: â¡ Publish 8VSB+QAM support for WMCTVP regardless of input type. â¡ Convert us-cable channel request into us-hrc channel request for WMCTVP and TotalMedia when used on a HRC based cable system â fixes problem where WMCTVP may not detect ClearQAM channels on an HRC based cable system. ⢠Windows: HDHomeRun Setup: â¡ Add support for VLC 0.9.2. â¡ Update to firmware 20081002 ⢠Windows: HDHomeRun Config (GUI): â¡ Fix bug causing HDHomeRun Config (GUI) to not terminate correctly in some situations with VLC running. ⢠Windows: BDA driver: â¡ Return IHDHomeRun_ProgramFilter as supported when enumerating supported interfaces. â¡ Fix possible start up deadlock in BDA driver. ⢠Windows: Installer: â¡ Fix bug in updater causing version file to be pulled multiple times. â¡ Check SW20-S050-15 power adapter replacement database and display webpage if appropriate. ⢠libhdhomerun: â¡ Improve discover support for UNIX platforms. â¡ Add support to hdhomerun_config for reading set value from stdin. â¡ Fix potential get/set buffer overflow. â¡ Fix null-termination error when PID filter is set to block-all. Release 20080727: ⢠Windows: Application support: â¡ VMC: Fix miss-detection of a Microsoft limited distribution release version of MSNP.ax that resulted in a no-signal error in VMC on some systems. â¡ SageTV: include channels that do not have guide numbers in the SCN channel import file. ⢠Windows: HDHomeRun Setup: â¡ Fix bug in channel editor where it may fail to allocate a remap number when a channel is enabled that was previously disabled. â¡ If a remap number is edited and changed to a number already in use then generate a new remap number for the other channel (rather than generating a new remap number for the channel that was just edited). ⢠libhdhomerun: â¡ Fix segfault in hdhomerun_config when a logged channel scan is run under 64-bit Linux. Release 20080723: ⢠Windows: Application support: â¡ Add support for Windows Media Center TV Pack (WMCTVP). â¡ Auto-detect Media Center version (MCE 2005, VMC, WMCTVP). â¡ Generate channel import information for MCE 2005 in ATSC mode (forces MCE 2005 to detect ATSC sub-channels). â¡ Add support for SageTV 6.4 native QAM (SageTV version auto-detected). â¡ Add support for BeyondTV 4.9 native QAM (BeyondTV version auto-detected). â¡ Add application option for GB-PVR. â¡ Add application option for MediaPortal. â¡ Add application option for generic ATSC/QAM applications. â¡ Add application option for generic DVBT applications. ⢠Windows: HDHomeRun Setup: â¡ Add support for DVB-T hardware. â¡ Add ability to log debug information when streaming to VLC. â¡ Add native QAM support to channel editor. â¡ Halve the cable channel scan time by detecting HRC vs Cable/IRC. â¡ Track virtual channel numbers in the channel editor in Antenna and native QAM modes. â¡ Clean up editing of remap numbers in the channel editor (double-click on remap entry to edit). â¡ Fix column sorting in the channel editor. â¡ Fix problem where atscprefs.xml file may not be generated when a channel name is blank. â¡ Generate atscprefs.xml file for MCE 2005 in ATSC mode so MCE detects all ATSC sub-channels. â¡ Generate SageTV scn files so SageTV can import channel information. â¡ Update to firmware 20080723. â¡ General UI improvements. ⢠Windows: HDHomeRun Manager: â¡ Fix glitch where HDHomeRun Manager flashes up a window when Windows starts. â¡ New HDHomeRun Manager notification icon and menu. ⢠Windows: HDHomeRun Config (GUI): â¡ Add support for DVB-T hardware. â¡ Show modulation type in HDHomeRun Config (GUI). â¡ Add ability to log debug information when streaming to VLC. ⢠Windows: BDA driver: â¡ Add support for DVB-T hardware. â¡ Add support for BDA AutoDemodulate API. â¡ Add API to allow filtering by program number. ⢠Windows: Installer: â¡ Fix problem where software updater may not be installed correctly when upgrading. ⢠libhdhomerun: â¡ New API for channel scan. â¡ Add model detection and model helper functions. â¡ Use RTP by default so network loss can be detected. â¡ Add define to enable exporting functions when building a Windows DLL. â¡ Report reception/network errors when using the hdhomerun_config save command. â¡ Increase the minimum signal threshold to approx -83dBuV. Release 20080430: ⢠Windows: Fix access violation error seen on some systems. ⢠Windows/Mac/Linux: Fix upgrade communication error seen on some systems. ⢠libhdhomerun: Fix uninitialized pointer causing access violation error in some situations. ⢠libhdhomerun: Extend maximum allowed wait time for upgrade upload complete message to allow for actual time required to upload. Release 20080427: ⢠Windows: Add support for downloading TotalMedia (including license key). ⢠Windows: Fix multi-threaded reconnect error (most commonly seen when PC resumes from sleep). ⢠Windows: Fix upgrade error handling. ⢠Windows: Fix error saving graph in GraphEdit. ⢠Windows: Update to firmware 20080427. ⢠libhdhomerun: Check upgrade upload result reported by HDHomeRun (fixes communication state problem if upload failed). ⢠libhdhomerun: Improvements to control retry/reconnect code. ⢠libhdhomerun: Add pkt object to simplify packet handling. ⢠libhdhomerun: Add UK/NZ frequencies to channel map API. ⢠libhdhomerun: Add API for detecting channel maps based on HDHomeRun model (ATSC vs DVBT). ⢠libhdhomerun: Detect MSVS Windows compile without additional user define. ⢠libhdhomerun: Add support for compiling under Solaris. Release 20080307: ⢠Windows: Fix possible no-signal issue in BDA driver. Release 20080305: ⢠Windows: Fix possible no-signal issues when using OTA and a channel scan has not been run. ⢠Windows: Fix DLL and install errors on Windows 2000. ⢠Windows: Fix problem causing MCE to report âÂÂtuner errorâ on some systems after resuming from sleep. ⢠Windows: Detect changes to IP configuration and enable/disable direct-connect as appropriate. ⢠Windows: Support frequency adjustment to HRC channel numbering for applications with native QAM support. ⢠Windows: Update to firmware 20080305. Release 20080212: ⢠Windows: Combined 32-bit/64-bit installer that auto-detects OS type. ⢠Windows: Suppress known non-digital or disabled channels to speed up channel scan in third-party DVR applications. ⢠Windows: Auto-detect DVR application on first install. ⢠Windows: Automatically close HDHomeRun utilities when installing new release. ⢠Windows: Automatically stop MCE and SageTV services as required when updating BDA drivers. ⢠Windows: Restart MCE scheduling service if lineup ID is changed. ⢠Windows: Eliminate multiple requests for Admin approval during Vista install. ⢠Windows: Eliminate need to reboot PC after upgrading in most situations. ⢠Windows: Fix possible firewall installation errors when installing on a PC running SageTV. ⢠Windows: Fix uninstall problem possible on some systems. ⢠Windows: Detect and re-register Windows components needed by MCE if they are de-registered by uninstalling SageTV. ⢠Windows: Fix cascade of errors reported when a HDHomeRun unit is unplugged while using HDHomeRun Config (GUI). ⢠Windows: Update to firmware 20080212. ⢠libhdhomerun: Change status color enumeration to ARGB format. Release 20080104: ⢠Windows: Support different sources for each tuner (when supported by DVR application). Not supported by MCE. ⢠Windows: Configure driver for feature-set supported by DVR application specified. ⢠Windows: Support PID filtering in MCE 2005 for reduced network bandwidth in ATSC mode. ⢠Windows: Improved UI handling for installing drivers. ⢠Windows: Support configuration without lineup server if desired. ⢠Windows: Faster channel scan by using Digital Antenna/Digital Cable selection to select channels to scan. ⢠Windows: Indicate invalid/conflicting custom guide numbers. ⢠Windows: Fix debug handling when using 32-bit application on 64-bit install. ⢠Windows: Fix vcredist issue on Vista. ⢠Windows: Fix rare miss-trigger of 4002 error on some systems. ⢠Windows: Update to firmware 20080104. ⢠libhdhomerun: Add APIs for obtaining number of channels that match a set of channel maps. ⢠libhdhomerun: Enhance channel scan APIs to use a given set of channel maps. Release 20071209: ⢠CD production release.