########################################################################## #### #### Extended Module Player configuration file #### xmp will look for this file in /etc/xmp.conf, $HOME/.xmprc or #### $HOME/.xmp/xmp.conf #### #### An <yesno> argument is assumed "yes" when the first character #### is either 'y' or 'o'. #### #### $Id: xmp.conf,v 1.3 2001/02/21 23:54:12 claudio Exp $ #### ########################################################################## # verbosity = <val> # Verbosity level. Default is 0. # verbosity = 1 ########################################################################## #### #### DRIVER PARAMETERS #### ########################################################################## # driver = <name> # Output device to be used (oss_seq, oss_mix, etc). # #driver = alsa_mix # OSS software mixing # Set the number and size in bytes of audio buffer fragments. The size must # be a power of two. # #frag = 16,2048 # OSS sequencer # Set the chorus mode and reverb mode for AWE cards. # awechorus = 2 awereverb = 5 # Solaris or HP-UX driver # Set the output audio gain (0 to 255) # #gain = 180 # Set the audio port. Valid values are s[peaker], h[eadphones] and l[ineout]. # #port = speaker # Set the audio buffer size # #buffer = 32768 # Network Audio System driver #server = tcp/mrhankey:8000 #duration = 2 #gain = 100 #watermark = 10 ########################################################################## #### #### SOFTWARE MIXER SETTINGS #### The following parameters affect the software mixer only #### ########################################################################## # srate = <val> # Sampling rate in hertz. Default is 22050 Hz. # srate = 44100 # bits = <val> # Output resolution for the software mixer. Default is 16 bits. # bits = 16 # interpolate = <yesno> # Turn sample interpolation on/off. Default is on. # interpolate = of course ########################################################################## #### #### EFFECTS #### ########################################################################## # chorus = <val> # reverb = <val> # Set the amount of chorus and reverb. These settings will NOT be used # in modules with embedded chrus and reverb settings (e.g. IMF) # chorus = 25 reverb = 50 # filter = <yesno> # Enable/disable lowpass filtering in IT files. Default is on. # # filter = nyet ########################################################################## #### #### PLAYER SETTINGS #### ########################################################################## # 8bit = <yesno> # Convert the 16 bit samples to 8 bit top save memory. This option is # ignored by AWE cards. # 8bit = no # crunch = <val> # xmp will try to crunch samples if they don't fit in the card memory # (if you use a GUS or AWE card). An extra crunch will often be needed # because samples can't span memory banks boundaries. By default this # value is set to 5%. # crunch = 5 # mono = <yesno> # Force mono output. Default is no. # mono = never! # reverse = <yesno> # Reverse left/right stereo channels. Default is off. # reverse = are you kidding? # mix = <val> # Percentual stereo mixing. Default is 75%. # mix = 80 # Turn module looping on/off. Default is off. # loop = no way! # pan = <yesno> # Enable/disable dynamic panning. AWE users may want to disable dynamic # panning if excessive clicking is heard in the output. Default is on. # pan = yeah, sure # time = <val> # Maximum playing time in seconds. Default is 0. # time = 0 # fx9bug = <yesno> # Emulate Protracker 2.x effect 9 (set offset) bug. Don't set it here, # use xmp.modconf instead. # # fx9bug = nope # fixloop = <yesno> # Half the sample loop start value. Don't set it here, use xmp.modconf # instead. # # fixloop = no thanks