# VDR Mandriva Linux configuration
# see documentation for more info

# Note that you can setup a system that runs multiple vdr daemons
# simultaneusly by issuing the following commands:
# ln -s vdr /etc/init.d/vdr2
# ln -s runvdr /usr/bin/runvdr2
# chkconfig --add vdr2
# cp /etc/sysconfig/vdr /etc/sysconfig/vdr2
# The other vdr daemons will however never be restarted
# automatically.

# List of plugins to load, separated by space. Special value "any" as
# one of the entries will expand to a list of all the non-specified
# installed plugins.
# default: load all installed plugins
# VDR_PLUGINS="any"

# Plugin parameters can be set in /etc/sysconfig/vdr-pluginname or
# you can set them manually below. You can also use
# VDR_PLUGIN_ARGS_pluginname in /etc/sysconfig/vdr-pluginname as
# well. Note that using VDR_PLUGIN_ARGS_xxxx in this file disables
# the automatic configuration merging of this file during upgrades.
# If a plugin name contains "-" you have to use "_" in its place.
# examples:
# VDR_PLUGIN_ARGS_someplugin="--example --parameters"
# VDR_PLUGIN_ARGS_another_plugin="--parameter"

# Restart VDR on plugin install/remove/upgrade events. Plugin events
# are triggered only by plugins which are enabled above.
# default: restart VDR when an active plugin is upgraded
# VDR_RESTART_ON_INSTALL=no
# VDR_RESTART_ON_REMOVE=no
# VDR_RESTART_ON_UPGRADE=yes

# List of DVB modules, if you want to modprobe and/or rmmod them
# when VDR starts and stops. Note that harddrake should load the DVB
# modules automatically and that rmmoding them should not be
# necessary. Therefore use this configuration option only if you
# experience problems.
# If you set this, please list only the device drivers. For example
# if you have an FF card, CX88-based card and a Skystar2-based card:
# VDR_DVBMODULES="dvb-ttpci b2c2-flexcop-pci cx88-dvb"
# default: no automatic modprobe or rmmod
# VDR_DVBMODULES=""

# Name of the VDR binary.
# default: "vdr"
# VDR_BINARY="vdr"

# directory where vdr stores its config files.
# default: /var/lib/vdr/config
# VDR_CONFIGDIR="/var/lib/vdr/config"

# amount of log messages, see vdr --help
# default: 3
# VDR_LOGLEVEL=3

# which port to listen for SVDRP commands, 0 to disable
# default: 2001
# VDR_SVDRP_PORT=2001

# watchdog timeout in seconds
# default: no watchdog
# VDR_WATCHDOG=

# use LIRC remote control (yes|no)
# default: no LIRC
# VDR_LIRC=no

# use a given RCU remote control, for example "/dev/ttyS1"
# Note that user vdr has to have access rights to it. Usually
# adding user vdr to group uucp is enough.
# default: no RCU
# VDR_RCU=""

# Use given terminal to control VDR, for example "/dev/tty9".
# Note that user vdr has to have a permission to it.
# If you add user "vdr" to group "tty", VDR will have permissions
# to tty7 and above, but not tty6 and below.
# default: no terminal
# VDR_TERMINAL=""

# set to yes to start vdr with muted sound. no to enable sound
# default: mute disabled
# VDR_MUTE=no

# numbers of dvb cards which vdr should use, separated by space
# default: use all
# VDR_CARDS=""

# shutdown script for vdr, e.g. /etc/vdr/shutdown.sh
# simple example script is provided in the documentation
# default: no script
# VDR_SHUTDOWN_SCRIPT=""

# record script for vdr, e.g. /etc/vdr/record.sh
# default: no script
# VDR_RECORD_SCRIPT=""

# VDR is allowed to die at most VDR_MAX_RESTART times in VDR_RESTART_INTERVAL
# seconds. After that VDR is not restarted anymore.
# default: 3 times
# VDR_MAX_RESTART=3

# vdr is allowed to die at most VDR_MAX_RESTART times in VDR_RESTART_INTERVAL
# seconds
# default: 60 seconds
# VDR_RESTART_INTERVAL=60

# If vdr dies too often, an email will is sent to this address.
# For this to work, /bin/mail has to be present. It is provided
# e.g. in "nail" package.
# default: no email
# VDR_FAIL_MAILTO=""

# reboot after specified number of seconds if vdr died too often
# default: no reboot
# VDR_FAIL_BOOT=

# additional arguments passed to vdr binary
# default: no additional arguments
# VDR_ADDITIONAL_ARGS=""

# reload dvb drivers if vdr crashes (VDR_DVBMODULES should be set too)
# default: no reloading
# VDR_RELOADDVB=no

# user VDR runs as
# default: vdr
# VDR_USER="vdr"

# VDR video dir
# default: /var/lib/vdr/video
# VDR_VIDEO="/var/lib/vdr/video"

# encode special chars in recordings, use with a VFAT video partition
# default: no
# VDR_VFAT=no

# VDR nice level
# default: 0
# VDR_NICE=0

# directory for images from the SVDRP command GRAB
# default: image transfer via telnet only
# VDR_GRAB="-"

# send Dolby Digital audio to stdin of command AUDIO_CMD
# default: audio not sent to stdin of any command
# VDR_AUDIO_CMD=""

# write the EPG data into the given FILE
# '-' disables this
# if FILE is a directory, the default EPG file will be created in that
# directory
# default: epg.data in the video directory
# VDR_EPG_FILE=""

# allow coredumps when not running as root
# default: no
# VDR_USERDUMP=no