; This is a sample ~/.gammurc file.
; In Unix/Linux  copy it into your home directory and name it .gammurc
;                or into /etc and name it gammurc
; In Win32       copy it into directory with Gammu.exe and name gammurc
; More about parameters later
; Anything behind ; or # is comment.
; -----------------------------------------------------------------------------

[gammu]

port = com8:
;model = 6110
connection = irdaphonet
;synchronizetime = yes
;logfile = gammulog
;logformat = textall
;use_locking = yes
;gammuloc = locfile
;startinfo = yes
;gammucoding = utf8
;rsslevel = teststable
;usephonedb = yes

[gammu1]

port = com8:
;model = 6110
connection = fbusblue
;synchronizetime = yes
;logfile = gammulog
;logformat = textall
;use_locking = yes
;gammuloc = locfile
;startinfo = yes
;gammucoding = utf8

; Step 1. Please find required Connection parameter and look into assigned 
; with it port type. With some Connection you must set concrete model

; ================================================================ cables =====
; New Nokia protocol for FBUS/DAU9P
;    Connection "fbus", port type serial
; New Nokia protocol for DLR3/DLR3P
;    Connection "fbusdlr3"/"dlr3", port type serial 
; New Nokia protocol for DKU2 (and phone with USB converter on phone mainboard
;                              like 6230)
;    Connection "dku2phonet"/"dku2", port type dku2
; New Nokia protocol for DKU5 (and phone without USB converter on phone
;                              mainboard like 5100)
;    Connection "dku5fbus"/"dku5", port type dku5
; New Nokia protocol for PL2303 USB cable (and phone without USB converter
;                                          on phone mainboard like 5100)
;    Connection "fbuspl2303", port type usb
; Old Nokia protocol for MBUS/DAU9P
;    Connection "mbus", port type serial
; If you're using ARK3116 cable, you might need -nodtr variant of connection.
; -----------------------------------------------------------------------------
; AT commands for DLR3, DKU5 or other AT compatible cable (8 bits, None
; parity, no flow control, 1 stop bit). Used with Nokia, Alcatel, Siemens, etc.
;    Connection "at19200"/"at115200"/.., port type serial
; AT commands for DKU2 cable
;    Connection "dku2at", port type dku2
; ============================================================== infrared =====
; Nokia protocol for infrared with Nokia 6110/6130/6150
;    Connection "fbusirda"/"infrared", port type serial
; Nokia protocol for infrared with other Nokia models
;    Connection "irdaphonet"/"irda", port type irda
; -----------------------------------------------------------------------------
; AT commands for infrared. Used with Nokia, Alcatel, Siemens, etc.
;    Connection "irdaat", port type irda
; -----------------------------------------------------------------------------
; OBEX for infrared
;    Connection "irdaobex", port type irda. Must be used with model "obex"
; ============================================================= Bluetooth =====
; Nokia protocol with serial port set in BT stack (WidComm, other) from
; adequate service and Nokia 6210
;    Connection "fbusblue", port type serial
; Nokia protocol with serial port set in BT stack (WidComm, other) from
; adequate service and other Nokia models
;    Connection "phonetblue", port type serial
; -----------------------------------------------------------------------------
; Nokia protocol for Bluetooth stack with Nokia 6210
;    Connection "bluerffbus", port type BT
; Nokia protocol for Bluetooth stack with DCT4 Nokia models, which don't inform
; about services correctly (6310, 6310i with firmware lower than 5.50, 8910,..)
;    Connection "bluerfphonet", port type BT
; Nokia protocol for Bluetooth stack with other DCT4 Nokia models
;    Connection "bluephonet", port type BT
; -----------------------------------------------------------------------------
; AT commands for Bluetooth stack and 6210 / DCT4 Nokia models, which don't
; inform about BT services correctly (6310, 6310i with firmware lower 
; than 5.50, 8910,..)
;    Connection "bluerfat", port type BT
; AT commands for Bluetooth stack with other phones (Siemens, other Nokia,etc.)
;    Connection "blueat", port type BT
; -----------------------------------------------------------------------------
; OBEX for Bluetooth stack with DCT4 Nokia models, which don't inform about
; BT services correctly (6310, 6310i with firmware lower than 5.50, 8910,...)
;    Connection "bluerfobex", port type BT
; OBEX for Bluetooth stack with other phones (Siemens, other Nokia, etc.)
;    Connection "blueobex", port type BT. Must be used with model "obex"
; -----------------------------------------------------------------------------
;    Connection "bluerfgnapbus", port type BT, model "gnap"
;    Connection "irdagnapbus", port type irda, model "gnap"

; Step2. According to port type from Step1 and used OS set Port parameter

; -----------------------------------------------------------------------------
; Port type | "Port" parameter in Windows/DOS | "Port" parameter in Linux/Unix
; ----------|---------------------------------|--------------------------------
; serial    | "com*:"                         | "/dev/ttyS*"
;           | (example "com1:")               | (example "/dev/ttyS1")
;           |                                 | or "/dev/tts/**" (with DevFS)
; ----------|---------------------------------|--------------------------------
; irda      | ignored (can be empty)          | "/dev/ircomm*"
; ----------|---------------------------------|--------------------------------
; BT        |                 Bluetooth device address
;           |                 (example "")
; ----------|---------------------------------|--------------------------------
; dku2      | ignored (can be empty)          | /dev/ttyUSB* or /dev/ttyACM*
; ----------|---------------------------------|--------------------------------
; dku5      | ignored (can be empty)          | connection with it not possible
; ----------|---------------------------------|--------------------------------
; usb       | connection with it not possible | "/dev/ttyUSB*"

; Step3. Set other config parameters

; -----------------------------------------------------------------------------
; Parameter name  | Description
; ----------------|------------------------------------------------------------
; Model           | use only, when Gammu doesn't recognize your phone model.
;                 | Put it here. Example values: "6110", "6150", "6210", "8210"
; SynchronizeTime | if you want to set time from computer to phone during
;                 | starting connection. Do not rather use this option when
;                 | when to reset phone during connection (in some phones need
;                 | to set time again after restart)
; GammuLoc        | name of localisation file
; StartInfo       | this option allow to set, that you want (setting "yes")
;                 | to see message on the phone screen or phone should enable
;                 | light for a moment during starting connection. Phone
;                 | WON'T beep during starting connection with this option.
; GammuCoding     | forces using specified codepage (in win32 - for example
;                 | "1250" will force CP1250) or UTF8 (in Linux - "utf8")
; ----------------|------------------------------------------------------------
; Logfile         | Use, when want to have logfile from communication.
; Logformat       | What debug info and format should be used:
;                 |   "nothing" - no debug level (default)
;                 |   "text"    - transmission dump in text format
;                 |   "textall" - all possible info in text format
;                 |   "errors"  - errors in text format
;                 |   "binary"  - transmission dump in binary format
; ----------------|------------------------------------------------------------
; Use_Locking     | under Unix/Linux use "yes", if want to lock used device
;                 | to prevent using it by other applications. In win32 ignored
; ----------------|------------------------------------------------------------
; RSSLevel        | Should Gammu connect to blog.cihar.com and check for new
;                 | versions ?
;                 | if yes, there will be taken 
;                 | blog.cihar.com/archives/gammu_releases/index-rss.xml file, 
;                 | read latest version
;                 | numbers and (if any exist) displayed info to user on each
;                 | application startup
;                 |   "teststable" - check for latest stable and test versions
;                 |   "stable"     - check for latest stable versions
;                 | No private data are sent to server, Internet connection
;                 | to blog.cihar.com on port 80 required
;                 | By default option not active
; ----------------|------------------------------------------------------------
; UsePhoneDB      | Should Gammu connect to www.gammu.org and check for latest
;                 | firmware versions for device ?
;                 | if yes (value "yes"), there will be taken 
;                 |www.gammu.org/gammunet/support/phones/phonedbxml.php?model=x
;                 | file, read all phone details from it and (if any
;                 | higher firmware exist) displayed info to user on each
;                 | application startup
;                 | No private data are sent to server, Internet connection
;                 | to www.gammu.org on port 80 required
;                 | By default option not active