GKrellMSS Theming ================= This GkrellM Sound Scope plugin may be themed by setting values in the gkrellmrc and by putting custom images in the "sound" subdirectory of a theme. Images may be .png, .jpg, or .xpm. See the Themes document at http://gkrellm.net for an explanation of krell_expand modes. GKrellMSS 2.0 requires at least GKrellM version 2.0.0. Standard Theme Images --------------------- sound/bg_panel.png sound/krell.png - is not used Custom Theme Images ------------------- sound/button_sweep_dn.png sound/button_sweep_up.png sound/krell_vu.png sound/krell_vu_peak.png sound/krell_sensitivity.png sound/spectrum_bar.png sound/spectrum_bar_light.png The spectrum_bar images should be 3 pixels wide and they will be rendered to the chart height. The spectrum analyzer mode draws vertical bars of either width 2 or 1 pixels and these are picked out of the 3 pixels in the images. The leftmost 2 are used for the 2 pixel bars and the rightmost 1 is for the 1 pixel bar. gkrellmrc Settings (values shown are the program defaults) ------------------ # The vertical offset into the panel of the sweep buttons: set_integer sound_button_sweep_yoff 3 # Set some values for the standard krell even though it is not used. This is # because a custom style will be initialized to standard krell values at the # first setting of a custom style value. Note that the standard krell in # turn has inherited its initial values from the global default meter style. # So it is a good idea to specify all the default values, and they must be # specified before any sound.custom_name lines. If no standard or custom # StyleMeter sound.xxx settings are in the gkrellmrc, then values used will be # program coded defaults. StyleMeter sound.krell_yoff = 0 StyleMeter sound.krell_depth = 1 StyleMeter sound.krell_x_hot = -1 StyleMeter sound.krell_expand = none StyleMeter sound.krell_left_margin = 0 StyleMeter sound.krell_right_margin = 0 # Set values for the vu krells that differ from the default values. # Also, GKrellMSS code looks at the krell_left_margin and if it is zero, will # force the krell left margin to be at the right edge of the sweep buttons. StyleMeter sound.vu_left.krell_yoff = 3 StyleMeter sound.vu_left.krell_x_hot = 59 StyleMeter sound.vu_left.krell_expand = left StyleMeter sound.vu_right.krell_yoff = 9 StyleMeter sound.vu_right.krell_x_hot = 59 StyleMeter sound.vu_right.krell_expand = left StyleMeter sound.vu_left_peak.krell_yoff = 2 StyleMeter sound.vu_left_peak.krell_depth = 5 StyleMeter sound.vu_right_peak.krell_yoff = 8 StyleMeter sound.vu_right_peak.krell_depth = 5 # All default krell values are good for the sensitivity krell. But if # any settings are needed, they would be like: #StyleMeter sound.sensitivity.krell_yoff = 0 # The sensitivity krell is normally in an "up" position and is moved to a # "down" or visible position when the mouse enters the GKrellMSS panel. # These variables control the up and down y positions. set_integer sound_krell_sensitivity_y_up -10 set_integer sound_krell_sensitivity_y_dn 0
