Sophie

Sophie

distrib > * > cooker > x86_64 > by-pkgid > 1acc97dcf884c05b37321eab15ec4372 > files > 29

powerman-2.3.9-2.x86_64.rpm

# HP Management Processor device (MP) for mid-range cellular systems
#
# (c) Copyright 2009 Hewlett-Packard Development Company, L.P.
#	Bjorn Helgaas <bjorn.helgaas@hp.com>
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License version 2 as
# published by the Free Software Foundation.
#
# Example:
#	device "rx8620-001" "hpmpcell" "rx8620-001-mp.test:23"
#	node "rx8620-001-p0" "rx8620-001" "0"
#
# Tested on:
#	rx8620 (MP firmware A.7.008, A.8.005)
#
# This handles each partition separately.  The "plug" argument to node is the
# partition number.
#
# N.B. This only works on mid-range, e.g., rx7620, rx7640, rx8620, and rx8640.
# It doesn't handle Superdome because Superdome uses "P" to select partition,
# not "R".  It should support PA-RISC systems, e.g., rp7620, rp7640, etc.

specification  "hpmpcell" {
	timeout 10

	script login {
		expect "MP login: "
		send "Admin\r\n"
		expect "MP password: "
		send "Admin\r\n"
		expect "MP> "
		send "cm\r\n"
		expect "MP:CM> "
	}
	script status {
		send "pe\r\n"
		expect "Select Device: "
		send "r\r\n"
		expect "Select a partition number: "
		send "%s\r\n"
		expect "The power state is (ON|OFF)"
		setplugstate $1 on="ON" off="OFF"
		expect "In what state do you want the power.*\? "
		send "q\r\n"
		expect "MP:CM> "
	}
	script on {
		send "pe\r\n"
		expect "Select Device: "
		send "r\r\n"
		expect "Select a partition number: "
		send "%s\r\n"
		expect "The power state is (ON|OFF)"
		setplugstate $1 on="ON" off="OFF"
		expect "In what state do you want the power.*\? "
		send "on\r\n"
		expect "MP:CM> "
	}
	script off {
		send "pe\r\n"
		expect "Select Device: "
		send "r\r\n"
		expect "Select a partition number: "
		send "%s\r\n"
		expect "The power state is (ON|OFF)"
		setplugstate $1 on="ON" off="OFF"
		expect "In what state do you want the power.*\? "
		send "off\r\n"
		expect "MP:CM> "
	}
	script reset {
		send "rs\r\n"
		expect "Select a partition number: "
		send "%s\r\n"
		expect "Do you want to reset partition number.*\? "
		send "y\r\n"
		expect "MP:CM> "
	}
}