- fix a small issue in mymemmem/mymemrmem when HAVE_MEMMEM/HAVE_MEMRMEM is not defined
september 2005:
- version 1.2.12
- colored (fruit salad) display built by default (if use_default_colors available),
available through option --color (based on a patch from Yuri D'Elia)
september 2005:
- version 1.2.11
- add --enable-colors to build and have a colored (fruit salad) display
- allow entering goto "position" and "sector" in hexadecimal or not
- when prompting, propose previously entered value, and give ability to modify it
- fix setting mark after scrolling
- some cleanup
may 2004:
- version 1.2.10
- handle getnstr() not defined (needed for SGI IRIX 6.5.22)
april 2004:
- version 1.2.9 (brown paper bag version)
- fix searching larger than 3 characters long strings
january 2004:
- version 1.2.8
- replace the unsafe getstr() with getnstr() (thanks to Richard Chadderton)
august 2003:
- version 1.2.7
- check the presence of <sys/mount.h> before including it
- fix build on Digital UNIX 4.0f (remove -Wall)
- use the full width of the terminal (the trick is to stop relying on
printing "\n", but using move() instead)
- fix displaying the offsets at beginning of each line on big endian
boxes (thanks to Martin Schaffner)
june 2003:
- version 1.2.6
- fix core dump when searching backward (thanks to Jean Delvare)
(the culprit is memrmem, but also fixing provided memrchr)
june 2003:
- version 1.2.5
- fix build on Solaris (which doesn't have BLKGETSIZE and all compilers don't have -W)
march 2003:
- version 1.2.4
- use BLKGETSIZE to try to get the size of a device
- do not die horribly when accessing after the end
- fix provided memrchr() (thanks to Yue Luo)
- fix displaying after searching >32bit files (thanks to Paul Mattal)
june 2002:
- version 1.2.3
- add some KEY_HOME KEY_END (^[[7~ and ^[[8~)
- fix for HAVE_MEMMEM
- fix my memrchr not behaving the same as libc's
- fix the use of memrchr to behave as libc's
- use "(void)" in prototype of functions having no parameters
- call "raw()" when help() is over
october 2001:
- version 1.2.2
- yet again some s/int/INT/ (mainly in the "edited" list manipulation)
june 2001:
- version 1.2.1
- replace llseek with lseek + use of _FILE_OFFSET_BITS=64
- memrchr&memmem now exists in some glibc's, so define it only if not provided
- cleanup basename declaration
- various cleanup in configure.in, now using autoheader
- a few bug fixes
april 99:
- version 1.1.1
- replaced lots of int by INT which 64bits
- replaced lseek by llseek (!! portability=linux :( !!)
11 january 99: (:-<>, it's been a long time)
- added many shortcuts so that F1..F12 and some others works on more
terms (xterm, rxvt, sgi's winterm...)
- removed the scanw that's badly handled on sgi (replaced by getstr +
sscanf)
24 septembre 98: now displays the reached offset while searching
10 september 98: hexedit 1.0.0 release
08 september 98: Oliver Kiddle's <opk@thoth.u-net.com> changes:
- changed code where a function that returns a void was returning the
result of another function. This avoids errors in stricter compilers
- used an if where ?: was being used to the left of an assignment
- created Makefile.in and configure.in to replace Makefile
- added alternative strdup, strerror and memcmp for lacking systems
26 august 98: hexedit 0.9.5 release
26 august 98: removed the total file size in modeline for devices
19 august 98: Evin Robertson's changes:
- split hexedit.c into display.c, file.c, hexedit.c, hexedit.h,
interact.c, mark.c, misc.c, page.c, search.c
- Makefile changes - now defaults to installing in /usr/local/bin
- scrolls one line at a time (but not in sector mode)
- allow appending to the file
- errors during writing are now non-fatal
- show total file size in modeline (not really correct for devices)
- gives better error messages when functions return -1
- added newlines to the end of fatal error messages
- changed sizeof(bufferAttr) to sizeof(*bufferAttr)
- grammatical corrections to the man page
- removed dashes so the display is 16 bytes wide on an 80 column
screen
- backspace now moves back an entire byte in hex mode (I thought the
previous behavior was inconsistent; it moved the cursor one
nybble, but undid an entire byte)
- refuse to open directories
- disallow using return to go past the end of the file
- added truncating ability (M-T)
07 august 98: ability to fill the selection with a string
06 august 98: forgot to mark all the things while doing them. Here is a list of
what's been added:
- make the display start at the current cursor position
- go to a sector when in --sector mode
- added a modeline
- ability to open another file. Nice for copy&paste between files
- you're no more forced to save the file per page. This means the
cut&paste can now always be undone. It's much simplier that way (idea
from Evin C Robertson, thanks)
- the backspace acts as a small undo of the previous character. It's
nice when typing (another idea from Evin C Robertson)
- the modified-unmodified bytes are not shown in bold (eg: you replace
'a' by 'a')
26 july 98: added a TODO file
26 july 98: added save copied region in a file
26 july 98: added search backward
25 july 98: added copy&paste functions
25 july 98: you can now select a part of the buffer
21 july 98: modified bytes are shown in bold.
21 july 98: corrected a bug, when you call function goto_char and the file is
modified, you're now asked if you want to save (before that the changes
were lost). You're only asked if the goto_char gets you to a different
page of the file.
21 july 98: replace the searchInBuffer function by memmem. Then replaced memmem
by mymemmem to counter the libc bug. All this permits a good speedup
when searching.
21 july 98: removed the bug in the goto_char function. Now giving an empty
string leaves the cursor unmoved. A small bug remains if you give an
invalid hexadecimal string starting legally. The scanw(3ncurses)
function returns a number corresponding at the legal beginning substring
(eg: 1z2 becomes 1).
21 july 98: added an install entry in the Makefile (the one Robert Woodcock
<rcw@oz.net> made for the debian package, thanks Robert Woodcock).
21 july 98: creation of the Changes file
