; ; isdn4linux ; ; Configuration file ; [interfaces] ; ; By default, incoming calls should come in on the "remote" context ; context=remote ; ; Modem Drivers to load ; driver=aopen ; modem by AOpen ;driver=i4l ; isdn4linux - an alternative to i4l is to use chan_capi ; ; Default language ; ;language=en ; ; We can optionally override the auto detection. This is necessary ; particularly if callweaver does not know about our kind of modem. ; ;type=autodetect ;type=aopen ; ; We can strip a given number of digits on outgoing dialing, so, for example ; you can have it dial "8871042" when given "98871042". ; stripmsd=0 ; ; Type of dialing ; dialtype=tone ;dialtype=pulse ; ; Mode selection. "Immediate" means that as soon as you dial, you're connected ; and the line is considered up. "Ring" means we wait until the ring cadence ; occurs at least once. "Answer" means we wait until the other end picks up. ; ;mode=answer ;mode=ring mode=immediate ; ; List all devices we can use. ; ;device = /dev/ttyS3 ; ; ISDN example (using i4l) ; ;msn=39907835 ;device = /dev/ttyI0 ;=============== ; More complex ISDN example ; ; A single device which listens to 3 MSNs ; the wildcard '*' can be used when all MSN's should be accepted. ; (The incoming number can be used to go directly into the extension ; with the matching number. I.e. if MSN 33 is called, (context,33) ; will tried first, than (context,s) and finally (default,s). ; ;msn=50780020 ;incomingmsn=50780020,50780021,50780022 ;device = /dev/ttyI2 ; ; If set, only these numbers are allowed to be set as A number ; when making an outbound call. callerid is used to set A ; number. ;outgoingmsn=50780023,50780024 ; ; Set DTMF-detection/generation mode to: ; callweaver: Let CallWeaver do inband detection (default) ; i4l: Use the inband detection made by ISDN4Linux ; none: Don't detect inband DTMF ; both: Transmit using both in-band and out of band (generation only) ; ; You may specify either one mode, or the detection/generation mode ; individually separated by a '/'. ; ;dtmfmode=callweaver ; Detect using CallWeaver ;dtmfmode=callweaver/both ; Detect using CallWeaver, generate w/ both ; two other devices, which are in group '1' and are used when an ; outgoing dial used: exten = s,1,Dial,Modem/g1:1234,60,r ; (we do not need more outgoing devices, since ISDN2 has only 2 channels.) ; Lines can be in more than one group (0-63); comma separated list. ; group=1 ; group=1,2,3,9-12 ;msn=50780023 ;device = /dev/ttyI3 ;device = /dev/ttyI4
