<!doctype HTML public "-//W3O//DTD W3 HTML 2.0//EN"> <HTML> <HEAD> <TITLE>gifpos</TITLE> <link rev=made href=mailto:esr@snark.thyrsus.com> </HEAD> <BODY> Go to <a href="index.html">index page</a>. <CENTER><H1>gifpos</H1></CENTER> A program to change GIF screen size and/or reposition images. No test is made to make sure changes will generate valid GIF files (i.e. images are still confined to screen etc.)<P> <H1>Usage:</H1> <pre> gifpos [-q] [-s Width Height] [-i Left Top] [-n n Left Top] [-h] gif-file </pre> If no gif-file is given, GifPos will try to read a GIF file from stdin.<P> <H1>Memory required:</H1> Line. <H1>Options:</H1> <DL> <DT> [-q] <DD> Quiet mode. Default off on MSDOS, on under UNIX. Controls printout of running scan lines. Use -q- to invert.<P> <DT> [-s Width Height] <DD> Set the new screen dimensions, so for example `-s 1000 800' will set screen to width of 1000 and height of 800.<P> <DT> [-i Left Top] <DD> set image relative to screen position, so for example `-i 100 80' will set image left position to 100 and top position to 80. This sets the position of the first image only.<P> <DT> [-n n Left Top] <DD> set image n relative to screen position, so for example '-n 3 100 80' will set the third image position as in 2.<P> <DT> [-h] <DD> Print one line of command line help, similar to Usage above.<P> </DL> <H1>Author:</H1> Gershon Elber <HR> <ADDRESS>Eric S. Raymond <A HREF="mailto:esr@thyrsus.com"><esr@snark.thyrsus.com></A></ADDRESS> </BODY> </HTML>
