CHANGES, mtx 1.3.12
- Incorporate debian packaging
- Remove strip of binaries
- Remove unsupported nsmhack from list of binaries built by default
- Add support for building outside of source tree
- Update copyrights
- Fix typo in mtx.1 man page
- Clear outstanding UNIT ATTENTION state at start
CHANGES, mtx 1.3.11
- loaderinfo: Print RequestSense information if an operation fails.
- loaderinfo: Print all information from the Device Configuration Page.
- mtx: Fix problems with a lot of loaders determining the number of elements.
- mtx: Implement Previous command.
- mtx: Fix bugs in Last command.
- scsieject: New tool that handles start/stop, load/unload.
- tapeinfo: Fix inconsistencies in output.
- Fix timeout handling on Linux.
- Merge in fixes from the Debian and FreeBSD distributions.
CHANGES, mtx 1.3.10
- Add support for Microsoft Windows.
- Add support for Sony VGP-XL1B(2) Media Changer.
Thanks to Will (nodenet at hotmail dot com)
- Add build support for Microsoft Windows using MinGW native and Linux
cross-compile.
- Add build support for Microsoft Windows using Microsoft Visual Studio 2005.
- Add support for building on x86_64.
- Add more debugging information.
- Eliminate compiler warnings.
CHANGES, mtx 1.3.9
- Cleaned up scsi_linux.c a little to eliminate around 40 lines of code.
- Change to using SG_IO ioctl rather than write-read interface. This
should make us a little safer, as well as (on 2.6.x) letting us issue SCSI
commands to regular block devices as well as to /dev/sgXX devices.
WARNING: Can cause the system to *CRASH* if the SCSI device is in use, due
to brokenness inside the Linux kernel! It's always preferable to use the
/dev/sgXX device, which has specialness in its buffer handling that bypasses
some of the brokenness elsewhere in the SCSI subsystem.
- Check SG version before using SG_IO interface, so that if we're run on a
Linux 2.2 system and we were compiled on Linux 2.4 or above,
- If a tape is in the drive, make tapeinfo print out its partition info. Seems
to work on my DAT drive, anyhow (shrug).
- Minor cleanups in mtxl.c (other cleanups necessary in tapeinfo and etc.).
CHANGES, mtx 1.3.8
- Forgot about 8 bytes for header
- Handle pedantic loader whose firmware writer spends too much time
parsing phrases in the SCSI spec and not enough time in the
real world.
CHANGES, mtx 1.3.6
- The You Gotta Be F'ing Kidding Release (see rant on mailing list)
- Added AIX support with http://fz.eryx.net/aix/ GSC driver, courtesy
of Steve Heck.
- Make __WEIRD_CHAR_SUPPRESS the default to stop barcode garbling
- Fix core dump on invalid inputs in mtx.c
- Add retry with bigger ALLOCATION_LENGTH if
BYTE_COUNT_OF_REPORT_AVAILABLE is > than our original estimate. (see rant
on mailing list).
- Shut up the low-level SCSI sg_read and sg_write routines, which were poofting
all over the place on innocuous things like no EAAP.
CHANGES, mtx 1.3.5
- The I-Need-A-Job Release (see http://badtux.org) :-}
- Change Makefile so that it works w/systems whose 'install' program
accepts only one argument. That's it.
- Uncomment the Exabyte hack in the drive parsing code so that it works
with ATL loaders again.
- Add hack for ATL stacked loaders to keep them from reporting ghost slots
CHANGES, mtx 1.3.4
- Forward-ported the ATL/Exabyte patches from mtx 1.2
- Added progress indicator to 'tapeinfo' for DAT drives. (PLEASE TEST)
- Purged a few more estinc.com out of the documentation, point to bru.com.
CHANGES, mtx 1.3.3
- Reversed James' long descriptor patch until can figure out what's wrong with
it.
- Fixed some debug declarations, courtesy of Kevin Wang.
- Point COMPATIBILITY file at mtx.sourceforge.net.
CHANGES, mtx 1.3.2
- Merged Makefile changes from mtx-1.2 code
- Changes from James Dugal to get all info for newer loaders, fix debugging
CHANGES, mtx 1.3.1
- add an Exchange command
CHANGES, mtx 1.3.0
- New Linux SCSI subsystem interface for 2.4 kernels, ripped boldly
from sgtools by Doug Gilbert
- mtx 'next' now skips blank slots, courtesy of Christopher McCrory
- mtx 'unload' now prints an error message telling you that you need to
eject the tape in the drive prior to unloading it, under certain
conditions.
- Started work on 'nsmhack' for controlling NSM jukeboxes.
- copy_barcode was off by one.
- 'position to element' command now added, courtesy of Mahlon Stacy
CHANGES, mtx 1.2.15:
- Some Solaris fixes, courtesy of Matt Ward
- Fix URL in .spec file
CHANGES, mtx 1.2.14:
- Fix so it'll work if 0 is result of SCSI open (e.g., in cron jobs on Linux)
- Move changelog to end of .spec file for easier reading
- Added a bit of text to beginning of COMPATIBILITY file
CHANGES, mtx 1.2.13:
- Fixed some autoloader bugs w/autoloaders that don't report an arm.
- Fixed barcode backoff.
- Added "nobarcode" option
- Increased timeout for 'mtx inventory' to 30 minutes
(note: may increase this even more if needed, please let me know!)
- Shortened timeout for 'mtx inquiry' to 30 seconds
- tapeinfo now prints SCSI ID/LUN info if available (only on Linux at the
moment, sigh).
- update documentation w/new email addresses, updated compile directions,
various fixes.
CHANGES, mtx 1.2.12:
- Fix FreeBSD compile bugs
- Fix SGI compile bugs
- Add HP/UX port (I hope!), courtesy of William Smith.
- Re-wrote ReadElementStatus to make work for %!@# brain dead firmware that
reports non-existent drives (I hope!). Also has side-effect of now working
with multiple-arm libraries (though it only sees first arm!).
- Cleaned up all -Wall messages.
- Cleaned up Linux Sparc, installs loaderinfo.1, courtesy of Matt Dainty.
- tapeinfo now reports status of CheckUnitReady.
- tapeinfo no longer puts out Block Position if CheckUnitReady says 'no'.
- tapeinfo now puts out Density Code and Medium Type/Not Loaded (modification
of patches sent in by Bob Rahe)
CHANGES, mtx 1.2.11:
- Added a GNU autoconf Makefile.in (still provide a Makefile for your use)
*WARNING* autoconf is not yet working on all supported OS's! You may need
to do the old-fashioned 'edit Makefile' bit!
- Changed mtx.h and mtxl.c to include and define various things based upon
what features autoconf detected (e.g., if 'camlib.h', use FreeBSD-style
'cam', if 'scsi/sg.h' use Linux-style 'sg', etc.). If I ever port to a
Unix that has same SCSI interface as one of the existing ports, autoconf
will handle it without me having to add another set of #if's or #ifdefs.
- Went ahead and tossed mtxctl into contrib.
- In 'tapeinfo', skip \0 characters in serial numbers (some use \0
terminator, some do not, skip it if this one does).
- in 'tapeinfo', dump out the block position and (if at BOP) the "BOP: Yes"
flag. Also dump out other info such as block limits.
- Put file 'sparc-patch1' contributed by Chaskiel M Grundman, and applied
it (sigh)
- Added tapeinfo.py to 'contrib' directory
- Updated mtx.py in 'contrib' directory
- Created 'loaderinfo' program to report some misc. info about loaders.
- Created 'scsitape' program so that I don't have to keep messing with
#@$%@! tape ioctls on the various Unixes that I'm porting tape software
to. (But see the warnings!).
- Applied the Solaris patch to the read_element_status command (sigh).
- Added timeout adjustment to the SCSI subsystem.
- WARNING: DIGITAL UNIX AND VMS ARE PROBABLY IRREPERABLY BROKEN, due to the
timeout changes to the SCSI subsystem. If anybody wishes to fix them,
feel free to send me patches.
- added contrib program "mtx-changer" (an Amanda tape changer script for
?Solaris? that uses mtx rather than stc)
- Jiggered Linux SCSI module for smarter error conditions handling (there are
some error conditions that are normal for READ of tape drives).
- Added contrib program "config_sgen_solaris.sh" which should ease
setting up the 'sgen' driver on Solaris 8 (still no easy Solaris 7 or
below config).
CHANGES, mtx 1.2.10:
- Added FAQ and COMPATIBILITY (feel free to send me patches to these files!)
- Added LICENSE
- Added serial number to 'tapeinfo' output.
- Fixed stupid syntax error in mtx.c (compiled with gcc, not with others!)
- Fixed spec file for building rpms (maybe).
- Added an 'erase' command (undocumented) for use on Linux for doing
short erases on tapes (the Linux device driver defaults to a long erase).
- Made mtx inventory return an error code if the inventory
fails, so that we can wait for inventory to be completed at system
startup for libraries that auto-inventory (sigh).
CHANGES, mtx 1.2.9:
- Added an 'eject' command that, if directed to a tape drive, will eject the
tape, and for some autoloaders, if directed to LUN 1, will eject the entire
magazine.
- Fixed the 'transfer' command to be 1 based rather than 0 based (sigh)
- Now properly reports bar code for the tape that's in the tape drive.
- Added some miscellaneous Python and Perl scripts to 'contrib'. Thanks
to Frank Samuelson for the Perl scripts.
CHANGES, mtx 1.2.8:
- Spec file has been changed to use the "portable" patch supplied by Red
Hat so it should work on Linux Alpha and Linux SPARC too... maybe...
- Now will accept 4-byte element status for most element types, despite fact
that these don't comply with SCSI standards :-(. This should make many
older changers work, including HP optical changers.
- Fixed PeripheralDeviceType table, courtesy of Rob Turk.
- Now looks for CHANGER environment variable if a device is not specified
on the command line. If can't find CHANGER, then tries TAPE environment
variable.
- Properly sets TransportElementAddress in the CDB for the MOVE MEDIUM command
with what was discovered via the READ_ELEMENT_STATUS command, rather
than setting them to zero (SCSI spec says that zero should be the default
arm, but at least one changer out there didn't like it).
- Added a '--version' command (sigh).
- Added an 'inventory' command for Breece Hill libraries that don't
automatically do an inventory at powerup.
CHANGES, mtx 1.2.7:
- Fixed problem w/single drive Exabyte 220 reporting element status data for
both drives (sigh).
- some general cleanup in the barcode fallback code (what a cruft!). Discovered
that ADIC DAT AUTOCHANGER does not work w/mtx because it produces
gibberish (will apparently only produce one element status page per request).
- Fixed the RPM .spec file to have updated file locations, doc locations.
- Fixed MoveMedium to say 'Output' for direction, to make it work with
Solaris 8
- Some changes to the Solaris low-level module to report more errors (though
it still doesn't work as well as the Linux low-level module). Should now
work properly with Solaris 2.6/7/8. (Solaris changes courtesy of Richard
Fish of Enhanced Software Technologies).
CHANGES, mtx 1.2.6:
- Fixed 'eepos' stuff to use | rather than || (whoops!)
- Accept a 4-byte element descriptor for the robot arm for certain older
autochangers.
CHANGES, mtx 1.2.5:
- Added 'noattach' command. If on command line prior to other commands, forces
them to use the regular SCSI changer API rather than the _ATTACHED API,
no matter what the _ATTACHED bit in the Inquiry page said.
- Created 'tapeinfo' program.
CHANGES, mtx 1.2.4:
- Major overhaul of element guts to dynamically allocate the arrays
using the result of a MODE_SENSE on the Element Address Assignment
Page. If mtx 1.2.3 works for you and mtx 1.2.4 does NOT work for you,
please un-comment the '#define DEBUG_MODE_SENSE' in file 'mtxl.c' and
EMAIL me the results.
CHANGES, mtx 1.2.3:
- Fixed the source storage element number stuff (again, sigh)
- Because of above fix, 'next' etc. ought to work right again.
CHANGES, mtx 1.2.2:
- Fixed that it was saying everything was an Import/Export element (oops!)
- Properly update the Import/Export element count.
CHANGES, mtx 1.2.1:
- Now explicitly output that a Storage element is in fact an Import/Export
element.
- Added 'transfer' command to transfer between two Storage elements (so that
you can get a tape to an Import/Export element.
- Added 'eepos' command for controlling tray retraction on the Breecehill
import/export trays. (Works with "load" and "unload" commands too, though
that is not documented on "mtx -h").
CHANGES, mtx 1.2.0:
- Re-numbered now that Leonard has asked me to take over maintenance of the
'mtx' program.
- Temporarily treat Import/Export elements the same as Storage elements. Need
to fix this eventually so that the GUI knows what kind of element we're
talking about.
- Removed quotes from the source element # to make it easier to parse
from Perl or Python (just do a split on spaces).
- Added sample program, 'mam2debug', showing how to use mtxl library for
your own programs (this happens to dump the Exabyte Mammoth 2's internal
debug buffer to a file, using the Mammoth2-specific SCSI commands to do so).
CHANGES, mtxl 1.4.8:
- Whoops, report logical rather than physical when I have to scan for
open slots :-).
CHANGES, mtxl 1.4.7:
- Update comment to reflect mtxl 1.4.6 stuff :-).
- Fix the part of the code that scans for open slots as sources for media.
CHANGES, mtxl 1.4.6:
- Don't use _ATTACHED interface if it reports itself as a Medium Changer!
CHANGES, mtxl 1.4.5:
- Changed "whoops" compile error on Linux (teach me to release w/o testing on
the most popular platform!)
- Changed declarations to remove compile-time warnings.
CHANGES, mtxl 1.4.4:
- Added support for FreeBSD. (uses pass device, NOT native FreeBSD ch device).
- Change all 'int' DeviceFD to DEVICE_TYPE DeviceFD. Note that SGI and FreeBSD
use a struct * to access the CAM SCSI layer, rather than a file fd.
- Fixed goof where I'd hard-wired max # of elements to 127 for testing
purposes (it should be sum of MAX_STORAGE_ELEMENTS + MAX_TRANSFER_ELEMENTS
+ MAX_TRANSPORT_ELEMENTS from mtx.h -- change those if you need more
elements, bearing in mind that the code for ReadElementStatus in
mtxl.c maxes out at 255 elements unless you fix that too).
- Cleaned some cruft out of the MOVE_MEDIUM code.
- Must have GNU Make to process Makefile. In reality, I don't know of
any machine where we voluntarily use the native 'make' command, because
a) there's a half dozen native 'make' all with their own perverted
syntaxes, and b) most of them are brain dead beyond belief.
CHANGES, mtxl 1.4.3:
- Do an INQUIRY prior to doing a MOVE_MEDIUM or READ_ELEMENT_STATUS so that I
can detect the MChanger bit and use MOVE_MEDIUM_ATTACHED or
READ_ELEMENT_STATUS_ATTACHED commands instead.
- Successfully tested with dual drives!
- first, next, last now working
- Created a man page
- Created a 'make install', edit Makefile to alter destinations.
CHANGES, mtxl 1.4.2:
- Found the problem with the DAT changer! It was burping on the
'bar code' bit... so I intercept that sense key, re-issue w/out the
'bar code' bit, and success!
- Added a 'TODO' file...
CHANGES, mtxl 1.4.1:
- Added 'invert' qualifier to 'load' and 'unload' commands to invert
the media (for HP optical jukeboxes). Type './mtx' by itself to
see the syntax.
- Figured out why my code wasn't properly detecting errors --
turns out the 'sg' device can return ok
status even when there is sense data to be reported!
- Still to fix: *still* isn't working right with my Seagate
6-tape DDS-4 DAT changer... also need to put the
second drive into the Exabyte 220 to make sure the dual-drive stuff
works properly (!).
CHANGES, mtxl 1.4:
- Have now tested the barcode (volume tag) stuff. It works! (Well, there was
an index-by-one problem that I had to squash, but after that...)
- Changed to use SCSI Generic device API on Linux rather than
SCSI_IOCTL_SEND_COMMAND API, which cut things off at 4095 bytes on i386
Linux.
- Added a bunch of debugging output that needs to be ripped out :-(.
Make sure you remove the -DDEBUG from the Makefile, and probably
-DLONG_PRINT_REQUEST_SENSE too (unless you LIKE sense results that make
sense!)
- Still have annoying bug on Linux of only reading 1st 16 bytes of sense
data. Alas, this appears to be a problem in the Linux 2.2 kernel, not in
anything that we're doing :-(. Hmm... cdrecord has the same problem, Mr.
Schilling says he's been saying it's a problem since 1997. Sigh.
- Still need to test the dual-drive stuff!
CHANGES, mtxl 1.3:
- Hacked in the barcode (volume tag) stuff. NEED SOMEONE TO TEST
WHETHER IT WORKS!
- started issuing redundant initial READ_ELEMENT_STATUS with Allocation Length
of 8 in order to get a BYTE_COUNT_OF_REPORT_AVAILABLE in order to calculate a
better Allocation Length for the "real" READ_ELEMENT_STATUS. Trying to send a
query to a small 6-tape changer with an Allocation Length suited for a
200-element tape library was resulting in some errors and lockups on the
part of the tape changer device.
- first, last, next, previous are STILL broken. Sorry :-(.
CHANGES, mtxl 1.2:
- Changed many output messages to make them more easily parsed by
scripts written in awk/perl/python
- Extracted out a library of SCSI tape library routines usable by "C"
programs (must be GPL'ed). Extensive re-arranging of code.
- Added support for multiple drives.
- Started adding support for tape changers that use the "MCHangr"
bit rather than a separate ID or LUN.
- Increased limits so we could deal with LARGE tape libraries.
- Started adding support for barcode readers in said tape libraries
- broke first, last, next, previous. Sorry :-(.
- Added ability to chain commands on command line. Thus could say 'mtx -f
/dev/sg4 unload 4 0 load 7 0' to unload a tape from drive 0 and load the
tape in slot 7 into drive 0.
