.. _Build-Factories:
Build Factories
===============
Each Builder is equipped with a ``build factory``, which is defines the steps
used to perform that particular type of build. This factory is created in the
configuration file, and attached to a Builder through the ``factory`` element
of its dictionary.
The steps used by these builds are defined in the next section, :ref:`Build-Steps`.
.. note::
Build factories are used with builders, and are not added directly to the
buildmaster configuration dictionary.
.. _BuildFactory:
.. index:: Build Factory
Defining a Build Factory
------------------------
A :class:`BuildFactory` defines the steps that every build will follow. Think of it as
a glorified script. For example, a build factory which consists of a CVS checkout
followed by a ``make build`` would be configured as follows::
from buildbot.steps import svn, shell
from buildbot.process import factory
f = factory.BuildFactory()
f.addStep(svn.SVN(svnurl="http://..", mode="incremental"))
f.addStep(shell.Compile(command=["make", "build"]))
This factory would then be attached to one builder (or several, if desired)::
c['builders'].append(
BuilderConfig(name='quick', slavenames=['bot1', 'bot2'], factory=f))
It is also possible to pass a list of steps into the
:class:`BuildFactory` when it is created. Using :meth:`addStep` is
usually simpler, but there are cases where is is more convenient to
create the list of steps ahead of time, perhaps using some Python
tricks to generate the steps. ::
from buildbot.steps import source, shell
from buildbot.process import factory
all_steps = [
source.CVS(cvsroot=CVSROOT, cvsmodule="project", mode="update"),
shell.Compile(command=["make", "build"]),
]
f = factory.BuildFactory(all_steps)
Finally, you can also add a sequence of steps all at once::
f.addSteps(all_steps)
Attributes
~~~~~~~~~~
The following attributes can be set on a build factory after it is created, e.g., ::
f = factory.BuildFactory()
f.useProgress = False
:attr:`useProgress`
(defaults to ``True``): if ``True``, the buildmaster keeps track of how long
each step takes, so it can provide estimates of how long future builds
will take. If builds are not expected to take a consistent amount of
time (such as incremental builds in which a random set of files are
recompiled or tested each time), this should be set to ``False`` to
inhibit progress-tracking.
:attr:`workdir`
(defaults to 'build'): workdir given to every build step created by
this factory as default. The workdir can be overridden in a build step
definition.
If this attribute is set to a string, that string will be used for
constructing the workdir (buildslave base + builder builddir + workdir).
The attribute can also be a Python callable, for more complex cases, as
described in :ref:`Factory-Workdir-Functions`.
Predefined Build Factories
--------------------------
Buildbot includes a few predefined build factories that perform common build
sequences. In practice, these are rarely used, as every site has slightly
different requirements, but the source for these factories may provide examples
for implementation of those requirements.
.. _GNUAutoconf:
.. index::
GNUAutoconf
Build Factory; GNUAutoconf
GNUAutoconf
~~~~~~~~~~~
.. py:class:: buildbot.process.factory.GNUAutoconf
`GNU Autoconf <http://www.gnu.org/software/autoconf/>`_ is a
software portability tool, intended to make it possible to write
programs in C (and other languages) which will run on a variety of
UNIX-like systems. Most GNU software is built using autoconf. It is
frequently used in combination with GNU automake. These tools both
encourage a build process which usually looks like this:
.. code-block:: bash
% CONFIG_ENV=foo ./configure --with-flags
% make all
% make check
# make install
(except of course the Buildbot always skips the ``make install``
part).
The Buildbot's :class:`buildbot.process.factory.GNUAutoconf` factory is
designed to build projects which use GNU autoconf and/or automake. The
configuration environment variables, the configure flags, and command
lines used for the compile and test are all configurable, in general
the default values will be suitable.
Example::
f = factory.GNUAutoconf(source=source.SVN(svnurl=URL, mode="copy"),
flags=["--disable-nls"])
Required Arguments:
``source``
This argument must be a step specification tuple that provides a
BuildStep to generate the source tree.
Optional Arguments:
``configure``
The command used to configure the tree. Defaults to
:command:`./configure`. Accepts either a string or a list of shell argv
elements.
``configureEnv``
The environment used for the initial configuration step. This accepts
a dictionary which will be merged into the buildslave's normal
environment. This is commonly used to provide things like
``CFLAGS="-O2 -g"`` (to turn off debug symbols during the compile).
Defaults to an empty dictionary.
``configureFlags``
A list of flags to be appended to the argument list of the configure
command. This is commonly used to enable or disable specific features
of the autoconf-controlled package, like ``["--without-x"]`` to
disable windowing support. Defaults to an empty list.
``compile``
this is a shell command or list of argv values which is used to
actually compile the tree. It defaults to ``make all``. If set to
``None``, the compile step is skipped.
``test``
this is a shell command or list of argv values which is used to run
the tree's self-tests. It defaults to @code{make check}. If set to
None, the test step is skipped.
.. _BasicBuildFactory:
.. index::
BasicBuildFactory
Build Factory; BasicBuildFactory
BasicBuildFactory
~~~~~~~~~~~~~~~~~
.. py:class:: buildbot.process.factory.BasicBuildFactory
This is a subclass of :class:`GNUAutoconf` which assumes the source is in CVS,
and uses ``mode='clobber'`` to always build from a clean working copy.
.. _BasicSVN:
.. index::
BasicSVN
Build Factory; BasicSVN
BasicSVN
~~~~~~~~
.. py:class:: buildbot.process.factory.BasicSVN
This class is similar to :class:`BasicBuildFactory`, but uses SVN instead of CVS.
.. _QuickBuildFactory:
.. index::
QuickBuildFactory
Build Factory; QuickBuildFactory
QuickBuildFactory
~~~~~~~~~~~~~~~~~
.. py:class:: buildbot.process.factory.QuickBuildFactory
The :class:`QuickBuildFactory` class is a subclass of :class:`GNUAutoconf` which
assumes the source is in CVS, and uses ``mode='update'`` to get incremental
updates.
The difference between a `full build` and a `quick build` is that
quick builds are generally done incrementally, starting with the tree
where the previous build was performed. That simply means that the
source-checkout step should be given a ``mode='update'`` flag, to
do the source update in-place.
In addition to that, this class sets the :attr:`useProgress` flag to ``False``.
Incremental builds will (or at least the ought to) compile as few files as
necessary, so they will take an unpredictable amount of time to run. Therefore
it would be misleading to claim to predict how long the build will take.
This class is probably not of use to new projects.
.. _Factory-CPAN:
.. index::
CPAN
Build Factory; CPAN
CPAN
~~~~
.. py:class:: buildbot.process.factory.CPAN
Most Perl modules available from the `CPAN <http://www.cpan.org/>`_
archive use the ``MakeMaker`` module to provide configuration,
build, and test services. The standard build routine for these modules
looks like:
.. code-block:: bash
% perl Makefile.PL
% make
% make test
# make install
(except again Buildbot skips the install step)
Buildbot provides a :class:`CPAN` factory to compile and test these
projects.
Arguments:
``source``
(required): A step specification tuple, like that used by :class:`GNUAutoconf`.
``perl``
A string which specifies the :command:`perl` executable to use. Defaults
to just :command:`perl`.
.. _Distutils:
.. index::
Distutils,
Build Factory; Distutils
Distutils
~~~~~~~~~
.. py:class:: buildbot.process.factory.Distutils
Most Python modules use the ``distutils`` package to provide
configuration and build services. The standard build process looks
like:
.. code-block:: bash
% python ./setup.py build
% python ./setup.py install
Unfortunately, although Python provides a standard unit-test framework
named ``unittest``, to the best of my knowledge ``distutils``
does not provide a standardized target to run such unit tests. (Please
let me know if I'm wrong, and I will update this factory.)
The :class:`Distutils` factory provides support for running the build
part of this process. It accepts the same ``source=`` parameter as
the other build factories.
Arguments:
``source``
(required): A step specification tuple, like that used by :class:`GNUAutoconf`.
``python``
A string which specifies the :command:`python` executable to use. Defaults
to just :command:`python`.
``test``
Provides a shell command which runs unit tests. This accepts either a
string or a list. The default value is ``None``, which disables the test
step (since there is no common default command to run unit tests in
distutils modules).
.. _Trial:
.. index::
Trial
Build Factory; Trial
Trial
~~~~~
.. py:class:: buildbot.process.factory.Trial
Twisted provides a unit test tool named :command:`trial` which provides a
few improvements over Python's built-in :mod:`unittest` module. Many
python projects which use Twisted for their networking or application
services also use trial for their unit tests. These modules are
usually built and tested with something like the following:
.. code-block:: bash
% python ./setup.py build
% PYTHONPATH=build/lib.linux-i686-2.3 trial -v PROJECTNAME.test
% python ./setup.py install
Unfortunately, the :file:`build/lib` directory into which the
built/copied ``.py`` files are placed is actually architecture-dependent,
and I do not yet know of a simple way to calculate its value. For many
projects it is sufficient to import their libraries `in place` from
the tree's base directory (``PYTHONPATH=.``).
In addition, the :samp:`{PROJECTNAME}` value where the test files are
located is project-dependent: it is usually just the project's
top-level library directory, as common practice suggests the unit test
files are put in the :mod:`test` sub-module. This value cannot be
guessed, the :class:`Trial` class must be told where to find the test
files.
The :class:`Trial` class provides support for building and testing
projects which use distutils and trial. If the test module name is
specified, trial will be invoked. The library path used for testing
can also be set.
One advantage of trial is that the Buildbot happens to know how to
parse trial output, letting it identify which tests passed and which
ones failed. The Buildbot can then provide fine-grained reports about
how many tests have failed, when individual tests fail when they had
been passing previously, etc.
Another feature of trial is that you can give it a series of source
``.py`` files, and it will search them for special ``test-case-name``
tags that indicate which test cases provide coverage for that file.
Trial can then run just the appropriate tests. This is useful for
quick builds, where you want to only run the test cases that cover the
changed functionality.
Arguments:
``testpath``
Provides a directory to add to :envvar:`PYTHONPATH` when running the unit
tests, if tests are being run. Defaults to ``.`` to include the
project files in-place. The generated build library is frequently
architecture-dependent, but may simply be :file:`build/lib` for
pure-python modules.
``python``
which python executable to use. This list will form the start of
the `argv` array that will launch trial. If you use this,
you should set ``trial`` to an explicit path (like
:file:`/usr/bin/trial` or :file:`./bin/trial`). The parameter defaults
to ``None``, which
leaves it out entirely (running ``trial args`` instead of
``python ./bin/trial args``). Likely values are ``['python']``,
``['python2.2']``, or ``['python', '-Wall']``.
``trial``
provides the name of the :command:`trial` command. It is occasionally
useful to use an alternate executable, such as :command:`trial2.2` which
might run the tests under an older version of Python. Defaults to
:command:`trial`.
``trialMode``
a list of arguments to pass to trial, specifically to set the reporting mode.
This defaults to ``['--reporter=bwverbose']``, which only works for
Twisted-2.1.0 and later.
``trialArgs``
a list of arguments to pass to trial, available to turn on any extra flags you
like. Defaults to ``[]``.
``tests``
Provides a module name or names which contain the unit tests for this
project. Accepts a string, typically :samp:`{PROJECTNAME}.test`, or a
list of strings. Defaults to ``None``, indicating that no tests should be
run. You must either set this or ``testChanges``.
``testChanges``
if ``True``, ignore the ``tests`` parameter and instead ask the Build for all
the files that make up the Changes going into this build. Pass these filenames
to trial and ask it to look for test-case-name tags, running just the tests
necessary to cover the changes.
``recurse``
If ``True``, tells Trial (with the ``--recurse`` argument) to look in all
subdirectories for additional test cases.
``reactor``
which reactor to use, like 'gtk' or 'java'. If not provided, the Twisted's
usual platform-dependent default is used.
``randomly``
If ``True``, tells Trial (with the ``--random=0`` argument) to
run the test cases in random order, which sometimes catches subtle
inter-test dependency bugs. Defaults to ``False``.
The step can also take any of the :class:`ShellCommand` arguments, e.g.,
:attr:`haltOnFailure`.
Unless one of ``tests`` or ``testChanges`` are set, the step will
generate an exception.
