NEWS for OpenCT -- History of user visible changes
New in 0.6.20; 2010-02-16; Andreas Jellinghaus
* Modify Rutoken S binary interfaces by Aktiv Co.
* Makefiles fixed in doc/ directory
New in 0.6.19; 2010-01-07; Andreas Jellinghaus
* update on udev rules. Please now use udev instead of hal,
as distributions are deprecating hal in favor for udev.
* Thanks to Daniel Kahn Gillmor for testing on debian.
New in 0.6.18; 2009-09-25; Andreas Jellinghaus
* USB code for BSD fixed by Emmanuel Dreyfus
* Add support for Rutoken S by Aktiv Co. / Aleksey Samsonov
New in 0.6.17; 2009-07-29; Andreas Jellinghaus
* add support for Rutoken ECP (ccid driver)
* small bugfixes
New in 0.6.16; 2009-05-04; Andreas Jellinghaus
* For ccid, etoken* drivers remove polling loop, review the force_poll
configuration option, this reduces power consumption and CPU load.
* Fix some issues caused by newer udev version.
* Handle T1 abort better.
* Some build system fixes.
* Some minor fixes.
* Re-add api documentation (pre-generated), like we used to.
New in 0.6.15; 2008-07-31; Andreas Jellinghaus
* Build system rewritten (NOTICE: configure options was modified).
* Build system rewritten (NOTICE: configure options was modified).
* None privileged configuration added, as a result /etc/openct.conf ifdhandler
was modified, please review sample at etc/openct.conf before upgrade.
* The usb device add (/dev/bus/usb/$env{BUSNUM}/$env{DEVNUM}) udev rule is now
available in separate file, as it should be available at most distributions,
and may conflict. Install this only if you are using old udev that miss this
statement.
* Basic coldplug support on Linux is available without libusb dependency.
* CCID-1.10 is now supported.
New in 0.6.14; 2007-08-30; Andreas Jellinghaus
* further fixes to udev script by Kay Sievers
New in 0.6.13; 2007-08-23; Andreas Jellinghaus
* get hal setup to work
* more fixes to udev setup. works now without usbfs.
* fix openct.udev.modalias rule file for openct. tested, now working fine.
* this version works with linux kernel 2.6.22+ if patched, see
http://lkml.org/lkml/2007/8/17/193 for a patch.
will be fixed in 2.6.22.6 I hope.
* improve etc/openct_usb.in script for working without PRODUCT environment
* comment out wbeiuu driver - use kernel driver plus phoenix driver instead
New in 0.6.12; 2007-07-11; Andreas Jellinghaus
* add alternative udev rules based on MODALIAS.
* update wiki export (fix links, add images).
* remove TEST_MINUS_S_SH tests from configure (not needed).
* make lots of functions static (warnings from sparse).
* rename variables clashing with function names such as index.
* fix DragonFly BSD build.
* add small delays to smph driver, suggested by Alexej Wassiljew.
* fix pcsclite compile issue (Ludovic Rousseau).
* add ccid as fallback driver if no other is found (linux only, FIXME others).
* add more drivers to etc/ files, get them in sync.
* fix lots of warnings/issues found by sparse.
* add patch by harald welte for contactless reader support (librfid).
* add set_params to pcmcia and pcmcia-block code to
get cm4000/cm4040 drivers to work again.
New in 0.6.11; 2006-11-22; Andreas Jellinghaus
* add usb reset for non-linux too (dummy code only).
* fix three small bugs/warnings
New in 0.6.10; 2006-11-11; Andreas Jellinghaus
* fix etc/Makefile installation (Ville Skytta)
* bsd compile fixed (Markus Schatzl)
* include string.h in utils.c (Dann Frazier)
* fix 'BUS="pcmcia"' match in udev rules file.
* improve egate reset logic (Chaskiel Grundman, bugs by AJ)
* implement usb reset (Andrey Jivsov)
New in 0.6.9; 2006-09-20; Andreas Jellinghaus
* more work on wbeiuu driver.
* better handling of usb devices for openbsd.
* small delays in egate initialisation for new sealed egate token.
* small bugfix in socket code.
* fix openct.conf for wbeeui driver.
* move scripts used by udev to /lib/udev/ by default.
* udev scripts for usb, pcmcia_block and serial readers.
* add several usb ids to ccid driver config.
* small fix in ccid driver with configuration 0.
* don't claim interface in device_open, instead make sure all drivers
call ifd_device_set_parameters which will (in the case of usb) claim
the interface.
* cleanup the parameters to ifdhandler and openct-control attach.
include type of the device in these parameters. do not drop the
type if already known. this change requires the updated hotplug files.
New in 0.6.8; 2006-06-19; Andreas Jellinghaus
Fix bug in socket code: retry if read() returns -1/EINTR.
New in 0.6.7; 2006-05-01; Andreas Jellinghaus
* configure.ac uses now pkg-config.
* sys-linux.c does not need kernel headers (all data etc. included)
* now generating a Changelog file in the documentation
* all urls now based on http://www.opensc-project.org/
* wiki documentation included as html snapshot
* new driver for WB Electronics' Infinity USB Unlimited by Juan Carlos Borras
* bug in sleep code fixed.
* new pertosmart ac1038 driver by Carlos Henrique Bauer
* new smartkey driver: not finished yet
* support for both /proc/bus/usb and /dev/bus/usb devices with linux
* improved T=1 implementation by Ludovic Rousseau
* improved eutron driver by Chaskiel Grundman
* OPENCT_SOCKETDIR environment can point to any dir for the sockets so
users can use it without being root.
* sample config files for both hald and udev.
we suggest udev as hotplug replacement. hald is not tested.
* sample reader.conf included for pcsc-lite.
remember to use opensc->openct or opensc->pcsc->openct but not both.
* add phoenix/smartmouse driver by Antoine Nguyen
based on sctk by Alexandre Becoulet
* License is now officialy LGPL. So far it was BSD/LGPL
dual licensed, and most parts still are, but we already
had some usb code under LGPL and now got another driver
under LGPL, so the project as whole is considered LGPL.
Libopenct is still 100% BSD, in case you want to use it.
so this only affects the ifdhandler process and other tools.
* Siemens B1 driver improved by Lorenz Knauer.
New in 0.6.6; 2005-09-11 Andreas Jellinghaus
* updated html documentation. now generated with "make dist".
* indent'ed with linux kernel Lindet script.
* use libltdl instead of scdl.
* new ident schema: Lident (from linux kernel)
* new etoken64 driver (completely untested.
not supported by opensc.)
* new pertosmart driver by Carlos Henrique Bauer
* new acr30u driver by Laurent Pinchart
* initial driver documentation by Laurent Pinchart
* ccid driver now supports pcmcia block based devices
such as the OMNIKEY CardMan 4040 (Harald Welte)
New in 0.6.5; 2005-05-16; Andreas Jellinghaus
* add pcmcia subsystem (Harald Welte)
* add cm4000 driver (Harald Welte)
* improve ccid driver (Harald Welte)
* sunray support (William Wanders)
* updated solaris support (William Wanders)
* silience some aclocal warning (Ville Skytta)
* man page for openct-tool (Ville Skytta)
* print usage to stdout if there is no error (Ville Skytta)
* document ifdhandler "-i" option (Ville Skytta)
* gempc configuration example (Ville Skytta)
* first claim usb interface, then configure it.
* replace xml/html documentation with a wiki snapshot.
New in 0.6.4; 2005-04-25; Andreas Jellinghaus:
* solaris/ directory with files for building openct on solaris
* improved usb code for bsd
* improved usb code for solaris
* require automake 1.5
* on darwin link with -Wl,-framework,CoreFoundation
* configure code cleanup (use AC_HELP_STRING etc.)
* implement protocol selection, improved command checking
* ccid update with some cleanups.
* improved t=1 protocoll code.
* improved and fixed remote socket code.
* increased library version to 1.0.0 (incompatible with 0.*.* versions)
* fix libtool issue on mac os X (thanks to ville skytta)
New in 0.6.3; 2005-01-11; Andreas Jellinghaus
* silence "unable to open" and "Debug: connect() failed:" error messages,
as they can happen in normal operation (e.g. opensc compiled with openct
support (but openct not used), or probing for readers to see if there is
one).
* add version option to all command line tools.
New in 0.6.2; 2004-10-31; Andreas Jellinghaus
* Small fix in hotplug script.
* Increased transfer buffer to 258 bytes for e-gate.
* Improved error handling in e-gate driver.
* Updated Info.plist files.
* Small fix in atr.c that returned an error for legal atrs.
* Improvements to the kaan driver.
New in 0.6.1; 2004-07-18; Andreas Jellinghaus
* This is a test version of alpha code quality
There are several known problems with it, please
use the older 0.5.0 release in production environments
* new driver for generic usb smart card readers (ccid)
* new proxy mechanism for remote access
* small fix in ct_buf_put function, new ct_buf_push function
* improved ct-api interface code
* support for solaris
* improved t=1 protocol
New in 0.5.0; 2003-11-24; Antti Tapaninen:
* Initial support for synchronous ICCs
* Improved support for egate, kaan and towitoko drivers
* Initial support for Siemens B1 (DTAG/T-TeleSec),
iKey 2032, Cherry Smartboard and GemPC readers
* A new CT-API implementation by Michael Haardt
* A new PC/SC IFD module implementation based on
work by Carlos Prados
* USB/serial layer cleanups. USB support for other than
Linux is under development, volunteers welcome
* Lots of generic build and portability fixes. Now works
with native compilers for several OS's including Linux,
*BSD, MacOS X, Solaris, Tru64 and AIX
* Some OpenCT client API resource leaks fixed
* Documentation improvements
New in 0.1.0; 2003-08-15; Olaf Kirch:
* Initial release
