# Load additional ip6tables modules (nat helpers)
#   Default: -none-
# Space separated list of nat helpers (e.g. 'ip_nat_ftp ip_nat_irc'), which
# are loaded after the firewall rules are applied. Options for the helpers are
# stored in /etc/modprobe.conf.
IP6TABLES_MODULES=""

# Unload modules on restart and stop
#   Value: yes|no,  default: yes
# This option has to be 'yes' to get to a sane state for a firewall
# restart or stop. Only set to 'no' if there are problems unloading netfilter
# modules.
IP6TABLES_MODULES_UNLOAD="yes"

# Save current firewall rules on stop.
#   Value: yes|no,  default: no
# Saves all firewall rules to /etc/sysconfig/ip6tables if firewall gets stopped
# (e.g. on system shutdown).
IP6TABLES_SAVE_ON_STOP="no"

# Save current firewall rules on restart.
#   Value: yes|no,  default: no
# Saves all firewall rules to /etc/sysconfig/ip6tables if firewall gets
# restarted.
IP6TABLES_SAVE_ON_RESTART="no"

# Save (and restore) rule and chain counter.
#   Value: yes|no,  default: no
# Save counters for rules and chains to /etc/sysconfig/ip6tables if
# 'service ip6tables save' is called or on stop or restart if SAVE_ON_STOP or
# SAVE_ON_RESTART is enabled.
IP6TABLES_SAVE_COUNTER="no"

# Numeric status output
#   Value: yes|no,  default: yes
# Print IP addresses and port numbers in numeric format in the status output.
IP6TABLES_STATUS_NUMERIC="yes"

# Verbose status output
#   Value: yes|no,  default: yes
# Print info about the number of packets and bytes plus the "input-" and
# "outputdevice" in the status output.
IP6TABLES_STATUS_VERBOSE="no"

# Status output with numbered lines
#   Value: yes|no,  default: yes
# Print a counter/number for every rule in the status output.
IP6TABLES_STATUS_LINENUMBERS="yes"