- Tue Oct 9 2012 Jeffrey Ollie <jeff@ocjtech.us> - 1.4.13-1
- The Asterisk Development Team has announced the release of libpri 1.4.13.
- This release is available for immediate download at
- http://downloads.asterisk.org/pub/telephony/libpri
-
- The release of libpri 1.4.13 resolves several issues reported by the
- community and would have not been possible without your participation.
- Thank you!
-
- The following are the issues resolved in this release:
-
- * --- Outgoing BRI calls fail when using Asterisk 1.8 with HA8, HB8,
- and B410P cards.
- (Issue AST-598. Reported by Trey Blancher)
-
- * --- Implement handling a multi-channel RESTART request.
- (Closes issue PRI-93. Reported by Marcin Kowalczyk)
-
- * --- Removed MDL/TEI management configuration warning message.
- (Closes issue PRI-137. Reported by Bart Coninckx)
-
- * --- Allow passing compiler flags (CFLAGS, LDFLAGS)
- (Closes issue PRI-144. Reported by Tzafrir Cohen)
-
- For a full list of changes in this release, please see the ChangeLog:
-
- http://downloads.asterisk.org/pub/telephony/libpri/ChangeLog-1.4.13 - Thu Jul 19 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.4.12-3
- Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild
- Fri Jan 13 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.4.12-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_17_Mass_Rebuild
- Wed Jul 6 2011 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.4.12-1
- The Asterisk Development Team announces the release of libpri version
- 1.4.12. This release is available for immediate download at
- http://downloads.asterisk.org/pub/telephony/libpri/
-
- The following are some of the issues resolved in this release:
-
- * Add call transfer exchange of subaddresses support and fix PTMP call
- transfer signaling.
-
- * Invalid PTMP redirecting signaling as TE towards NT.
-
- * Add Q931_IE_TIME_DATE to CONNECT message when in network mode.
- (issue #18047 (JIRA PRI-114). Reported by: wuwu. Patched by rmudgett)
-
- * Swap of master/slave in pri_enslave() incorrect.
- (issue #18769 (JIRA PRI-120). Reported by: jcollie. Patched by jcollie)
-
- * Fix I-frame retransmission quirks.
-
- * Crash if NFAS swaps D channels on a call with an active timer.
-
- * DMS-100 not receiving caller name anymore.
- (issue #18822 (JIRA PRI-121). Reported by: cmorford. Patched by rmudgett)
-
- * B channel lost by incoming call in BRI NT PTMP mode.
-
- * Implement the mandatory T312 timer for NT PTMP broadcast SETUP calls.
-
- This release contains several new features, among them:
-
- 1.) ETSI and Q.SIG Call Completion Supplementary Service (CCSS) support
- 2.) ETSI Advice Of Charge (AOC) support
- 3.) ETSI Explicit Call Transfer (ECT) support
- 4.) ETSI Call Waiting support for ISDN phones
- 5.) ETSI Malicious Call ID support
- 6.) Add Display IE text handling options.
-
- For a full list of changes in this release, please see the ChangeLog:
-
- http://downloads.asterisk.org/pub/telephony/libpri/releases/ChangeLog-1.4.12 - Tue Feb 8 2011 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.4.12-0.3.beta3
-
- The following are some of the issues resolved in this beta release:
-
- * Prevent a CONNECT message from sending a CONNECT ACKNOWLEDGE in the
- wrong state.
- (issue #17360. Reported by: shawkris. Patched by rmudgett)
-
- * Made Q.921 delay events to Q.931 if the event could immediately
- generate response frames.
- (closes issue #17360. Reported by: shawkris. Patched by rmudgett)
-
- * BRI PTMP: Active channels not cleared when the interface goes down.
- (closes issue #17865. Reported by: wimpy. Patched by rmudgett)
-
- * Segfault in pri_schedule_del() - ctrl value is invalid.
- (closes issue #17522)
- (closes issue #18032. Reported by: schmoozecom. Patched by rmudgett)
-
- * Crash when receiving an unknown/unsupported message type.
- (closes issue #17968. Reported by: gelo. Patched by rmudgett)
-
- * B410P gets incoming call packets on ISDN but Asterisk doesn't see the
- call.
- (closes issue #18232. Reported by: lelio. Patched by rmudgett)
-
- * SABME flood on backup D-channel in NFAS configuration.
- (closes issue #18255. Reported by: bklang. Patched by rmudgett)
-
- * Asterisk is getting a "No D-channels available!" warning message every
- 4 seconds.
- (closes issue #17270. Reported by: jmls. Patched by rmudgett)
-
- This beta release contains several new features, among them:
-
- 1.) ETSI and Q.SIG Call Completion Supplementary Service (CCSS) support
- 2.) ETSI Advice Of Charge (AOC) support
- 3.) ETSI Explicit Call Transfer (ECT) support
- 4.) ETSI Call Waiting support for ISDN phones
- 5.) ETSI Malicious Call ID support
-
- For a full list of changes in the current release candidate, please see
- the ChangeLog:
-
- http://downloads.asterisk.org/pub/telephony/libpri/releases/ChangeLog-1.4.12-beta3 - Tue Feb 8 2011 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.4.12-0.2.beta2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_15_Mass_Rebuild
- Fri Oct 8 2010 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.4.12-0.2.beta2
- The following are some of the issues resolved in this beta release:
-
- * Fix issue where calling name is not successfully processed on inbound
- QSIG PRI calls from Mitel PBX.
- (Closes issue #17619. Reported by: jims8650. Patched by rmudgett)
-
- * Added missing code specified by Q.921 (Figure B.8 Page 85) when receive
- RNR in "Timer Recovery" state.
- (Closes issue #16791. Reported by: alecdavis. Patched by alecdavis)
-
- * Fixed issue where incoming calls specifying the channel using a slot
- map could not negotiate a B channel correctly.
-
- * Add support to receive ECMA-164 2nd edition OID name ROSE messages.
-
- * Fixed issue where ISDN BRI PTMP TE does not recover from line faults.
- (Closes issue #17570. Reported by: jcovert. Patched by rmudgett)
-
- * Q.921 improvements from comparing Q.921 SDL diagrams with implementation.
-
- * Q.921/Q.931 message debug output improvements.
-
- This beta release contains several new features, among them:
-
- 1.) ETSI and Q.SIG Call Completion Supplementary Service (CCSS) support
- 2.) ETSI Advice Of Charge (AOC) support
- 3.) ETSI Explicit Call Transfer (ECT) support
- 4.) ETSI Call Waiting support for ISDN phones
- 5.) ETSI Malicious Call ID support
-
- For a full list of changes in the current release candidate, please see
- the ChangeLog:
-
- http://downloads.asterisk.org/pub/telephony/libpri/releases/ChangeLog-1.4.12-beta2 - Mon Aug 2 2010 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.4.12-0.1.beta1
- 1.4.12-beta1
-
- This beta release contains some fixes and several new features, among them:
-
- 1.) ETSI and Q.SIG Call Completion Supplementary Service (CCSS) support
-
- 2.) ETSI Advice Of Charge (AOC) support
-
- 3.) ETSI Explicit Call Transfer (ECT) support
-
- 4.) ETSI Call Waiting support for ISDN phones
-
- 5.) ETSI Malicious Call ID support
-
- For a full list of changes in the current release candidate, please see
- the ChangeLog:
-
- http://downloads.asterisk.org/pub/telephony/libpri/releases/ChangeLog-1.4.12-beta1 - Mon Aug 2 2010 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.4.11.3-1
- 1.4.11.3:
- This release fixes a regression in the calling number assignment logic:
-
- * Calling Number assignment logic change in libpri 1.4.11. Restored the old
- behaviour if there is more than one calling number in the incoming SETUP
- message. A network provided number is reported as ANI.
- (Closes issue #17495. Reported and tested by ibercom. Patched by rmudgett)
-
- For a full list of changes in the current release, please see the ChangeLog:
-
- http://downloads.asterisk.org/pub/telephony/libpri/releases/ChangeLog-1.4.11.3 - Thu Jun 10 2010 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.4.11.2-1
- 1.4.11.2:
-
- This release fixes situation where Q.SIG calling name in FACILITY
- message was not reported to the upper layer:
-
- * pri_facility.c: Q.SIG calling name in FACILITY message not reported
- to the upper layer. Q.SIG can send the CallingName, CalledName, and
- ConnectedName in stand alone FACILITY messages. If the CallingName
- was not sent in the SETUP message, the caller id name was not
- reported to the upper layer. (Closes issue #17458. Reported, tested
- by: jsmith. Patched by rmudgett)
-
- For a full list of changes in the current release, please see the
- ChangeLog:
-
- http://downloads.asterisk.org/pub/telephony/libpri/releases/ChangeLog-1.4.11.2
-
- 1.4.11.1:
-
- This release fixes a regression in multi component FACILITY messages
- and includes a minor bug fix for BRI spans:
-
- * Multi component FACILITY messages only process the first
- component. The code was only processing the first ROSE component in
- the facility message. (Closes issue #17428. Reported, tested by:
- patrol-cz. Patched by rmudgett)
-
- * Inband disconnect setting does nothing on BRI spans. The
- acceptinbanddisconnect flag is not inherited when creating a new TEI
- and thus rendering the setting (and its respective equivalent in
- Asterisk) a no-op on BRI setups. (Closes issue #15265. Reported,
- patched, tested by: paravoid)
-
- For a full list of changes in the current release, please see the
- ChangeLog:
-
- http://downloads.asterisk.org/pub/telephony/libpri/releases/ChangeLog-1.4.11.1 - Wed May 26 2010 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.4.11-1
- This release contains many fixes and new features, among them being:
-
- 1.) Support for NT-PTMP BRI links, including support for multiple TEIs
- and connecting of BRI phones.
-
- 2.) Support for allowing persistent Q.921 drops on both NT and TE PTMP
- links, as well as automatically requesting that Q.921 data links
- reactivate when needed by Q.931.
-
- 3.) T309 is enabled by default.
-
- 4.) Problems with Keypad Facility Digits were addressed.
-
- 5.) A number of additional service related features were added:
- Connected Line Information, HOLD/RELEASE support, Call Deflection/Call
- Rerouting, as well as partial subaddress support. They are supported in
- the Q.SIG and EuroISDN switch types, and most currently require using
- the trunk version of Asterisk.
-
- 6.) Many potential and realized Q.921 related problems, particularly
- during retransmissions and other scenarios involving medium to high
- packet loss.
-
- For a full list of changes in the current release candidates, please see
- the ChangeLog:
-
- http://downloads.asterisk.org/pub/telephony/libpri/releases/ChangeLog-1.4.11 - Tue Oct 20 2009 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.4.10.2-1
- Update to libpri 1.4.10.2
- Sat Jul 25 2009 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.4.10-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_12_Mass_Rebuild
- Fri Apr 24 2009 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.4.10-1
- Update to 1.4.10
- Wed Feb 25 2009 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.4.7-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_11_Mass_Rebuild
- Tue Aug 5 2008 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.4.7-1
- Update to 1.4.7
- Tue Jul 29 2008 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.4.6-1
- Update to 1.4.6
- Mon Feb 11 2008 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.4.3-2
- Rebuild for GCC 4.3
- Thu Dec 20 2007 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.4.3-1
- Update to 1.4.3.
- Drop upstreamed patch. - Thu Nov 1 2007 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.4.2-1
- Update to 1.4.2
- Wed Aug 29 2007 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.4.1-5
- Bump release.
- Wed Aug 29 2007 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.4.1-4
- Add patch to define size_t
- Wed Aug 29 2007 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.4.1-3
- Update license tag.
- Update URL. - Wed Aug 29 2007 Fedora Release Engineering <rel-eng at fedoraproject dot org> - 1.4.1-2
- Rebuild for selinux ppc32 issue.
- Mon Jul 9 2007 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.4.1-1
- Update to 1.4.1
- Sat Dec 23 2006 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.4.0-3
- Update to 1.4.0 final
- Sat Oct 14 2006 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.4.0-2.beta1
- Fix lib paths for 64 bit systems.
- Sat Oct 14 2006 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.4.0-1.beta1
- Get rid of pesky "." in -devel summary.
- Remove zaptel-devel BR - Fri Oct 13 2006 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.4.0-1.beta1
- devel package needs to Require: main package
- Fri Oct 13 2006 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.4.0-0.beta1
- Update to 1.4.0-beta1
- Fri Jun 2 2006 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.2.3
- Update to 1.2.3
- Add dist tag to release
- Update source URL - Wed Jan 18 2006 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.2.2-1
- Update to 1.2.2.
- Fix the spelling of Paul Komkoff Jr.'s name. - Fri Jan 13 2006 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.2.1-4
- Eliminate the libpri-install.patch and other improvements based on suggestions from Paul Komkoff Jr.
- Thu Jan 12 2006 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.2.1-3
- Fix building on 64 bit systems.
- Thu Jan 12 2006 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.2.1-2
- Changed buildroot to meet FE packaging guidelines
- Don't forget docs
- Modify %post so that ldconfig dep will be picked up automatically
- Add %postun so that ldconfig gets run on uninstall
- Don't package the static library
- Changed $RPM_BUILD_ROOT to %{buildroot} (yes, I know I was consistent before, but I prefer %{buildroot}) - Wed Jan 11 2006 Jeffrey C. Ollie <jeff@ocjtech.us> - 1.2.1-1
- First version for Fedora Extras
