title: Checks temperature,humidity,wetness on sensatronic em1 devices agents: snmp author: Lars Michelsen <lm@mathias-kettner.de> license: GPL distribution: description: This check monitors the data gathered by the sensors sensors attached to a Sensatronic EM1 device. The device needs to support the {SENSATRONICS-EM1} MIB. item: Each sensor which returns a value different than -999.9 results in one service. The item containts the group name and the sensor type. perfdata: Depends on the sensor type. In case of temperature the service outputs a perfdata value {temperature} and the current value, warn, crit in the provided measure unit. In case of humidity the check returns a perfdata value {humindity} with the percentage value. inventory: All available sensors are automatically inventorized. examples: # set default levels for all sensors strem1_temp_defaultlevels = (28, 32) strem1_humidity_defaultlevels = (None, None) strem1_wetness_defaultlevels = (None, None) [parameters] warning (int): minimum value leading to a WARNING state critical (int): mimimum value leading to a CRITICAL state [configuration] strem1_temp_defaultlevels (int/None, int/None): default temperature levels for warning, critical states. Preset to (28, 32). None disables a threshold. strem1_humidity_defaultlevels (int/None, int/None): default humidity levels for warning, critical states. Preset to (28, 32). None disables a threshold. strem1_wetness_defaultlevels (int/None, int/None): default wetness levels for warning, critical states. Preset to (28, 32). None disables a threshold.