# Network UPS Tools: example upsd configuration file # # This file contains access control data, you should keep it secure. # # It should only be readable by the user that upsd becomes. See the FAQ. # # Each entry below provides usage and default value. # ======================================================================= # MAXAGE <seconds> # MAXAGE 15 # # This defaults to 15 seconds. After a UPS driver has stopped updating # the data for this many seconds, upsd marks it stale and stops making # that information available to clients. After all, the only thing worse # than no data is bad data. # # You should only use this if your driver has difficulties keeping # the data fresh within the normal 15 second interval. Watch the syslog # for notifications from upsd about staleness. # ======================================================================= # STATEPATH <path> # STATEPATH /var/run/nut # # Tell upsd to look for the driver state sockets in 'path' rather # than the default that was compiled into the program. # ======================================================================= # LISTEN <address> [<port>] # LISTEN 127.0.0.1 3493 # LISTEN ::1 3493 # # This defaults to the localhost listening addresses and port 3493. # In case of IP v4 or v6 disabled kernel, only the available one will be used. # # You may specify each interface you want upsd to listen on for connections, # optionally with a port number. # # You may need this if you have multiple interfaces on your machine and # you don't want upsd to listen to all interfaces (for instance on a # firewall, you may not want to listen to the external interface). # # This will only be read at startup of upsd. If you make changes here, # you'll need to restart upsd, reload will have no effect. # ======================================================================= # MAXCONN <connections> # MAXCONN 1024 # # This defaults to maximum number allowed on your system. Each UPS, each # LISTEN address and each client count as one connection. If the server # runs out of connections, it will no longer accept new incoming client # connections. Only set this if you know exactly what you're doing. # ======================================================================= # CERTFILE <certificate file> # # When compiled with SSL support, you can enter the certificate file here. # The certificates must be in PEM format and must be sorted starting with # the subject's certificate (server certificate), followed by intermediate # CA certificates (if applicable_ and the highest level (root) CA. It should # end with the server key. See 'docs/security.txt' or the Security chapter of # NUT user manual for more information on the SSL support in NUT.
