-------------------------- HepMC-2.06.09 --------------------------
2012-06-05 Lynn Garren
* configure.ac: explicitly disallow using configure with VC++
* INSTALL*: improve build instructions
-------------------------- HepMC-2.06.08 --------------------------
2012-02-16 Lynn Garren
* src/GenEventStreamIO.cc: make sure we check the stream units
if there is no unit line in the event header
* test/testHepMC.cc.in: verify unit behavior
2012-02-10 Lynn Garren
* cmake/Modules/HepMCVariables.cmake: deal with Windows
* HepMC/GenEvent.h: add define_units()
-------------------------- HepMC-2.06.07 --------------------------
2012-01-09 Lynn Garren
* remove all VCMakefile.in files
* Use cmake to build for Windows
* cmake is now the preferred build method
2012-01-05 Lynn Garren
* src/GenEvent.cc: fix a typo in error report for GenEvent::use_length_unit
* examples/pythia8: add main31 and main32 from pythia8
2012-01-05 Lynn Garren
* GenParticle.h, GenVertex.h, PdfInfo.h, SimpleVector.h, SimpleVector.icc:
Rename local variables to avoid shadowing class variables.
This problem surfaces when compiling with -Wshadow.
-------------------------- HepMC-2.06.06 --------------------------
2011-11-09 Lynn Garren
* add the ability to build with cmake
* defs.h is neither created nor installed when building with cmake
2011-11-01 Lynn Garren
* examples: move Pythia and Herwig examples to examples/fio
2011-10-31 Lynn Garren
* remove fio/PythiaWrapper.cc
* HepMC/PythiaWrapper.h: HepMC::GenCrossSection getPythiaCrossSection()
is now an inline method
2011-10-25 Lynn Garren
* fio/PythiaWrapper.cc: remove struct definitions
-------------------------- HepMC-2.06.05 --------------------------
2011-04-21 Lynn Garren
* HepMC/GenVertex.h: add #include <cstddef> for bug #80400
2011-04-15 Lynn Garren
* test/testFlow.cc, test/testPrintBug.cc: define units
* test/*.sh.in: make sure comparisons work for allowed
momentum and length combinations
-------------------------- HepMC-2.06.04 --------------------------
2011-01-04 Lynn Garren
* src/HeavyIon.cc, src/PdfInfo.cc: throw if there is an invalid line type
* test/testHepMC.cc.in, test/testStreamIO.cc.in, test/testHepMCVarious.input:
provoke a problem with HeavyIon (see bug #76527)
-------------------------- HepMC-2.06.03 --------------------------
2010-10-22 Lynn Garren
* test/testPolarization.cc: verify that Polarization is copied and written
2010-10-20 Lynn Garren
* src/GenParticle.cc: copy flow when using the copy constructor
* test/testFlow.cc: add check to be sure flow is copied
-------------------------- HepMC-2.06.02 --------------------------
2010-08-18 Lynn Garren
* src/GenEventStreamIO.cc, StreamHelpers.cc:
cleanup unassociated event remnants if corrupt data is found
2010-07-30 Lynn Garren & Andy Buckley
* src/GenEventStreamIO.cc: create GenCrossSection, PdfInfo, and HeavyIon
on the stack rather than the heap to fix a memory leak
-------------------------- HepMC-2.06.01 --------------------------
2010-06-01 Lynn Garren
* HepMC/GenRanges.h: remove ConstGenVertexParticleRange since
there is neither a GenVertex::particle_const_iterator nor a
GenVertex::vertex_const_iterator
* HepMC/GenVertex.h: remove unimplemented
ConstGenVertexParticleRange particles()
-------------------------- HepMC-2.06.00 --------------------------
-------------------------- HepMC-2.06.00.b02 --------------------------
2010-05-13 Lynn Garren
* HepMC/Version.h: version() now takes an optional output stream
* HepMC/GenEvent.h: add helper method for reading weight names
* src/GenEventStreamIO.cc: use new helper method to read weight names
* testHepMCVarious.input: change order of some event info lines
* test/testIOGenEvent.input: add named weights for testing
2010-05-12 Lynn Garren
* "make check" now works if momentum units are MEV
2010-05-11 Lynn Garren
* rename HepMC/GenEventIterators.h to HepMC/GenRanges.h
* src/GenEventStreamIO.cc: fix a bug reading unnamed (old style) weights
* test/testHepMC: add more weight testing
-------------------------- HepMC-2.06.00.b01 --------------------------
2010-04-05 Lynn Garren
* HepMC/StreamInfo.h: add reading_event_header flag for use by streaming input
* src/GenEventStreamIO.cc: Input no longer expects a fixed order of
header lines and will ignore lines that are not of a known type.
* HepMC/HerwigWrapper.h: add hwbeam
* rename PythiaWrapper6_2.h to PythiaWrapper6_4.h
Add structs for more common blocks.
2010-04-02 Lynn Garren
* HepMC/IteratorRange.h: put the enum in its own header
* HepMC/GenEvent.h: add vertex_range() and particle_range()
* HepMC/GenParticle.h: add particles_in(range) and particles_out(range)
* HepMC/GenVertex.h: add particles(range),
particles_in(GenParticle,range), and particles_out(GenParticle,range)
* test/testHepMCIteration.cc: use the new methods
2010-03-20 Lynn Garren
* HepMC/GenEventIterators.h: add ConstGenVertexParticleRange,
ConstGenParticleProductionRange, and ConstGenParticleEndRange
* HepMC/WeightContainer.h: method to check for weight name is has_key()
* src/GenEventStreamIO.cc: use quotes to delineate weight names
2010-02-08 Lynn Garren
* remove unused PythiaWrapper5_720.h, PythiaWrapper6_152.h, and PythiaWrapper6_152_WIN32.h
* combine HerwigWrapper6_4.h and HerwigWrapper.h in a single file
* HepMC/PythiaWrapper.h: add getPythiaCrossSection function
* HepMC/HerwigWrapper.h: add getHerwigCrossSection function
* fio/PythiaWrapper.cc: implement getPythiaCrossSection function
* fio/HerwigWrapper.cc: implement getHerwigCrossSection function
* remove redundant examples/HerwigHelper.h.
2010-02-04 Lynn Garren
* doc/Makefile.am, examples/Makefile.am: use pkgdatadir to define the instation directory
The default installation directory is now ${prefix}/share/HepMC/doc
Override with --datadir=/some/directory/path
* HepMC/Polarization.h: add is_defined() and set_undefined()
is_defined returns false if the polarization is undefined
set_undefined unsets the defined flag and zeroes the Polarization
2010-01-28 Lynn Garren
* HepMC/GenEventIterators.h: This new header defines a set of classes
which provide the appropriate iterators ranges. They can be used to
simplify code and also work directly with such utilities as std::foreach.
These new classes are
GenEventVertexRange, ConstGenEventVertexRange,
GenEventParticleRange, ConstGenEventParticleRange,
GenVertexParticleRange,
GenParticleProductionRange, and GenParticleEndRange
* test/testHepMCIteration.cc: use the new iterator clases and
also illustrate the use of std::for_each
2010-01-26 Lynn Garren
* test/testHepMCIteration: illustrate use of std::for_each
2010-01-25 Lynn Garren
* HepMC/WeightContainer.h: add map-like functionality, allowing users to
name weights, while retaining the original vector interface for
complete backwards compatibility
If a name is not specified for a particular weight, the default
name is the weight's vector index.
Also add == and != operators.
* HepMC/GenEvent.h: add a private method used by the stream I/O
* src/GenEventStreamIO.cc: add a new line for weight names
The weight name line is optional when reading input and is
written only if the event weights object is not empty.
* test/testWeights.cc: add tests for WeightContainer
* test/testHepMC: test I/O of named weights
* examples/testPythiaCopies.cc: set some arbitrary weights
2010-01-09 Lynn Garren
* removed ParticleDataTable.h and all supporting references.
-------------------------- HepMC-2.05.01 --------------------------
2010-01-04 Lynn Garren
* HepMC/GenEvent.h: add write_cross_section(std::ostream&)
* src/GenEvent.cc: output the cross section (if it exists) when printing an event
* src/GenVertex.cc, GenParticle.cc: save and restore output stream state
when calling print methods
* examples: Calculate Pythia and Herwig cross sections using
getPythiaCrossSection from examples/PythiaHelper.h and
getHerwigCrossSection from examples/HerwigHelper.h.
Set the units explicitly.
* test/testHepMC.cc.in: call write_cross_section()
2009-12-28 Lynn Garren
* examples/VectorConversion.h: inline the functions
2009-07-08 Lynn Garren
* HepMC/Flow.h: improve the syntax of the erase() method
* test/testFlow.cc: adding a test of the Flow class
see https://savannah.cern.ch/bugs/index.php?52240
-------------------------- HepMC-2.05.00 --------------------------
2009-05-19 Lynn Garren
* HepMC/GenCrossSection: new class to contain the generated
cross section and cross section error. This information is
considered temporary and could change on an event by event basis.
* write GenCrossSection information with GenEvent whenever the
cross section has been set.
* GenEvent.h: add pointer to a CrossSection (null by default).
* examples: add example_PythiaStreamIO.cc,
which uses streaming I/O and GenCrossSection.
2009-05-07 Lynn Garren
* GenEvent: add streaming input and output methods:
std::ostream& write(std::ostream&);
std::istream& read(std::istream&);
Add some private methods used by streaming I/O.
2009-04-17 Lynn Garren
* GenEvent.h, GenVertex.h: explicitly disallow -- iterator operators.
* IO_GenEvent: add precision() to set output precision (default is 16).
IO_GenEvent uses the GenEvent streaming input and output operators.
Many of the protected methods are no longer useful and have been removed.
* IO_Exception class added for use when throwing errors.
If invalid data is encountered when reading an event, input will
read to the end of the event instead of failing and return an
empty GenEvent or null pointer.
* StreamHelpers.h: Define functions used by streaming I/O.
All are in the detail namespace.
* StreamInfo: Special class containing extra information needed
to process HepMC ascii I/O. This class is initialized by a call
to a custom iomanip when any I/O stream is initialized and deleted
by the stream destructor. Each stream has a separate instance.
* CommonIO is no longer necessary and has been removed.
* GenEvent: Add streaming input and output operators.
Add free functions to be used with streaming I/O: set_input_units,
write_HepMC_IO_block_begin, and write_HepMC_IO_block_end.
2009-03-02 Lynn Garren
* HeavyIon: Add streaming input and output operators.
Add is_valid() method.
* PdfInfo: Add streaming input and output operators.
Add is_valid() method.
2009-01-29 Lynn Garren
* HepMC/SimpleVector: remove FourVector::mag() and ThreeVector::mag()
Change test/testSimpleVector.cc and test/testMass.cc to reflect this.
* HepMC/HepMCDefs.h: New header containing HEPMC_HAS_UNITS and
similar macros so users can check for various code features.
HepMC/GenEvent.h includes HepMCDefs.h.
* HepMC/Version.h: Use new HEPMC_VERSION macro.
* HepMC/GenParticle: add is_undecayed(), has_decayed(),
and is_beam_particle() convenience methods.
Test these methods in test/testHepMC.
2009-01-28 Lynn Garren
* remove HepMC/IO_Ascii.h and test/testDeprecated
* remove HepMC/HepMC_CLHEP20.h
-------------------------- HepMC-2.04.01 --------------------------
2008-12-15 Lynn Garren
* src/CommonIO.cc: add space requested by -Wextra
The -Wextra flag is not a default compiler flag, request it with
configure ... CXXFLAGS="-Wextra"
2008-12-11 Lynn Garren
* test/testHepMCIteration.cc.in: add loop over children to the test
* src/IO_Ascii.cc, IO_GenEvent.cc: fix error messages
2008-06-24 Lynn Garren
* fio/IO_HEPEVT.cc: bug fix for inconsistency in HWHGUP
see https://savannah.cern.ch/bugs/?38173 for details
-------------------------- HepMC-2.04.00 --------------------------
2008-06-04 Lynn Garren
* doc/HepMC2_user_manual.tex: expand description of Ascii IO format
2008-05-29 Lynn Garren
* configure.ac: Use libtool versioning for libraries
2008-05-27 Lynn Garren
* configure.ac: Throw an error immediately if units are not specified.
-------------------------- HepMC-2.04.00.beta2 --------------------------
2008-05-21 Lynn Garren
* HepMC/GenEvent.h: Duplicate the existing constructors with new
constructors that have momentum and length as the first 2 arguments.
* examples: all examples except example_BuildEventFromScratch,
testHerwigCopies, and testPythiaCopies use default units
* HepMC/IO_GenEvent.h: add use_input_units() method
This method is needed ONLY if a) the input stream has no
unit information and b) it is known that the units of the input
stream do not match the default units.
2008-05-20 Lynn Garren
* revamp Units design completely
Replace MomentumUnits.h and PositionUnits.h with Units.h
Allowed unit designations are GEV, MEV, MM, and CM
* configure.ac: User MUST specify both --with-momentum_units=XX
and --with-length_units=YY. There are no defaults.
* HepMC/GenEvent.h: unit data members are now enums
2008-05-12 Lynn Garren
* HepMC/Pdfinfo.h: Input parton flavour codes id1 and id2 are expected
to obey the PDG code conventions, especially g = 21.
-------------------------- HepMC-2.04.00.beta --------------------------
2008-05-05 Lynn Garren
* configure.ac: use separate makefiles (VCMakefile.in) for Visual C++
The custom makefiles are invoked by default when using Visual C++.
* doc: Stop building postscript copies of the manuals, just
build and distribute PDF copies of the manuals.
2008-04-29 Lynn Garren
* remove deprecated IO_ExtendedAscii
2008-04-25 Lynn Garren
* cleanup examples: combine example_MyPythia.cc,
example_MyPythiaRead.cc, example_MyPythiaWithEventSelection.cc,
example_PythiaParticle.cc, and example_ReadMyPythia.cc into one example with multiple subsets.
* add tests to list of examples in the reference manual
2008-04-23 Lynn Garren
* src/GenVertex.cc: fix bug in edge_iterator operator++
* src/IO_Ascii.cc: fix for VC9
* src/IO_ExtendedAscii.cc: fix for VC9
* src/IO_AsciiParticle.cc: fix for VC9
2008-04-18 Lynn Garren
* HepMC/GenEvent.h: minor bug fix for gcc 4.3.0
* HepMC/IO_ExtendedAscii.h: minor bug fix for gcc 4.3.0
* HepMC/IO_GenEvent.h: minor bug fix for gcc 4.3.0
* src/IO_ExtendedAscii.cc: minor bug fix for gcc 4.3.0
* src/IO_GenEvent.cc: minor bug fix for gcc 4.3.0
2008-04-18 Lynn Garren
* ReadMe.cygwin: changing cygwin directions for new versions of VC
* HepMC/MomentumUnits.h: enum HepMCmomentumUnits{ UNKNOWN = 0, MEV, GEV };
Recommended usage: MomentumUnits::GEV
* HepMC/PositionUnits.h: enum HepMCpositionUnits{ unknown = 0, MM, CM }
Recommended usage: PositionUnits::MM
2008-04-17 Lynn Garren
* Rename configure.in to configure.ac, which is now the common usage.
* configure.ac: Major restructuring. Using libtool.
Only Linux, MacOSX, and Windows are explicitly supported.
All Makefile.am's have been restructured to use libtool.
2008-04-01 Lynn Garren
* HepMC/IO_GenEvent.h: replace const char* filename with
const std::string& in the constructor accepting a filename.
2008-03-31 Lynn Garren
* HepMC/GenEvent.h: random_states() now returns const std::vector<long>&
HepMC/GenVertex.h: position() now returns a const FourVector&
HepMC/GenParticle.h: flow() now returns const Flow&
and polarization() now returns const Polarization&
* HepMC/IO_GenEvent.h: add a constructor that accepts the filename
as a string.
2008-03-28 Lynn Garren
* HepMC/GenParticle.h: The momentum() method now returns a const
reference to a FourVector instead of a copy of a FourVector.
This change should be backwards compatible.
2008-03-27 Lynn Garren
* examples: set Herwig and Pythia units to GeV and mm
2008-03-26 Lynn Garren
* HepMC/MomentumUnits.h: new class to encapsulate momentum units,
which are represented by a single enum
* HepMC/PositionUnits.h: new class to encapsulate position units,
which are represented by a single enum
* GenEvent: add MomentumUnits and PositionUnits data members and
associated methods
* GenVertex: add protected convert_position method
* GenParticle: add protected convert_momentum method
* HepMC/PdfInfo.h: add pdf_id1(), pdf_id2(), set_pdf_id1(), and
set_pdf_id2() for the pdf set id numbers
* IO_GenEvent: get and put unit information in a new line
The first character of the unit line is "U".
* IO_GenEvent: process the new PdfInfo data members
* test/testUnits.cc: new test for MomentumUnits and PositionUnits
-------------------------- HepMC-2.03.08 --------------------------
2008-04-23 Lynn Garren
* src/GenVertex.cc: fix bug in edge_iterator operator++
* src/IO_Ascii.cc: minor fix for VC9
* src/IO_ExtendedAscii.cc: minor fix for VC9
* src/IO_AsciiParticle.cc: minor fix for VC9
-------------------------- HepMC-2.03.07 --------------------------
2008-04-18 Lynn Garren
* HepMC/GenEvent.h: minor bug fix for gcc 4.3.0
* HepMC/IO_ExtendedAscii.h: minor bug fix for gcc 4.3.0
* HepMC/IO_GenEvent.h: minor bug fix for gcc 4.3.0
* HepMC/ParticleData.h: minor bug fix for gcc 4.3.0
* src/IO_ExtendedAscii.cc: minor bug fix for gcc 4.3.0
* src/IO_GenEvent.cc: minor bug fix for gcc 4.3.0
-------------------------- HepMC-2.03.06 --------------------------
2008-03-12 Lynn Garren
* test: reduce size of input files
* IO_HEPEVT: add trust_beam_particles and set_trust_beam_particles
methods so the user can specify that no beam particles are available.
This fixes a problem with pythia6 input when the user chooses "none".
2008-03-11 Lynn Garren
* src/GenEvent.cc: The GenVertex pointer to the parent event was
not properly moved when the operator= method was used to copy
a GenEvent. That bug is now fixed.
* GenVertex: added protected change_parent_event_ method for swap
as part of bug fix.
* test/testMultipleCopies.cc.in: Add explicit tests for operator=
and swap.
* examples: minor tweaks for readability
-------------------------- HepMC-2.03.05 --------------------------
2008-02-22 Lynn Garren
* fio/IO_HEPEVT.cc: According to standard HepMC design, all vertices
in an event are expected to contain particles. If, for instance, the
first two particles have no parents, then they should simply not have
a production vertex. However, in at least one instance empty production
vertices were created for the first two particles. IO_HEPEVT now
protects against this.
2008-02-18 Lynn Garren
* HepMC/HEPEVT_Wrapper.h: fix calculation of the total size
of the common block
-------------------------- HepMC-2.03.04 --------------------------
2008-02-05 Lynn Garren
* test: use /bin/bash instead of /bin/sh in shell scripts
* GenEvent, GenVertex, GenParticle: remove static counters
These counters were only for the debugging convenience of the
HepMC code developer. They were not accessible by users.
2008-02-04 Lynn Garren
* fio/IO_HERWIG.cc: fix for Z0 mother-daughter problem (from Atlas)
* HepMC/SimpleVector.h: Remove simple math methods
2007-01-29 Lynn Garren
* examples/testHerwigCopies.cc: compare copies of Herwig events
* examples/testPythiaCopies.cc: compare copies of Pythia events
2007-01-15 Lynn Garren
* TempParticleMap.h: use barcode instead of counter for ordering
to solve a problem with changed order of particles when making copies
2007-01-14 Lynn Garren
* HepMC/CompareGenEvent.h: new utility to compare two
copies of a GenEvent object
* test/testMultipleCopies.cc.in: verify that two copies of
the same GenEvent object are, indeed, the same
* test/testHepMCIteration: use a different output file name so the
test will work if you build on top of the source code
-------------------------- HepMC-2.03.03 --------------------------
2007-12-17 Lynn Garren
* HepMC/SimpleVector.h: Add simple math methods:
FourVector operator + (const FourVector &) const;
FourVector & operator += (const FourVector &);
FourVector operator - (const FourVector &) const;
FourVector & operator -= (const FourVector &);
FourVector operator - () const;
FourVector & operator *= (double);
The same methods were also added to ThreeVector.
-------------------------- HepMC-2.03.02 --------------------------
2007-12-14 Lynn Garren
* doc: The HepMC 1 and HepMC 2 user manuals have been merged
into a single manual.
* HepMC/IO_GenEvent.h: check operator methods for consistency
2007-12-07 Lynn Garren
* HepMC/IO_GenEvent.h: fix problem with rdstate() and clear()
2007-12-04 Lynn Garren
* HepMC/IO_Ascii.h, IO_ExtendedAscii.h, IO_GenEvent.h and
src/IO_Ascii.cc, IO_ExtendedAscii.cc, IO_GenEvent.cc:
common input methodologies now handled by CommonIO
2007-12-03 Lynn Garren
* HepMC/CommonIO.h, src/CommonIO.cc:
new header for shared IO methods and keys
* src/IO_GenEvent.cc: use CommonIO
search for any of several allowed input data types
* HepMC/IO_GenEvent.h: disable write_particle_data_table and
fill_particle_data_table - that is best done outside HepMC
-------------------------- HepMC-2.03.01 --------------------------
2007-11-26 Lynn Garren
* configure.in: add support for g++-*
2007-11-26 Lynn Garren
* src/IO_GenEvent.cc: bug fix - fill event scale, alphaQED, and alphaQCD
-------------------------- HepMC-2.03.00 --------------------------
2007-10-30 Lynn Garren
* examples/example_ReadMyPythia.cc: New example to read the file
written by example_MyPythia.
* doc: remove the latex subdirectory after building the reference library
* GenEvent: add print_version( std::ostream& ) method.
If you don't specify an ostream, the default is std::cout.
* GenVertex: Store particles in vectors instead of sets.
Root IO does not properly restore the state of the particle
serial number counter, so the previous solution to retaining
consistent particle ordering within a vertex had to be revisited.
* IO_GenEvent: Replace the temparary particle map with TempParticleMap.
* HepMC/SearchVector.h: Utilities to facilitate working with the
vector of particles.
* HepMC/TempParticleMap.h: Temporary particle container that
allows us to maintain particle ordering when reading an event
with IO_Ascii and IO_ExtendedAscii.
* Use fully qualified names (e.g., HepMC::GenParticle) inside class
templates (e.g., std::map<>) wherever they are used within a
header so that rootcint can make the dictionary.
-------------------------- HepMC-2.02.01 --------------------------
2007-10-16 Lynn Garren
* configure.in: build dynamic libraries for MacOSX - thanks to James Monk
-------------------------- HepMC-2.02.00 --------------------------
2007-07-19 Lynn Garren
* IO_GenEvent: uses input and output streams
IO_GenEvent can be constructed with a file, an input stream, or
an output stream.
* IO_Ascii and IO_ExtendedAscii are deprecated.
* examples use IO_GenEvent
-------------------------- HepMC-2.01.10 --------------------------
2008-02-05 Lynn Garren
* test: use /bin/bash instead of /bin/sh in shell scripts
* doc: The HepMC 1 and HepMC 2 user manuals have been merged
into a single manual.
2008-02-04 Lynn Garren
* fio/IO_HERWIG.cc: fix for Z0 mother-daughter problem (from Atlas)
2008-01-14 Lynn Garren
* test/testHepMCIteration: use a different output file name so the
test will work if you build on top of the source code
2007-12-17 Lynn Garren
* HepMC/Flow.h: comment changes for doxygen
* HepMC/GenParticle.h, src/GenParticle.cc: remove remnant static counter
* Use fully qualified names (e.g., HepMC::GenParticle) inside class
templates (e.g., std::map<>) wherever they are used within a
header so that rootcint can make the dictionary.
* src/IO_ExtendedAscii.cc: make sure all info is filled when reading
* configure.in: add support for g++-*
build dynamic libraries for MacOSX - thanks to James Monk
-------------------------- HepMC-2.01.08 --------------------------
2007-10-23 Lynn Garren
* GenVertex: Store particles in vectors instead of sets.
Root IO does not properly restore the state of the particle
serial number counter, so the previous solution to retaining
consistent particle ordering within a vertex had to be revisited.
* IO_Ascii, IO_ExtendedAscii: Replace the temparary particle map
with the more sophisticated TempParticleMap.
* HepMC/SearchVector.h: Utilities to facilitate working with the
vector of particles.
* HepMC/TempParticleMap.h: Temporary particle container that
allows us to maintain particle ordering when reading an event
with IO_Ascii and IO_ExtendedAscii.
-------------------------- HepMC-2.01.07 --------------------------
2007-10-19 Lynn Garren
* Use fully qualified names (e.g., HepMC::GenParticle) inside class
templates (e.g., std::map<>) wherever they are used within a
header so that rootcint can make the dictionary.
-------------------------- HepMC-2.01.06 --------------------------
2007-08-07 Lynn Garren
* HepMC/GenEvent.h, GenVertex.h,GenParticle.h : add swap method
* src/GenEvent.cc, GenVertex.cc, GenParticle.cc:
use best practices for assignment and copy constructor
* HepMC/SimpleVector.h: add swap method
* HepMC/Flow.h: add swap method
* HepMC/WeightContainer.h: add swap method
* HepMC/Polarization.h: add swap method
add private valid_theta and valid_phi methods for use by constructors
src/Polarization.cc: use best practices for assignment and copy constructor
-------------------------- HepMC-2.01.05 --------------------------
2007-07-19 Lynn Garren
* HepMC/HeavyIon.h: make it nice for rootcint
-------------------------- HepMC-2.01.04 --------------------------
2007-07-18 Lynn Garren
* various bug fixes and protections
-------------------------- HepMC-2.01.03 --------------------------
2007-07-11 Lynn Garren
* src/IO*.cc: write HepMC version number
-------------------------- HepMC-2.01.02 --------------------------
2007-07-10 Lynn Garren
* HepMC/Version.h: add the ability to print the HepMC version number
* src/IO_ExtendedAscii.cc: write HepMC version number
2007-07-09 Lynn Garren
* src/IO_ExtendedAscii.cc: read/write beam particle information
fix a problem with reading optional info
* test/testMass.*: compare generated and calculated masses
2007-06-29 Lynn Garren
* HepMC/GenEvent.h, src/GenEvent.cc: define beam process methods
bool valid_beam_particles() const;
std::pair<GenParticle*,GenParticle*> beam_particles() const;
bool set_beam_particles(GenParticle*, GenParticle*);
bool set_beam_particles(std::pair<GenParticle*,GenParticle*> const &);
* fio/IO_HEPEVT.cc, fio/IO_HERWIG.cc: set incoming beam particles
* HepMC/PythiaWrapper*: remove old process struct
2007-06-21 Lynn Garren
* HepMC/GenEvent.h: add methods to set and access the number of
multi particle interactions in the event.
The default value of this number is -1.
* src/IO_ExtendedAscii.cc: read and write MPI information
2007-06-19 Lynn Garren
* HepMC/GenParticle.h: use uint64_t for the serial number counter
-------------------------- HepMC-2.01.00 --------------------------
2007-06-08 Lynn Garren
* HepMC/GenEvent.h, src/GenEvent.cc: add clear() method
* HepMC/GenParticleComparison.h:
define a GenParticle comparator
* HepMC/GenParticle.h, src/GenParticle.cc:
set a serial number to be used by GenParticleComparison
* HepMC/Flow.h, HepMC/GenVertex.h, src/Flow.cc, src/GenVertex.cc:
use std::set<GenParticle*,GenParticleComparison>
* test: automatic comparison of output files is now possible
-------------------------- HepMC-2.00.04 --------------------------
2007-06-01 Lynn Garren
* HepMC/GenEvent.h, src/GenEvent.cc: change interface such that
GenEvent makes its own copy of HeavyIon and PdfInfo
2007-05-29 Lynn Garren
* src/GenVertex.cc: initialize range in default constructor
* src/IO_Ascii*.cc: make sure every object is properly deleted
* test/testHepMCIteration.cc: add iterator test
-------------------------- HepMC-2.00.03 --------------------------
2007-04-23 Lynn Garren
* bootstrap, configure.in, doc/Makefile.am:
To avoid problems with different versions of latex, just build
the documents during the bootstrap step.
* doc/buildDoc.sh: builds the documents if doxygen and latex are present
2007-04-20 Lynn Garren
* HepMC/include/PythiaWrapper*.h:
inline the method definitions to avoid conflicts
* examples/initPythia.cc: put pythia intialization in a separate
file so we can test PythiaWrapper
-------------------------- HepMC-2.00.02 --------------------------
2007-02-12 Lynn Garren
* test/testHepMC.sh.in: works on Windows (Cygwin), MacOSX, and Linux
2007-02-07 Lynn Garren
* doc/doxygen-template: provide an html template
2007-01-30 Lynn Garren
* doc/doxygen.conf: use doxygen 1.5.1
2007-01-30 Lynn Garren
* examples/example_BuildEventFromScratch.cc: add example of
conversion from SimpleVector to HepLorentzVector
* examples/VectorConversion.h: VectorConversion.h is meant as a
template for user code converting to the vector of your choice.
2007-01-29 Lynn Garren
* fix everything so doxygen will create a useful reference manual
nearly every file has been touched, but only the comments changed
2007-01-25 Lynn Garren
* examples/example_MyPythiaRead.cc: read in the events you just wrote
* examples/*.cc: put all uses of IO_Ascii within an explicit scope
* configure.in, doc/Makefile.am: if latex is found, get the path
* test/testHepMC.sh.in: make the diff work for MacOSX
-------------------- HepMC-02-00-01 ---------------------------------
2007-01-17 Lynn Garren
* test/testSimpleVector.cc: exercise the vector methods
2007-01-16 Lynn Garren
* HepMC/SimpleVector.icc: implement ThreeVector::set(x,y,z)
2006-08-23 Lynn Garren
* install examples in $(prefix)/examples/HepMC
* check for latex and build documents if latex is present
-------------------- HepMC-02-00-00 ---------------------------------
2006-08-22 Lynn Garren
* src/IO_ExtendedAscii.cc: read and write generated mass as part of
particle line.
2006-08-18 Lynn Garren
* doc/HepMC2_user_manual.tex documentation for HepMC 2
2006-08-01 Lynn Garren
* HepMC/is_arithmetic.h, HepMC/enable_if.h supplied by Walter Brown
for a clean template constructor implementation.
2006-07-23 Lynn Garren
* HepMC/SimpleVector.h: add a templated constructor for both FourVector
and ThreeVector that will take any lorentz vector which has the
x(), y(), z(), and t() methods. This should enable existing code
that uses CLHEP Vector classes to keep working.
2006-07-19 Lynn Garren
* replace CLHEP/Vector/LorentzVector.h and CLHEP/Vector/ThreeVector.h
with HepMC/SimpleVector.h
implement some of the basic vector properties so user code won't break
-------------------- HepMC-01-28-00 ---------------------------------
2006-08-08 Lynn Garren
* HepMC/IO_ExtendedAscii.h: Extended format writes PdfInfo and HeavyIon
if they are present in the event. This is otherwise identical
to IO_Ascii.h.
2006-07-30 Lynn Garren
* HepMC/HEPEVT_Wrapper.h: fix for 64bit machines
2006-07-26 Lynn Garren
* HepMC/PdfInfo.h implements information requested by CMS
* GenEvent.h, GenEvent.cc make sure m_pdf_info is initialized to 0
-------------------- HepMC-01-27-02 ---------------------------------
2006-06-19 Lynn Garren
* fix test for Windows
* add ReadMe.cygwin-VC71 and setup.cygwin-VC71
2006-06-14 Lynn Garren
* GenEvent.cc, GenParticle.cc, GenVertex.cc use standard C++ output
* testPrintBug new test for output problems with gcc 4.x
* HepMC/HepMC_CLHEP20.h defines several typedefs needed when compiling
with CLHEP 2.0.x
* HEPEVT_Wrapper.h, HerwigWrapper6_4.h, PythiaWrapper6_2.h
need extern "C" statements for gcc 4.x
* HepMC_CLHEP20.h, Polarization.h, GenVertex.h, GenParticle.h
HepMC will work with both CLHEP 1.9.x and 2.0.x
-------------------- HepMC-01-27-01 ---------------------------------
2006-03-31 Lynn Garren
* GenEvent.h, GenEvent.cc make sure m_heavy_ion is initialized to 0
2006-03-29 Lynn Garren
* HepMC/ParticleData.h remove dependency on CLHEP/Units by HepMC_hbarc
* HepMC/Polarization.h remove dependency on CLHEP/Units by HepMC_pi
-------------------- HepMC-01-27-00 ---------------------------------
2006-03-07 Lynn Garren
* add simple check in the test subdirectory
2006-02-17 Lynn Garren
* HepMC/HeavyIon.h names have been changed to match both HepMC and
wishes of heavy ion users
2006-01-12 Lynn Garren
HepPDT 1.26 is available at https://savannah.cern.ch/projects/hepmc/
* HepMC/HeavyIon.h implements information requested by CMS
* HepMC/GenParticle.h has pointer (null by default) to HeavyIon
* code providing interfaces to Fortran common blocks has been moved
out of libHepMC and into libHepMCfio
-------------------- HepMC-01-02-26 ---------------------------------
-------------------- HepMC-01-02-21 ---------------------------------
2005-04-27 Matt Dobbs and Giorgos
* src/IO_HERWIG.cxx implemented a bug fix suggested by borut,
which keeps the remapping of daughters/motherrs from going "over
the end" on herwig events (was noticed in the tauola events for
rome DC).
2004-08-04 David Quarrie <David.Quarrie@cern.ch>
* cmt/requirements: Change dependencies on CERNLIB and CLHEP
to AtlasCERNLIB and AtlasCLHEP to avoid name clashes
-------------------- HepMC-01-02-19 ----(gcc 3.2 compatible)---------
2004-04-22 Matt Dobbs <Matt.Dobbs@Cern.CH>
* src/IO_HERWIG.cxx (HepMC): fixed bug reported by Hinchliffe in
IO_HERWIG wherein (for the special case of min bias events only)
number of entries in HEPEVT was being zero-ed by the IO_HERWIG
class. Added extra protection in HEPEVT_Wrapper for this as well.
-------------------- HepMC-01-02-18 ----(gcc 3.2 compatible)---------
2004-03-27 Matt Dobbs <Matt.Dobbs@Cern.CH>
Removed the #define statements that allow backwards compatibility
with gcc 2.95, and specialized the 3.2 compliant iterators to be
forward iterators such that they work properly with std
algorithms.
Thanks to Ulrik Egede for pointing this out.
* HepMC/GenVertex.h, .cxx HepMC/GenEvent.h, .cxx: changed
std::forward_iterator<GenParticle*,ptrdiff_t>
to
std::iterator<std::forward_iterator_tag,GenParticle*,ptrdiff_t>
for standard
compliance, and removed #define statements.
* HepMC/IO_Ascii.h,.cxx: changed open_mode to openmode for standard
compliance, and removed #define statements.
2003-12-17 David Rousseau <droussea@lxplus072.cern.ch>
* cmt/requirements: remove HepMC_libraries
2003-10-22 Matt Dobbs <Matt.Dobbs@Cern.CH>
* src/GenEvent.cxx and lots of other files + latex documentation.
REmoved any mention of units--- GeV, MeV etc, since HepMC merely
accepts whatever is put in. I do this because, though HEPEVT has
used GeV/mm, ATLAS plans to use CLHEP units of MeV/mm.
2003-10-15 Matt Dobbs <Matt.Dobbs@Cern.CH>
* src/GenParticle.cxx (HepMC): added a default constructor for
GenParticle as requested by Giorgos S.
-------------------- HepMC-01-02-14 ----(gcc 3.2 compatible)---------
2003-04-21 Matt Dobbs <Matt.Dobbs@Cern.CH>
* src/IO_HERWIG.cxx:
minor changes to handling of herwig event record
-------------------- HepMC-01-02-11 ----(gcc 3.2 compatible)---------
2003-03-10 Matt Dobbs <Matt.Dobbs@Cern.CH>
* HepMC/IO_BaseClass.h:
Fixed bug reported by Peter Loch, wherein the virtual destructor
for IO_BaseClass was missing.
-------------------- HepMC-01-02-10 ----(gcc 3.2 compatible)---------
2003-03-03 Matt Dobbs <Matt.Dobbs@Cern.CH>
* HepMC/GenVertex.h: added extra ifdef statement to allow
compilation on gcc 3.2. (forward_iterator and open_mode problems).
* HepMC/IO_Ascii.h: as above.
* src/IO_Ascii.cxx (HepMC): as above.
2003-01-17 Matt Dobbs <Matt.Dobbs@Cern.CH>
* src/IO_PDG_ParticleDataTable.cxx (HepMC): if the PDG table does
not exist, we abort, rather than just returning false.
-------------------- HepMC-01-02-04 ----(5.0.0)------------
2002-11-04 Matt Dobbs <Matt.Dobbs@Cern.CH>
* src/GenEvent.cxx (HepMC): set_barcode(particle, barcode),
set_barcode(vertex, barcode) Fixed a bug reported by Giorgos S.
For this bug, a user suggests a barcode for a vertex that is
already part of an event... the vertex is inserted in the vertex
map with the new barcode, but HepMC forgets to erase the old
entry... such that the vertex now appears twice in the map. This
is fixed, and the corresponding error for particles is also fixed.
2002-10-31 Matt Dobbs <Matt.Dobbs@Cern.CH>
* HepMC/IO_HERWIG.h: modified IO_HERWIG to include a switch
(default m_no_gaps_in_barcodes=on) which removes null entries from
Herwig HEPEVT and reshuffles the common block
2002-10-22 Matt Dobbs <Matt.Dobbs@Cern.CH>
* HepMC/HerwigWrapper6_4.h, HepMC/HerwigWrapper.h: new interface
to HERWIG Version 6.4 is added. There is an example for using it
at examples/example_MyHerwig.cxx. To use this example you will
have to download HERWIG version 6.4 and modify the Makefile to
link it.
* HepMC/IO_HERWIG.h: New class for reading the Herwig version of
the HEPEVT common block is added. READ THE COMMENTS IN THE .h file
carefully before using it!
2002-07-29 Matt Dobbs <Matt.Dobbs@Cern.CH>
-------------------- HepMC-01-02-03 ----(4.0.2)------------
* src/GenVertex.cxx (HepMC): remove_particle()
* HepMC/GenVertex.h:
removed confusing comment about the use of GenVertex::remove_particle()
in .h file, and clarified the comment in .cxx file.
* src/GenEvent.cxx (HepMC): operator=
bug discovered by <Malte.Muller@cern.ch>.
Formerly, the GenEvent::operator= method relied on the particles
attached to each vertex to always be in the same order. However,
since the particles are stored in set<>, this is not always true
-- making the results of the operator= method unreliable.
This is fixed by mapping the vertices explicitly.
* src/IO_PDG_ParticleDataTable.cxx (HepMC):
added a line in read_entry that ignores empty lines (previously
empty lines in the pdg data table generated a cerr message).
This change was requested by Davida Costanzo.
2002-03-02 Matt Dobbs <Matt.Dobbs@Cern.CH>
-------------------- HepMC-01-02-02 ----(3.0.1)------------
* src/GenVertex.cxx (HepMC):
GenVertex::edge_iterator::edge_iterator( .. )
Extra error protection added in the constructor.
Sometimes the edge_iterator fails when we have a vertex with no
in_particles. This never happens in standalone mode, but when ran
with the ATLAS framework, it does happen. New code identifies the
scenario explicitly, and catches the error, which has to do with
the past-the-end value of the edge_iterator.
* test/test_iterators.cxx: new test program added for iterators,
to test for the above problems.
2002-02-19 Matt Dobbs <Matt.Dobbs@Cern.CH>
CHANGES TO ALLOW HEPMC TO COMPILE WITH SOLARIS CC 5.2
* cmt/requirements: added the line
macro_append cppflags "" Solaris " -D__SUNPRO_CC "
to handle Solaris CC 5.2 features.
* HepMC/ParticleDataTable.h:
turns on MISSING_FORWARD_ITERATOR when __SUNPRO_CC is defined.
This defines forward_iterator as iterator
* HepMC/GenVertex.h:
same as ParticleDataTable.h, but also turns on
NEED_SOLARIS_FRIEND_FEATURE when __SUNPRO_CC is defined.
* src/Polarization.cxx (HepMC):
replaced abs() with theta = ( theta>0 ? theta : -theta );
for compatibility with Solaris.
2002-02-15 Matt Dobbs <Matt.Dobbs@Cern.CH>
-------------------- HepMC-01-02-01 ----(3.0.0)------------
* HepMC/GenEvent.h: bug discovered by <srinir@bnl.gov> with help
from Paolo and Hong.
The GenEvent::particle_iterator, const_particle_iterator,
vertex_iterator, const_vertex_iterator
had methods like:
bool operator !=(const particle_iterator& a) const
{ return !(**this == *a); }
which doesn't work because you are not allowed to de-reference
the end() iterator [the above coding is a relic of the old
walking iterators which did not inherit from
forward_iterstor, and for which *end() was well
defined.]
The correct usage is:
{ return m_map_iterator == a.m_map_iterator; }
Note: this does NOT affect the GenVertex::***_iterator's, since
for those iterators *end() is well defined.
2002-01-23 Matt Dobbs <Matt.Dobbs@Cern.CH>
-------------------- HepMC-01-02-00 --------------------
( Public Version 1.2 )
User manual, webpage, and public version updated.
The CLHEP names branch, called HepMC-00-00-96-CLHEP, has
been moved to the head of the main trunk in cvs, and commited.
Thus the main trunk is the only development branch.
2002-01-22 Matt Dobbs <Matt.Dobbs@Cern.CH>
-------------------- HepMC-01-01-12 --------------------
* src/GenEvent.cxx (HepMC): delete_all_vertices()
modified the increment of the vertex iterator when looping over
vertices for deletion.
* src/GenVertex.cxx (HepMC): delete_adopted_particles()
modified the increment of the particle iterator when looping over
particles for deletion.
2002-01-21 Matt Dobbs <Matt.Dobbs@Cern.CH>
-------------------- HepMC-01-01-07 --------------------
* HepMC/GenEvent.cxx (delete_all_vertices):
Possible bug reported here by ATLfast group. Added extra error
checking, and changed the deleting of the vertices such that each
one is explicitly erased from the map.
2002-01-18 Matt Dobbs <Matt.Dobbs@Cern.CH>
More changes for Windoes MS Visual C++ compatibility:
* HepMC/PythiaWrapper6_2.h, HepMC/PythiaWrapper6_152.h:
included new wrapper methods like call_pyinit, which hide the
funny syntax necessary to call fortran routines from C++.
* examples/example_MyPythiaWithEventSelection.cxx:
* examples/example_MyPythiaOnlyToHepMC.cxx:
* examples/example_MyPythia.cxx:
* examples/Benchmarks_f77/example_PythiaToLCWrite.cxx:
modified to use the call_*** pythia methods.
2002-01-15 Matt Dobbs <Matt.Dobbs@Cern.CH>
-------------------- HepMC-01-01-06 --------------------
* Makefile.standalone: updated to use cernlib 2001 and pythia6152
* examples/example_UsingIterators.cxx:
The input file was from the old non-barcodes version, and so
didn't work. Replaced it with a proper input file.
These changes suggested by Witold Pokorski <Witold.Pokorski@Cern.Ch> from
LHCb to allow for Windows Visual C++ compliance. All of these changes are
fully backwards compatible(!).
* HepMC/GenEvent.h, HepMC/GenVertex.h: change forward_iterator to
simply iterator (which in the STL standard apparently implies
forward_iterator)
In Visual c++, a for (int i ... ) {} statement does not scope out
the i variable ... so had to modify the code to ensure no
variables were used twice in the same method:
* src/IO_Ascii.cxx (HepMC):
in lines 155, 161, 175 "int i" is repeated
in lines 293, 314, 321 "int i" is repeated
in lines 293, 314, 321 "p" is repeated
* src/IO_HEPEVT.cxx (HepMC):
in lines 59,65,88 "i" is repeated
in lines 118, 129 "p" is repeated
* src/IO_PDG_ParticleDataTable.cxx (HepMC):
in lines 80, 103, 124 "id_i" is repeated
* src/GenVertex.cxx (HepMC):
in lines: 64 and 72; 168 and 178; 195 and 201; 260 and 273;
322 and 331 variable "part" is repeated
* have verified all STL calls for set, map, less, greater, cout,
endl, list, cerr, ios, iostream, flush are properly prefixed with
std::
* HepMC/GenEvent.h: bug fix:
added a std::greater<int> qualifier to the m_map_iterator of the
vertex iterators.
* HepMC/GenVertex.h: bug fix:
made the GenVertex::particle_iterator a friend of GenVertex.
* HepMC/GenEvent.h, HepMC/GenVertex.h:
move all of the friend class declarations
into statements separate from the class declaration, i.e.
class edge_iterator { ... };
friend class edge_iterator;
instead of
friend class edge_iterator{ ... };
Change all std::ptrdiff_t to ptrdiff_t
* HepMC/IO_Ascii.h: ios::openmode changed to ios::open_mode in the
constructor, for compatibility with windows Visual C++.
* Change #include <iostream.h> to #include <iostream>
Note: this will spoil compatibility with HPUX 10.2 CC.
2001-11-29 Matt Dobbs <Matt.Dobbs@Cern.CH>
-------------------- HepMC-01-01-05 --------------------
* Fix typo in user manual "particle barcodes are positive"
2001-11 Matt Dobbs <Matt.Dobbs@Cern.CH>
-------------------- HepMC-01-01-04 --------------------
* update user manual to explain barcodes. NO changes to code.
2001-11-10 Matt Dobbs <Matt.Dobbs@Cern.CH>
-------------------- HepMC-01-01-03 --------------------
* cmt/requirements: jetset74 requirement removed, as requested by
I.Hinchliffe.
2001-11-04 Matt Dobbs <Matt.Dobbs@Cern.CH>
-------------------- HepMC-01-01-02 --------------------
* HepMC/GenVertex.h: removed merge_vertex() method.
* HepMC/IO_HEPEVT.h:
removed the merge_vertices possibility, but added a
build_production_vertex possibility to build_end_vertex.
-------------------- HepMC-01-01-01 --------------------
* src/HEPEVT_Wrapper.cxx (HepMC):
new method check_hepevt_consistency() added.
new method zero_everything() added.
2001-11-02 Matt Dobbs <Matt.Dobbs@Cern.CH>
-------------------- HepMC-01-01-00 --------------------
* src/IO_HEPEVT.cxx (HepMC):
Modified such that the HEPEVT indices are used for the particle
barcodes.
* HepMC/IO_Ascii.h:
Modifed to properly read/write the barcodes and the
GenEvent new data members.
Unique reference numbers called "barcodes" are added as data
members to GenParticles and GenVertices.
They are cross-referenced in GenEvent via a map<int,GenXXX>.
The GenEvent::m_vertices container of vertices is then no longer
necessary, so it is removed.
The GenEvent::particle_iterator and GenEvent::vertex_iterator
are updated to walk over the maps. The iterator change should be
transparent to the user.
Constant versions of both iterators are included.
The old GenEvent::vertex_iterator was a typedef of the set:
typedef std::set<GenVertex*>::iterator vertex_iterator;
The maps get filled via the:
set_barcode( GenXXX* x, int suggested_barcode )
methods, which in turn are called only by the vertex and particle:
GenVertex::set_parent_event_()
GenPartcle::set_production_vertex_()
GenPartcle::set_end_vertex_(}
* HepMC/GenEvent.h:
New data members and access methods are added for consistency with
the HepUP standard, see hep-ph/0109068
double GenEvent::m_event_scale
double GenEvent::m_alphaQCD
double GenEvent::m_alphaQED
* src/IO_HEPEVT.cxx (HepMC): Fixed some const warnings with the
GenEvent::vertex_iterator usage.
2001-10-11 Matt Dobbs <Matt.Dobbs@Cern.CH>
-------------------- HepMC-01-00-01 --------------------
* cmt/requirements: changed use CERNLIB v2001 External to use
CERNLIB CERNLIB-01-* External as per r.d.'s request
2001-10-10 Matt Dobbs <Matt.Dobbs@Cern.CH>
-------------------- HepMC-01-00-00 --------------------
Identical to HepMC-00-03-08. This tag name follows atlas
naming conventions ... increment the major tag when code is NOT
backwards compatible. Since Atlas is moving from tag
HepMC-00-01-12 (old atlas names) to HepMC-00-03-08 (clhep names)
this change is not backwards compatible.
2001-09-05 Matt Dobbs <Matt.Dobbs@Cern.CH>
------- below this line is tag HepMC-00-03-08 ----------
(clhep names version to be used in atlas. The changes have not
been made in the HepMC-00-01-** branch)
* src/IO_HEPEVT.h (HepMC):
* src/IO_HEPEVT.cxx (HepMC): When inconsistent info between
mother and daughters is found in the
IO_HEPEVT::build_production_vertex method, IO_HEPEVT will no
longer merge_vertex (the 2001-03-29 "fix") by default. In order to
get this behaviour you have to explicitly ask for it with the
IO_HEPEVT::set_merge_vertex_switch() method.
2001-09-05 Matt Dobbs <Matt.Dobbs@Cern.CH>
* cmt/requirements: added to the CLHEP names branch (its just a
direct copy of what is in the trunk ATLAS names).
2001-07-17 Matt Dobbs <Matt.Dobbs@Cern.CH>
(note: HepMC-00-01-24 is an accidental tag which should be ignored)
----- below this line is HepMC-00-01-23, HepMC-00-03-07 -----
* src/GenVertex.cxx (HepMC):
GenVertex::vertex_iterator::follow_edge_() added extra error
checking for the very special-rare case where a particle might
point to the same vertex for both production and end.
Meant to handle Ian H.'s bug of 02 Jul 2001
2001-06-28 Matt Dobbs <Matt.Dobbs@Cern.CH>
-------------------- HepMC-00-03-06 --------------------
* examples/GNUmakefile.in:
updated the makefile to link to cernlib 2001 version of pythia.
This involves a change -lpythia6136 to -lpythia6152 -lpythiad
Note that for xample_MyPythiaWithEventSelection.cxx 1/100 or
36/1000 events pass cuts (with 6.136 it was 3/100 or 37/1000).
* HepMC/GenParticle.h: now has a parent_event() access method,
which returns the parent_event of the particle's container
vertex's event.
2001-06-27 Matt Dobbs <Matt.Dobbs@Cern.CH>
---> Make the Vertex know which event it in in. <---
* HepMC/GenVertex.h: added private data member m_event, public
access method parent_event() and protected access method
set_parent_event, which is only to be used by GenEvent. Thus
GenEvent is made to be a friend of GenVertex.
* HepMC/GenEvent.h, src/GenEvent.cxx (HepMC): added logic to
GenEvent::remove_vertex and GenEvent::add_vertex. The vtx's
m_event pointer is set to point back to the event.
* HepMC/ParticleData.h:
* HepMC/GenEvent.h:
* HepMC/GenParticle.h:
* HepMC/GenVertex.h: made method counter() protected. It was never
intended as public, merely as a method for detecting memory
leaks. If no-one complains (they shouldn't, it was commented
"temporary for debugging") I'll remove it entirely later.
2001-03-29 Matt Dobbs <Matt.Dobbs@Cern.CH>
* src/IO_HEPEVT.cxx (HepMC):
When m_trust_mothers_before_daughters=0, the vertex position is
now filled. In ISAJET sometimes disjoint vertex structures exist,
in this case a merger of vertices is done, which accounts for it.
* HepMC/GenVertex.h:
* src/GenVertex.cxx (HepMC):
Added a void merge_vertex_contents( GenVertex* v_in );
method which takes all the contents of v_in and places it in
the vertex. It does not delete v_in, nor does it remove
v_in from an event.
It will mainly be used by IO_HEPEVT, but it is forseen that users
may want to use it when reducing the overall size of the event
(deleting intermediate vertices) such as will be done by atlas.
2001-02-28 Matt Dobbs <Matt.Dobbs@Cern.CH>
* Makefile.standalone:
using
HepMCdir = $(shell pwd)
instead of
HepMCdir = /afs/cern.ch/user/m/mdobbs/HepMC/myCheckoutV1.01
for better portability.
* src/GenVertex.cxx (HepMC): added extra protection to the
GenVertex::edge_iterator::edge_iterator constructor to give
sensible result for the special case when a vertex has incoming
particles, but none outgoing and the user requests a children
iterator. The old version would have
m_set_iter points to m_particles_in.begin() and so the first
dereference might be wrong.
* HepMC/IO_HEPEVT.h: Two new switches are added to give more
flexibility in handling the possible inconsistencies arrising
from the bi-directional pointers in HEPEVT. The switches are:
bool m_trust_mothers_before_daughters;
bool m_print_inconsistency_errors;
which are described by comments in the code. Also makes minor
changes to src/IO_HEPEVT.cxx
* HepMC/Typedef_Version0names.h:
This header file added. It contains typedef statements which
should allow the new version 1.XX class names to be used with code
written with the old version 0.XX class names.
If the user wants to take advantage of these typedefs he needs to
define type variable HEPMC_SHORT_NAMES in his compiler options as
follows: -DHEPMC_SHORT_NAMES
or in his code using #define HEPMC_SHORT_NAMES
Note that since the header file names also changed, this ALSO
requires changing the include statements in the user code.
* doc/latex_user_manual/physicist_visualization.eps
fixed a mis-labelling in this figure... the labels were all
shifted and intermingled... its now right. Unfortunately
the mislabelled version appears in the CPC publication.
also affects doc/latex_user_manual/HepMC_user_manual.ps
******************************************************
Everything below this line corresponds to Version 1.01
******************************************************
2001-01-11 Matt Dobbs <Matt.Dobbs@Cern.CH>
* examples/example_UsingIterators.cxx:
Changed the class IsFinalState such that a particle must have no
end vertex AND have status==1 to be considered stable.
Does not effect package, only this specific example.
* HepMC/IO_BaseClass.h:
Bug reported by Lynn Garren
"There appears to be a problem with const-ness in HepMC/IO_BaseClass.h.
I have made the following changes in order to compile HepMC 1.0
with g++.
virtual const GenEvent*& operator<<( GenEvent*& );
becomes
virtual GenEvent*& operator<<( GenEvent*& );
virtual const ParticleDataTable*& operator<<( ParticleDataTable*& )
becomes
virtual ParticleDataTable*& operator<<( ParticleDataTable*& )
In other words, I have made the const-ness match."
...
These changes are implemented by Matt in the atlas repository.
* HepMC/HEPEVT_Wrapper.h:
Bug reported by Andreas Dell'Acqua
HEPEVT_Wrapper::last_child
HEPEVT_Wrapper::last_parent
There methods were returning 0 when exactly one parent exists. This
caused the number_children and number_parent methods to return 0
every time there was exactly 1 parent/child. This error caused
major problems in the IO_HEPEVT class, with the end result that
the HEPEVT graphs were interpretted incorrectly [all particles are
correctly interpretted, but their relationships are incorrect for
the case where a particle has exactly ONE mother: in this case the
particles appeared as orphans.]
This bug was
introduced in version HepMC-00-00-94, so it has been present for
some time. This fix is for HEPEVT_Wrapper::last_child():
// Returns the Index of the LAST child in the HEPEVT record
// for particle with Index index.
// If there is only one child, the last child is forced to
// be the same as the first child.
// If there are no children for this particle, both the first_child
// and the last_child with return 0.
// Error checking is done to ensure the child is always
// within range ( 0 <= parent <= nhep )
* src/IO_HEPEVT.cxx (HepMC):
only comments in IO_HEPEVT::build_particle have changed. No change
to code.
******************************************************
Everything below this line corresponds to Version 1.0
******************************************************
2000-11-10 Matt Dobbs <Matt.Dobbs@Cern.CH>
MAJOR NAME CHANGES AFFECT ALMOST ALL FILES:
GeneratorEvent --> GenEvent
Particle --> GenParticle
Vertex --> GenVertex
user manual and online documentaion are updated to reflect this.
* HepMC/PythiaWrapper6_152.h:
A new wrapper for Pythia 6.1 is created to replace the old Pythia
5.7 wrapper. It works with the versions of Pythia in both
CERNlib2000 and CERNlib2001 (versions 6.136 and 6.152 and probably
any Pythia 6).
A pointer file:
* HepMC/PythiaWrapper.h:
is created so the used doesn't have to worry about pythia version
numbers. A test file is located at:
* test/test_PythiaWrapper.cxx
All examples are updated to use Pythia 6.
2000-11-09 Matt Dobbs <Matt.Dobbs@Cern.CH>
* HepMC/WeightContainer.h:
Created this class to house the weights in the vertex and event
classes. It is just an interface to std::vertex<double>.
The vertex class is modifid to use this. Required changes to:
* HepMC/Vertex.h:
* src/Vertex.cxx:
* src/IO_Ascii.cxx (HepMC):
******************************************************
Everything below this line corresponds to Version 0.94
******************************************************
2000-07-05 Matt Dobbs <Matthew.Adam.Dobbs@Cern.CH>
* HepMC/HEPEVT_Wrapper.h: Completely new wrapper for HEPEVT_Common
is implemented. This wrapper treats the common as a series of
bytes and interprets them "on the fly". The user can set the size
(in bytes) of the integer and real numbers to be interpretted from
HEPEVT, and also the total number of entries in HEPEVT. This
allows the user to interface to two applications which use
different HEPEVT definitions.
Benchmarks: 1000 events pythia only 34 seconds.
1000 events Pythia+HepMC(using this new wrapper) 40s
on my particular machine. (extra time is 6 seconds.) Compare this
to the extra 5 seconds reported in the HepMC user manual for the
old HEPEVT wrapper ... so the difference is small compared to the
old wrapper considering the added functionality.
(all examples have been tested and they Run!)
* HepMC/HEPEVT_Common.h: Deleted, this common is now defined
inside HEPEVT_Wrapper.h
* src/HEPEVT_Wrapper.cxx (HepMC): This file is created since it is
necessary to instantiate the static members of HEPEVT_Wrapper in a
.cxx file.
* Makefile.Standalone: modified to build src/HEPEVT_Wrapper.cxx into
the HepMC library
* HepMC/IO_HEPEVT.h: Comment modified only so as to treat
HEPEVT_Wrapper consistently.
* examples/example_MyPythiaWithEventSelection.cxx: Modified to use new
HEPEVT_Wrapper
* examples/example_MyPythia.cxx: Modified to use new
HEPEVT_Wrapper
* examples/example_MyPythiaOnlyToHepMC.cxx (main): Modified to use new
HEPEVT_Wrapper
* PACKAGE: added linkset HepMC -lib:HepMC
(Modified GNUmakefile.in to use libHepMC.so as HepMC linkset)
2000-07-04 Matt Dobbs <Matthew.Adam.Dobbs@Cern.CH>
* examples/GNUmakefile.in: $(top_srcdir) replaced by
$(srcdir)
* GNUmakefile.in (libHepMC.so_SRC): The location of src .cxx files
is now explicitly specified with $(top_srcdir)/src/*.cxx
This makefile now builds oth a shared library libHepMC.so and
libHepMC.a (requested by Ian H.)
* the initpydata.f routine is no longer compiled into the the
HepMC library, but is still packaged with the other routines.
The user needs to link to it explicitly. See the GNUmakefile.in
in the examples directory for an example of how to do this.
(requested by Ian H.)
* ./src is replaced with $(top_srcdir)/src everywhere in the
GNUmakefile.in
Files changed this time:
GNUmakefile.in, examples/GNUmakefile.in, Makefile.standalone,
Changelog
2000-05-18 Matt Dobbs <Matthew.Adam.Dobbs@Cern.CH>
* HepMC/IO_BaseClass.h: There is now a fill_next_event method.
- bool fill_next_event( GeneratorEvent* evt ) is a new abstract method
which fills the passed event, and also returns true if successful.
- GeneratorEvent* read_next_event() is now make concrete. it
creates a new event, fills it using the above abstract method,
and returns the event
This change is backwards compatible since the method
read_next_event() has identical behavior.
Identical changes are made for the methods:
- bool fill_particle_data_table( ParticleDataTable* pdt )
- ParticleDataTable* read_particle_data_table()
The methods are updated [ i.e. GeneratorEvent* read_next_event()
is changed to bool fill_next_event( GeneratorEvent* evt ), etc. ]
in:
- IO_HEPEVT.h
- IO_Ascii.h
- IO_PDG_ParticleDataTable.h
- IO_HEPEVT.cxx
- IO_Ascii.cxx
- IO_PDG_ParticleDataTable.cxx
(This change requested by Ian Hinchliffe and Marjorie Shapiro.)
2000-04-24 Matt Dobbs <Matthew.Adam.Dobbs@Cern.CH>
* HepMC/HEPEVT_Wrapper.h: set_momentum and set_position now
properly cast input doubles as type HEPEVT_Precision,
previously they were hardwired as cast to double, this
meant writing to real*4 hepevt would fail.
******************************************************
Everything below this line corresponds to Version 0.91
******************************************************
2000-04-11 Matt Dobbs <Matthew.Adam.Dobbs@Cern.CH>
* doc/latex_user_manual/HepMC_user_manual.tex: User manual is
updated to replect changes since V0.9
- HEPEVT and position in [mm]
2000-04-06 Matt Dobbs <Matthew.Adam.Dobbs@Cern.CH>
* examples/example_MyPythia.cxx
* examples/example_MyPythiaOnlyToHepMC.cxx
* examples/example_MyPythiaWithEventSelection.cxx:
By commenting out the initpydata call (which may be required on
some systems to initialize the Pythia PYDATA block data as
external) the MyPythia examples now run on HPUX (and still on
Linux). Have not tested other platforms.
* Makefile: HPUX with gcc requires the -lf library which contains
the fortran intrinsic function.
2000-04-05 Matt Dobbs <Matthew.Adam.Dobbs@Cern.CH>
The changes below will have no effect on the user or package, they
just serve to remove warnings when compiling.
* HepMC/Vertex.h: 313:342:364: warning: unused parameter `enum
::HepMC::IteratorRange dummy_range' (all dummy range parameters
now appear as particles_end( IteratorRange /* dummy_range */ ) )
* src/IO_Ascii.cxx (HepMC): 506: warning: ANSI C++ forbids
variable-size array `c' (the array is now declared as char* c =
new char[key_length +1]; and deleted before returning)
* HepMC/IO_PDG_ParticleDataTable.h: 53: warning: control reaches
end of non-void function read_next_event()
(this is a dummy function anyway -- return 0)
* HepMC/IO_HEPEVT.h:55: (as above)
* src/Flow.cxx (HepMC): 26: warning: default argument given for
parameter 1 of `void ::HepMC::Flow::print(class ostream & = cout)
const' (done)
* HepMC/IO_HEPEVT.h:57: warning: base class `class
::HepMC::IO_BaseClass' should be explicitly initialized in the
copy constructor (done)
* HepMC/IO_Ascii.h: 98: (as above)
* HepMC/IO_PDG_ParticleDataTable.h: 56: (as above)
* HepMC/ParticleDataTable.h: 155: warning: suggest parentheses
around assignment used as truth value (done)
* src/IO_Ascii.cxx (HepMC): 37: warning: default argument given
(removed default argument)
* HepMC/Flow.h:21: warning: multiline `//' comment
(added space after \ to remove compiler warning)
* HepMC/Particle.h: removed =0 in the inline declaration
inline void Particle::set_flow( int code_index, int code = 0 )
(caused warning).
2000-04-04 Matt Dobbs <Matthew.Adam.Dobbs@Cern.CH>
* HepMC/HEPEVT_Wrapper.h: HepMC/HEPEVT_Common.h:
replace the classes HEPEVT_BaseClass.h HEPEVT_Double2000.h
HEPEVT_Double4000.h HEPEVT_Real2000.h HEPEVT_Real4000.h
Using different classes for each of the HEPEVT common block
varieties proved very troublesome - users had trouble and 4
similar classes were being maintained. The new version uses only
static methods and cannot be instantiated (logical since it has
no data members). The HEPEVT common block is contained in the
HepMC/HEPEVT_Common.h header. The precision and number of entries
is specified using #define commands, default is double precision,
2000 entries. The user will see only one change - the IO_HEPEVT
constructor now has no arguments, so he need not define the
any HEPEVT_XXX class. He may need to set the precision and number
of entries. See the header for instructions, and
examples/example_MyPythia.cxx for an example.
example_MyPythia.cxx, example_MyPythiaOnlyToHepMC.cxx,
example_MyPythiaWithEventSelection.cxx are modified to take this
into account.
* HepMC/IO_HEPEVT.h: This class now extracts information from the
fortran HEPEVT common using HEPEVT_Wrapper instead of having to
pass it a class which inherits from the obsolete HEPEVT_BaseClass.
2000-04-03 Matt Dobbs <Matthew.Adam.Dobbs@Cern.CH>
* HepMC/PythiaWrapper5_720.h: Credit for writing the wrapper is
to Silvia Resconi.
Inclusion of HEPEVT wrapper header file is not necessary --- hence
removed.
2000-03-31 Matt Dobbs <Matthew.Adam.Dobbs@Cern.CH>
* HepMC/ParticleData.h: clifetime is now represented in [mm]
instead of [cm] ... previously HepMC had internal inconsistencies
in this --- it claimed to use [cm], but sometimes used [mm] (as
when it read from HEPEVT, and othertimes used [cm] (as when it
transformed a width into a lifetime. Now all is consitent and [mm]
is used everywhere as it should be.
* HepMC/Vertex.h: src/ParticleData.cxx:
Changed comments which say clifetime is in [cm], to say
clifetime is in [mm].
* Makefile (CLHEPdir):
Changed
CLHEPdir = /afs/cern.ch/sw/lhcxx/specific/Linux/CLHEP/pro
to
CLHEPdir = /afs/cern.ch/sw/lhcxx/specific/@sys/CLHEP/dev
to make it platform independent for CERN users.
And some cosmetic changes to the Makefile.
* HepMC/IO_BaseClass.h:
Using the compiler options -ansi -pedantic cause this error:
no match for `::HepMC::IO_Ascii & << ::HepMC::GeneratorEvent *&'
Even though it recognizes:
operator <<(::HepMC::IO_BaseClass &,
const ::HepMC::GeneratorEvent *&) <near match>
as the "best <near match>".
To fix this I make operator<<, operator>> members of the
IO_BaseClass rather than friends, and I add versions where the
argument of operator<< is not constant.
This will not affect users in any way (unless they were using
these compiler options, in which case HepMC didn't work anyway...)
2000-02-16 Matt Dobbs <Matthew.Adam.Dobbs@Cern.CH>
* GeneratorEvent.h: set_signal_process_vertex() modified to ensure
that any vertex specified as signal process is ALSO in the
m_vertices set.
* This change log documents changes since Version 9 of HepMC was
"released" February 11, 2000
pre 2000-02-16 Matt Dobbs <Matthew.Adam.Dobbs@Cern.CH>
Changes Before Version 0.9 (i.e. changes in going from V0.1 -->0.9)
HepMC improvements:
+backup V0.1 (done)
+save particle data as id in Particle (done)
+update IO strategies (done)
+test (done)
+backup (done)
-change set<Vertex*> in event to include all vertices (done)
+change iterators to reflect this (done)
+update IO strategies (done)
+test (done)
-fix all operator= to first destruct dependents. (done)
-access functions to iterate over all flows (done)
-check for stl namespace (done)
grep -n cout HepMC/*.h src/*.cxx | grep -v std::cout |
less
-add Hepevt:write event (done)
-implement lujet strategy (not done!)
-update documentation -- enumerating recent changes. (done)
-user manual written
