diff -ur linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_80211_tx.c linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_80211_tx.c
--- linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_80211_tx.c 2006-09-21 01:26:27.000000000 -0400
+++ linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_80211_tx.c 2006-09-21 01:30:18.000000000 -0400
@@ -69,6 +69,9 @@
iface = netdev_priv(dev);
local = iface->local;
+ if (local->iw_mode == IW_MODE_MONITOR)
+ goto xmit;
+
if (skb->len < ETH_HLEN) {
printk(KERN_DEBUG "%s: hostap_data_start_xmit: short skb "
"(len=%d)\n", dev->name, skb->len);
@@ -234,6 +237,7 @@
memcpy(skb_put(skb, ETH_ALEN), &hdr.addr4, ETH_ALEN);
}
+xmit:
iface->stats.tx_packets++;
iface->stats.tx_bytes += skb->len;
@@ -404,8 +408,6 @@
}
if (skb->len < 24) {
- printk(KERN_DEBUG "%s: hostap_master_start_xmit: short skb "
- "(len=%d)\n", dev->name, skb->len);
ret = 0;
iface->stats.tx_dropped++;
goto fail;
Only in linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap: hostap_cs.c.orig
Only in linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap: hostap_cs.c.rej
diff -ur linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_hw.c linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_hw.c
--- linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_hw.c 2006-09-21 01:26:27.000000000 -0400
+++ linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_hw.c 2006-09-21 01:30:18.000000000 -0400
@@ -1005,6 +1005,35 @@
return fid;
}
+static int prism2_monitor_enable(struct net_device *dev)
+{
+ if (hostap_set_word(dev, HFA384X_RID_CNFPORTTYPE, 5)) {
+ printk(KERN_DEBUG "Port type setting for monitor mode "
+ "failed\n");
+ return -EOPNOTSUPP;
+ }
+
+ if (hfa384x_cmd(dev, HFA384X_CMDCODE_TEST | (0x0a << 8),
+ 0, NULL, NULL)) {
+ printk(KERN_DEBUG "Could not enter testmode 0x0a\n");
+ return -EOPNOTSUPP;
+ }
+
+ if (hostap_set_word(dev, HFA384X_RID_CNFWEPFLAGS,
+ HFA384X_WEPFLAGS_PRIVACYINVOKED |
+ HFA384X_WEPFLAGS_HOSTENCRYPT |
+ HFA384X_WEPFLAGS_HOSTDECRYPT)) {
+ printk(KERN_DEBUG "WEP flags setting failed\n");
+ return -EOPNOTSUPP;
+ }
+
+ if (hostap_set_word(dev, HFA384X_RID_PROMISCUOUSMODE, 1)) {
+ printk(KERN_DEBUG "Could not set promiscuous mode\n");
+ return -EOPNOTSUPP;
+ }
+
+ return 0;
+}
static int prism2_reset_port(struct net_device *dev)
{
@@ -1031,6 +1060,10 @@
"port\n", dev->name);
}
+ if (local->iw_mode == IW_MODE_MONITOR)
+ /* force mode 0x0a after port 0 reset */
+ return prism2_monitor_enable(dev);
+
/* It looks like at least some STA firmware versions reset
* fragmentation threshold back to 2346 after enable command. Restore
* the configured value, if it differs from this default. */
@@ -1466,6 +1499,10 @@
return 1;
}
+ if (local->iw_mode == IW_MODE_MONITOR)
+ /* force mode 0x0a after port 0 reset */
+ prism2_monitor_enable(dev);
+
local->hw_ready = 1;
local->hw_reset_tries = 0;
local->hw_resetting = 0;
@@ -3156,6 +3193,7 @@
local->func->hw_config = prism2_hw_config;
local->func->hw_reset = prism2_hw_reset;
local->func->hw_shutdown = prism2_hw_shutdown;
+ local->func->monitor_enable = prism2_monitor_enable;
local->func->reset_port = prism2_reset_port;
local->func->schedule_reset = prism2_schedule_reset;
#ifdef PRISM2_DOWNLOAD_SUPPORT
Only in linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap: hostap_hw.c.orig
diff -ur linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_ioctl.c linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_ioctl.c
--- linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_ioctl.c 2006-09-21 01:26:27.000000000 -0400
+++ linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_ioctl.c 2006-09-21 01:30:18.000000000 -0400
@@ -1104,33 +1104,7 @@
printk(KERN_DEBUG "Enabling monitor mode\n");
hostap_monitor_set_type(local);
-
- if (hostap_set_word(dev, HFA384X_RID_CNFPORTTYPE,
- HFA384X_PORTTYPE_PSEUDO_IBSS)) {
- printk(KERN_DEBUG "Port type setting for monitor mode "
- "failed\n");
- return -EOPNOTSUPP;
- }
-
- /* Host decrypt is needed to get the IV and ICV fields;
- * however, monitor mode seems to remove WEP flag from frame
- * control field */
- if (hostap_set_word(dev, HFA384X_RID_CNFWEPFLAGS,
- HFA384X_WEPFLAGS_HOSTENCRYPT |
- HFA384X_WEPFLAGS_HOSTDECRYPT)) {
- printk(KERN_DEBUG "WEP flags setting failed\n");
- return -EOPNOTSUPP;
- }
-
- if (local->func->reset_port(dev) ||
- local->func->cmd(dev, HFA384X_CMDCODE_TEST |
- (HFA384X_TEST_MONITOR << 8),
- 0, NULL, NULL)) {
- printk(KERN_DEBUG "Setting monitor mode failed\n");
- return -EOPNOTSUPP;
- }
-
- return 0;
+ return local->func->reset_port(dev);
}
@@ -1199,7 +1173,7 @@
local->iw_mode = *mode;
if (local->iw_mode == IW_MODE_MONITOR)
- hostap_monitor_mode_enable(local);
+ return hostap_monitor_mode_enable(local);
else if (local->iw_mode == IW_MODE_MASTER && !local->host_encrypt &&
!local->fw_encrypt_ok) {
printk(KERN_DEBUG "%s: defaulting to host-based encryption as "
diff -ur linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_main.c linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_main.c
--- linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_main.c 2006-09-21 01:26:27.000000000 -0400
+++ linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_main.c 2006-09-21 01:30:18.000000000 -0400
@@ -331,7 +331,7 @@
if (local->iw_mode == IW_MODE_REPEAT)
return HFA384X_PORTTYPE_WDS;
if (local->iw_mode == IW_MODE_MONITOR)
- return HFA384X_PORTTYPE_PSEUDO_IBSS;
+ return 5; /*HFA384X_PORTTYPE_PSEUDO_IBSS;*/
return HFA384X_PORTTYPE_HOSTAP;
}
Only in linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap: hostap_main.c.orig
diff -ur linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_pci.c linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_pci.c
--- linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_pci.c 2006-09-21 01:26:27.000000000 -0400
+++ linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_pci.c 2006-09-21 01:30:18.000000000 -0400
@@ -48,6 +48,8 @@
{ 0x1260, 0x3873, PCI_ANY_ID, PCI_ANY_ID },
/* Samsung MagicLAN SWL-2210P */
{ 0x167d, 0xa000, PCI_ANY_ID, PCI_ANY_ID },
+ /* NETGEAR MA311 */
+ { 0x1385, 0x3872, PCI_ANY_ID, PCI_ANY_ID },
{ 0 }
};
Only in linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap: hostap_pci.c.orig
diff -ur linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_plx.c linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_plx.c
--- linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_plx.c 2006-09-21 01:26:27.000000000 -0400
+++ linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_plx.c 2006-09-21 01:30:18.000000000 -0400
@@ -101,6 +101,7 @@
{ 0xc250, 0x0002 } /* EMTAC A2424i */,
{ 0xd601, 0x0002 } /* Z-Com XI300 */,
{ 0xd601, 0x0005 } /* Zcomax XI-325H 200mW */,
+ { 0xd601, 0x0010 } /* Zcomax XI-325H 100mW */,
{ 0, 0}
};
Only in linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap: hostap_plx.c.orig
diff -ur linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_wlan.h linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_wlan.h
--- linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_wlan.h 2006-09-21 01:26:27.000000000 -0400
+++ linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_wlan.h 2006-09-21 01:30:18.000000000 -0400
@@ -575,6 +575,7 @@
int (*hw_config)(struct net_device *dev, int initial);
void (*hw_reset)(struct net_device *dev);
void (*hw_shutdown)(struct net_device *dev, int no_disable);
+ int (*monitor_enable)(struct net_device *dev);
int (*reset_port)(struct net_device *dev);
void (*schedule_reset)(local_info_t *local);
int (*download)(local_info_t *local,
