<!--Copyright (C) 1988-2005 by the Institute of Global Environment and Society (IGES). See file COPYRIGHT for more information.-->
<html>
<head>
<title>About GrADS Station Data</title>
</head>
<body bgcolor="e0f0ff" text="#000000">
<h1>About GrADS Station Data</h1>
<p>
This section describes the structure of station data files, how to
create them, and how to instruct GrADS to interpret them properly.
Please refer to the companion section on <a
href="usingstationdata.html">Using Station Data</a> for information
about the GrADS commands and functions that are available for
analyzing and displaying station data.
Here are some quick links for skipping through this section:
<ul>
<li><a href="aboutstationdata.html#station">Structure of a Station Data File</a>
<li><a href="aboutstationdata.html#create">Creating a Station Data File</a>
<li><a href="aboutstationdata.html#descriptor">Station Data Descriptor File</a>
<li><a href="aboutstationdata.html#stnmap">The STNMAP Utility</a>
</ul>
<hr>
<p>
<h2><a name="station">Structure of a Station Data File</a></h2>
<p>
Station data are written to a binary file one report at a time.
Groups of station reports are ordered within the file according to the
time interval. The time interval for a set of upper air soundings
might be 12 hours, and the time interval for a set of surface
observations might be 1 hour.
<p>
Variables within each report are split into two categories: surface
and level-dependent. Surface variables are reported at most once per
report, and level-dependent variable are reported at multiple
pressure levels within each report.
<p>
Each station report in a binary station data file has the following structure:
<ul>
<li>A header which provides information about the location of the station
<li>Surface variables, if any
<li>Level dependent variables, if any
</ul>
<p>
The header is described by the following C language data structure:
<ul>
<pre>
struct reportheader {
char id[8]; /* Station ID */
float lat; /* Latitude of Station */
float lon; /* Longitude of Station */
float t; /* Time in grid-relative units */
int nlev; /* Number of data groups following the header */
int flag; /* Level independent var set flag */
};
</pre>
</ul>
<p>
A detailed description of each header entry follows:
<p>
<ul>
<code>id</code>
<ul>The station ID uniquely identifies the station. It
can be 1 to 7 characters long and may be assigned arbitrarily; ie. the
stations could be numbered in some arbitrary order.</ul>
<p>
<code>lat, lon</code>
<ul>The location of the station, given in world coordinates (latitude
and longitude).</ul>
<p>
<code>t</code>
<ul>The time of this report, in grid-relative units. This refers to
the way the stations are grouped in time. For example, if you are
working with surface airways reports, you would probably have a time
grouping interval of one hour. If you wanted to treat the report
times of each report as being exactly on the hour, you would set t to
0.0. If the report was for 12:15pm, and you were writing the time
group for 12pm, you would set t to be 0.25. Thus, t would typically
have the range of - 0.5 to 0.5. </ul>
<p>
<code>nlev</code>
<ul>Number of data groups following the header. This is the count of
the one surface group, if present, plus the number of level dependent
groups. Is set to zero to mark the end of a time group in the
file. </ul>
<p>
<code>flag</code>
<ul>If set to <code>0</code>, there are no surface variables following
the header. If set to <code>1</code>, then there are surface
variables following the header.</ul>
</ul>
<p>
The surface variable data (if present) are written to file following
the header. Surface variables are written out as floating point
numbers in the order they are listed in the data descriptor file. Each
of the surface variables must be written -- missing variables should
contain the missing data value specified in the data descriptor file.
The group of surface variable data must be the same size for each
report in the file.
<p>
The level-dependent variables are written to file following the surface variables
as follows:
<ul>
<code>level </code>
-- a floating point value giving the Z dimension in world coordinates for this level.
<br>
<code>variables</code>
-- The level-dependent variables for this level.
</ul>
<p>
Each level dependent group must have all the level dependent variables
present, even if they are filled with the missing data value. The
group of level dependent variable data must be the same size for all
levels and all reports in the file.
<p>
After all the reports for one time grouping have been written, a
special header (with no data groups -- <code>nlev</code> set to zero)
is written to indicate the end of the time group. The next time group
may then start immediately after. A time group with no reports would
still contain the time group terminator header record (ie, two
terminators in a row).
<p>
<h2><a name="create">Creating a Station Data File</a></h2>
<p>
GrADS station data files must be written out in the structure outlined
in the previous section. Examples of C and FORTRAN programs to create station
data sets are provided below.
<p>
Let's say you have a data set with monthly rainfall:
<p>
<pre>
Year Month Stid Lat Lon Rainfall
1980 1 QQQ 34.3 -85.5 123.3
1980 1 RRR 44.2 -84.5 87.1
1980 1 SSS 22.4 -83.5 412.8
1980 1 TTT 33.4 -82.5 23.3
1980 2 QQQ 34.3 -85.5 145.1
1980 2 RRR 44.2 -84.5 871.4
1980 2 SSS 22.4 -83.5 223.1
1980 2 TTT 33.4 -82.5 45.5
</pre>
<p>
A sample DEC FORTRAN program to write this data set in GrADS format is
given below. Note that the OPEN statement is set to write a stream
data set. This option may not not available with every compiler. If
your program writes out data in sequential format, you must add an
<code>"OPTIONS sequential"</code> entry to your GrADS data descriptor file.
<p>
<pre>
CHARACTER*8 STID
OPEN (8,NAME='rain.ch')
OPEN (10,NAME='rain.dat',FORM='UNFORMATTED',RECORDTYPE='STREAM')
IFLAG = 0
C Read and Write
10 READ (8,9000,END=90) IYEAR,IMONTH,STID,RLAT,RLON,RVAL
9000 FORMAT (I4,3X,I2,2X,A8,3F8.1)
IF (IFLAG.EQ.0) THEN
IFLAG = 1
IYROLD = IYEAR
IMNOLD = IMONTH
ENDIF
C If new time group, write time group terminator.
C Assuming no empty time groups.
IF (IYROLD.NE.IYEAR.OR.IMNOLD.NE.IMONTH) THEN
NLEV = 0
WRITE (10) STID,RLAT,RLON,TIM,NLEV,NFLAG
ENDIF
IYROLD = IYEAR
IMNOLD = IMONTH
C Write this report
TIM = 0.0
NLEV = 1
NFLAG = 1
WRITE (10) STID,RLAT,RLON,TIM,NLEV,NFLAG
WRITE (10) RVAL
GO TO 10
C On end of file write last time group terminator.
90 CONTINUE
NLEV = 0
WRITE (10) STID,RLAT,RLON,TIM,NLEV,NFLAG
STOP
END
</pre>
<p>
An equivalent C program might be:
<p>
<pre>
#include <stdio.h>
/* Structure that describes a report header in a stn file */
struct rpthdr {
char id[8]; /* Station ID */
float lat; /* Latitude of Station */
float lon; /* Longitude of Station */
float t; /* Time in grid-relative units */
int nlev; /* Number of levels following */
int flag; /* Level independent var set flag */
} hdr;
main ()
{
FILE *ifile, *ofile;
char rec[80];
int flag,year,month,yrsav,mnsav,i;
float val;
/* Open files */
ifile = fopen ("rain.ch","r");
ofile = fopen ("rain.dat","wb");
if (ifile==NULL || ofile==NULL) {
printf("Error opening files\n");
return;
}
/* Read, write loop */
flag = 1;
while (fgets(rec,79,ifile)!=NULL) {
/* Format conversion */
sscanf (rec,"%i %i",&year,&month);
sscanf (rec+20," %g %g %g",&hdr.lat,&hdr.lon,&val);
for (i=0; i<8; i++) hdr.id[i] = rec[i+11];
/* Time group terminator if needed */
if (flag) {
yrsav = year;
mnsav = month;
flag = 0;
}
if (yrsav!=year || mnsav!=month) {
hdr.nlev = 0;
fwrite(&hdr,sizeof(struct rpthdr), 1, ofile);
}
yrsav = year;
mnsav = month;
/* Write this report */
hdr.nlev = 1;
hdr.flag = 1;
hdr.t = 0.0;
fwrite (&hdr,sizeof(struct rpthdr), 1, ofile);
fwrite (&val,sizeof(float), 1, ofile);
}
hdr.nlev = 0;
fwrite (&hdr,sizeof(struct rpthdr), 1, ofile);
}
</pre>
<p>
<h2><a name="descriptor">Station Data Descriptor File</a></h2>
<p>
After creating a binary file containing your station data, you must
write a station data descriptor file so GrADS knows how to interpret
the binary data file. The format for the data descriptor file for
station data is similar to the format for a gridded data set, but
there are a few differences as well as additional entries that are
unique to station data descriptor files. These differences are
outlined below. For further information on all the entries of a
descriptor file, consult the secion of the User's Guide on <a
href="descriptorfile.html">Elements of a GrADS Data
Descriptor File</a>.
<p>
Here is an example of a station data descriptor file. Remember that
the variables must be listed in the same order as they were written to
the binary file.
<p>
<ul>
<pre>
DSET ^station_data_sample.dat
DTYPE station
STNMAP station_data_sample.map
UNDEF -999.0
TITLE Station Data Sample
TDEF 10 linear 12z18jan1992 12hr
VARS 11
ps 0 99 Surface Pressure
ts 0 99 Surface Temperature
ds 0 99 Surface Dewpoint Temperature
us 0 99 Surface U-Wind
vs 0 99 Surface V-Wind
elev 0 99 Elevation of Station
z 1 99 Height
t 1 99 Temperature
d 1 99 Dewpoint Temperature
u 1 99 U-Wind
v 1 99 V-Wind
ENDVARS
</code>
</ul>
<p>
Note the following differences between this descriptor file and a gridded data
descriptor file:
<ul>
<p>
<code>DTYPE station</code>
<ul>This entry identifies the data file as station data.</ul>
<p>
<code>STNMAP <i>filename</i></code>
<ul>This entry identifies the file name of the station map
file created by the <a href="gradutilstnmap.html">
<code>stnmap</code></a> utility.</ul>
<p>
<code>XDEF, YDEF, </code>and <code>ZDEF</code>
<ul>These entries are not included in a station data control file.</ul>
<p>
<code>TDEF</code>
<ul>This entry gives the number of the time groups in the file, the
time stamp for the first group, and the interval between time
groups.</ul>
<p>
<code>VARS</code>
<ul>The surface variables are listed first, and contain a "0" in the
<code><i>levs</i></code> field. Level-dependent variables are listed
after the surface variables, and contain a "1" in the
<code><i>levs</i></code> field.</ul>
</ul>
<p>
<a name="stnmap">
<h3>STNMAP Utility</h3></a>
<p>
Once the station data set has been created and the descriptor file has
been written, the final step is to create the station map file by
running the <a href="gradutilstnmap.html"><code>stnmap</code></a>
utility. This utility is executed externally from the command line,
not from within GrADs. <a
href="gradutilstnmap.html"><code>stnmap</code></a> writes out
information that allows GrADS to access the station report data more
efficiently. The output from <a
href="gradutilstnmap.html"><code>stnmap</code></a> is called the
station map file and its name is identified in the <code>STNMAP</code>
entry of the data descriptor file. <a
href="gradutilstnmap.html"><code>stnmap</code></a> will prompt the
user for the name of the data descriptor file, or it can be specified
as an input argument on the command line. Station map files must be
created on the machine where they are to be used. Consult the <a
href="gradutilstnmap.html">reference page</a> for more information.
<p>
If you change the station data file, perhaps by appending another time group,
then you will also have to change the descriptor file to reflect the
changes and then rerun the <a href="gradutilstnmap.html">
<code>stnmap</code></a> utility.
</ul>
</body>
</html>
