<!-- <?xml version="1.0" ?> <!DOCTYPE chapter PUBLIC "-//KDE//DTD DocBook XML V4.2-Based Variant V1.1//EN" "dtd/kdex.dtd"> To edit or validate this document separately, uncomment this prolog Be sure to comment it out again when you are done --> <chapter id="menu-items"> <chapterinfo> <authorgroup> <author> <firstname>Neil</firstname> <surname>Lucock</surname> <affiliation> <address><email>neil@nlucock.freeserve.co.uk</email></address> </affiliation> </author> <author> <firstname>Krishna</firstname> <surname>Tateneni</surname> <affiliation> <address><email>tateneni@pluto.njcc.com</email></address> </affiliation> </author> <author> <firstname>Anne-Marie</firstname> <surname>Mahfouf</surname> <affiliation> <address><email>annemarie.mahfouf@free.fr</email></address> </affiliation> </author> <!-- TRANS:ROLES_OF_TRANSLATORS --> </authorgroup> </chapterinfo> <title>The Menu and Toolbar Items</title> <para>&stage; presents different types of interfaces for you to interact with the program. Perhaps the most familiar type of interface is the menu which appears on the top of the &stage; window.</para> <para>Clicking on the menu items gives you a list of commands from which you can choose the one you want. Many of the commands can also be accessed directly by holding down &Ctrl; or &Alt; and pressing another key on your keyboard. In the next section, each of the menu commands is described in brief.</para> <sect1 id="toolbars"> <title>The Toolbars</title> <sect2 id="manipulating-toolbars"> <title>Manipulating the Toolbars</title> <para>In addition to the menus, &stage; also has a toolbar. The toolbar consists of a collection of icons. A toolbar icon often presents a convenient shortcut to a command that is found in one of the menus.</para> <para>You can move the unlocked toolbar around by dragging the handle at the left. The unlocked toolbar can be <quote>docked</quote> or attached to any side of the &stage; window. If you like, you can also have the toolbar <quote>float</quote> in its own window, separated from the main &stage; window.</para> <para> If you don't like dragging toolbars around, <mousebutton>right</mousebutton> click on the handle and a menu pops up. </para> <para> Choosing the item <guisubmenu>Text Position</guisubmenu> leads to an additional menu which lets you control the appearance of the items in toolbar. This additional cascading menu is shown in the screenshot below: </para> <screenshot> <screeninfo>Text Position</screeninfo> <mediaobject> <imageobject> <imagedata fileref="barstyle1.png" format="PNG"/> </imageobject> <textobject> <phrase>Text Position</phrase> </textobject> </mediaobject> </screenshot> <para> You can choose to display the toolbar items as text instead of icons, or even to combine both icons and text. If you want both text and icons, the cascading menu allows you to select whether the text appears beside the icons or below them. </para> <para> In icons only view, if you don't know what a particular icon means, you can hold the mouse over the icon, and after a second or so, a little hint pops up in a highlighted text box. </para> <para> The <guilabel>Orientation</guilabel> item in the popup menu has to do with the placement of the toolbar. You can choose any of the four sides of the &stage; window. </para> <para> The &stage; menus are discussed in the following sections. </para> </sect2> </sect1> <sect1 id="file-menu"> <title>File Menu</title> <variablelist> <varlistentry> <term><menuchoice> <shortcut> <keycombo action="simul">&Ctrl;<keycap>N</keycap></keycombo> </shortcut> <guimenu>File</guimenu> <guimenuitem>New</guimenuitem> </menuchoice> </term> <listitem> <para> <action>Begins a new presentation.</action> The startup dialog will open, allowing you to choose a template for your presentation. </para> </listitem> </varlistentry> <varlistentry> <term><menuchoice> <shortcut> <keycombo action="simul">&Ctrl;<keycap>O</keycap></keycombo> </shortcut> <guimenu>File</guimenu> <guimenuitem>Open...</guimenuitem> </menuchoice></term> <listitem> <para> <action>Opens an existing presentation.</action> A standard &kde; file open dialog will appear, allowing you to choose a file to open. </para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <guimenu>File</guimenu> <guisubmenu>Open Recent</guisubmenu> </menuchoice> </term> <listitem> <para> <action>Displays a list of recently opened files for you to choose from.</action> </para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <shortcut><keycombo action="simul"> &Ctrl;<keycap>S</keycap> </keycombo></shortcut> <guimenu>File</guimenu> <guimenuitem>Save</guimenuitem> </menuchoice> </term> <listitem> <para> <action>Saves the currently open presentation.</action> If you have not previously saved it, you will be asked to name the file. If you have previously saved the presentation, it will be resaved with the same name. </para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <guimenu>File</guimenu> <guimenuitem>Save As...</guimenuitem> </menuchoice> </term> <listitem> <para> <action>Saves the currently open presentation with a new name.</action> </para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <guimenu>File</guimenu> <guimenuitem>Reload</guimenuitem> </menuchoice> </term> <listitem> <para>Reload the currently active file. <!-- FIXME: What's a situation when you might want to do this? --> </para> </listitem> </varlistentry> <!-- FIXME: Versions item missing--> <varlistentry> <term><menuchoice> <guimenu>File</guimenu> <guimenuitem>Import...</guimenuitem> </menuchoice> </term> <listitem> <para>Import a presentation that was previously created in one of several common formats.</para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <guimenu>File</guimenu> <guimenuitem>Export...</guimenuitem> </menuchoice> </term> <listitem> <para>Export the currently open presentation to one of several common formats for use in another application, or for exchange with someone who does not have access to &stage;.</para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <guimenu>File</guimenu> <guimenuitem>Mail...</guimenuitem> </menuchoice> </term> <listitem> <para><action>Open</action> a new email message in your selected email client with the current &stage; document attached. </para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <guimenu>File</guimenu> <guimenuitem>Export as HTML...</guimenuitem> </menuchoice> </term> <listitem> <para> <action>Starts the HTML wizard</action>, which is described in the section <xref linkend="html-wizard"/>. </para> </listitem> </varlistentry> <!--FIXME Google Online Document item missing--> <!-- <varlistentry> <term> <menuchoice> <guimenu>Template Manager</guimenu> </menuchoice> </term> <listitem> <para><action>Allows you to save the current slide as a template.</action> In future the template will be available for you to use to build slides with. Creating a template is further discussed in section <xref linkend="creating-templates"/>.</para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <guimenu>File</guimenu> <guimenuitem>Use Current Slide as Default Template</guimenuitem> </menuchoice> </term> <listitem> <para><action>Sets the current slide as your default template</action>. Especially useful if you have created a template of your own to fit into corporate style guidelines, or if you just use a particular layout very often.</para> </listitem> </varlistentry> --> <varlistentry> <term> <menuchoice> <shortcut><keycombo action="simul">&Ctrl;<keycap>P</keycap></keycombo></shortcut> <guimenu>File</guimenu> <guimenuitem>Print...</guimenuitem> </menuchoice></term> <listitem> <para><action>Prints the presentation</action>. More precisely, it opens the print settings dialog, where you can adjust the settings before printing your presentation.</para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <guimenu>File</guimenu> <guimenuitem>Print Preview...</guimenuitem> </menuchoice> </term> <listitem> <para><action>Displays the presentation</action> with a viewer, exactly as it would look if printed.</para> </listitem> </varlistentry> <!--FIXME Export as PDF item missing--> <varlistentry> <term> <menuchoice> <guimenu>File</guimenu> <guimenuitem>Document Information</guimenuitem> </menuchoice> </term> <listitem> <para><action>Allows you to enter information about the document.</action> This includes information about the author, and an abstract on the documents contents.</para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <shortcut> <keycombo action="simul">&Ctrl;<keycap>W</keycap></keycombo></shortcut> <guimenu>File</guimenu> <guimenuitem>Close</guimenuitem> </menuchoice> </term> <listitem> <para><action>Close the current presentation.</action> You will be given an opportunity to save any changes first.</para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <shortcut> <keycombo action="simul">&Ctrl;<keycap>Q</keycap></keycombo></shortcut> <guimenu>File</guimenu> <guimenuitem>Quit</guimenuitem> </menuchoice> </term> <listitem> <para><action>Close</action> &stage;. You will be given an opportunity to save all changes in all open presentations first.</para> </listitem> </varlistentry> </variablelist> </sect1> <sect1 id="edit-menu"> <title>Edit Menu</title> <variablelist> <varlistentry> <term> <menuchoice> <shortcut> <keycombo action="simul">&Ctrl;<keycap>Z</keycap></keycombo></shortcut> <guimenu>Edit</guimenu> <guimenuitem>Undo: <replaceable>Last task</replaceable></guimenuitem> </menuchoice> </term> <listitem> <para><action>Undo the last action you performed.</action></para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <shortcut> <keycombo action="simul">&Ctrl;&Shift;<keycap>Z</keycap></keycombo> </shortcut> <guimenu>Edit</guimenu> <guimenuitem>Redo: <replaceable>Last undone task</replaceable></guimenuitem> </menuchoice></term> <listitem> <para><action>Redo the last action you undid.</action> If you have not undone any actions, or the last undo action is not reversible, this menu item is disabled.</para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <shortcut><keycombo action="simul">&Ctrl;<keycap>X</keycap></keycombo></shortcut> <guimenu>Edit</guimenu> <guimenuitem>Cut</guimenuitem> </menuchoice> </term> <listitem> <para><action>Copy the selected item to the clipboard, and remove it from the document.</action></para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <shortcut> <keycombo action="simul">&Ctrl;<keycap>C</keycap></keycombo></shortcut> <guimenu>Edit</guimenu> <guimenuitem>Copy</guimenuitem> </menuchoice> </term> <listitem> <para><action>Copy the selected item to the clipboard, while leaving it intact in your presentation.</action></para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <shortcut> <keycombo action="simul">&Ctrl;<keycap>V</keycap></keycombo></shortcut> <guimenu>Edit</guimenu> <guimenuitem>Paste</guimenuitem> </menuchoice> </term> <listitem> <para><action>Insert the contents of the clipboard into your presentation.</action></para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <shortcut> <keycombo action="simul">&Ctrl;<keycap>Del</keycap></keycombo></shortcut> <guimenu>Edit</guimenu> <guimenuitem>Delete</guimenuitem> </menuchoice> </term> <listitem> <para><action>Remove the currently selected item from your presentation.</action></para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <shortcut> <keycombo action="simul">&Ctrl;<keycap>A</keycap></keycombo></shortcut> <guimenu>Edit</guimenu> <guimenuitem>Select All</guimenuitem> </menuchoice></term> <listitem> <para> <action>Select all the objects and text on the current slide.</action> </para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <shortcut> <keycombo action="simul">&Ctrl;&Shift;<keycap>A</keycap></keycombo> </shortcut> <guimenu>Edit</guimenu> <guimenuitem>Deselect</guimenuitem> </menuchoice> </term> <listitem> <para>Deselect any currently selected objects.</para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <shortcut> <keycombo action="simul">&Ctrl;<keycap>F</keycap></keycombo></shortcut> <guimenu>Edit</guimenu> <guimenuitem>Find...</guimenuitem> </menuchoice> </term> <listitem> <para> <action>Search for text within the presentation.</action> </para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <shortcut> <keycap>F3</keycap> </shortcut> <guimenu>Edit</guimenu><guimenuitem>Find Next</guimenuitem> </menuchoice> </term> <listitem> <para>Find the next occurrence of a piece of text within a presentation.</para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <shortcut> <keycombo action="simul">&Shift;<keycap>F3</keycap></keycombo> </shortcut> <guimenu>Edit</guimenu><guimenuitem>Find Previous</guimenuitem> </menuchoice> </term> <listitem> <para>Find the previous occurrence of a piece of text within a presentation.</para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <shortcut> <keycombo action="simul">&Ctrl;<keycap>R</keycap></keycombo> </shortcut> <guimenu>Edit</guimenu><guimenuitem>Replace...</guimenuitem> </menuchoice> </term> <listitem> <para>Replace one or more occurrences of a piece of text in your presentation with a different piece of text.</para> </listitem> </varlistentry> <!--FIXME Edit Custom Slide Shows item missing--> <!-- <varlistentry> <term> <menuchoice> <guimenu>Edit</guimenu> <guimenuitem>Duplicate Slide</guimenuitem> </menuchoice> </term> <listitem> <para><action>Insert an exact copy of the current slide.</action></para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <guimenu>Edit</guimenu> <guimenuitem>Duplicate Object...</guimenuitem> </menuchoice> </term> <listitem> <para>Create a duplicate of the currently selected object. A dialog will display allowing you to set some options for the duplicate, ⪚ if it should be rotated, or scaled, or offset to a new position on the slide.</para> </listitem> </varlistentry> --> </variablelist> </sect1> <sect1 id="view-menu"> <title>View Menu</title> <variablelist> <varlistentry> <term> <menuchoice> <guimenu>View</guimenu> <guimenuitem>New View</guimenuitem> </menuchoice></term> <listitem> <para><action>Opens another window with the same presentation loaded</action> so you can work on more than one slide at a time.</para> </listitem> </varlistentry> <!-- <varlistentry> <term> <menuchoice> <shortcut> <keycombo action="simul">&Ctrl;&Shift;<keycap>W</keycap></keycombo></shortcut> <guimenu>View</guimenu> <guimenuitem>Close All Views</guimenuitem> </menuchoice> </term> <listitem> <para><action>Close all views on the presentation.</action> You will be given a chance to save any changes, or to cancel closing.</para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <guimenu>View</guimenu> <guimenuitem>Split View</guimenuitem> </menuchoice> </term> <listitem> <para><action>Splits the window into two (or more) views on the same presentation.</action> The default split is horizontal.</para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <guimenu>View</guimenu> <guimenuitem>Remove View</guimenuitem> </menuchoice> </term> <listitem> <para><action>Close only the currently active view</action>. The presentation, and any other views you have open, remain open, and any changes you have made remain unsaved.</para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <guimenu>View</guimenu> <guisubmenu>Splitter Orientation</guisubmenu> </menuchoice> </term> <listitem> <para><action>Toggle the split view</action> between <guimenuitem>Horizontal</guimenuitem> (the default) and <guimenuitem>Vertical</guimenuitem>.</para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <guimenu>View</guimenu> <guimenuitem>Show Sidebar</guimenuitem> </menuchoice> </term> <listitem> <para><action>Toggle the display of the sidebar</action> where you can see an overview of all the slides in your presentation.</para> </listitem> </varlistentry> --> <varlistentry> <term> <menuchoice> <shortcut><keycombo action="simul">&Ctrl;<keycap>F5</keycap></keycombo></shortcut> <guimenu>View</guimenu> <guimenuitem>Normal</guimenuitem> </menuchoice> <menuchoice> <shortcut><keycombo action="simul">&Ctrl;<keycap>F6</keycap></keycombo></shortcut> <guimenu>View</guimenu> <guimenuitem>Notes</guimenuitem> </menuchoice> <menuchoice> <shortcut><keycombo action="simul">&Ctrl;<keycap>F7</keycap></keycombo></shortcut> <guimenu>View</guimenu> <guimenuitem>Slides Sorter</guimenuitem> </menuchoice> </term> <listitem> <para>Switch with these actions between the view modes Normal, where you edit slides, Notes, which shows a slide preview with a textbox for your annotations for the actual slide and the Slides Sorter view, where you can rename, cut, copy and paste slides and arrange them for your presentation.</para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <shortcut> <keycombo action="simul">&Ctrl;<keycap>F8</keycap></keycombo></shortcut> <guimenu>View</guimenu> <guimenuitem>Show Master Slides</guimenuitem> </menuchoice> </term> <listitem> <para><action>Toggle the display of the slide master</action> where you can put objects that you want to appear on each slide in your presentation.</para> </listitem> </varlistentry> <!-- <varlistentry> <term> <menuchoice> <guimenu>View</guimenu> <guimenuitem>Formatting Characters</guimenuitem> </menuchoice> </term> <listitem> <para>Show a visual representation of <quote>non-printing characters</quote>, such as tabs and paragraph markers. This can be a useful aid to precisely positioning text.</para> <para>This item can be toggled. If enabled, formatting characters are visible; if disabled, they are not.</para> </listitem> </varlistentry> --> <!--FIXME Show Rulers missing--> <varlistentry> <term> <menuchoice> <guimenu>View</guimenu> <guimenuitem>Show Grid</guimenuitem> </menuchoice> </term> <listitem> <para>If enabled, &stage; will display a grid of dots representing the intersections of imaginary horizontal and vertical lines. You can use these dots to precisely position objects on the slide.</para> </listitem> </varlistentry> <varlistentry> <term><menuchoice><guimenu>View</guimenu><guimenuitem> Snap to Grid</guimenuitem></menuchoice> </term> <listitem><para>If this is enabled, when dropping or moving objects on the slide the top left corner of the object will <quote>snap</quote> or move, to the nearest grid point.</para> <para>This does reduce your freedom to freely position objects on the slide, however it also helps to line up objects precisely. It is easily disabled or enabled with this menu entry, allowing you the best of both worlds.</para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <guimenu>View</guimenu> <guimenuitem>Show Guides</guimenuitem> </menuchoice> </term> <listitem> <para>When working in &stage; you can drag a <quote>guide line</quote> from either the horizontal or vertical ruler onto your document. This guide-line will not print or display in the finished presentation, it is simply to help you align objects on screen. If this item is enabled, these guide lines will be visible. If this is disabled, they will not be visible.</para> <para>Guide lines work across slides, allowing you to align objects the same way across multiple slides.</para> <para>Disabling (hiding) guide lines does not delete them. If you have created guide lines, and then disabled this item, enabling it again will retain the guide lines you created.</para> </listitem> </varlistentry> <!-- <varlistentry> <term> <menuchoice> <guimenu>View</guimenu> <guimenuitem>Add Guide Line...</guimenuitem> </menuchoice> </term> <listitem> <para> Opens a dialog to select the <guilabel>Orientation</guilabel> (<guilabel>Horizontal</guilabel> or <guilabel>Vertical</guilabel>) and choose a <guilabel>Position:</guilabel> </para> </listitem> </varlistentry> --> <!--FIXME Zoom In / Zoom Out--> <varlistentry> <term> <menuchoice> <guimenu>View</guimenu> <guisubmenu>Zoom</guisubmenu> </menuchoice> </term> <listitem> <para>This submenu allows you to zoom in or out of the slide. Several predefined zoom levels are available, including <guimenuitem>Fit Page</guimenuitem> to scale the entire slide so as to be visible in the size window you have open, and <guimenuitem>Fit Page Width</guimenuitem> to scale the slide so it fills the entire width of the window, although you may now have to scroll vertically. There are also several other scaling choices, from <guimenuitem>33%</guimenuitem> up to <guimenuitem>500%</guimenuitem>.</para> </listitem> </varlistentry> <!--FIXME Full Screen Mode missing--> </variablelist> </sect1> <sect1 id="insert-menu"> <title>Insert Menu</title> <variablelist> <!-- <varlistentry> <term> <menuchoice> <shortcut> <keycombo action="simul">&Alt;&Shift;<keycap>C</keycap></keycombo> </shortcut> <guimenu>Insert</guimenu> <guimenuitem>Special Character...</guimenuitem> </menuchoice> </term> <listitem> <para>Insert a special character. This might be a character you don't have a key for on your keyboard layout, for instance ü on a US Keyboard.</para> </listitem> </varlistentry> --> <varlistentry> <term> <menuchoice> <guimenu>Insert</guimenu> <guisubmenu>Variable</guisubmenu> </menuchoice> </term> <listitem> <para>Here you can insert a variable that is filled in with a value that may be updated as you update the document.</para> </listitem> </varlistentry> <!-- <varlistentry> <term> <menuchoice> <guimenu>Insert</guimenu> <guimenuitem>Link...</guimenuitem> </menuchoice> </term> <listitem> <para>Insert a hyperlink to a file, a website, or an email address. This enables these locations to be linked to directly from within active presentations, with resources being handled as appropriately by other applications installed on your system.</para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <guimenu>Insert</guimenu> <guimenuitem>Comment...</guimenuitem> </menuchoice> </term> <listitem> <para>Enter a small note that does not display during the real presentation. You might use this to comment on a colleague's text, or to leave a note for yourself about something to do later.</para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <shortcut><keycap>F2</keycap></shortcut> <guimenu>Insert</guimenu> <guimenuitem>Slide...</guimenuitem> </menuchoice> </term> <listitem> <para> <action>Add a new page to your presentation.</action> A dialog will open allowing you to choose a template, and whether to insert the new page before or after the currently selected page. </para> </listitem> </varlistentry> --> <varlistentry> <term> <menuchoice> <guimenu>Insert</guimenu><guimenuitem>Import Slideshow...</guimenuitem> </menuchoice> </term> <listitem> <para><action>Insert an already existing presentation.</action> A standard &kde; file open dialog will appear, allowing you to choose a <guilabel>OpenDocument Presentation</guilabel> (.odp), which will be inserted after the last slide in your current presentation.</para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <guimenu>Insert</guimenu> <guimenuitem>Picture...</guimenuitem> </menuchoice> </term> <listitem> <para>Use this menu item to insert one or more pictures, each is inserted on a new slide. This is useful for the people who want to use &stage; to make a slide show.</para> </listitem> </varlistentry> <!-- <varlistentry> <term> <menuchoice> <shortcut><keycap>F10</keycap></shortcut> <guimenu>Insert</guimenu><guimenuitem>Text</guimenuitem> </menuchoice> </term> <listitem> <para>Add a new text object. Click and drag to create a frame where you wish the text to appear.</para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <guimenu>Insert</guimenu> <guimenuitem>Chart</guimenuitem> </menuchoice> </term> <listitem> <para>Insert a chart. Click and drag to define the size of the chart. Some default data will be displayed. Double click to edit the data and choose the type of chart to display, using the embedded &kchart; editor.</para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <shortcut><keycap>F5</keycap></shortcut> <guimenu>Insert</guimenu><guimenuitem>Table</guimenuitem> </menuchoice> </term> <listitem> <para>Insert a table. Click and drag to define the size of the table.</para> <para>A &kspread; open dialog will display. You may import a spreadsheet that you have saved in one of many formats, including plain text files. You may also choose to create a new and empty table.</para> <para>Double clicking on the table will allow you to edit the contents.</para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <guimenu>Insert</guimenu> <guisubmenu>Object</guisubmenu> </menuchoice> </term> <listitem> <para>An object is an embeddable file, in one of many formats.</para> <para>A common use of this action is to insert scaleable clipart in vector format.</para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <shortcut> <keycombo action="simul">&Shift;<keycap>F5</keycap></keycombo> </shortcut> <guimenu>Insert</guimenu> <guimenuitem>Picture...</guimenuitem> </menuchoice> </term> <listitem> <para><action>Insert a raster image.</action> These are not as easily scaleable as vector images or <quote>clipart</quote>. &stage; currently understands many formats, including <literal role="extension">.tiff</literal>, <literal role="extension">.jpg</literal>, <literal role="extension">.png</literal> and many more.</para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <guimenu>Insert</guimenu> <guisubmenu>Line</guisubmenu> </menuchoice> </term> <listitem> <para>You can insert several types of lines. Line drawing is described further in the drawing tools section.</para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <guimenu>Insert</guimenu> <guisubmenu>Shape</guisubmenu> </menuchoice> </term> <listitem> <para>You can insert several prepared shapes, in vector format. These are editable just like lines you have drawn yourself. Using the drawing tools is described in detail in the drawing tools section.</para> </listitem> </varlistentry> --> <varlistentry> <term> <menuchoice> <guimenu>Insert</guimenu> <guimenuitem>Scan Image...</guimenuitem> </menuchoice> </term> <listitem> <para><action>Scan an image with a scanner.</action> This requires you have a scanner installed. It opens a scan dialog to allow the use of the scanner.</para> </listitem> </varlistentry> </variablelist> </sect1> <sect1 id="format-menu"> <title>Format Menu</title> <variablelist> <!--FIXME Master Slide item missing--> <varlistentry> <term> <menuchoice> <guimenu>Format</guimenu> <guimenuitem>Font...</guimenuitem> </menuchoice> </term> <listitem> <para>The <guilabel>Select Font</guilabel> dialog contains options for selected segments of text.</para> <para>With this dialog, you can <action>change the font, style and size of selected text</action>. The <interface>preview box</interface> at the bottom allows you to <action>approximate changes before you make them</action>. </para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <shortcut> <keycombo action="simul"> &Ctrl;&Alt;<keycap>P</keycap> </keycombo> </shortcut> <guimenu>Format</guimenu> <guimenuitem>Paragraph...</guimenuitem> </menuchoice> </term> <listitem> <para>The <guilabel>Paragraph Format</guilabel> dialog contains settings for larger blocks of text, such as paragraphs. Using this dialog, you can set indenting, line spacing, bullet/numbered list and border settings.</para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <shortcut> <keycombo action="simul">&Ctrl;&Alt;<keycap>S</keycap></keycombo> </shortcut> <guimenu>Format</guimenu> <guimenuitem>Style Manager</guimenuitem> </menuchoice> </term> <listitem> <para>The <guilabel>Style Manager</guilabel> allows you to create an entire set of attributes that will be applied to selected text all at once. </para> </listitem> </varlistentry> <!-- <varlistentry> <term> <menuchoice> <guimenu>Format</guimenu> <guimenuitem>Select</guimenuitem> </menuchoice> </term> <listitem> <para>If you have been using a tool such as the line drawing tool which does not allow you to select other objects, you can use this menu item to return to the normal selection cursor.</para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <guimenu>Format</guimenu> <guimenuitem>Rotate</guimenuitem> </menuchoice> </term> <listitem> <para>Changes the cursor to a double headed curved arrow. Click with the &LMB; onto an object and keep the button pressed. Drag with the cursor to rotate the object on the slide around its center. When you are happy with the position of the object, release the mousebutton to stop rotating.</para> <para>If you change your mind and wish to cancel the rotation, use <menuchoice><guimenu>Edit</guimenu><guimenuitem>Undo</guimenuitem> </menuchoice> to later undo it.</para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <guimenu>Format</guimenu> <guimenuitem>Zoom</guimenuitem> </menuchoice> </term> <listitem> <para>Allow you to zoom in or out in the current slide. You can see the zoom factor in the <guilabel>Edit</guilabel> toolbar, in the zoom indicator.</para> <screenshot> <screeninfo>The <guilabel>zoom factor</guilabel> indicator</screeninfo> <mediaobject> <imageobject> <imagedata format="PNG" fileref="zoomfactor.png"/> </imageobject> <textobject> <phrase>The <guilabel>zoom factor</guilabel> indicator</phrase> </textobject> </mediaobject> </screenshot> <para>Left clicking on the slide will <guimenuitem>Zoom In</guimenuitem>. Right clicking on the current slide will present you a menu to allow you to <guimenuitem>Zoom In</guimenuitem>, to <guimenuitem>Zoom Out</guimenuitem>, to <guimenuitem>Zoom Entire Slide</guimenuitem>, to <guimenuitem>Zoom Slide Width</guimenuitem> or <guimenuitem>Zoom Slide Height</guimenuitem>, to <guimenuitem>Zoom Selected Objects</guimenuitem> or <guimenuitem>Zoom All Objects</guimenuitem> which put back all objects in your view. </para> <para>This action has the same effect as <menuchoice><guimenu>View</guimenu><guimenuitem>Zoom</guimenuitem> </menuchoice> on another form.</para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <guimenu>Format</guimenu> <guimenuitem>Properties</guimenuitem> </menuchoice> </term> <listitem> <para><action>Open</action> the <guilabel>Properties</guilabel> dialog for the currently selected object on your slide.</para> <screenshot> <screeninfo>The <guilabel>Properties</guilabel> dialog</screeninfo> <mediaobject> <imageobject> <imagedata format="PNG" fileref="properties.png"/> </imageobject> <textobject> <phrase>The <guilabel>Properties</guilabel>dialog</phrase> </textobject> </mediaobject> </screenshot> <para>The <guilabel>Properties</guilabel> dialog for an object allows you to manipulate it in a very detailed manner. You can change several properties for the selected object, like the text color if the object is text or the depth if the object is a picture.</para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <guimenu>Format</guimenu> <guisubmenu>Arrange Objects</guisubmenu> </menuchoice> </term> <listitem> <para>This is where you can manipulate the stacking order of objects on the slide.</para> <para>An object that is on top will cover, either partially or fully depending on its size, all other objects beneath it. Meanwhile an object on the bottom of the stack may not be visible at all, as it is covered up by other objects. An object in the middle may be partially covered by other objects, while partially covering yet more objects itself.</para> <para>You can send the selected object down or up a layer, or directly to the top or bottom of the stack.</para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <guimenu>Format</guimenu> <guisubmenu>Align Objects</guisubmenu> </menuchoice> </term> <listitem> <para>In the submenu you can quickly align all the currently selected objects with a side of the slide, or center them either vertically or horizontally.</para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <shortcut> <keycombo action="simul">&Ctrl;<keycap>G</keycap></keycombo> </shortcut> <guimenu>Format</guimenu> <guimenuitem>Group Objects</guimenuitem> </menuchoice> </term> <listitem> <para>If you are drawing, you might want to make something out of several objects. Arrange the individual parts where you want them, select one, then hold down the &Ctrl; key as you click in the others you want to group together. Click <guimenuitem>Group Objects</guimenuitem> and from then on they act as if they are just one thing. It glues things together.</para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <shortcut> <keycombo action="simul">&Ctrl;&Shift;<keycap>G</keycap></keycombo> </shortcut> <guimenu>Format</guimenu> <guimenuitem>Ungroup Objects</guimenuitem> </menuchoice> </term> <listitem> <para>If you decide that you want to alter an object that is made out of several pieces, you can unglue it with this tool. Click somewhere away from the object to deselect it, then click to select one of its parts.</para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <guimenu>Format</guimenu> <guimenuitem>Shadow Objects...</guimenuitem> </menuchoice> </term> <listitem> <para>This puts a colored copy of either text or a drawn object behind it. You can make nice <quote>dropped shadows</quote> for logos with this tool. To enable this item, ensure that you have object(s) selected (you will see the eight small squares around the outline.) You choose the color, select which way the shadow is going to fall and select a distance. For text it looks nice if you set the distance to two or three. Click <guibutton>Apply</guibutton> to see the result of your settings for all selected objects on the slide without leaving the dialog.</para> </listitem> </varlistentry> --> <varlistentry> <term> <menuchoice> <guimenu>Format</guimenu> <guimenuitem>Page Layout...</guimenuitem> </menuchoice></term> <listitem> <para>Allows you to set the page details. You can specify the margins, the orientation, either portrait (higher than wide) or Landscape (wider than high) formats. There are many templates, such as screen, A4, US legal.</para> </listitem> </varlistentry> <!-- <varlistentry> <term> <menuchoice> <guimenu>Format</guimenu> <guimenuitem>Enable/Disable Document Header</guimenuitem> </menuchoice> </term> <listitem> <para><action>Toggle the display of the header field</action> on the current slide. Header content can only be added in the master slide but you can choose to display the header only on some slides with this action.</para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <guimenu>Format</guimenu> <guimenuitem>Enable/Disable Document Footer</guimenuitem> </menuchoice> </term> <listitem> <para><action>Toggle the display of the footer field</action> on the current slide. Footer content can only be added in the master slide but you can choose to display the footer only on some slides with this action.</para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <guimenu>Format</guimenu> <guimenuitem>Slide Background...</guimenuitem> </menuchoice> </term> <listitem> <para>Allows you to alter the background to your presentation slides. Your options are <guilabel>Color/Gradient</guilabel>, (which lets you set either a plain color or one of many gradients) or <guilabel>Picture</guilabel>, which gives a dialog box to find the picture you want. Set the <guilabel>View mode:</guilabel> for this picture to <guilabel>Scaled</guilabel>, <guilabel>Centered</guilabel>, or <guilabel>Tiled</guilabel>.</para> <para> If you want a plain color, click in the box to select it. Gradients only work when you have chosen two colors. The picture option allows you to center the picture, zoom it to cover the entire slide (if it is smaller than the screen, this is very useful) or tile it. This is used when you want a small pattern to repeat across the page . It's probably best used with patterns rather than pictures of logos.</para> <para>You can get rid of a picture by selecting another one or choosing a color/gradient.</para> </listitem> </varlistentry> --> </variablelist> </sect1> <!--FIXME this is now in Format -> Font / Paragraph etc <sect1 id="text-menu"> <title><guimenu>Text</guimenu> Menu</title> <para>This menu modifies selected text and provides a few tools familiar from word processing applications for your convienience for when you are making presentations with large amounts of text in them. The <guimenu>Text</guimenu> menu will only effect selected or highlighted text.</para> <variablelist> <varlistentry> <term> <menuchoice> <guimenu>Text</guimenu> <guimenuitem>Default Format</guimenuitem> </menuchoice> </term> <listitem> <para>Restores selected text to the system default font size, style and formatting.</para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <guimenu>Text</guimenu> <guimenuitem>Color...</guimenuitem> </menuchoice> </term> <listitem> <para>Use the <guilabel>Select Color</guilabel> dialog to have precise control over the color of selected text:</para> <screenshot> <screeninfo>The <guilabel>Select Color</guilabel> dialog</screeninfo> <mediaobject> <imageobject> <imagedata format="PNG" fileref="textmenu2.png"/> </imageobject> <textobject> <phrase>The <guilabel>Select Color</guilabel> dialog</phrase> </textobject> </mediaobject> </screenshot> <para>Using the <interface>color spectrum box</interface> on the left, <action>colors can be precisely defined</action> for use in your document. The color tone can then be adjusted using the <interface>scale</interface> to the right of the spectrum box. The <interface>input boxes</interface> below the color spectrum allow <action>color values to be entered</action>, so that exact colors can be specified.</para> <tip> <para>Use the color picker to select colors from elsewhere in your document (⪚ images).</para> </tip> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <guimenu>Text</guimenu> <guimenuitem>Import Styles...</guimenuitem> </menuchoice> </term> <listitem> <para>Here you can import styles that you have defined in another &stage; document.</para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <guimenu>Text</guimenu> <guisubmenu>Style</guisubmenu> </menuchoice> </term> <listitem> <para>Using this submenu, you can apply a style that you have previously defined to the currently selected text.</para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <guimenu>Text</guimenu> <guimenuitem>Create Style From Selection</guimenuitem> </menuchoice> </term> <listitem> <para>Copy the properties of the currently selected text and save them as a style that you may apply to other text.</para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <guimenu>Text</guimenu> <guisubmenu>Align</guisubmenu> </menuchoice> </term> <listitem> <para><guisubmenu>Align</guisubmenu> has a submenu with several options: <guimenuitem>Align Left</guimenuitem> (<keycombo action="simul">&Alt;<keycap>L</keycap></keycombo>), <guimenuitem>Align Center</guimenuitem> (<keycombo action="simul">&Alt;<keycap>C</keycap></keycombo>), <guimenuitem>Align Right</guimenuitem> (<keycombo action="simul">&Alt;<keycap>R</keycap></keycombo>), and <guimenuitem>Align Block</guimenuitem> (<keycombo action="simul">&Alt;<keycap>J</keycap></keycombo>) which is also commonly known as <quote>Justify</quote>.</para> <para>Text is by default left-aligned.</para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <guimenu>Text</guimenu> <guisubmenu>Type</guisubmenu> </menuchoice> </term> <listitem> <para>Using this submenu, you can format the currently selected text as a list, either of the numbered or bulleted type. If you choose numbered, you can then select a numbering style, and likewise if you choose bulleted, you can choose the style of bullets to use.</para> <para>To change a list back to plain text, select <guimenuitem>None</guimenuitem> as the style.</para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <shortcut> <keycombo action="simul">&Ctrl;<keycap>+</keycap></keycombo> </shortcut> <guimenu>Text</guimenu> <guimenuitem>Increase Depth</guimenuitem> </menuchoice> </term> <term> <menuchoice> <shortcut> <keycombo action="simul">&Ctrl;<keycap>-</keycap></keycombo> </shortcut> <guimenu>Text</guimenu> <guimenuitem>Decrease Depth</guimenuitem> </menuchoice> </term> <listitem> <para><guimenuitem>Increase Depth</guimenuitem> and <guimenuitem>Decrease Depth</guimenuitem> move paragraphs in a list either to the right (<guimenuitem>Increase Depth</guimenuitem>) or back to the left (<guimenuitem>Decrease Depth</guimenuitem>).</para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <guimenu>Text</guimenu> <guimenuitem>Extend Contents to Object Height</guimenuitem> </menuchoice></term> <term> <menuchoice> <guimenu>Text</guimenu> <guimenuitem>Extend Object to Fit Contents</guimenuitem> </menuchoice> </term> <listitem> <para><guimenuitem>Extend Contents to Object Height</guimenuitem> and <guimenuitem>Extend Object to Fit Contents</guimenuitem> help to resize text within the text box or make the text box fit the text you have typed or pasted into it.</para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <guimenu>Text</guimenu> <guimenuitem>Insert Slide Number</guimenuitem> </menuchoice> </term> <listitem> <para>Insert a dynamically-updated slide number. This page number will automatically update when slides are added or removed from your presentation to reflect the correct slide value.</para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <guimenu>Text</guimenu> <guimenuitem>Change Case...</guimenuitem> </menuchoice> </term> <listitem> <para>Presents a dialog that provides a variety of different case/capitalization options for the currently selected text.</para> <para>You may choose between several styles of capitalization, including all lower or uppercase, book style capitalization where each word except conjunctions has an initial capital letter, and sentence style capitalization where the first word in a sentence is capitalized. You can also toggle the case, so that uppercase becomes lowercase, and vice versa.</para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <guimenu>Text</guimenu> <guisubmenu>Spellcheck</guisubmenu> </menuchoice> </term> <listitem> <para>Use this submenu to utilize the spellcheck options. If you enable <guimenuitem>Autospellcheck</guimenuitem>, &stage; will automatically check text that you enter for spelling errors.</para> <para>If you prefer to check spelling explicitly, rather than automatically, you can also force a <guimenuitem>Spelling...</guimenuitem> check here.</para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <guimenu>Text</guimenu> <guisubmenu>Autocorrection</guisubmenu> </menuchoice> </term> <listitem> <para>Use this submenu to utilize autocorrection options. If you <guimenuitem>Enable Autocorrection</guimenuitem>, common spelling errors will be corrected as you type. For example, if you entered <userinput>Teh</userinput>, it would be autocorrected to <userinput>The</userinput>.</para> <para>If the autocorrection feature is not active, you can also <guimenuitem>Apply Autocorrection</guimenuitem> check here.</para> </listitem> </varlistentry> </variablelist> </sect1> --> <sect1 id="slide-menu"> <title>Slide Menu</title> <variablelist> <varlistentry> <term> <menuchoice> <guimenu>Slide</guimenu> <guimenuitem>Insert Slide</guimenuitem> </menuchoice> </term> <listitem> <para><action>Insert a new slide after the current one.</action></para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <guimenu>Slide</guimenu> <guimenuitem>Copy Slide</guimenuitem> </menuchoice> </term> <listitem> <para><action>Copy the current slide to the clipboard.</action></para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <guimenu>Slide</guimenu> <guimenuitem>Delete Slide</guimenuitem> </menuchoice></term> <listitem> <para><action>Delete the current page from the presentation.</action> You will be asked to confirm this action.</para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <shortcut><keycap>PageUp</keycap></shortcut> <guimenu>Slide</guimenu> <guimenuitem>Previous Slide</guimenuitem> </menuchoice> </term> <listitem> <para>Go back to the previous slide in the slide show.</para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <shortcut><keycap>PageDown</keycap></shortcut> <guimenu>Slide</guimenu> <guimenuitem>Next Slide</guimenuitem> </menuchoice> </term> <listitem> <para>Go to the next slide in the slide show.</para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <shortcut><keycombo action="simul">&Ctrl;<keycap>Home</keycap></keycombo></shortcut> <guimenu>Slide</guimenu> <guimenuitem>First Slide</guimenuitem> </menuchoice> </term> <listitem> <para>Go directly to the first slide in the slide show.</para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <shortcut><keycombo action="simul">&Ctrl;<keycap>End</keycap></keycombo></shortcut> <guimenu>Slide</guimenu> <guimenuitem>Last Slide</guimenuitem> </menuchoice> </term> <listitem> <para>Go immediately to the final slide in the slide show.</para> </listitem> </varlistentry> </variablelist> </sect1> <sect1 id="slide-show-menu"> <title>Slide Show Menu</title> <variablelist> <varlistentry> <term> <menuchoice> <shortcut><keycombo action="simul">&Shift;<keycap>F5</keycap></keycombo></shortcut> <guimenu>Slide Show</guimenu> <guisubmenu>Start Presentation</guisubmenu> <guimenuitem>From Current Slide</guimenuitem> </menuchoice> </term> <listitem> <para>Begin the slideshow from the current slide.</para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <shortcut><keycap>F5</keycap></shortcut> <guimenu>Slide Show</guimenu> <guisubmenu>Start Presentation</guisubmenu> <guimenuitem>From First Slide</guimenuitem> </menuchoice> </term> <listitem> <para>Begin the slideshow from the first slide.</para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <guimenu>Slide Show</guimenu> <guimenuitem>Configure Slide Show...</guimenuitem> </menuchoice> </term> <listitem> <para>You can set up the properties for the entire slide show here, including whether to show the duration on screen, which of the slides in a presentation to include, and several other global settings.</para> </listitem> </varlistentry> <!--FIXME Configure Presenter Wiew item mising--> <!-- <varlistentry> <term> <menuchoice> <guimenu>Slide Show</guimenu> <guimenuitem>Edit Object Effect...</guimenuitem> </menuchoice> </term> <listitem> <para>Choose what effect you want to apply for the highlighted object. This is where you can set the order of appearance, how the object will appear, if you want a sound while the object appears and if you want some disappearance effects too.</para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <guimenu>Slide Show</guimenu> <guimenuitem>Edit Slide Transition...</guimenuitem> </menuchoice> </term> <listitem> <para>Apply transition effects to the currently open slide. This is where you can choose how the transition from one slide to the next will be handled.</para> <para>The transition effects you select here are applied on the transition <emphasis>from</emphasis> this slide <emphasis>to</emphasis> the next.</para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <guimenu>Slide Show</guimenu> <guimenuitem>Custom Slide Show...</guimenuitem> </menuchoice> </term> <listitem> <para>Opens a dialog to <guibutton>Add...</guibutton>, <guibutton>Modify...</guibutton>, <guibutton>Remove</guibutton> and <guibutton>Copy</guibutton> slides and <guibutton>Test</guibutton> the slide show in full screen mode.</para> </listitem> </varlistentry> --> </variablelist> </sect1> <sect1 id="settingsmenu"> <title>Settings Menu</title> <para>The <guimenu>Settings</guimenu> menu allows you to customize &stage;.</para> <variablelist> <varlistentry> <term> <menuchoice> <guimenu>Settings</guimenu> <guisubmenu>Show Toolbar</guisubmenu> </menuchoice> </term> <listitem> <para>In this menu you can both enable and disable the display of toolbar.</para> </listitem> </varlistentry> <!--FIXME Dockers item missing --> <!--FIXME Show Status Bar item missing --> <varlistentry> <term> <menuchoice> <guimenu>Settings</guimenu> <guimenuitem>Configure Shortcuts...</guimenuitem> </menuchoice> </term> <listitem> <para><guimenuitem>Configure Shortcuts</guimenuitem> allows you to assign a keyboard shortcut to actions that &stage; menus or icons contain.</para> <screenshot> <screeninfo>Customize Shortcuts</screeninfo> <mediaobject> <imageobject> <imagedata fileref="settings03.png" format="PNG"/> </imageobject> <textobject> <phrase>Customizing the shortcuts</phrase> </textobject> </mediaobject> </screenshot> <para>If you try to assign a shortcut that is already used, it will give you a warning message. Highlight what you want to do (in the picture, I have chosen to make a keyboard shortcut to <guilabel>About KDE</guilabel>).</para> <para>Click the radio button to the <guilabel>Custom</guilabel> key setting and type the key you want to use. I assigned <keycap>Control</keycap> key and <keycap>Y</keycap> to bring up the <quote>About KDE</quote> dialog box.</para> <para>The button shows what has been assigned. Click <guibutton>OK</guibutton> to make the changes, click <guibutton>Default</guibutton> to restore whatever was assigned as default, click <guibutton>Cancel</guibutton> to do nothing and leave the dialog.</para> </listitem> </varlistentry> <varlistentry> <term> <menuchoice> <guimenu>Settings</guimenu> <guimenuitem>Configure Toolbars...</guimenuitem> </menuchoice> </term> <listitem> <para>Configure Toolbars allows you to add or delete icons on each of the toolbars.</para> <screenshot> <screeninfo>Configuring &stage; toolbars</screeninfo> <mediaobject> <imageobject> <imagedata fileref="settings04.png" format="PNG"/> </imageobject> <textobject> <phrase>Configuring &stage; toolbars</phrase> </textobject> </mediaobject> </screenshot> <para>At the top is a drop down box to enable you to choose which toolbar you want to modify. In the picture the <guilabel>File</guilabel> toolbar is selected. If I want to add the <guiicon>Dockers</guiicon> icon to that toolbar, I click the entry in the left window. The arrow pointing right becomes available, if I click the arrow the <guiicon>Dockers</guiicon> entry is added to the selected toolbar. The left arrow is available when you click in the right side window. It allows you to remove an icon from a toolbar. The up and down arrows become active when an item on the right side is selected. You can also move the highlight in the right side window up and down with the keyboard arrow keys. By clicking on the arrows with the mouse you can change the order of the entries in the menu. <!--The <guimenuitem>Configure &kpresenter;...</guimenuitem> menu entry gives two menu boxes. --> </para> </listitem> </varlistentry> <varlistentry> <term><menuchoice> <guimenu>Settings</guimenu> <guimenuitem>Themes</guimenuitem> </menuchoice></term> <listitem><para><action>Choose the color theme for &stage; window.</action> You can choose one of the predefined color schemes or select <guimenuitem>Configuration...</guimenuitem> to open <ulink url="help:/kcontrol/colors">&systemsettings; color selection module</ulink>. </para></listitem> </varlistentry> <varlistentry> <term> <menuchoice> <guimenu>Settings</guimenu> <guimenuitem>Configure Stage...</guimenuitem> </menuchoice> </term> <listitem> <para>See the <link linkend="configure-dialog">Configure &stage;</link> section for a complete explanation of all &stage; settings.</para> </listitem> </varlistentry> </variablelist> </sect1> <sect1 id="helpmenu"> <title>Help Menu</title> &help.menu.documentation; </sect1> </chapter>