diff -Nupr ssmtp-2.64/md5auth/global.h /tmp/ssmtp/ssmtp-2.61/md5auth/global.h --- ssmtp-2.64/md5auth/global.h 2009-11-23 11:45:41.000000000 +0200 +++ /tmp/ssmtp/ssmtp-2.61/md5auth/global.h 1970-01-01 02:00:00.000000000 +0200 @@ -1,24 +0,0 @@ -/* GLOBAL.H - RSAREF types and constants - */ - -/* PROTOTYPES should be set to one if and only if the compiler supports - function argument prototyping. -The following makes PROTOTYPES default to 0 if it has not already - been defined with C compiler flags. - */ -#ifndef PROTOTYPES -#define PROTOTYPES 0 -#endif - -/* POINTER defines a generic pointer type */ -typedef unsigned char *POINTER; - -/* PROTO_LIST is defined depending on how PROTOTYPES is defined above. -If using PROTOTYPES, then PROTO_LIST returns the list, otherwise it - returns an empty list. - */ -#if PROTOTYPES -#define PROTO_LIST(list) list -#else -#define PROTO_LIST(list) () -#endif diff -Nupr ssmtp-2.64/md5auth/hmac.h /tmp/ssmtp/ssmtp-2.61/md5auth/hmac.h --- ssmtp-2.64/md5auth/hmac.h 1970-01-01 02:00:00.000000000 +0200 +++ /tmp/ssmtp/ssmtp-2.61/md5auth/hmac.h 2012-06-30 22:11:27.310570432 +0300 @@ -0,0 +1,41 @@ +/* hmac.h -- hashed message authentication codes + Copyright (C) 2005 Free Software Foundation, Inc. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software Foundation, + Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */ + +/* Written by Simon Josefsson. */ + +#ifndef HMAC_H +# define HMAC_H 1 + +#include <stddef.h> + +/* Compute Hashed Message Authentication Code with MD5, as described + in RFC 2104, over BUFFER data of BUFLEN bytes using the KEY of + KEYLEN bytes, writing the output to pre-allocated 16 byte minimum + RESBUF buffer. Return 0 on success. */ +int +hmac_md5 (const void *key, size_t keylen, + const void *buffer, size_t buflen, void *resbuf); + +/* Compute Hashed Message Authentication Code with SHA-1, over BUFFER + data of BUFLEN bytes using the KEY of KEYLEN bytes, writing the + output to pre-allocated 20 byte minimum RESBUF buffer. Return 0 on + success. */ +int +hmac_sha1 (const void *key, size_t keylen, + const void *in, size_t inlen, void *resbuf); + +#endif /* HMAC_H */ diff -Nupr ssmtp-2.64/md5auth/hmac_md5.c /tmp/ssmtp/ssmtp-2.61/md5auth/hmac_md5.c --- ssmtp-2.64/md5auth/hmac_md5.c 2009-11-23 11:45:41.000000000 +0200 +++ /tmp/ssmtp/ssmtp-2.61/md5auth/hmac_md5.c 1970-01-01 02:00:00.000000000 +0200 @@ -1,73 +0,0 @@ -#include <string.h> -#include <sys/types.h> -#include "global.h" -#include "md5.h" - -/* -** Function: hmac_md5 (RFC 2104) -*/ - -void hmac_md5(unsigned char *text, int text_len, unsigned char *key, - int key_len, unsigned char *digest) -{ - MD5_CTX context; - unsigned char k_ipad[65]; /* inner padding - - * key XORd with ipad - */ - unsigned char k_opad[65]; /* outer padding - - * key XORd with opad - */ - unsigned char tk[16]; - int i; - /* if key is longer than 64 bytes reset it to key=MD5(key) */ - if (key_len > 64) { - - MD5_CTX tctx; - - MD5Init(&tctx); - MD5Update(&tctx, key, key_len); - MD5Final(tk, &tctx); - - key = tk; - key_len = 16; - } - - /* - * the HMAC_MD5 transform looks like: - * - * MD5(K XOR opad, MD5(K XOR ipad, text)) - * - * where K is an n byte key - * ipad is the byte 0x36 repeated 64 times - * opad is the byte 0x5c repeated 64 times - * and text is the data being protected - */ - - /* start out by storing key in pads */ - memset( k_ipad, 0, sizeof k_ipad); - memset( k_opad, 0, sizeof k_opad); - memcpy( k_ipad, key, (size_t)key_len); - memcpy( k_opad, key, (size_t)key_len); - - /* XOR key with ipad and opad values */ - for (i=0; i<64; i++) { - k_ipad[i] ^= 0x36; - k_opad[i] ^= 0x5c; - } - /* - * perform inner MD5 - */ - MD5Init(&context); /* init context for 1st pass */ - MD5Update(&context, k_ipad, 64); /* start with inner pad */ - MD5Update(&context, text, text_len); /* then text of datagram */ - MD5Final(digest, &context); /* finish up 1st pass */ - /* - * perform outer MD5 - */ - MD5Init(&context); /* init context for 2nd - * pass */ - MD5Update(&context, k_opad, 64); /* start with outer pad */ - MD5Update(&context, digest, 16); /* then results of 1st - * hash */ - MD5Final(digest, &context); /* finish up 2nd pass */ -} diff -Nupr ssmtp-2.64/md5auth/hmac-md5.c /tmp/ssmtp/ssmtp-2.61/md5auth/hmac-md5.c --- ssmtp-2.64/md5auth/hmac-md5.c 1970-01-01 02:00:00.000000000 +0200 +++ /tmp/ssmtp/ssmtp-2.61/md5auth/hmac-md5.c 2012-06-30 22:11:27.311575451 +0300 @@ -0,0 +1,83 @@ +/* hmac-md5.c -- hashed message authentication codes + Copyright (C) 2005 Free Software Foundation, Inc. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software Foundation, + Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */ + +/* Written by Simon Josefsson. */ + +#ifdef HAVE_CONFIG_H +# include <config.h> +#endif + +#include "hmac.h" + +#include "memxor.h" +#include "md5.h" + +#include <string.h> + +#define IPAD 0x36 +#define OPAD 0x5c + +int +hmac_md5 (const void *key, size_t keylen, + const void *in, size_t inlen, void *resbuf) +{ + struct md5_ctx inner; + struct md5_ctx outer; + char optkeybuf[16]; + char block[64]; + char innerhash[16]; + + /* Reduce the key's size, so that it becomes <= 64 bytes large. */ + + if (keylen > 64) + { + struct md5_ctx keyhash; + + md5_init_ctx (&keyhash); + md5_process_bytes (key, keylen, &keyhash); + md5_finish_ctx (&keyhash, optkeybuf); + + key = optkeybuf; + keylen = 16; + } + + /* Compute INNERHASH from KEY and IN. */ + + md5_init_ctx (&inner); + + memset (block, IPAD, sizeof (block)); + memxor (block, key, keylen); + + md5_process_block (block, 64, &inner); + md5_process_bytes (in, inlen, &inner); + + md5_finish_ctx (&inner, innerhash); + + /* Compute result from KEY and INNERHASH. */ + + md5_init_ctx (&outer); + + memset (block, OPAD, sizeof (block)); + memxor (block, key, keylen); + + md5_process_block (block, 64, &outer); + md5_process_bytes (innerhash, 16, &outer); + + md5_finish_ctx (&outer, resbuf); + + return 0; +} diff -Nupr ssmtp-2.64/md5auth/hmac_md5.h /tmp/ssmtp/ssmtp-2.61/md5auth/hmac_md5.h --- ssmtp-2.64/md5auth/hmac_md5.h 2002-09-27 15:16:24.000000000 +0300 +++ /tmp/ssmtp/ssmtp-2.61/md5auth/hmac_md5.h 1970-01-01 02:00:00.000000000 +0200 @@ -1,18 +0,0 @@ -#ifndef _HMAC_MD5_H -#define _HMAC_MD5_H -/* prototypes */ - -void hmac_md5( unsigned char* text, int text_len, unsigned char* key, - int key_len, unsigned char* digest); - -/* pointer to data stream */ -/* length of data stream */ -/* pointer to authentication key */ -/* length of authentication key */ -/* caller digest to be filled in */ - -#define MD5_BLOCK_LEN 64 -#define MD5_DIGEST_LEN 16 - -#endif - diff -Nupr ssmtp-2.64/md5auth/md5.c /tmp/ssmtp/ssmtp-2.61/md5auth/md5.c --- ssmtp-2.64/md5auth/md5.c 1970-01-01 02:00:00.000000000 +0200 +++ /tmp/ssmtp/ssmtp-2.61/md5auth/md5.c 2012-06-30 22:11:27.311575451 +0300 @@ -0,0 +1,459 @@ +/* Functions to compute MD5 message digest of files or memory blocks. + according to the definition of MD5 in RFC 1321 from April 1992. + Copyright (C) 1995,1996,1997,1999,2000,2001,2005 + Free Software Foundation, Inc. + This file is part of the GNU C Library. + + This program is free software; you can redistribute it and/or modify it + under the terms of the GNU General Public License as published by the + Free Software Foundation; either version 2, or (at your option) any + later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software Foundation, + Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */ + +/* Written by Ulrich Drepper <drepper@gnu.ai.mit.edu>, 1995. */ + +#ifdef HAVE_CONFIG_H +# include <config.h> +#endif + +#include "md5.h" + +#include <stddef.h> +#include <stdlib.h> +#include <string.h> +#include <sys/types.h> + +#if USE_UNLOCKED_IO +# include "unlocked-io.h" +#endif + +#ifdef _LIBC +# include <endian.h> +# if __BYTE_ORDER == __BIG_ENDIAN +# define WORDS_BIGENDIAN 1 +# endif +/* We need to keep the namespace clean so define the MD5 function + protected using leading __ . */ +# define md5_init_ctx __md5_init_ctx +# define md5_process_block __md5_process_block +# define md5_process_bytes __md5_process_bytes +# define md5_finish_ctx __md5_finish_ctx +# define md5_read_ctx __md5_read_ctx +# define md5_stream __md5_stream +# define md5_buffer __md5_buffer +#endif + +#ifdef WORDS_BIGENDIAN +# define SWAP(n) \ + (((n) << 24) | (((n) & 0xff00) << 8) | (((n) >> 8) & 0xff00) | ((n) >> 24)) +#else +# define SWAP(n) (n) +#endif + +#define BLOCKSIZE 4096 +#if BLOCKSIZE % 64 != 0 +# error "invalid BLOCKSIZE" +#endif + +/* This array contains the bytes used to pad the buffer to the next + 64-byte boundary. (RFC 1321, 3.1: Step 1) */ +static const unsigned char fillbuf[64] = { 0x80, 0 /* , 0, 0, ... */ }; + + +/* Initialize structure containing state of computation. + (RFC 1321, 3.3: Step 3) */ +void +md5_init_ctx (struct md5_ctx *ctx) +{ + ctx->A = 0x67452301; + ctx->B = 0xefcdab89; + ctx->C = 0x98badcfe; + ctx->D = 0x10325476; + + ctx->total[0] = ctx->total[1] = 0; + ctx->buflen = 0; +} + +/* Put result from CTX in first 16 bytes following RESBUF. The result + must be in little endian byte order. + + IMPORTANT: On some systems it is required that RESBUF is correctly + aligned for a 32 bits value. */ +void * +md5_read_ctx (const struct md5_ctx *ctx, void *resbuf) +{ + ((uint32_t *) resbuf)[0] = SWAP (ctx->A); + ((uint32_t *) resbuf)[1] = SWAP (ctx->B); + ((uint32_t *) resbuf)[2] = SWAP (ctx->C); + ((uint32_t *) resbuf)[3] = SWAP (ctx->D); + + return resbuf; +} + +/* Process the remaining bytes in the internal buffer and the usual + prolog according to the standard and write the result to RESBUF. + + IMPORTANT: On some systems it is required that RESBUF is correctly + aligned for a 32 bits value. */ +void * +md5_finish_ctx (struct md5_ctx *ctx, void *resbuf) +{ + /* Take yet unprocessed bytes into account. */ + uint32_t bytes = ctx->buflen; + size_t size = (bytes < 56) ? 64 / 4 : 64 * 2 / 4; + + /* Now count remaining bytes. */ + ctx->total[0] += bytes; + if (ctx->total[0] < bytes) + ++ctx->total[1]; + + /* Put the 64-bit file length in *bits* at the end of the buffer. */ + ctx->buffer[size - 2] = SWAP (ctx->total[0] << 3); + ctx->buffer[size - 1] = SWAP ((ctx->total[1] << 3) | (ctx->total[0] >> 29)); + + memcpy (&((char *) ctx->buffer)[bytes], fillbuf, (size - 2) * 4 - bytes); + + /* Process last bytes. */ + md5_process_block (ctx->buffer, size * 4, ctx); + + return md5_read_ctx (ctx, resbuf); +} + +/* Compute MD5 message digest for bytes read from STREAM. The + resulting message digest number will be written into the 16 bytes + beginning at RESBLOCK. */ +int +md5_stream (FILE *stream, void *resblock) +{ + struct md5_ctx ctx; + char buffer[BLOCKSIZE + 72]; + size_t sum; + + /* Initialize the computation context. */ + md5_init_ctx (&ctx); + + /* Iterate over full file contents. */ + while (1) + { + /* We read the file in blocks of BLOCKSIZE bytes. One call of the + computation function processes the whole buffer so that with the + next round of the loop another block can be read. */ + size_t n; + sum = 0; + + /* Read block. Take care for partial reads. */ + while (1) + { + n = fread (buffer + sum, 1, BLOCKSIZE - sum, stream); + + sum += n; + + if (sum == BLOCKSIZE) + break; + + if (n == 0) + { + /* Check for the error flag IFF N == 0, so that we don't + exit the loop after a partial read due to e.g., EAGAIN + or EWOULDBLOCK. */ + if (ferror (stream)) + return 1; + goto process_partial_block; + } + + /* We've read at least one byte, so ignore errors. But always + check for EOF, since feof may be true even though N > 0. + Otherwise, we could end up calling fread after EOF. */ + if (feof (stream)) + goto process_partial_block; + } + + /* Process buffer with BLOCKSIZE bytes. Note that + BLOCKSIZE % 64 == 0 + */ + md5_process_block (buffer, BLOCKSIZE, &ctx); + } + +process_partial_block: + + /* Process any remaining bytes. */ + if (sum > 0) + md5_process_bytes (buffer, sum, &ctx); + + /* Construct result in desired memory. */ + md5_finish_ctx (&ctx, resblock); + return 0; +} + +/* Compute MD5 message digest for LEN bytes beginning at BUFFER. The + result is always in little endian byte order, so that a byte-wise + output yields to the wanted ASCII representation of the message + digest. */ +void * +md5_buffer (const char *buffer, size_t len, void *resblock) +{ + struct md5_ctx ctx; + + /* Initialize the computation context. */ + md5_init_ctx (&ctx); + + /* Process whole buffer but last len % 64 bytes. */ + md5_process_bytes (buffer, len, &ctx); + + /* Put result in desired memory area. */ + return md5_finish_ctx (&ctx, resblock); +} + + +void +md5_process_bytes (const void *buffer, size_t len, struct md5_ctx *ctx) +{ + /* When we already have some bits in our internal buffer concatenate + both inputs first. */ + if (ctx->buflen != 0) + { + size_t left_over = ctx->buflen; + size_t add = 128 - left_over > len ? len : 128 - left_over; + + memcpy (&((char *) ctx->buffer)[left_over], buffer, add); + ctx->buflen += add; + + if (ctx->buflen > 64) + { + md5_process_block (ctx->buffer, ctx->buflen & ~63, ctx); + + ctx->buflen &= 63; + /* The regions in the following copy operation cannot overlap. */ + memcpy (ctx->buffer, + &((char *) ctx->buffer)[(left_over + add) & ~63], + ctx->buflen); + } + + buffer = (const char *) buffer + add; + len -= add; + } + + /* Process available complete blocks. */ + if (len >= 64) + { +#if !_STRING_ARCH_unaligned +/* To check alignment gcc has an appropriate operator. Other + compilers don't. */ +# if __GNUC__ >= 2 +# define UNALIGNED_P(p) (((uintptr_t) p) % __alignof__ (uint32_t) != 0) +# else +# define alignof(type) offsetof (struct { char c; type x; }, x) +# define UNALIGNED_P(p) (((size_t) p) % alignof (uint32_t) != 0) +# endif + if (UNALIGNED_P (buffer)) + while (len > 64) + { + md5_process_block (memcpy (ctx->buffer, buffer, 64), 64, ctx); + buffer = (const char *) buffer + 64; + len -= 64; + } + else +#endif + { + md5_process_block (buffer, len & ~63, ctx); + buffer = (const char *) buffer + (len & ~63); + len &= 63; + } + } + + /* Move remaining bytes in internal buffer. */ + if (len > 0) + { + size_t left_over = ctx->buflen; + + memcpy (&((char *) ctx->buffer)[left_over], buffer, len); + left_over += len; + if (left_over >= 64) + { + md5_process_block (ctx->buffer, 64, ctx); + left_over -= 64; + memcpy (ctx->buffer, &ctx->buffer[16], left_over); + } + ctx->buflen = left_over; + } +} + + +/* These are the four functions used in the four steps of the MD5 algorithm + and defined in the RFC 1321. The first function is a little bit optimized + (as found in Colin Plumbs public domain implementation). */ +/* #define FF(b, c, d) ((b & c) | (~b & d)) */ +#define FF(b, c, d) (d ^ (b & (c ^ d))) +#define FG(b, c, d) FF (d, b, c) +#define FH(b, c, d) (b ^ c ^ d) +#define FI(b, c, d) (c ^ (b | ~d)) + +/* Process LEN bytes of BUFFER, accumulating context into CTX. + It is assumed that LEN % 64 == 0. */ + +void +md5_process_block (const void *buffer, size_t len, struct md5_ctx *ctx) +{ + uint32_t correct_words[16]; + const uint32_t *words = buffer; + size_t nwords = len / sizeof (uint32_t); + const uint32_t *endp = words + nwords; + uint32_t A = ctx->A; + uint32_t B = ctx->B; + uint32_t C = ctx->C; + uint32_t D = ctx->D; + + /* First increment the byte count. RFC 1321 specifies the possible + length of the file up to 2^64 bits. Here we only compute the + number of bytes. Do a double word increment. */ + ctx->total[0] += len; + if (ctx->total[0] < len) + ++ctx->total[1]; + + /* Process all bytes in the buffer with 64 bytes in each round of + the loop. */ + while (words < endp) + { + uint32_t *cwp = correct_words; + uint32_t A_save = A; + uint32_t B_save = B; + uint32_t C_save = C; + uint32_t D_save = D; + + /* First round: using the given function, the context and a constant + the next context is computed. Because the algorithms processing + unit is a 32-bit word and it is determined to work on words in + little endian byte order we perhaps have to change the byte order + before the computation. To reduce the work for the next steps + we store the swapped words in the array CORRECT_WORDS. */ + +#define OP(a, b, c, d, s, T) \ + do \ + { \ + a += FF (b, c, d) + (*cwp++ = SWAP (*words)) + T; \ + ++words; \ + CYCLIC (a, s); \ + a += b; \ + } \ + while (0) + + /* It is unfortunate that C does not provide an operator for + cyclic rotation. Hope the C compiler is smart enough. */ +#define CYCLIC(w, s) (w = (w << s) | (w >> (32 - s))) + + /* Before we start, one word to the strange constants. + They are defined in RFC 1321 as + + T[i] = (int) (4294967296.0 * fabs (sin (i))), i=1..64 + + Here is an equivalent invocation using Perl: + + perl -e 'foreach(1..64){printf "0x%08x\n", int (4294967296 * abs (sin $_))}' + */ + + /* Round 1. */ + OP (A, B, C, D, 7, 0xd76aa478); + OP (D, A, B, C, 12, 0xe8c7b756); + OP (C, D, A, B, 17, 0x242070db); + OP (B, C, D, A, 22, 0xc1bdceee); + OP (A, B, C, D, 7, 0xf57c0faf); + OP (D, A, B, C, 12, 0x4787c62a); + OP (C, D, A, B, 17, 0xa8304613); + OP (B, C, D, A, 22, 0xfd469501); + OP (A, B, C, D, 7, 0x698098d8); + OP (D, A, B, C, 12, 0x8b44f7af); + OP (C, D, A, B, 17, 0xffff5bb1); + OP (B, C, D, A, 22, 0x895cd7be); + OP (A, B, C, D, 7, 0x6b901122); + OP (D, A, B, C, 12, 0xfd987193); + OP (C, D, A, B, 17, 0xa679438e); + OP (B, C, D, A, 22, 0x49b40821); + + /* For the second to fourth round we have the possibly swapped words + in CORRECT_WORDS. Redefine the macro to take an additional first + argument specifying the function to use. */ +#undef OP +#define OP(f, a, b, c, d, k, s, T) \ + do \ + { \ + a += f (b, c, d) + correct_words[k] + T; \ + CYCLIC (a, s); \ + a += b; \ + } \ + while (0) + + /* Round 2. */ + OP (FG, A, B, C, D, 1, 5, 0xf61e2562); + OP (FG, D, A, B, C, 6, 9, 0xc040b340); + OP (FG, C, D, A, B, 11, 14, 0x265e5a51); + OP (FG, B, C, D, A, 0, 20, 0xe9b6c7aa); + OP (FG, A, B, C, D, 5, 5, 0xd62f105d); + OP (FG, D, A, B, C, 10, 9, 0x02441453); + OP (FG, C, D, A, B, 15, 14, 0xd8a1e681); + OP (FG, B, C, D, A, 4, 20, 0xe7d3fbc8); + OP (FG, A, B, C, D, 9, 5, 0x21e1cde6); + OP (FG, D, A, B, C, 14, 9, 0xc33707d6); + OP (FG, C, D, A, B, 3, 14, 0xf4d50d87); + OP (FG, B, C, D, A, 8, 20, 0x455a14ed); + OP (FG, A, B, C, D, 13, 5, 0xa9e3e905); + OP (FG, D, A, B, C, 2, 9, 0xfcefa3f8); + OP (FG, C, D, A, B, 7, 14, 0x676f02d9); + OP (FG, B, C, D, A, 12, 20, 0x8d2a4c8a); + + /* Round 3. */ + OP (FH, A, B, C, D, 5, 4, 0xfffa3942); + OP (FH, D, A, B, C, 8, 11, 0x8771f681); + OP (FH, C, D, A, B, 11, 16, 0x6d9d6122); + OP (FH, B, C, D, A, 14, 23, 0xfde5380c); + OP (FH, A, B, C, D, 1, 4, 0xa4beea44); + OP (FH, D, A, B, C, 4, 11, 0x4bdecfa9); + OP (FH, C, D, A, B, 7, 16, 0xf6bb4b60); + OP (FH, B, C, D, A, 10, 23, 0xbebfbc70); + OP (FH, A, B, C, D, 13, 4, 0x289b7ec6); + OP (FH, D, A, B, C, 0, 11, 0xeaa127fa); + OP (FH, C, D, A, B, 3, 16, 0xd4ef3085); + OP (FH, B, C, D, A, 6, 23, 0x04881d05); + OP (FH, A, B, C, D, 9, 4, 0xd9d4d039); + OP (FH, D, A, B, C, 12, 11, 0xe6db99e5); + OP (FH, C, D, A, B, 15, 16, 0x1fa27cf8); + OP (FH, B, C, D, A, 2, 23, 0xc4ac5665); + + /* Round 4. */ + OP (FI, A, B, C, D, 0, 6, 0xf4292244); + OP (FI, D, A, B, C, 7, 10, 0x432aff97); + OP (FI, C, D, A, B, 14, 15, 0xab9423a7); + OP (FI, B, C, D, A, 5, 21, 0xfc93a039); + OP (FI, A, B, C, D, 12, 6, 0x655b59c3); + OP (FI, D, A, B, C, 3, 10, 0x8f0ccc92); + OP (FI, C, D, A, B, 10, 15, 0xffeff47d); + OP (FI, B, C, D, A, 1, 21, 0x85845dd1); + OP (FI, A, B, C, D, 8, 6, 0x6fa87e4f); + OP (FI, D, A, B, C, 15, 10, 0xfe2ce6e0); + OP (FI, C, D, A, B, 6, 15, 0xa3014314); + OP (FI, B, C, D, A, 13, 21, 0x4e0811a1); + OP (FI, A, B, C, D, 4, 6, 0xf7537e82); + OP (FI, D, A, B, C, 11, 10, 0xbd3af235); + OP (FI, C, D, A, B, 2, 15, 0x2ad7d2bb); + OP (FI, B, C, D, A, 9, 21, 0xeb86d391); + + /* Add the starting values of the context. */ + A += A_save; + B += B_save; + C += C_save; + D += D_save; + } + + /* Put checksum in context given as argument. */ + ctx->A = A; + ctx->B = B; + ctx->C = C; + ctx->D = D; +} diff -Nupr ssmtp-2.64/md5auth/md5c.c /tmp/ssmtp/ssmtp-2.61/md5auth/md5c.c --- ssmtp-2.64/md5auth/md5c.c 2009-11-23 11:45:41.000000000 +0200 +++ /tmp/ssmtp/ssmtp-2.61/md5auth/md5c.c 1970-01-01 02:00:00.000000000 +0200 @@ -1,334 +0,0 @@ -/* MD5C.C - RSA Data Security, Inc., MD5 message-digest algorithm - */ - -/* Copyright (C) 1991-2, RSA Data Security, Inc. Created 1991. All -rights reserved. - -License to copy and use this software is granted provided that it -is identified as the "RSA Data Security, Inc. MD5 Message-Digest -Algorithm" in all material mentioning or referencing this software -or this function. - -License is also granted to make and use derivative works provided -that such works are identified as "derived from the RSA Data -Security, Inc. MD5 Message-Digest Algorithm" in all material -mentioning or referencing the derived work. - -RSA Data Security, Inc. makes no representations concerning either -the merchantability of this software or the suitability of this -software for any particular purpose. It is provided "as is" -without express or implied warranty of any kind. - -These notices must be retained in any copies of any part of this -documentation and/or software. - */ - -#include <sys/types.h> -#include "global.h" -#include "md5.h" - -/* Constants for MD5Transform routine. - */ -#define S11 7 -#define S12 12 -#define S13 17 -#define S14 22 -#define S21 5 -#define S22 9 -#define S23 14 -#define S24 20 -#define S31 4 -#define S32 11 -#define S33 16 -#define S34 23 -#define S41 6 -#define S42 10 -#define S43 15 -#define S44 21 - -static void MD5Transform PROTO_LIST ((u_int32_t [4], unsigned char [64])); -static void Encode PROTO_LIST - ((unsigned char *, u_int32_t *, unsigned int)); -static void Decode PROTO_LIST - ((u_int32_t *, unsigned char *, unsigned int)); -static void MD5_memcpy PROTO_LIST ((POINTER, POINTER, unsigned int)); -static void MD5_memset PROTO_LIST ((POINTER, int, unsigned int)); - -static unsigned char PADDING[64] = { - 0x80, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -}; - -/* F, G, H and I are basic MD5 functions. - */ -#define F(x, y, z) (((x) & (y)) | ((~x) & (z))) -#define G(x, y, z) (((x) & (z)) | ((y) & (~z))) -#define H(x, y, z) ((x) ^ (y) ^ (z)) -#define I(x, y, z) ((y) ^ ((x) | (~z))) - -/* ROTATE_LEFT rotates x left n bits. - */ -#define ROTATE_LEFT(x, n) (((x) << (n)) | ((x) >> (32-(n)))) - -/* FF, GG, HH, and II transformations for rounds 1, 2, 3, and 4. -Rotation is separate from addition to prevent recomputation. - */ -#define FF(a, b, c, d, x, s, ac) { \ - (a) += F ((b), (c), (d)) + (x) + (u_int32_t)(ac); \ - (a) = ROTATE_LEFT ((a), (s)); \ - (a) += (b); \ - } -#define GG(a, b, c, d, x, s, ac) { \ - (a) += G ((b), (c), (d)) + (x) + (u_int32_t)(ac); \ - (a) = ROTATE_LEFT ((a), (s)); \ - (a) += (b); \ - } -#define HH(a, b, c, d, x, s, ac) { \ - (a) += H ((b), (c), (d)) + (x) + (u_int32_t)(ac); \ - (a) = ROTATE_LEFT ((a), (s)); \ - (a) += (b); \ - } -#define II(a, b, c, d, x, s, ac) { \ - (a) += I ((b), (c), (d)) + (x) + (u_int32_t)(ac); \ - (a) = ROTATE_LEFT ((a), (s)); \ - (a) += (b); \ - } - -/* MD5 initialization. Begins an MD5 operation, writing a new context. - */ -void MD5Init (context) -MD5_CTX *context; /* context */ -{ - context->count[0] = context->count[1] = 0; - /* Load magic initialization constants. -*/ - context->state[0] = 0x67452301; - context->state[1] = 0xefcdab89; - context->state[2] = 0x98badcfe; - context->state[3] = 0x10325476; -} - -/* MD5 block update operation. Continues an MD5 message-digest - operation, processing another message block, and updating the - context. - */ -void MD5Update (context, input, inputLen) -MD5_CTX *context; /* context */ -unsigned char *input; /* input block */ -unsigned int inputLen; /* length of input block */ -{ - unsigned int i, index, partLen; - - /* Compute number of bytes mod 64 */ - index = (unsigned int)((context->count[0] >> 3) & 0x3F); - - /* Update number of bits */ - if ((context->count[0] += ((u_int32_t)inputLen << 3)) - < ((u_int32_t)inputLen << 3)) - context->count[1]++; - context->count[1] += ((u_int32_t)inputLen >> 29); - - partLen = 64 - index; - - /* Transform as many times as possible. -*/ - if (inputLen >= partLen) { - MD5_memcpy - ((POINTER)&context->buffer[index], (POINTER)input, partLen); - MD5Transform (context->state, context->buffer); - - for (i = partLen; i + 63 < inputLen; i += 64) - MD5Transform (context->state, &input[i]); - - index = 0; - } - else - i = 0; - - /* Buffer remaining input */ - MD5_memcpy - ((POINTER)&context->buffer[index], (POINTER)&input[i], - inputLen-i); -} - -/* MD5 finalization. Ends an MD5 message-digest operation, writing the - the message digest and zeroizing the context. - */ -void MD5Final (digest, context) -unsigned char digest[16]; /* message digest */ -MD5_CTX *context; /* context */ -{ - unsigned char bits[8]; - unsigned int index, padLen; - - /* Save number of bits */ - Encode (bits, context->count, 8); - - /* Pad out to 56 mod 64. -*/ - index = (unsigned int)((context->count[0] >> 3) & 0x3f); - padLen = (index < 56) ? (56 - index) : (120 - index); - MD5Update (context, PADDING, padLen); - - /* Append length (before padding) */ - MD5Update (context, bits, 8); - /* Store state in digest */ - Encode (digest, context->state, 16); - - /* Zeroize sensitive information. -*/ - MD5_memset ((POINTER)context, 0, sizeof (*context)); -} - -/* MD5 basic transformation. Transforms state based on block. - */ -static void MD5Transform (state, block) -u_int32_t state[4]; -unsigned char block[64]; -{ - u_int32_t a = state[0], b = state[1], c = state[2], d = state[3], x[16]; - - Decode (x, block, 64); - - /* Round 1 */ - FF (a, b, c, d, x[ 0], S11, 0xd76aa478); /* 1 */ - FF (d, a, b, c, x[ 1], S12, 0xe8c7b756); /* 2 */ - FF (c, d, a, b, x[ 2], S13, 0x242070db); /* 3 */ - FF (b, c, d, a, x[ 3], S14, 0xc1bdceee); /* 4 */ - FF (a, b, c, d, x[ 4], S11, 0xf57c0faf); /* 5 */ - FF (d, a, b, c, x[ 5], S12, 0x4787c62a); /* 6 */ - FF (c, d, a, b, x[ 6], S13, 0xa8304613); /* 7 */ - FF (b, c, d, a, x[ 7], S14, 0xfd469501); /* 8 */ - FF (a, b, c, d, x[ 8], S11, 0x698098d8); /* 9 */ - FF (d, a, b, c, x[ 9], S12, 0x8b44f7af); /* 10 */ - FF (c, d, a, b, x[10], S13, 0xffff5bb1); /* 11 */ - FF (b, c, d, a, x[11], S14, 0x895cd7be); /* 12 */ - FF (a, b, c, d, x[12], S11, 0x6b901122); /* 13 */ - FF (d, a, b, c, x[13], S12, 0xfd987193); /* 14 */ - FF (c, d, a, b, x[14], S13, 0xa679438e); /* 15 */ - FF (b, c, d, a, x[15], S14, 0x49b40821); /* 16 */ - - /* Round 2 */ - GG (a, b, c, d, x[ 1], S21, 0xf61e2562); /* 17 */ - GG (d, a, b, c, x[ 6], S22, 0xc040b340); /* 18 */ - GG (c, d, a, b, x[11], S23, 0x265e5a51); /* 19 */ - GG (b, c, d, a, x[ 0], S24, 0xe9b6c7aa); /* 20 */ - GG (a, b, c, d, x[ 5], S21, 0xd62f105d); /* 21 */ - GG (d, a, b, c, x[10], S22, 0x2441453); /* 22 */ - GG (c, d, a, b, x[15], S23, 0xd8a1e681); /* 23 */ - GG (b, c, d, a, x[ 4], S24, 0xe7d3fbc8); /* 24 */ - GG (a, b, c, d, x[ 9], S21, 0x21e1cde6); /* 25 */ - GG (d, a, b, c, x[14], S22, 0xc33707d6); /* 26 */ - GG (c, d, a, b, x[ 3], S23, 0xf4d50d87); /* 27 */ - GG (b, c, d, a, x[ 8], S24, 0x455a14ed); /* 28 */ - GG (a, b, c, d, x[13], S21, 0xa9e3e905); /* 29 */ - GG (d, a, b, c, x[ 2], S22, 0xfcefa3f8); /* 30 */ - GG (c, d, a, b, x[ 7], S23, 0x676f02d9); /* 31 */ - GG (b, c, d, a, x[12], S24, 0x8d2a4c8a); /* 32 */ - - /* Round 3 */ - HH (a, b, c, d, x[ 5], S31, 0xfffa3942); /* 33 */ - HH (d, a, b, c, x[ 8], S32, 0x8771f681); /* 34 */ - HH (c, d, a, b, x[11], S33, 0x6d9d6122); /* 35 */ - HH (b, c, d, a, x[14], S34, 0xfde5380c); /* 36 */ - HH (a, b, c, d, x[ 1], S31, 0xa4beea44); /* 37 */ - HH (d, a, b, c, x[ 4], S32, 0x4bdecfa9); /* 38 */ - HH (c, d, a, b, x[ 7], S33, 0xf6bb4b60); /* 39 */ - HH (b, c, d, a, x[10], S34, 0xbebfbc70); /* 40 */ - HH (a, b, c, d, x[13], S31, 0x289b7ec6); /* 41 */ - HH (d, a, b, c, x[ 0], S32, 0xeaa127fa); /* 42 */ - HH (c, d, a, b, x[ 3], S33, 0xd4ef3085); /* 43 */ - HH (b, c, d, a, x[ 6], S34, 0x4881d05); /* 44 */ - HH (a, b, c, d, x[ 9], S31, 0xd9d4d039); /* 45 */ - HH (d, a, b, c, x[12], S32, 0xe6db99e5); /* 46 */ - HH (c, d, a, b, x[15], S33, 0x1fa27cf8); /* 47 */ - HH (b, c, d, a, x[ 2], S34, 0xc4ac5665); /* 48 */ - - /* Round 4 */ - II (a, b, c, d, x[ 0], S41, 0xf4292244); /* 49 */ - II (d, a, b, c, x[ 7], S42, 0x432aff97); /* 50 */ - II (c, d, a, b, x[14], S43, 0xab9423a7); /* 51 */ - II (b, c, d, a, x[ 5], S44, 0xfc93a039); /* 52 */ - II (a, b, c, d, x[12], S41, 0x655b59c3); /* 53 */ - II (d, a, b, c, x[ 3], S42, 0x8f0ccc92); /* 54 */ - II (c, d, a, b, x[10], S43, 0xffeff47d); /* 55 */ - II (b, c, d, a, x[ 1], S44, 0x85845dd1); /* 56 */ - II (a, b, c, d, x[ 8], S41, 0x6fa87e4f); /* 57 */ - II (d, a, b, c, x[15], S42, 0xfe2ce6e0); /* 58 */ - II (c, d, a, b, x[ 6], S43, 0xa3014314); /* 59 */ - II (b, c, d, a, x[13], S44, 0x4e0811a1); /* 60 */ - II (a, b, c, d, x[ 4], S41, 0xf7537e82); /* 61 */ - II (d, a, b, c, x[11], S42, 0xbd3af235); /* 62 */ - II (c, d, a, b, x[ 2], S43, 0x2ad7d2bb); /* 63 */ - II (b, c, d, a, x[ 9], S44, 0xeb86d391); /* 64 */ - - state[0] += a; - state[1] += b; - state[2] += c; - state[3] += d; - - /* Zeroize sensitive information. -*/ - MD5_memset ((POINTER)x, 0, sizeof (x)); -} - -/* Encodes input (u_int32_t) into output (unsigned char). Assumes len is - a multiple of 4. - */ -static void Encode (output, input, len) -unsigned char *output; -u_int32_t *input; -unsigned int len; -{ - unsigned int i, j; - - for (i = 0, j = 0; j < len; i++, j += 4) { - output[j] = (unsigned char)(input[i] & 0xff); - output[j+1] = (unsigned char)((input[i] >> 8) & 0xff); - output[j+2] = (unsigned char)((input[i] >> 16) & 0xff); - output[j+3] = (unsigned char)((input[i] >> 24) & 0xff); - } -} - -/* Decodes input (unsigned char) into output (u_int32_t). Assumes len is - a multiple of 4. - */ -static void Decode (output, input, len) -u_int32_t *output; -unsigned char *input; -unsigned int len; -{ - unsigned int i, j; - - for (i = 0, j = 0; j < len; i++, j += 4) - output[i] = ((u_int32_t)input[j]) | (((u_int32_t)input[j+1]) << 8) | - (((u_int32_t)input[j+2]) << 16) | (((u_int32_t)input[j+3]) << 24); -} - -/* Note: Replace "for loop" with standard memcpy if possible. - */ - -static void MD5_memcpy (output, input, len) -POINTER output; -POINTER input; -unsigned int len; -{ - unsigned int i; - - for (i = 0; i < len; i++) - output[i] = input[i]; -} - -/* Note: Replace "for loop" with standard memset if possible. - */ -static void MD5_memset (output, value, len) -POINTER output; -int value; -unsigned int len; -{ - unsigned int i; - - for (i = 0; i < len; i++) - ((char *)output)[i] = (char)value; -} diff -Nupr ssmtp-2.64/md5auth/md5.h /tmp/ssmtp/ssmtp-2.61/md5auth/md5.h --- ssmtp-2.64/md5auth/md5.h 2009-11-23 11:45:41.000000000 +0200 +++ /tmp/ssmtp/ssmtp-2.61/md5auth/md5.h 2012-06-30 22:11:27.311575451 +0300 @@ -1,36 +1,130 @@ -/* MD5.H - header file for MD5C.C +/* Declaration of functions and data types used for MD5 sum computing + library functions. + Copyright (C) 1995-1997,1999,2000,2001,2004,2005 + Free Software Foundation, Inc. + This file is part of the GNU C Library. + + This program is free software; you can redistribute it and/or modify it + under the terms of the GNU General Public License as published by the + Free Software Foundation; either version 2, or (at your option) any + later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software Foundation, + Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */ + +#ifndef _MD5_H +#define _MD5_H 1 + +#include <stdio.h> +#include <stdint.h> + +#define MD5_DIGEST_SIZE 16 +#define MD5_BLOCK_SIZE 64 + +#ifndef __GNUC_PREREQ +# if defined __GNUC__ && defined __GNUC_MINOR__ +# define __GNUC_PREREQ(maj, min) \ + ((__GNUC__ << 16) + __GNUC_MINOR__ >= ((maj) << 16) + (min)) +# else +# define __GNUC_PREREQ(maj, min) 0 +# endif +#endif + +#ifndef __THROW +# if defined __cplusplus && __GNUC_PREREQ (2,8) +# define __THROW throw () +# else +# define __THROW +# endif +#endif + +#ifndef __attribute__ +# if ! __GNUC_PREREQ (2,8) || __STRICT_ANSI__ +# define __attribute__(x) +# endif +#endif + +#ifndef _LIBC +# define __md5_buffer md5_buffer +# define __md5_finish_ctx md5_finish_ctx +# define __md5_init_ctx md5_init_ctx +# define __md5_process_block md5_process_block +# define __md5_process_bytes md5_process_bytes +# define __md5_read_ctx md5_read_ctx +# define __md5_stream md5_stream +#endif + +/* Structure to save state of computation between the single steps. */ +struct md5_ctx +{ + uint32_t A; + uint32_t B; + uint32_t C; + uint32_t D; + + uint32_t total[2]; + uint32_t buflen; + uint32_t buffer[32]; +}; + +/* + * The following three functions are build up the low level used in + * the functions `md5_stream' and `md5_buffer'. */ -/* Copyright (C) 1991-2, RSA Data Security, Inc. Created 1991. All -rights reserved. +/* Initialize structure containing state of computation. + (RFC 1321, 3.3: Step 3) */ +extern void __md5_init_ctx (struct md5_ctx *ctx) __THROW; + +/* Starting with the result of former calls of this function (or the + initialization function update the context for the next LEN bytes + starting at BUFFER. + It is necessary that LEN is a multiple of 64!!! */ +extern void __md5_process_block (const void *buffer, size_t len, + struct md5_ctx *ctx) __THROW; + +/* Starting with the result of former calls of this function (or the + initialization function update the context for the next LEN bytes + starting at BUFFER. + It is NOT required that LEN is a multiple of 64. */ +extern void __md5_process_bytes (const void *buffer, size_t len, + struct md5_ctx *ctx) __THROW; + +/* Process the remaining bytes in the buffer and put result from CTX + in first 16 bytes following RESBUF. The result is always in little + endian byte order, so that a byte-wise output yields to the wanted + ASCII representation of the message digest. + + IMPORTANT: On some systems, RESBUF must be aligned to a 32-bit + boundary. */ +extern void *__md5_finish_ctx (struct md5_ctx *ctx, void *resbuf) __THROW; + + +/* Put result from CTX in first 16 bytes following RESBUF. The result is + always in little endian byte order, so that a byte-wise output yields + to the wanted ASCII representation of the message digest. + + IMPORTANT: On some systems, RESBUF must be aligned to a 32-bit + boundary. */ +extern void *__md5_read_ctx (const struct md5_ctx *ctx, void *resbuf) __THROW; + + +/* Compute MD5 message digest for bytes read from STREAM. The + resulting message digest number will be written into the 16 bytes + beginning at RESBLOCK. */ +extern int __md5_stream (FILE *stream, void *resblock) __THROW; + +/* Compute MD5 message digest for LEN bytes beginning at BUFFER. The + result is always in little endian byte order, so that a byte-wise + output yields to the wanted ASCII representation of the message + digest. */ +extern void *__md5_buffer (const char *buffer, size_t len, + void *resblock) __THROW; -License to copy and use this software is granted provided that it -is identified as the "RSA Data Security, Inc. MD5 Message-Digest -Algorithm" in all material mentioning or referencing this software -or this function. - -License is also granted to make and use derivative works provided -that such works are identified as "derived from the RSA Data -Security, Inc. MD5 Message-Digest Algorithm" in all material -mentioning or referencing the derived work. - -RSA Data Security, Inc. makes no representations concerning either -the merchantability of this software or the suitability of this -software for any particular purpose. It is provided "as is" -without express or implied warranty of any kind. - -These notices must be retained in any copies of any part of this -documentation and/or software. - */ - -/* MD5 context. */ -typedef struct { - u_int32_t state[4]; /* state (ABCD) */ - u_int32_t count[2]; /* number of bits, modulo 2^64 (lsb first) */ - unsigned char buffer[64]; /* input buffer */ -} MD5_CTX; - -void MD5Init PROTO_LIST ((MD5_CTX *)); -void MD5Update PROTO_LIST - ((MD5_CTX *, unsigned char *, unsigned int)); -void MD5Final PROTO_LIST ((unsigned char [16], MD5_CTX *)); +#endif /* md5.h */ diff -Nupr ssmtp-2.64/md5auth/memxor.c /tmp/ssmtp/ssmtp-2.61/md5auth/memxor.c --- ssmtp-2.64/md5auth/memxor.c 1970-01-01 02:00:00.000000000 +0200 +++ /tmp/ssmtp/ssmtp-2.61/md5auth/memxor.c 2012-06-30 22:11:27.312583468 +0300 @@ -0,0 +1,37 @@ +/* memxor.c -- perform binary exclusive OR operation of two memory blocks. + Copyright (C) 2005 Free Software Foundation, Inc. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software Foundation, + Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */ + +/* Written by Simon Josefsson. The interface was inspired by memxor + in Niels Möller's Nettle. */ + +#ifdef HAVE_CONFIG_H +# include <config.h> +#endif + +#include "memxor.h" + +void * +memxor (void *restrict dest, const void *restrict src, size_t n) +{ + char const *s = src; + char *d = dest; + + for (; n > 0; n--) + *d++ ^= *s++; + + return dest; +} diff -Nupr ssmtp-2.64/md5auth/memxor.h /tmp/ssmtp/ssmtp-2.61/md5auth/memxor.h --- ssmtp-2.64/md5auth/memxor.h 1970-01-01 02:00:00.000000000 +0200 +++ /tmp/ssmtp/ssmtp-2.61/md5auth/memxor.h 2012-06-30 22:11:27.312583468 +0300 @@ -0,0 +1,31 @@ +/* memxor.h -- perform binary exclusive OR operation on memory blocks. + Copyright (C) 2005 Free Software Foundation, Inc. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software Foundation, + Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */ + +/* Written by Simon Josefsson. The interface was inspired by memxor + in Niels Möller's Nettle. */ + +#ifndef MEMXOR_H +# define MEMXOR_H + +#include <stddef.h> + +/* Compute binary exclusive OR of memory areas DEST and SRC, putting + the result in DEST, of length N bytes. Returns a pointer to + DEST. */ +void *memxor (void *restrict dest, const void *restrict src, size_t n); + +#endif /* MEMXOR_H */ diff -Nupr ssmtp-2.64/md5auth/README /tmp/ssmtp/ssmtp-2.61/md5auth/README --- ssmtp-2.64/md5auth/README 2002-09-27 15:47:45.000000000 +0300 +++ /tmp/ssmtp/ssmtp-2.61/md5auth/README 1970-01-01 02:00:00.000000000 +0200 @@ -1,3 +0,0 @@ -The copyright on this software appears not to be free enough to distribut -within Debian. I have left it here as a aid for users to compile support into -their own binary but give other support to this code. --- ssmtp-2.64/ssmtp.c.orig 2012-07-01 01:56:24.705022293 +0300 +++ ssmtp-2.64/ssmtp.c 2012-07-01 01:57:32.833580856 +0300 @@ -33,7 +33,9 @@ #include <openssl/err.h> #endif #ifdef MD5AUTH -#include "md5auth/hmac_md5.h" +#include "md5auth/hmac.h" +#define MD5_BLOCK_LEN 64 +#define MD5_DIGEST_LEN 16 #endif #include "ssmtp.h" #include <fcntl.h> @@ -663,7 +665,7 @@ int crammd5(char *challengeb64, char *us return 0; from64tobits(challenge, challengeb64); - hmac_md5(challenge, strlen(challenge), secret, strlen(secret), digest); + hmac_md5(secret, strlen(secret), challenge, strlen(challenge), digest); for (i = 0; i < MD5_DIGEST_LEN; i++) { digascii[2 * i] = hextab[digest[i] >> 4]; --- ssmtp-2.64/configure.orig 2008-03-06 22:53:03.000000000 +0200 +++ ssmtp-2.64/configure 2012-07-01 02:17:56.653570869 +0300 @@ -1,37 +1,325 @@ #! /bin/sh - # Guess values for system-dependent variables and create Makefiles. -# Generated automatically using autoconf version 2.13 -# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. +# Generated by GNU Autoconf 2.59. # +# Copyright (C) 2003 Free Software Foundation, Inc. # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. +## --------------------- ## +## M4sh Initialization. ## +## --------------------- ## + +# Be Bourne compatible +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' +elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then + set -o posix +fi +DUALCASE=1; export DUALCASE # for MKS sh + +# Support unset when possible. +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + as_unset=unset +else + as_unset=false +fi + + +# Work around bugs in pre-3.0 UWIN ksh. +$as_unset ENV MAIL MAILPATH +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +for as_var in \ + LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ + LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ + LC_TELEPHONE LC_TIME +do + if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then + eval $as_var=C; export $as_var + else + $as_unset $as_var + fi +done + +# Required to use basename. +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + + +# Name of the executable. +as_me=`$as_basename "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)$' \| \ + . : '\(.\)' 2>/dev/null || +echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } + /^X\/\(\/\/\)$/{ s//\1/; q; } + /^X\/\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + + +# PATH needs CR, and LINENO needs CR and PATH. +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh +fi + + + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" || { + # Find who we are. Look in the path if we contain no path at all + # relative or not. + case $0 in + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done + + ;; + esac + # We did not find ourselves, most probably we were run as `sh COMMAND' + # in which case we are not to be found in the path. + if test "x$as_myself" = x; then + as_myself=$0 + fi + if test ! -f "$as_myself"; then + { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2 + { (exit 1); exit 1; }; } + fi + case $CONFIG_SHELL in + '') + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for as_base in sh bash ksh sh5; do + case $as_dir in + /*) + if ("$as_dir/$as_base" -c ' + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then + $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } + $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } + CONFIG_SHELL=$as_dir/$as_base + export CONFIG_SHELL + exec "$CONFIG_SHELL" "$0" ${1+"$@"} + fi;; + esac + done +done +;; + esac + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a + # line-number line before each line; the second 'sed' does the real + # work. The second script uses 'N' to pair each line-number line + # with the numbered line, and appends trailing '-' during + # substitution so that $LINENO is not a special case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the + # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) + sed '=' <$as_myself | + sed ' + N + s,$,-, + : loop + s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, + t loop + s,-$,, + s,^['$as_cr_digits']*\n,, + ' >$as_me.lineno && + chmod +x $as_me.lineno || + { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensible to this). + . ./$as_me.lineno + # Exit status is that of the last command. + exit +} + + +case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in + *c*,-n*) ECHO_N= ECHO_C=' +' ECHO_T=' ' ;; + *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; + *) ECHO_N= ECHO_C='\c' ECHO_T= ;; +esac + +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +rm -f conf$$ conf$$.exe conf$$.file +echo >conf$$.file +if ln -s conf$$.file conf$$ 2>/dev/null; then + # We could just check for DJGPP; but this test a) works b) is more generic + # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). + if test -f conf$$.exe; then + # Don't use ln at all; we don't have any links + as_ln_s='cp -p' + else + as_ln_s='ln -s' + fi +elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln +else + as_ln_s='cp -p' +fi +rm -f conf$$ conf$$.exe conf$$.file + +if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +as_executable_p="test -f" + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +# IFS +# We need space, tab and new line, in precisely that order. +as_nl=' +' +IFS=" $as_nl" + +# CDPATH. +$as_unset CDPATH + + +# Name of the host. +# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, +# so uname gets run too. +ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` + +exec 6>&1 -# Defaults: -ac_help= +# +# Initializations. +# ac_default_prefix=/usr/local -# Any additions from configure.in: -ac_help="$ac_help - --enable-logfile additional logging over and above syslog" -ac_help="$ac_help - --disable-rewrite-domain - support for rewriting the sending domain" -ac_help="$ac_help - --enable-ssl support for secure connection to mail server" -ac_help="$ac_help - --enable-inet6 support for IPv6 transport" -ac_help="$ac_help - --enable-md5auth support for MD5 authentication" +ac_config_libobj_dir=. +cross_compiling=no +subdirs= +MFLAGS= +MAKEFLAGS= +SHELL=${CONFIG_SHELL-/bin/sh} + +# Maximum number of lines to put in a shell here document. +# This variable seems obsolete. It should probably be removed, and +# only ac_max_sed_lines should be used. +: ${ac_max_here_lines=38} + +# Identity of this package. +PACKAGE_NAME= +PACKAGE_TARNAME= +PACKAGE_VERSION= +PACKAGE_STRING= +PACKAGE_BUGREPORT= + +ac_unique_file="ssmtp.c" +# Factoring default headers for most tests. +ac_includes_default="\ +#include <stdio.h> +#if HAVE_SYS_TYPES_H +# include <sys/types.h> +#endif +#if HAVE_SYS_STAT_H +# include <sys/stat.h> +#endif +#if STDC_HEADERS +# include <stdlib.h> +# include <stddef.h> +#else +# if HAVE_STDLIB_H +# include <stdlib.h> +# endif +#endif +#if HAVE_STRING_H +# if !STDC_HEADERS && HAVE_MEMORY_H +# include <memory.h> +# endif +# include <string.h> +#endif +#if HAVE_STRINGS_H +# include <strings.h> +#endif +#if HAVE_INTTYPES_H +# include <inttypes.h> +#else +# if HAVE_STDINT_H +# include <stdint.h> +# endif +#endif +#if HAVE_UNISTD_H +# include <unistd.h> +#endif" + +ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA LN_S CPP EGREP SRCS LIBOBJS LTLIBOBJS' +ac_subst_files='' # Initialize some variables set by options. +ac_init_help= +ac_init_version=false # The variables have the same names as the options, with # dashes changed to underlines. -build=NONE -cache_file=./config.cache +cache_file=/dev/null exec_prefix=NONE -host=NONE no_create= -nonopt=NONE no_recursion= prefix=NONE program_prefix=NONE @@ -40,10 +328,15 @@ program_transform_name=s,x,x, silent= site= srcdir= -target=NONE verbose= x_includes=NONE x_libraries=NONE + +# Installation directory options. +# These are left unexpanded so users can "make install exec_prefix=/foo" +# and all the variables that are supposed to be based on exec_prefix +# by default will actually change. +# Use braces instead of parens because sh, perl, etc. also accept them. bindir='${exec_prefix}/bin' sbindir='${exec_prefix}/sbin' libexecdir='${exec_prefix}/libexec' @@ -57,17 +350,9 @@ oldincludedir='/usr/include' infodir='${prefix}/info' mandir='${prefix}/man' -# Initialize some other variables. -subdirs= -MFLAGS= MAKEFLAGS= -SHELL=${CONFIG_SHELL-/bin/sh} -# Maximum number of lines to put in a shell here document. -ac_max_here_lines=12 - ac_prev= for ac_option do - # If the previous option needs an argument, assign it. if test -n "$ac_prev"; then eval "$ac_prev=\$ac_option" @@ -75,59 +360,59 @@ do continue fi - case "$ac_option" in - -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;; - *) ac_optarg= ;; - esac + ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'` # Accept the important Cygnus configure options, so we can diagnose typos. - case "$ac_option" in + case $ac_option in -bindir | --bindir | --bindi | --bind | --bin | --bi) ac_prev=bindir ;; -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) - bindir="$ac_optarg" ;; + bindir=$ac_optarg ;; -build | --build | --buil | --bui | --bu) - ac_prev=build ;; + ac_prev=build_alias ;; -build=* | --build=* | --buil=* | --bui=* | --bu=*) - build="$ac_optarg" ;; + build_alias=$ac_optarg ;; -cache-file | --cache-file | --cache-fil | --cache-fi \ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) ac_prev=cache_file ;; -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) - cache_file="$ac_optarg" ;; + cache_file=$ac_optarg ;; + + --config-cache | -C) + cache_file=config.cache ;; -datadir | --datadir | --datadi | --datad | --data | --dat | --da) ac_prev=datadir ;; -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ | --da=*) - datadir="$ac_optarg" ;; + datadir=$ac_optarg ;; -disable-* | --disable-*) - ac_feature=`echo $ac_option|sed -e 's/-*disable-//'` + ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` # Reject names that are not valid shell variable names. - if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then - { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } - fi - ac_feature=`echo $ac_feature| sed 's/-/_/g'` - eval "enable_${ac_feature}=no" ;; + expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid feature name: $ac_feature" >&2 + { (exit 1); exit 1; }; } + ac_feature=`echo $ac_feature | sed 's/-/_/g'` + eval "enable_$ac_feature=no" ;; -enable-* | --enable-*) - ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'` + ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` # Reject names that are not valid shell variable names. - if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then - { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } - fi - ac_feature=`echo $ac_feature| sed 's/-/_/g'` - case "$ac_option" in - *=*) ;; + expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid feature name: $ac_feature" >&2 + { (exit 1); exit 1; }; } + ac_feature=`echo $ac_feature | sed 's/-/_/g'` + case $ac_option in + *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; *) ac_optarg=yes ;; esac - eval "enable_${ac_feature}='$ac_optarg'" ;; + eval "enable_$ac_feature='$ac_optarg'" ;; -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ @@ -136,95 +421,47 @@ do -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ | --exec=* | --exe=* | --ex=*) - exec_prefix="$ac_optarg" ;; + exec_prefix=$ac_optarg ;; -gas | --gas | --ga | --g) # Obsolete; use --with-gas. with_gas=yes ;; - -help | --help | --hel | --he) - # Omit some internal or obsolete options to make the list less imposing. - # This message is too long to be a string in the A/UX 3.1 sh. - cat << EOF -Usage: configure [options] [host] -Options: [defaults in brackets after descriptions] -Configuration: - --cache-file=FILE cache test results in FILE - --help print this message - --no-create do not create output files - --quiet, --silent do not print \`checking...' messages - --version print the version of autoconf that created configure -Directory and file names: - --prefix=PREFIX install architecture-independent files in PREFIX - [$ac_default_prefix] - --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX - [same as prefix] - --bindir=DIR user executables in DIR [EPREFIX/bin] - --sbindir=DIR system admin executables in DIR [EPREFIX/sbin] - --libexecdir=DIR program executables in DIR [EPREFIX/libexec] - --datadir=DIR read-only architecture-independent data in DIR - [PREFIX/share] - --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc] - --sharedstatedir=DIR modifiable architecture-independent data in DIR - [PREFIX/com] - --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var] - --libdir=DIR object code libraries in DIR [EPREFIX/lib] - --includedir=DIR C header files in DIR [PREFIX/include] - --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include] - --infodir=DIR info documentation in DIR [PREFIX/info] - --mandir=DIR man documentation in DIR [PREFIX/man] - --srcdir=DIR find the sources in DIR [configure dir or ..] - --program-prefix=PREFIX prepend PREFIX to installed program names - --program-suffix=SUFFIX append SUFFIX to installed program names - --program-transform-name=PROGRAM - run sed PROGRAM on installed program names -EOF - cat << EOF -Host type: - --build=BUILD configure for building on BUILD [BUILD=HOST] - --host=HOST configure for HOST [guessed] - --target=TARGET configure for TARGET [TARGET=HOST] -Features and packages: - --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) - --enable-FEATURE[=ARG] include FEATURE [ARG=yes] - --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] - --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) - --x-includes=DIR X include files are in DIR - --x-libraries=DIR X library files are in DIR -EOF - if test -n "$ac_help"; then - echo "--enable and --with options recognized:$ac_help" - fi - exit 0 ;; + -help | --help | --hel | --he | -h) + ac_init_help=long ;; + -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) + ac_init_help=recursive ;; + -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) + ac_init_help=short ;; -host | --host | --hos | --ho) - ac_prev=host ;; + ac_prev=host_alias ;; -host=* | --host=* | --hos=* | --ho=*) - host="$ac_optarg" ;; + host_alias=$ac_optarg ;; -includedir | --includedir | --includedi | --included | --include \ | --includ | --inclu | --incl | --inc) ac_prev=includedir ;; -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ | --includ=* | --inclu=* | --incl=* | --inc=*) - includedir="$ac_optarg" ;; + includedir=$ac_optarg ;; -infodir | --infodir | --infodi | --infod | --info | --inf) ac_prev=infodir ;; -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) - infodir="$ac_optarg" ;; + infodir=$ac_optarg ;; -libdir | --libdir | --libdi | --libd) ac_prev=libdir ;; -libdir=* | --libdir=* | --libdi=* | --libd=*) - libdir="$ac_optarg" ;; + libdir=$ac_optarg ;; -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ | --libexe | --libex | --libe) ac_prev=libexecdir ;; -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ | --libexe=* | --libex=* | --libe=*) - libexecdir="$ac_optarg" ;; + libexecdir=$ac_optarg ;; -localstatedir | --localstatedir | --localstatedi | --localstated \ | --localstate | --localstat | --localsta | --localst \ @@ -233,19 +470,19 @@ EOF -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ | --localstate=* | --localstat=* | --localsta=* | --localst=* \ | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) - localstatedir="$ac_optarg" ;; + localstatedir=$ac_optarg ;; -mandir | --mandir | --mandi | --mand | --man | --ma | --m) ac_prev=mandir ;; -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) - mandir="$ac_optarg" ;; + mandir=$ac_optarg ;; -nfp | --nfp | --nf) # Obsolete; use --without-fp. with_fp=no ;; -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c) + | --no-cr | --no-c | -n) no_create=yes ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ @@ -259,26 +496,26 @@ EOF -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) - oldincludedir="$ac_optarg" ;; + oldincludedir=$ac_optarg ;; -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) ac_prev=prefix ;; -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) - prefix="$ac_optarg" ;; + prefix=$ac_optarg ;; -program-prefix | --program-prefix | --program-prefi | --program-pref \ | --program-pre | --program-pr | --program-p) ac_prev=program_prefix ;; -program-prefix=* | --program-prefix=* | --program-prefi=* \ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) - program_prefix="$ac_optarg" ;; + program_prefix=$ac_optarg ;; -program-suffix | --program-suffix | --program-suffi | --program-suff \ | --program-suf | --program-su | --program-s) ac_prev=program_suffix ;; -program-suffix=* | --program-suffix=* | --program-suffi=* \ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) - program_suffix="$ac_optarg" ;; + program_suffix=$ac_optarg ;; -program-transform-name | --program-transform-name \ | --program-transform-nam | --program-transform-na \ @@ -295,7 +532,7 @@ EOF | --program-transfo=* | --program-transf=* \ | --program-trans=* | --program-tran=* \ | --progr-tra=* | --program-tr=* | --program-t=*) - program_transform_name="$ac_optarg" ;; + program_transform_name=$ac_optarg ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) @@ -305,7 +542,7 @@ EOF ac_prev=sbindir ;; -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ | --sbi=* | --sb=*) - sbindir="$ac_optarg" ;; + sbindir=$ac_optarg ;; -sharedstatedir | --sharedstatedir | --sharedstatedi \ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ @@ -316,58 +553,57 @@ EOF | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ | --sha=* | --sh=*) - sharedstatedir="$ac_optarg" ;; + sharedstatedir=$ac_optarg ;; -site | --site | --sit) ac_prev=site ;; -site=* | --site=* | --sit=*) - site="$ac_optarg" ;; + site=$ac_optarg ;; -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) - srcdir="$ac_optarg" ;; + srcdir=$ac_optarg ;; -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ | --syscon | --sysco | --sysc | --sys | --sy) ac_prev=sysconfdir ;; -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) - sysconfdir="$ac_optarg" ;; + sysconfdir=$ac_optarg ;; -target | --target | --targe | --targ | --tar | --ta | --t) - ac_prev=target ;; + ac_prev=target_alias ;; -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) - target="$ac_optarg" ;; + target_alias=$ac_optarg ;; -v | -verbose | --verbose | --verbos | --verbo | --verb) verbose=yes ;; - -version | --version | --versio | --versi | --vers) - echo "configure generated by autoconf version 2.13" - exit 0 ;; + -version | --version | --versio | --versi | --vers | -V) + ac_init_version=: ;; -with-* | --with-*) - ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'` + ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` # Reject names that are not valid shell variable names. - if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then - { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } - fi + expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid package name: $ac_package" >&2 + { (exit 1); exit 1; }; } ac_package=`echo $ac_package| sed 's/-/_/g'` - case "$ac_option" in - *=*) ;; + case $ac_option in + *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; *) ac_optarg=yes ;; esac - eval "with_${ac_package}='$ac_optarg'" ;; + eval "with_$ac_package='$ac_optarg'" ;; -without-* | --without-*) - ac_package=`echo $ac_option|sed -e 's/-*without-//'` + ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` # Reject names that are not valid shell variable names. - if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then - { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } - fi - ac_package=`echo $ac_package| sed 's/-/_/g'` - eval "with_${ac_package}=no" ;; + expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid package name: $ac_package" >&2 + { (exit 1); exit 1; }; } + ac_package=`echo $ac_package | sed 's/-/_/g'` + eval "with_$ac_package=no" ;; --x) # Obsolete; use --with-x. @@ -378,99 +614,110 @@ EOF ac_prev=x_includes ;; -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) - x_includes="$ac_optarg" ;; + x_includes=$ac_optarg ;; -x-libraries | --x-libraries | --x-librarie | --x-librari \ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) ac_prev=x_libraries ;; -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) - x_libraries="$ac_optarg" ;; + x_libraries=$ac_optarg ;; - -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; } + -*) { echo "$as_me: error: unrecognized option: $ac_option +Try \`$0 --help' for more information." >&2 + { (exit 1); exit 1; }; } ;; + *=*) + ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` + # Reject names that are not valid shell variable names. + expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 + { (exit 1); exit 1; }; } + ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` + eval "$ac_envvar='$ac_optarg'" + export $ac_envvar ;; + *) - if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then - echo "configure: warning: $ac_option: invalid host type" 1>&2 - fi - if test "x$nonopt" != xNONE; then - { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } - fi - nonopt="$ac_option" + # FIXME: should be removed in autoconf 3.0. + echo "$as_me: WARNING: you should use --build, --host, --target" >&2 + expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && + echo "$as_me: WARNING: invalid host type: $ac_option" >&2 + : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} ;; esac done if test -n "$ac_prev"; then - { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; } -fi - -trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 - -# File descriptor usage: -# 0 standard input -# 1 file creation -# 2 errors and warnings -# 3 some systems may open it to /dev/tty -# 4 used on the Kubota Titan -# 6 checking for... messages and results -# 5 compiler messages saved in config.log -if test "$silent" = yes; then - exec 6>/dev/null -else - exec 6>&1 + ac_option=--`echo $ac_prev | sed 's/_/-/g'` + { echo "$as_me: error: missing argument to $ac_option" >&2 + { (exit 1); exit 1; }; } fi -exec 5>./config.log -echo "\ -This file contains any messages produced by compilers while -running configure, to aid debugging if configure makes a mistake. -" 1>&5 +# Be sure to have absolute paths. +for ac_var in exec_prefix prefix +do + eval ac_val=$`echo $ac_var` + case $ac_val in + [\\/$]* | ?:[\\/]* | NONE | '' ) ;; + *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 + { (exit 1); exit 1; }; };; + esac +done -# Strip out --no-create and --no-recursion so they do not pile up. -# Also quote any args containing shell metacharacters. -ac_configure_args= -for ac_arg +# Be sure to have absolute paths. +for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \ + localstatedir libdir includedir oldincludedir infodir mandir do - case "$ac_arg" in - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c) ;; - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;; - *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*) - ac_configure_args="$ac_configure_args '$ac_arg'" ;; - *) ac_configure_args="$ac_configure_args $ac_arg" ;; + eval ac_val=$`echo $ac_var` + case $ac_val in + [\\/$]* | ?:[\\/]* ) ;; + *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 + { (exit 1); exit 1; }; };; esac done -# NLS nuisances. -# Only set these to C if already set. These must not be set unconditionally -# because not all systems understand e.g. LANG=C (notably SCO). -# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'! -# Non-C LC_CTYPE values break the ctype check. -if test "${LANG+set}" = set; then LANG=C; export LANG; fi -if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi -if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi -if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi +# There might be people who depend on the old broken behavior: `$host' +# used to hold the argument of --host etc. +# FIXME: To remove some day. +build=$build_alias +host=$host_alias +target=$target_alias + +# FIXME: To remove some day. +if test "x$host_alias" != x; then + if test "x$build_alias" = x; then + cross_compiling=maybe + echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. + If a cross compiler is detected then cross compile mode will be used." >&2 + elif test "x$build_alias" != "x$host_alias"; then + cross_compiling=yes + fi +fi -# confdefs.h avoids OS command line length limits that DEFS can exceed. -rm -rf conftest* confdefs.h -# AIX cpp loses on an empty file, so make sure it contains at least a newline. -echo > confdefs.h +ac_tool_prefix= +test -n "$host_alias" && ac_tool_prefix=$host_alias- + +test "$silent" = yes && exec 6>/dev/null -# A filename unique to this package, relative to the directory that -# configure is in, which we can look for to find out if srcdir is correct. -ac_unique_file=ssmtp.c # Find the source files, if location was not specified. if test -z "$srcdir"; then ac_srcdir_defaulted=yes # Try the directory containing this script, then its parent. - ac_prog=$0 - ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'` - test "x$ac_confdir" = "x$ac_prog" && ac_confdir=. + ac_confdir=`(dirname "$0") 2>/dev/null || +$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$0" : 'X\(//\)[^/]' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$0" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` srcdir=$ac_confdir if test ! -r $srcdir/$ac_unique_file; then srcdir=.. @@ -480,13 +727,464 @@ else fi if test ! -r $srcdir/$ac_unique_file; then if test "$ac_srcdir_defaulted" = yes; then - { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; } + { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2 + { (exit 1); exit 1; }; } else - { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; } + { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 + { (exit 1); exit 1; }; } fi fi -srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` +(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null || + { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2 + { (exit 1); exit 1; }; } +srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'` +ac_env_build_alias_set=${build_alias+set} +ac_env_build_alias_value=$build_alias +ac_cv_env_build_alias_set=${build_alias+set} +ac_cv_env_build_alias_value=$build_alias +ac_env_host_alias_set=${host_alias+set} +ac_env_host_alias_value=$host_alias +ac_cv_env_host_alias_set=${host_alias+set} +ac_cv_env_host_alias_value=$host_alias +ac_env_target_alias_set=${target_alias+set} +ac_env_target_alias_value=$target_alias +ac_cv_env_target_alias_set=${target_alias+set} +ac_cv_env_target_alias_value=$target_alias +ac_env_CC_set=${CC+set} +ac_env_CC_value=$CC +ac_cv_env_CC_set=${CC+set} +ac_cv_env_CC_value=$CC +ac_env_CFLAGS_set=${CFLAGS+set} +ac_env_CFLAGS_value=$CFLAGS +ac_cv_env_CFLAGS_set=${CFLAGS+set} +ac_cv_env_CFLAGS_value=$CFLAGS +ac_env_LDFLAGS_set=${LDFLAGS+set} +ac_env_LDFLAGS_value=$LDFLAGS +ac_cv_env_LDFLAGS_set=${LDFLAGS+set} +ac_cv_env_LDFLAGS_value=$LDFLAGS +ac_env_CPPFLAGS_set=${CPPFLAGS+set} +ac_env_CPPFLAGS_value=$CPPFLAGS +ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set} +ac_cv_env_CPPFLAGS_value=$CPPFLAGS +ac_env_CPP_set=${CPP+set} +ac_env_CPP_value=$CPP +ac_cv_env_CPP_set=${CPP+set} +ac_cv_env_CPP_value=$CPP + +# +# Report the --help message. +# +if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF +\`configure' configures this package to adapt to many kinds of systems. + +Usage: $0 [OPTION]... [VAR=VALUE]... + +To assign environment variables (e.g., CC, CFLAGS...), specify them as +VAR=VALUE. See below for descriptions of some of the useful variables. + +Defaults for the options are specified in brackets. + +Configuration: + -h, --help display this help and exit + --help=short display options specific to this package + --help=recursive display the short help of all the included packages + -V, --version display version information and exit + -q, --quiet, --silent do not print \`checking...' messages + --cache-file=FILE cache test results in FILE [disabled] + -C, --config-cache alias for \`--cache-file=config.cache' + -n, --no-create do not create output files + --srcdir=DIR find the sources in DIR [configure dir or \`..'] + +_ACEOF + + cat <<_ACEOF +Installation directories: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + [PREFIX] + +By default, \`make install' will install all the files in +\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify +an installation prefix other than \`$ac_default_prefix' using \`--prefix', +for instance \`--prefix=\$HOME'. + +For better control, use the options below. + +Fine tuning of the installation directories: + --bindir=DIR user executables [EPREFIX/bin] + --sbindir=DIR system admin executables [EPREFIX/sbin] + --libexecdir=DIR program executables [EPREFIX/libexec] + --datadir=DIR read-only architecture-independent data [PREFIX/share] + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] + --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --libdir=DIR object code libraries [EPREFIX/lib] + --includedir=DIR C header files [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc [/usr/include] + --infodir=DIR info documentation [PREFIX/info] + --mandir=DIR man documentation [PREFIX/man] +_ACEOF + + cat <<\_ACEOF +_ACEOF +fi + +if test -n "$ac_init_help"; then + + cat <<\_ACEOF + +Optional Features: + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --enable-logfile additional logging over and above syslog + --disable-rewrite-domain + support for rewriting the sending domain + --enable-ssl support for secure connection to mail server + --enable-inet6 support for IPv6 transport + --enable-md5auth support for MD5 authentication + +Some influential environment variables: + CC C compiler command + CFLAGS C compiler flags + LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a + nonstandard directory <lib dir> + CPPFLAGS C/C++ preprocessor flags, e.g. -I<include dir> if you have + headers in a nonstandard directory <include dir> + CPP C preprocessor + +Use these variables to override the choices made by `configure' or to help +it to find libraries and programs with nonstandard names/locations. + +_ACEOF +fi + +if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. + ac_popdir=`pwd` + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue + test -d $ac_dir || continue + ac_builddir=. + +if test "$ac_dir" != .; then + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` + # A "../" for each directory in $ac_dir_suffix. + ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` +else + ac_dir_suffix= ac_top_builddir= +fi + +case $srcdir in + .) # No --srcdir option. We are building in place. + ac_srcdir=. + if test -z "$ac_top_builddir"; then + ac_top_srcdir=. + else + ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` + fi ;; + [\\/]* | ?:[\\/]* ) # Absolute path. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir ;; + *) # Relative path. + ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_builddir$srcdir ;; +esac + +# Do not use `cd foo && pwd` to compute absolute paths, because +# the directories may not exist. +case `pwd` in +.) ac_abs_builddir="$ac_dir";; +*) + case "$ac_dir" in + .) ac_abs_builddir=`pwd`;; + [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; + *) ac_abs_builddir=`pwd`/"$ac_dir";; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_top_builddir=${ac_top_builddir}.;; +*) + case ${ac_top_builddir}. in + .) ac_abs_top_builddir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; + *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_srcdir=$ac_srcdir;; +*) + case $ac_srcdir in + .) ac_abs_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; + *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_top_srcdir=$ac_top_srcdir;; +*) + case $ac_top_srcdir in + .) ac_abs_top_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; + *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; + esac;; +esac + + cd $ac_dir + # Check for guested configure; otherwise get Cygnus style configure. + if test -f $ac_srcdir/configure.gnu; then + echo + $SHELL $ac_srcdir/configure.gnu --help=recursive + elif test -f $ac_srcdir/configure; then + echo + $SHELL $ac_srcdir/configure --help=recursive + elif test -f $ac_srcdir/configure.ac || + test -f $ac_srcdir/configure.in; then + echo + $ac_configure --help + else + echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 + fi + cd "$ac_popdir" + done +fi + +test -n "$ac_init_help" && exit 0 +if $ac_init_version; then + cat <<\_ACEOF + +Copyright (C) 2003 Free Software Foundation, Inc. +This configure script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it. +_ACEOF + exit 0 +fi +exec 5>config.log +cat >&5 <<_ACEOF +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. + +It was created by $as_me, which was +generated by GNU Autoconf 2.59. Invocation command line was + + $ $0 $@ + +_ACEOF +{ +cat <<_ASUNAME +## --------- ## +## Platform. ## +## --------- ## + +hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` + +/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +hostinfo = `(hostinfo) 2>/dev/null || echo unknown` +/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` +/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` + +_ASUNAME + +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + echo "PATH: $as_dir" +done + +} >&5 + +cat >&5 <<_ACEOF + + +## ----------- ## +## Core tests. ## +## ----------- ## + +_ACEOF + + +# Keep a trace of the command line. +# Strip out --no-create and --no-recursion so they do not pile up. +# Strip out --silent because we don't want to record it for future runs. +# Also quote any args containing shell meta-characters. +# Make two passes to allow for proper duplicate-argument suppression. +ac_configure_args= +ac_configure_args0= +ac_configure_args1= +ac_sep= +ac_must_keep_next=false +for ac_pass in 1 2 +do + for ac_arg + do + case $ac_arg in + -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; + *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) + ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in + 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; + 2) + ac_configure_args1="$ac_configure_args1 '$ac_arg'" + if test $ac_must_keep_next = true; then + ac_must_keep_next=false # Got value, back to normal. + else + case $ac_arg in + *=* | --config-cache | -C | -disable-* | --disable-* \ + | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ + | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ + | -with-* | --with-* | -without-* | --without-* | --x) + case "$ac_configure_args0 " in + "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; + esac + ;; + -* ) ac_must_keep_next=true ;; + esac + fi + ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" + # Get rid of the leading space. + ac_sep=" " + ;; + esac + done +done +$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } +$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } + +# When interrupted or exit'd, cleanup temporary files, and complete +# config.log. We remove comments because anyway the quotes in there +# would cause problems or look ugly. +# WARNING: Be sure not to use single quotes in there, as some shells, +# such as our DU 5.0 friend, will then `close' the trap. +trap 'exit_status=$? + # Save into config.log some information that might help in debugging. + { + echo + + cat <<\_ASBOX +## ---------------- ## +## Cache variables. ## +## ---------------- ## +_ASBOX + echo + # The following way of writing the cache mishandles newlines in values, +{ + (set) 2>&1 | + case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in + *ac_space=\ *) + sed -n \ + "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p" + ;; + *) + sed -n \ + "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" + ;; + esac; +} + echo + + cat <<\_ASBOX +## ----------------- ## +## Output variables. ## +## ----------------- ## +_ASBOX + echo + for ac_var in $ac_subst_vars + do + eval ac_val=$`echo $ac_var` + echo "$ac_var='"'"'$ac_val'"'"'" + done | sort + echo + + if test -n "$ac_subst_files"; then + cat <<\_ASBOX +## ------------- ## +## Output files. ## +## ------------- ## +_ASBOX + echo + for ac_var in $ac_subst_files + do + eval ac_val=$`echo $ac_var` + echo "$ac_var='"'"'$ac_val'"'"'" + done | sort + echo + fi + + if test -s confdefs.h; then + cat <<\_ASBOX +## ----------- ## +## confdefs.h. ## +## ----------- ## +_ASBOX + echo + sed "/^$/d" confdefs.h | sort + echo + fi + test "$ac_signal" != 0 && + echo "$as_me: caught signal $ac_signal" + echo "$as_me: exit $exit_status" + } >&5 + rm -f core *.core && + rm -rf conftest* confdefs* conf$$* $ac_clean_files && + exit $exit_status + ' 0 +for ac_signal in 1 2 13 15; do + trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal +done +ac_signal=0 + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -rf conftest* confdefs.h +# AIX cpp loses on an empty file, so make sure it contains at least a newline. +echo >confdefs.h + +# Predefined preprocessor variables. +cat >>confdefs.h <<_ACEOF +#define PACKAGE_NAME "$PACKAGE_NAME" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_TARNAME "$PACKAGE_TARNAME" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_VERSION "$PACKAGE_VERSION" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_STRING "$PACKAGE_STRING" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" +_ACEOF + + +# Let the site file select an alternate cache file if it wants to. # Prefer explicitly selected file to automatically selected ones. if test -z "$CONFIG_SITE"; then if test "x$prefix" != xNONE; then @@ -497,253 +1195,760 @@ if test -z "$CONFIG_SITE"; then fi for ac_site_file in $CONFIG_SITE; do if test -r "$ac_site_file"; then - echo "loading site script $ac_site_file" + { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 +echo "$as_me: loading site script $ac_site_file" >&6;} + sed 's/^/| /' "$ac_site_file" >&5 . "$ac_site_file" fi done if test -r "$cache_file"; then - echo "loading cache $cache_file" - . $cache_file + # Some versions of bash will fail to source /dev/null (special + # files actually), so we avoid doing that. + if test -f "$cache_file"; then + { echo "$as_me:$LINENO: loading cache $cache_file" >&5 +echo "$as_me: loading cache $cache_file" >&6;} + case $cache_file in + [\\/]* | ?:[\\/]* ) . $cache_file;; + *) . ./$cache_file;; + esac + fi else - echo "creating cache $cache_file" - > $cache_file + { echo "$as_me:$LINENO: creating cache $cache_file" >&5 +echo "$as_me: creating cache $cache_file" >&6;} + >$cache_file +fi + +# Check that the precious variables saved in the cache have kept the same +# value. +ac_cache_corrupted=false +for ac_var in `(set) 2>&1 | + sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do + eval ac_old_set=\$ac_cv_env_${ac_var}_set + eval ac_new_set=\$ac_env_${ac_var}_set + eval ac_old_val="\$ac_cv_env_${ac_var}_value" + eval ac_new_val="\$ac_env_${ac_var}_value" + case $ac_old_set,$ac_new_set in + set,) + { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,set) + { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 +echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,);; + *) + if test "x$ac_old_val" != "x$ac_new_val"; then + { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 +echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} + { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 +echo "$as_me: former value: $ac_old_val" >&2;} + { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 +echo "$as_me: current value: $ac_new_val" >&2;} + ac_cache_corrupted=: + fi;; + esac + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in + *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) + ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in + *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. + *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; + esac + fi +done +if $ac_cache_corrupted; then + { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 +echo "$as_me: error: changes in the environment can compromise the build" >&2;} + { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 +echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} + { (exit 1); exit 1; }; } fi ac_ext=c -# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' -ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cc_cross +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu -ac_exeext= -ac_objext=o -if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then - # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. - if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then - ac_n= ac_c=' -' ac_t=' ' - else - ac_n=-n ac_c= ac_t= - fi -else - ac_n= ac_c='\c' ac_t= -fi -# Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:540: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 + + + + + + + + + + + + + + + + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. +set dummy ${ac_tool_prefix}gcc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_CC="gcc" - break - fi - done - IFS="$ac_save_ifs" +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + fi fi -CC="$ac_cv_prog_CC" +CC=$ac_cv_prog_CC if test -n "$CC"; then - echo "$ac_t""$CC" 1>&6 + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 else - echo "$ac_t""no" 1>&6 + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 fi -if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:570: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_prog_rejected=no - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" - break - fi - done - IFS="$ac_save_ifs" -if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_CC - shift - if test $# -gt 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set CC to just the basename; use the full file name. - shift - set dummy "$ac_dir/$ac_word" "$@" - shift - ac_cv_prog_CC="$@" +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="gcc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 fi +done +done + fi fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +echo "${ECHO_T}$ac_ct_CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 fi -CC="$ac_cv_prog_CC" -if test -n "$CC"; then - echo "$ac_t""$CC" 1>&6 + + CC=$ac_ct_CC else - echo "$ac_t""no" 1>&6 + CC="$ac_cv_prog_CC" fi - if test -z "$CC"; then - case "`uname -s`" in - *win32* | *WIN32*) - # Extract the first word of "cl", so it can be a program name with args. -set dummy cl; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:621: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. +set dummy ${ac_tool_prefix}cc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_CC="cl" - break - fi - done - IFS="$ac_save_ifs" -fi -fi -CC="$ac_cv_prog_CC" +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +CC=$ac_cv_prog_CC if test -n "$CC"; then - echo "$ac_t""$CC" 1>&6 + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 else - echo "$ac_t""no" 1>&6 -fi - ;; - esac - fi - test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 fi -echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:653: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done -ac_ext=c -# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. -ac_cpp='$CPP $CPPFLAGS' -ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cc_cross +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +echo "${ECHO_T}$ac_ct_CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi -cat > conftest.$ac_ext << EOF + CC=$ac_ct_CC +else + CC="$ac_cv_prog_CC" +fi -#line 664 "configure" -#include "confdefs.h" +fi +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + ac_prog_rejected=no +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done -main(){return(0);} -EOF -if { (eval echo configure:669: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - ac_cv_prog_cc_works=yes - # If we can't run a trivial program, we are probably using a cross compiler. - if (./conftest; exit) 2>/dev/null; then - ac_cv_prog_cc_cross=no - else - ac_cv_prog_cc_cross=yes +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# != 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" fi +fi +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - ac_cv_prog_cc_works=no + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 fi -rm -fr conftest* -ac_ext=c -# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. -ac_cpp='$CPP $CPPFLAGS' -ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cc_cross -echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 -if test $ac_cv_prog_cc_works = no; then - { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi -echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:695: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 -echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 -cross_compiling=$ac_cv_prog_cc_cross +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + for ac_prog in cl + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done -echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:700: checking whether we are using GNU C" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 else - cat > conftest.c <<EOF -#ifdef __GNUC__ - yes; -#endif -EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:709: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then - ac_cv_prog_gcc=yes + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + test -n "$CC" && break + done +fi +if test -z "$CC"; then + ac_ct_CC=$CC + for ac_prog in cl +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else - ac_cv_prog_gcc=no +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + fi fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +echo "${ECHO_T}$ac_ct_CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi -echo "$ac_t""$ac_cv_prog_gcc" 1>&6 + test -n "$ac_ct_CC" && break +done -if test $ac_cv_prog_gcc = yes; then - GCC=yes + CC=$ac_ct_CC +fi + +fi + + +test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH +See \`config.log' for more details." >&5 +echo "$as_me: error: no acceptable C compiler found in \$PATH +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } + +# Provide some information about the compiler. +echo "$as_me:$LINENO:" \ + "checking for C compiler version" >&5 +ac_compiler=`set X $ac_compile; echo $2` +{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5 + (eval $ac_compiler --version </dev/null >&5) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5 + (eval $ac_compiler -v </dev/null >&5) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5 + (eval $ac_compiler -V </dev/null >&5) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files a.out a.exe b.out" +# Try to create an executable without -o first, disregard a.out. +# It will help us diagnose broken compilers, and finding out an intuition +# of exeext. +echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 +echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6 +ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` +if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5 + (eval $ac_link_default) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + # Find the output, starting from the most likely. This scheme is +# not robust to junk in `.', hence go to wildcards (a.*) only as a last +# resort. + +# Be careful to initialize this variable, since it used to be cached. +# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile. +ac_cv_exeext= +# b.out is created by i960 compilers. +for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out +do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) + ;; + conftest.$ac_ext ) + # This is the source file. + ;; + [ab].out ) + # We found the default executable, but exeext='' is most + # certainly right. + break;; + *.* ) + ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + # FIXME: I believe we export ac_cv_exeext for Libtool, + # but it would be cool to find out if it's true. Does anybody + # maintain Libtool? --akim. + export ac_cv_exeext + break;; + * ) + break;; + esac +done else - GCC= + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { echo "$as_me:$LINENO: error: C compiler cannot create executables +See \`config.log' for more details." >&5 +echo "$as_me: error: C compiler cannot create executables +See \`config.log' for more details." >&2;} + { (exit 77); exit 77; }; } +fi + +ac_exeext=$ac_cv_exeext +echo "$as_me:$LINENO: result: $ac_file" >&5 +echo "${ECHO_T}$ac_file" >&6 + +# Check the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +echo "$as_me:$LINENO: checking whether the C compiler works" >&5 +echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6 +# FIXME: These cross compiler hacks should be removed for Autoconf 3.0 +# If not cross compiling, check that we can run a simple program. +if test "$cross_compiling" != yes; then + if { ac_try='./$ac_file' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + cross_compiling=no + else + if test "$cross_compiling" = maybe; then + cross_compiling=yes + else + { { echo "$as_me:$LINENO: error: cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } + fi + fi fi +echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 + +rm -f a.out a.exe conftest$ac_cv_exeext b.out +ac_clean_files=$ac_clean_files_save +# Check the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 +echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6 +echo "$as_me:$LINENO: result: $cross_compiling" >&5 +echo "${ECHO_T}$cross_compiling" >&6 + +echo "$as_me:$LINENO: checking for suffix of executables" >&5 +echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6 +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + # If both `conftest.exe' and `conftest' are `present' (well, observable) +# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will +# work properly (i.e., refer to `conftest.exe'), while it won't with +# `rm'. +for ac_file in conftest.exe conftest conftest.*; do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;; + *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + export ac_cv_exeext + break;; + * ) break;; + esac +done +else + { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +fi + +rm -f conftest$ac_cv_exeext +echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 +echo "${ECHO_T}$ac_cv_exeext" >&6 + +rm -f conftest.$ac_ext +EXEEXT=$ac_cv_exeext +ac_exeext=$EXEEXT +echo "$as_me:$LINENO: checking for suffix of object files" >&5 +echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6 +if test "${ac_cv_objext+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ -ac_test_CFLAGS="${CFLAGS+set}" -ac_save_CFLAGS="$CFLAGS" -CFLAGS= -echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:728: checking whether ${CC-cc} accepts -g" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 + ; + return 0; +} +_ACEOF +rm -f conftest.o conftest.obj +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;; + *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` + break;; + esac +done else - echo 'void f(){}' > conftest.c -if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot compute suffix of object files: cannot compile +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +fi + +rm -f conftest.$ac_cv_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 +echo "${ECHO_T}$ac_cv_objext" >&6 +OBJEXT=$ac_cv_objext +ac_objext=$OBJEXT +echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 +echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6 +if test "${ac_cv_c_compiler_gnu+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ +#ifndef __GNUC__ + choke me +#endif + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_compiler_gnu=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_compiler_gnu=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +ac_cv_c_compiler_gnu=$ac_compiler_gnu + +fi +echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 +echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 +GCC=`test $ac_compiler_gnu = yes && echo yes` +ac_test_CFLAGS=${CFLAGS+set} +ac_save_CFLAGS=$CFLAGS +CFLAGS="-g" +echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 +echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 +if test "${ac_cv_prog_cc_g+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then ac_cv_prog_cc_g=yes else - ac_cv_prog_cc_g=no -fi -rm -f conftest* + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 +ac_cv_prog_cc_g=no fi - -echo "$ac_t""$ac_cv_prog_cc_g" 1>&6 +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 +echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 if test "$ac_test_CFLAGS" = set; then - CFLAGS="$ac_save_CFLAGS" + CFLAGS=$ac_save_CFLAGS elif test $ac_cv_prog_cc_g = yes; then if test "$GCC" = yes; then - CFLAGS="-g -O2 -Wall" + CFLAGS="-g -O2" else CFLAGS="-g" fi @@ -754,6 +1959,265 @@ else CFLAGS= fi fi +echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 +echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 +if test "${ac_cv_prog_cc_stdc+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_prog_cc_stdc=no +ac_save_CC=$CC +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <stdarg.h> +#include <stdio.h> +#include <sys/types.h> +#include <sys/stat.h> +/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ +struct buf { int x; }; +FILE * (*rcsopen) (struct buf *, struct stat *, int); +static char *e (p, i) + char **p; + int i; +{ + return p[i]; +} +static char *f (char * (*g) (char **, int), char **p, ...) +{ + char *s; + va_list v; + va_start (v,p); + s = g (p, va_arg (v,int)); + va_end (v); + return s; +} + +/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has + function prototypes and stuff, but not '\xHH' hex character constants. + These don't provoke an error unfortunately, instead are silently treated + as 'x'. The following induces an error, until -std1 is added to get + proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an + array size at least. It's necessary to write '\x00'==0 to get something + that's true only with -std1. */ +int osf4_cc_array ['\x00' == 0 ? 1 : -1]; + +int test (int i, double x); +struct s1 {int (*f) (int a);}; +struct s2 {int (*f) (double a);}; +int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); +int argc; +char **argv; +int +main () +{ +return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; + ; + return 0; +} +_ACEOF +# Don't try gcc -ansi; that turns off useful extensions and +# breaks some systems' header files. +# AIX -qlanglvl=ansi +# Ultrix and OSF/1 -std1 +# HP-UX 10.20 and later -Ae +# HP-UX older versions -Aa -D_HPUX_SOURCE +# SVR4 -Xc -D__EXTENSIONS__ +for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +do + CC="$ac_save_CC $ac_arg" + rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_prog_cc_stdc=$ac_arg +break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext +done +rm -f conftest.$ac_ext conftest.$ac_objext +CC=$ac_save_CC + +fi + +case "x$ac_cv_prog_cc_stdc" in + x|xno) + echo "$as_me:$LINENO: result: none needed" >&5 +echo "${ECHO_T}none needed" >&6 ;; + *) + echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 +echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 + CC="$CC $ac_cv_prog_cc_stdc" ;; +esac + +# Some people use a C++ compiler to compile C. Since we use `exit', +# in C++ we need to declare it. In case someone uses the same compiler +# for both compiling C and C++ we need to have the C++ compiler decide +# the declaration of exit, since it's the most demanding environment. +cat >conftest.$ac_ext <<_ACEOF +#ifndef __cplusplus + choke me +#endif +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + for ac_declaration in \ + '' \ + 'extern "C" void std::exit (int) throw (); using std::exit;' \ + 'extern "C" void std::exit (int); using std::exit;' \ + 'extern "C" void exit (int) throw ();' \ + 'extern "C" void exit (int);' \ + 'void exit (int);' +do + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_declaration +#include <stdlib.h> +int +main () +{ +exit (42); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + : +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +continue +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_declaration +int +main () +{ +exit (42); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +done +rm -f conftest* +if test -n "$ac_declaration"; then + echo '#ifdef __cplusplus' >>confdefs.h + echo $ac_declaration >>confdefs.h + echo '#endif' >>confdefs.h +fi + +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu ac_aux_dir= for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do @@ -765,14 +2229,20 @@ for ac_dir in $srcdir $srcdir/.. $srcdir ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install.sh -c" break + elif test -f $ac_dir/shtool; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/shtool install -c" + break fi done if test -z "$ac_aux_dir"; then - { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; } -fi -ac_config_guess=$ac_aux_dir/config.guess -ac_config_sub=$ac_aux_dir/config.sub -ac_configure=$ac_aux_dir/configure # This should be Cygnus configure. + { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5 +echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;} + { (exit 1); exit 1; }; } +fi +ac_config_guess="$SHELL $ac_aux_dir/config.guess" +ac_config_sub="$SHELL $ac_aux_dir/config.sub" +ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure. # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or @@ -781,206 +2251,411 @@ ac_configure=$ac_aux_dir/configure # Thi # SunOS /usr/etc/install # IRIX /sbin/install # AIX /bin/install +# AmigaOS /C/install, which installs bootblocks on floppy discs # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag # AFS /usr/afsws/bin/install, which mishandles nonexistent args # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# OS/2's system install, which has a completely different semantic # ./install, which can be erroneously created by make from ./install.sh. -echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:790: checking for a BSD compatible install" >&5 +echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 +echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 if test -z "$INSTALL"; then -if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 +if test "${ac_cv_path_install+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else - IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":" - for ac_dir in $PATH; do - # Account for people who put trailing slashes in PATH elements. - case "$ac_dir/" in - /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;; - *) - # OSF1 and SCO ODT 3.0 have their own names for install. - # Don't use installbsd from OSF since it installs stuff as root - # by default. - for ac_prog in ginstall scoinst install; do - if test -f $ac_dir/$ac_prog; then + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + # Account for people who put trailing slashes in PATH elements. +case $as_dir/ in + ./ | .// | /cC/* | \ + /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ + ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ + /usr/ucb/* ) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then if test $ac_prog = install && - grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. : + elif test $ac_prog = install && + grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # program-specific install script used by HP pwplus--don't use. + : else - ac_cv_path_install="$ac_dir/$ac_prog -c" - break 2 + ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" + break 3 fi fi done - ;; - esac - done - IFS="$ac_save_IFS" + done + ;; +esac +done + fi if test "${ac_cv_path_install+set}" = set; then - INSTALL="$ac_cv_path_install" + INSTALL=$ac_cv_path_install else # As a last resort, use the slow shell script. We don't cache a # path for INSTALL within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the path is relative. - INSTALL="$ac_install_sh" + INSTALL=$ac_install_sh fi fi -echo "$ac_t""$INSTALL" 1>&6 +echo "$as_me:$LINENO: result: $INSTALL" >&5 +echo "${ECHO_T}$INSTALL" >&6 # Use test -z because SunOS4 sh mishandles braces in ${var-val}. # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' -test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' -echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6 -echo "configure:843: checking whether ln -s works" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 +echo "$as_me:$LINENO: checking whether ln -s works" >&5 +echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6 +LN_S=$as_ln_s +if test "$LN_S" = "ln -s"; then + echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 else - rm -f conftestdata -if ln -s X conftestdata 2>/dev/null -then - rm -f conftestdata - ac_cv_prog_LN_S="ln -s" -else - ac_cv_prog_LN_S=ln -fi -fi -LN_S="$ac_cv_prog_LN_S" -if test "$ac_cv_prog_LN_S" = "ln -s"; then - echo "$ac_t""yes" 1>&6 -else - echo "$ac_t""no" 1>&6 + echo "$as_me:$LINENO: result: no, using $LN_S" >&5 +echo "${ECHO_T}no, using $LN_S" >&6 fi -echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 -echo "configure:866: checking how to run the C preprocessor" >&5 + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 +echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= fi if test -z "$CPP"; then -if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 + if test "${ac_cv_prog_CPP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else - # This must be in double quotes, not single quotes, because CPP may get - # substituted into the Makefile and "${CC-cc}" will confuse make. - CPP="${CC-cc} -E" + # Double quotes because CPP needs to be expanded + for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" + do + ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since + # <limits.h> exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. - cat > conftest.$ac_ext <<EOF -#line 881 "configure" -#include "confdefs.h" -#include <assert.h> -Syntax Error -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:887: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` -if test -z "$ac_err"; then - : + # not just through cpp. "Syntax error" is here to catch this case. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef __STDC__ +# include <limits.h> +#else +# include <assert.h> +#endif + Syntax error +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - CPP="${CC-cc} -E -traditional-cpp" - cat > conftest.$ac_ext <<EOF -#line 898 "configure" -#include "confdefs.h" -#include <assert.h> -Syntax Error -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:904: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` -if test -z "$ac_err"; then + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then : else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - CPP="${CC-cc} -nologo -E" - cat > conftest.$ac_ext <<EOF -#line 915 "configure" -#include "confdefs.h" -#include <assert.h> -Syntax Error -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:921: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` -if test -z "$ac_err"; then - : + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.$ac_ext + + # OK, works on sane cases. Now check whether non-existent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <ac_nonexistent.h> +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - CPP=/lib/cpp + ac_cpp_err=yes fi -rm -f conftest* +if test -z "$ac_cpp_err"; then + # Broken: success on invalid input. +continue +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Passes both tests. +ac_preproc_ok=: +break fi -rm -f conftest* +rm -f conftest.err conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then + break fi -rm -f conftest* - ac_cv_prog_CPP="$CPP" + + done + ac_cv_prog_CPP=$CPP + fi - CPP="$ac_cv_prog_CPP" + CPP=$ac_cv_prog_CPP else - ac_cv_prog_CPP="$CPP" + ac_cv_prog_CPP=$CPP fi -echo "$ac_t""$CPP" 1>&6 +echo "$as_me:$LINENO: result: $CPP" >&5 +echo "${ECHO_T}$CPP" >&6 +ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since + # <limits.h> exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef __STDC__ +# include <limits.h> +#else +# include <assert.h> +#endif + Syntax error +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + : +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 -echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 -echo "configure:946: checking for ANSI C header files" >&5 -if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.$ac_ext + + # OK, works on sane cases. Now check whether non-existent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <ac_nonexistent.h> +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + # Broken: success on invalid input. +continue +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then + : else - cat > conftest.$ac_ext <<EOF -#line 951 "configure" -#include "confdefs.h" + { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details." >&5 +echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +echo "$as_me:$LINENO: checking for egrep" >&5 +echo $ECHO_N "checking for egrep... $ECHO_C" >&6 +if test "${ac_cv_prog_egrep+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if echo a | (grep -E '(a|b)') >/dev/null 2>&1 + then ac_cv_prog_egrep='grep -E' + else ac_cv_prog_egrep='egrep' + fi +fi +echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5 +echo "${ECHO_T}$ac_cv_prog_egrep" >&6 + EGREP=$ac_cv_prog_egrep + + +echo "$as_me:$LINENO: checking for ANSI C header files" >&5 +echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 +if test "${ac_cv_header_stdc+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include <stdlib.h> #include <stdarg.h> #include <string.h> #include <float.h> -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:959: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` -if test -z "$ac_err"; then - rm -rf conftest* + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then ac_cv_header_stdc=yes else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ac_cv_header_stdc=no + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_header_stdc=no fi -rm -f conftest* +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. -cat > conftest.$ac_ext <<EOF -#line 976 "configure" -#include "confdefs.h" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include <string.h> -EOF + +_ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "memchr" >/dev/null 2>&1; then + $EGREP "memchr" >/dev/null 2>&1; then : else - rm -rf conftest* ac_cv_header_stdc=no fi rm -f conftest* @@ -989,16 +2664,19 @@ fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. -cat > conftest.$ac_ext <<EOF -#line 994 "configure" -#include "confdefs.h" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include <stdlib.h> -EOF + +_ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "free" >/dev/null 2>&1; then + $EGREP "free" >/dev/null 2>&1; then : else - rm -rf conftest* ac_cv_header_stdc=no fi rm -f conftest* @@ -1007,332 +2685,786 @@ fi if test $ac_cv_header_stdc = yes; then # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. -if test "$cross_compiling" = yes; then + if test "$cross_compiling" = yes; then : else - cat > conftest.$ac_ext <<EOF -#line 1015 "configure" -#include "confdefs.h" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include <ctype.h> -#define ISLOWER(c) ('a' <= (c) && (c) <= 'z') -#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#if ((' ' & 0x0FF) == 0x020) +# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#else +# define ISLOWER(c) \ + (('a' <= (c) && (c) <= 'i') \ + || ('j' <= (c) && (c) <= 'r') \ + || ('s' <= (c) && (c) <= 'z')) +# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) +#endif + #define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) -int main () { int i; for (i = 0; i < 256; i++) -if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); -exit (0); } - -EOF -if { (eval echo configure:1026: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null -then +int +main () +{ + int i; + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) + exit(2); + exit (0); +} +_ACEOF +rm -f conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then : else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -fr conftest* - ac_cv_header_stdc=no + echo "$as_me: program exited with status $ac_status" >&5 +echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +ac_cv_header_stdc=no fi -rm -fr conftest* +rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi - fi fi - -echo "$ac_t""$ac_cv_header_stdc" 1>&6 +echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 +echo "${ECHO_T}$ac_cv_header_stdc" >&6 if test $ac_cv_header_stdc = yes; then - cat >> confdefs.h <<\EOF + +cat >>confdefs.h <<\_ACEOF #define STDC_HEADERS 1 -EOF +_ACEOF fi -for ac_hdr in limits.h strings.h syslog.h unistd.h +# On IRIX 5.3, sys/types and inttypes.h are conflicting. + + + + + + + + + +for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ + inttypes.h stdint.h unistd.h do -ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` -echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:1053: checking for $ac_hdr" >&5 -if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 1058 "configure" -#include "confdefs.h" -#include <$ac_hdr> -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1063: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` -if test -z "$ac_err"; then - rm -rf conftest* - eval "ac_cv_header_$ac_safe=yes" -else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_header_$ac_safe=no" +as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default + +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + eval "$as_ac_Header=yes" +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +eval "$as_ac_Header=no" +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + fi -rm -f conftest* + +done + + + + + + +for ac_header in limits.h strings.h syslog.h unistd.h +do +as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking $ac_header usability" >&5 +echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking $ac_header presence" >&5 +echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <$ac_header> +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes fi -if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then - echo "$ac_t""yes" 1>&6 - ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` - cat >> confdefs.h <<EOF -#define $ac_tr_hdr 1 -EOF - -else - echo "$ac_t""no" 1>&6 +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 +echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------------ ## +## Report this to the AC_PACKAGE_NAME lists. ## +## ------------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + eval "$as_ac_Header=\$ac_header_preproc" +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 + +fi +if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + fi + done -echo $ac_n "checking for obsolete openlog""... $ac_c" 1>&6 -echo "configure:1092: checking for obsolete openlog" >&5 -if eval "test \"`echo '$''{'ssmtp_cv_obsolete_openlog'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 1097 "configure" -#include "confdefs.h" -#include <syslog.h> -int main() { - openlog("xx",1); -; return 0; } -EOF -if { (eval echo configure:1104: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* +echo "$as_me:$LINENO: checking for obsolete openlog" >&5 +echo $ECHO_N "checking for obsolete openlog... $ECHO_C" >&6 +if test "${ssmtp_cv_obsolete_openlog+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <syslog.h> +int +main () +{ + openlog("xx",1); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then ssmtp_cv_obsolete_openlog=yes else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ssmtp_cv_obsolete_openlog=no -fi -rm -f conftest* + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 +ssmtp_cv_obsolete_openlog=no fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -echo "$ac_t""$ssmtp_cv_obsolete_openlog" 1>&6 - +fi +echo "$as_me:$LINENO: result: $ssmtp_cv_obsolete_openlog" >&5 +echo "${ECHO_T}$ssmtp_cv_obsolete_openlog" >&6 + + +echo "$as_me:$LINENO: checking for an ANSI C-conforming const" >&5 +echo $ECHO_N "checking for an ANSI C-conforming const... $ECHO_C" >&6 +if test "${ac_cv_c_const+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ +/* FIXME: Include the comments suggested by Paul. */ +#ifndef __cplusplus + /* Ultrix mips cc rejects this. */ + typedef int charset[2]; + const charset x; + /* SunOS 4.1.1 cc rejects this. */ + char const *const *ccp; + char **p; + /* NEC SVR4.0.2 mips cc rejects this. */ + struct point {int x, y;}; + static struct point const zero = {0,0}; + /* AIX XL C 1.02.0.0 rejects this. + It does not let you subtract one const X* pointer from another in + an arm of an if-expression whose if-part is not a constant + expression */ + const char *g = "string"; + ccp = &g + (g ? g-g : 0); + /* HPUX 7.0 cc rejects these. */ + ++ccp; + p = (char**) ccp; + ccp = (char const *const *) p; + { /* SCO 3.2v4 cc rejects this. */ + char *t; + char const *s = 0 ? (char *) 0 : (char const *) 0; + + *t++ = 0; + } + { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */ + int x[] = {25, 17}; + const int *foo = &x[0]; + ++foo; + } + { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */ + typedef const int *iptr; + iptr p = 0; + ++p; + } + { /* AIX XL C 1.02.0.0 rejects this saying + "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */ + struct s { int j; const int *ap[3]; }; + struct s *b; b->j = 5; + } + { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ + const int foo = 10; + } +#endif -echo $ac_n "checking for working const""... $ac_c" 1>&6 -echo "configure:1121: checking for working const" >&5 -if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 1126 "configure" -#include "confdefs.h" - -int main() { - -/* Ultrix mips cc rejects this. */ -typedef int charset[2]; const charset x; -/* SunOS 4.1.1 cc rejects this. */ -char const *const *ccp; -char **p; -/* NEC SVR4.0.2 mips cc rejects this. */ -struct point {int x, y;}; -static struct point const zero = {0,0}; -/* AIX XL C 1.02.0.0 rejects this. - It does not let you subtract one const X* pointer from another in an arm - of an if-expression whose if-part is not a constant expression */ -const char *g = "string"; -ccp = &g + (g ? g-g : 0); -/* HPUX 7.0 cc rejects these. */ -++ccp; -p = (char**) ccp; -ccp = (char const *const *) p; -{ /* SCO 3.2v4 cc rejects this. */ - char *t; - char const *s = 0 ? (char *) 0 : (char const *) 0; - - *t++ = 0; -} -{ /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */ - int x[] = {25, 17}; - const int *foo = &x[0]; - ++foo; -} -{ /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */ - typedef const int *iptr; - iptr p = 0; - ++p; -} -{ /* AIX XL C 1.02.0.0 rejects this saying - "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */ - struct s { int j; const int *ap[3]; }; - struct s *b; b->j = 5; -} -{ /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ - const int foo = 10; -} - -; return 0; } -EOF -if { (eval echo configure:1175: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then ac_cv_c_const=yes else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ac_cv_c_const=no + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_c_const=no fi -rm -f conftest* +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi - -echo "$ac_t""$ac_cv_c_const" 1>&6 +echo "$as_me:$LINENO: result: $ac_cv_c_const" >&5 +echo "${ECHO_T}$ac_cv_c_const" >&6 if test $ac_cv_c_const = no; then - cat >> confdefs.h <<\EOF -#define const -EOF + +cat >>confdefs.h <<\_ACEOF +#define const +_ACEOF fi -echo $ac_n "checking whether struct tm is in sys/time.h or time.h""... $ac_c" 1>&6 -echo "configure:1196: checking whether struct tm is in sys/time.h or time.h" >&5 -if eval "test \"`echo '$''{'ac_cv_struct_tm'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 1201 "configure" -#include "confdefs.h" +echo "$as_me:$LINENO: checking whether struct tm is in sys/time.h or time.h" >&5 +echo $ECHO_N "checking whether struct tm is in sys/time.h or time.h... $ECHO_C" >&6 +if test "${ac_cv_struct_tm+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include <sys/types.h> #include <time.h> -int main() { + +int +main () +{ struct tm *tp; tp->tm_sec; -; return 0; } -EOF -if { (eval echo configure:1209: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then ac_cv_struct_tm=time.h else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ac_cv_struct_tm=sys/time.h + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_struct_tm=sys/time.h fi -rm -f conftest* +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi - -echo "$ac_t""$ac_cv_struct_tm" 1>&6 +echo "$as_me:$LINENO: result: $ac_cv_struct_tm" >&5 +echo "${ECHO_T}$ac_cv_struct_tm" >&6 if test $ac_cv_struct_tm = sys/time.h; then - cat >> confdefs.h <<\EOF + +cat >>confdefs.h <<\_ACEOF #define TM_IN_SYS_TIME 1 -EOF +_ACEOF fi -echo $ac_n "checking for gethostname in -lnsl""... $ac_c" 1>&6 -echo "configure:1231: checking for gethostname in -lnsl" >&5 -ac_lib_var=`echo nsl'_'gethostname | sed 'y%./+-%__p_%'` -if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - ac_save_LIBS="$LIBS" -LIBS="-lnsl $LIBS" -cat > conftest.$ac_ext <<EOF -#line 1239 "configure" -#include "confdefs.h" +echo "$as_me:$LINENO: checking for library containing gethostname" >&5 +echo $ECHO_N "checking for library containing gethostname... $ECHO_C" >&6 +if test "${ac_cv_search_gethostname+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_func_search_save_LIBS=$LIBS +ac_cv_search_gethostname=no +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char gethostname (); +int +main () +{ +gethostname (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_search_gethostname="none required" +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +if test "$ac_cv_search_gethostname" = no; then + for ac_lib in nsl; do + LIBS="-l$ac_lib $ac_func_search_save_LIBS" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + /* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif /* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char gethostname(); + builtin and then its argument prototype would still apply. */ +char gethostname (); +int +main () +{ +gethostname (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_search_gethostname="-l$ac_lib" +break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 -int main() { -gethostname() -; return 0; } -EOF -if { (eval echo configure:1250: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=yes" -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=no" fi -rm -f conftest* -LIBS="$ac_save_LIBS" +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + done +fi +LIBS=$ac_func_search_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_search_gethostname" >&5 +echo "${ECHO_T}$ac_cv_search_gethostname" >&6 +if test "$ac_cv_search_gethostname" != no; then + test "$ac_cv_search_gethostname" = "none required" || LIBS="$ac_cv_search_gethostname $LIBS" fi -if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then - echo "$ac_t""yes" 1>&6 - ac_tr_lib=HAVE_LIB`echo nsl | sed -e 's/[^a-zA-Z0-9_]/_/g' \ - -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'` - cat >> confdefs.h <<EOF -#define $ac_tr_lib 1 -EOF - LIBS="-lnsl $LIBS" +echo "$as_me:$LINENO: checking for library containing socket" >&5 +echo $ECHO_N "checking for library containing socket... $ECHO_C" >&6 +if test "${ac_cv_search_socket+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_func_search_save_LIBS=$LIBS +ac_cv_search_socket=no +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ -else - echo "$ac_t""no" 1>&6 -fi +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char socket (); +int +main () +{ +socket (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_search_socket="none required" +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +if test "$ac_cv_search_socket" = no; then + for ac_lib in socket; do + LIBS="-l$ac_lib $ac_func_search_save_LIBS" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ -echo $ac_n "checking for socket in -lsocket""... $ac_c" 1>&6 -echo "configure:1278: checking for socket in -lsocket" >&5 -ac_lib_var=`echo socket'_'socket | sed 'y%./+-%__p_%'` -if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - ac_save_LIBS="$LIBS" -LIBS="-lsocket $LIBS" -cat > conftest.$ac_ext <<EOF -#line 1286 "configure" -#include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif /* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char socket(); + builtin and then its argument prototype would still apply. */ +char socket (); +int +main () +{ +socket (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_search_socket="-l$ac_lib" +break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 -int main() { -socket() -; return 0; } -EOF -if { (eval echo configure:1297: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=yes" -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=no" fi -rm -f conftest* -LIBS="$ac_save_LIBS" - +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + done fi -if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then - echo "$ac_t""yes" 1>&6 - ac_tr_lib=HAVE_LIB`echo socket | sed -e 's/[^a-zA-Z0-9_]/_/g' \ - -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'` - cat >> confdefs.h <<EOF -#define $ac_tr_lib 1 -EOF - - LIBS="-lsocket $LIBS" +LIBS=$ac_func_search_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_search_socket" >&5 +echo "${ECHO_T}$ac_cv_search_socket" >&6 +if test "$ac_cv_search_socket" != no; then + test "$ac_cv_search_socket" = "none required" || LIBS="$ac_cv_search_socket $LIBS" -else - echo "$ac_t""no" 1>&6 fi -echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6 -echo "configure:1326: checking return type of signal handlers" >&5 -if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 +echo "$as_me:$LINENO: checking return type of signal handlers" >&5 +echo $ECHO_N "checking return type of signal handlers... $ECHO_C" >&6 +if test "${ac_cv_type_signal+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else - cat > conftest.$ac_ext <<EOF -#line 1331 "configure" -#include "confdefs.h" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include <sys/types.h> #include <signal.h> #ifdef signal -#undef signal +# undef signal #endif #ifdef __cplusplus extern "C" void (*signal (int, void (*)(int)))(int); @@ -1340,185 +3472,352 @@ extern "C" void (*signal (int, void (*)( void (*signal ()) (); #endif -int main() { +int +main () +{ int i; -; return 0; } -EOF -if { (eval echo configure:1348: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then ac_cv_type_signal=void else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ac_cv_type_signal=int + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_type_signal=int fi -rm -f conftest* +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi +echo "$as_me:$LINENO: result: $ac_cv_type_signal" >&5 +echo "${ECHO_T}$ac_cv_type_signal" >&6 -echo "$ac_t""$ac_cv_type_signal" 1>&6 -cat >> confdefs.h <<EOF +cat >>confdefs.h <<_ACEOF #define RETSIGTYPE $ac_cv_type_signal -EOF +_ACEOF -echo $ac_n "checking for vprintf""... $ac_c" 1>&6 -echo "configure:1367: checking for vprintf" >&5 -if eval "test \"`echo '$''{'ac_cv_func_vprintf'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 1372 "configure" -#include "confdefs.h" + +for ac_func in vprintf +do +as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` +echo "$as_me:$LINENO: checking for $ac_func" >&5 +echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 +if eval "test \"\${$as_ac_var+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func. + For example, HP-UX 11i <limits.h> declares gettimeofday. */ +#define $ac_func innocuous_$ac_func + /* System header to define __stub macros and hopefully few prototypes, - which can conflict with char vprintf(); below. */ -#include <assert.h> -/* Override any gcc2 internal prototype to avoid an error. */ -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char vprintf(); + which can conflict with char $ac_func (); below. + Prefer <limits.h> to <assert.h> if __STDC__ is defined, since + <limits.h> exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include <limits.h> +#else +# include <assert.h> +#endif -int main() { +#undef $ac_func +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char $ac_func (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ -#if defined (__stub_vprintf) || defined (__stub___vprintf) +#if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else -vprintf(); +char (*f) () = $ac_func; +#endif +#ifdef __cplusplus +} #endif -; return 0; } -EOF -if { (eval echo configure:1395: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - rm -rf conftest* - eval "ac_cv_func_vprintf=yes" -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_func_vprintf=no" -fi -rm -f conftest* -fi +int +main () +{ +return f != $ac_func; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + eval "$as_ac_var=yes" +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +eval "$as_ac_var=no" +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 +if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF + +echo "$as_me:$LINENO: checking for _doprnt" >&5 +echo $ECHO_N "checking for _doprnt... $ECHO_C" >&6 +if test "${ac_cv_func__doprnt+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define _doprnt to an innocuous variant, in case <limits.h> declares _doprnt. + For example, HP-UX 11i <limits.h> declares gettimeofday. */ +#define _doprnt innocuous__doprnt -if eval "test \"`echo '$ac_cv_func_'vprintf`\" = yes"; then - echo "$ac_t""yes" 1>&6 - cat >> confdefs.h <<\EOF -#define HAVE_VPRINTF 1 -EOF +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char _doprnt (); below. + Prefer <limits.h> to <assert.h> if __STDC__ is defined, since + <limits.h> exists even on freestanding compilers. */ -else - echo "$ac_t""no" 1>&6 -fi +#ifdef __STDC__ +# include <limits.h> +#else +# include <assert.h> +#endif + +#undef _doprnt -if test "$ac_cv_func_vprintf" != yes; then -echo $ac_n "checking for _doprnt""... $ac_c" 1>&6 -echo "configure:1419: checking for _doprnt" >&5 -if eval "test \"`echo '$''{'ac_cv_func__doprnt'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 1424 "configure" -#include "confdefs.h" -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char _doprnt(); below. */ -#include <assert.h> /* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif /* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char _doprnt(); - -int main() { - + builtin and then its argument prototype would still apply. */ +char _doprnt (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub__doprnt) || defined (__stub____doprnt) choke me #else -_doprnt(); +char (*f) () = _doprnt; +#endif +#ifdef __cplusplus +} #endif -; return 0; } -EOF -if { (eval echo configure:1447: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - rm -rf conftest* - eval "ac_cv_func__doprnt=yes" -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_func__doprnt=no" -fi -rm -f conftest* -fi +int +main () +{ +return f != _doprnt; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_func__doprnt=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_func__doprnt=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_func__doprnt" >&5 +echo "${ECHO_T}$ac_cv_func__doprnt" >&6 +if test $ac_cv_func__doprnt = yes; then -if eval "test \"`echo '$ac_cv_func_'_doprnt`\" = yes"; then - echo "$ac_t""yes" 1>&6 - cat >> confdefs.h <<\EOF +cat >>confdefs.h <<\_ACEOF #define HAVE_DOPRNT 1 -EOF +_ACEOF -else - echo "$ac_t""no" 1>&6 fi fi +done + + + + + for ac_func in gethostname socket strdup strstr do -echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:1474: checking for $ac_func" >&5 -if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 1479 "configure" -#include "confdefs.h" +as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` +echo "$as_me:$LINENO: checking for $ac_func" >&5 +echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 +if eval "test \"\${$as_ac_var+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func. + For example, HP-UX 11i <limits.h> declares gettimeofday. */ +#define $ac_func innocuous_$ac_func + /* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func(); below. */ -#include <assert.h> -/* Override any gcc2 internal prototype to avoid an error. */ -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char $ac_func(); + which can conflict with char $ac_func (); below. + Prefer <limits.h> to <assert.h> if __STDC__ is defined, since + <limits.h> exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include <limits.h> +#else +# include <assert.h> +#endif -int main() { +#undef $ac_func +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char $ac_func (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else -$ac_func(); +char (*f) () = $ac_func; +#endif +#ifdef __cplusplus +} #endif -; return 0; } -EOF -if { (eval echo configure:1502: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - rm -rf conftest* - eval "ac_cv_func_$ac_func=yes" -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_func_$ac_func=no" -fi -rm -f conftest* -fi +int +main () +{ +return f != $ac_func; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + eval "$as_ac_var=yes" +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +eval "$as_ac_var=no" +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 +if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF -if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then - echo "$ac_t""yes" 1>&6 - ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` - cat >> confdefs.h <<EOF -#define $ac_tr_func 1 -EOF - -else - echo "$ac_t""no" 1>&6 fi done @@ -1526,13 +3825,12 @@ done # Check whether --enable-logfile or --disable-logfile was given. if test "${enable_logfile+set}" = set; then enableval="$enable_logfile" - : -fi +fi; if test x$enableval = xyes ; then - cat >> confdefs.h <<\EOF + cat >>confdefs.h <<\_ACEOF #define LOGFILE 1 -EOF +_ACEOF fi enableval="" @@ -1540,13 +3838,12 @@ enableval="" # Check whether --enable-rewrite-domain or --disable-rewrite-domain was given. if test "${enable_rewrite_domain+set}" = set; then enableval="$enable_rewrite_domain" - : -fi +fi; if test x$enableval != xno ; then - cat >> confdefs.h <<\EOF + cat >>confdefs.h <<\_ACEOF #define REWRITE_DOMAIN 1 -EOF +_ACEOF fi enableval="" @@ -1554,308 +3851,1042 @@ enableval="" # Check whether --enable-ssl or --disable-ssl was given. if test "${enable_ssl+set}" = set; then enableval="$enable_ssl" - : -fi +fi; if test x$enableval = xyes ; then - cat >> confdefs.h <<\EOF + cat >>confdefs.h <<\_ACEOF #define HAVE_SSL 1 -EOF +_ACEOF - LIBS="$LIBS -lssl" + LIBS="$LIBS -lssl -lcrypto" fi enableval="" # Check whether --enable-inet6 or --disable-inet6 was given. if test "${enable_inet6+set}" = set; then enableval="$enable_inet6" - : -fi +fi; if test x$enableval = xyes ; then - cat >> confdefs.h <<\EOF + cat >>confdefs.h <<\_ACEOF #define INET6 1 -EOF +_ACEOF fi enableval="" + +# This macro can be removed once we can rely on Autoconf 2.57a or later, +# since we can then use its AC_C_RESTRICT. + +# gl_C_RESTRICT +# -------------- +# Determine whether the C/C++ compiler supports the "restrict" keyword +# introduced in ANSI C99, or an equivalent. Do nothing if the compiler +# accepts it. Otherwise, if the compiler supports an equivalent, +# define "restrict" to be that. Here are some variants: +# - GCC supports both __restrict and __restrict__ +# - older DEC Alpha C compilers support only __restrict +# - _Restrict is the only spelling accepted by Sun WorkShop 6 update 2 C +# Otherwise, define "restrict" to be empty. + + +echo "$as_me:$LINENO: checking for C/C++ restrict keyword" >&5 +echo $ECHO_N "checking for C/C++ restrict keyword... $ECHO_C" >&6 +if test "${gl_cv_c_restrict+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + gl_cv_c_restrict=no + # Try the official restrict keyword, then gcc's __restrict, and + # the less common variants. + for ac_kw in restrict __restrict __restrict__ _Restrict; do + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +float * $ac_kw x; +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + gl_cv_c_restrict=$ac_kw; break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + done + +fi +echo "$as_me:$LINENO: result: $gl_cv_c_restrict" >&5 +echo "${ECHO_T}$gl_cv_c_restrict" >&6 + case $gl_cv_c_restrict in + restrict) ;; + no) +cat >>confdefs.h <<\_ACEOF +#define restrict +_ACEOF + ;; + *) cat >>confdefs.h <<_ACEOF +#define restrict $gl_cv_c_restrict +_ACEOF + ;; + esac + # Check whether --enable-md5auth or --disable-md5auth was given. if test "${enable_md5auth+set}" = set; then enableval="$enable_md5auth" - : -fi +fi; if test x$enableval = xyes ; then - cat >> confdefs.h <<\EOF + cat >>confdefs.h <<\_ACEOF #define MD5AUTH 1 -EOF +_ACEOF - SRCS="$SRCS md5auth/md5c.c md5auth/hmac_md5.c" + SRCS="$SRCS md5auth/md5.c md5auth/hmac-md5.c md5auth/memxor.c" fi enableval="" -trap '' 1 2 15 -cat > confcache <<\EOF + + ac_config_files="$ac_config_files Makefile" +cat >confcache <<\_ACEOF # This file is a shell script that caches the results of configure # tests run on this system so they can be shared between configure -# scripts and configure runs. It is not useful on other systems. -# If it contains results you don't want to keep, you may remove or edit it. +# scripts and configure runs, see configure's option --config-cache. +# It is not useful on other systems. If it contains results you don't +# want to keep, you may remove or edit it. # -# By default, configure uses ./config.cache as the cache file, -# creating it if it does not exist already. You can give configure -# the --cache-file=FILE option to use a different cache file; that is -# what configure does when it calls configure scripts in -# subdirectories, so they share the cache. -# Giving --cache-file=/dev/null disables caching, for debugging configure. -# config.status only pays attention to the cache file if you give it the -# --recheck option to rerun configure. +# config.status only pays attention to the cache file if you give it +# the --recheck option to rerun configure. # -EOF +# `ac_cv_env_foo' variables (set or unset) will be overridden when +# loading this file, other *unset* `ac_cv_foo' will be assigned the +# following values. + +_ACEOF + # The following way of writing the cache mishandles newlines in values, # but we know of no workaround that is simple, portable, and efficient. # So, don't put newlines in cache variables' values. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. -(set) 2>&1 | - case `(ac_space=' '; set | grep ac_space) 2>&1` in - *ac_space=\ *) - # `set' does not quote correctly, so add quotes (double-quote substitution - # turns \\\\ into \\, and sed turns \\ into \). - sed -n \ - -e "s/'/'\\\\''/g" \ - -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p" - ;; - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p' - ;; - esac >> confcache -if cmp -s $cache_file confcache; then - : -else +{ + (set) 2>&1 | + case `(ac_space=' '; set | grep ac_space) 2>&1` in + *ac_space=\ *) + # `set' does not quote correctly, so add quotes (double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \). + sed -n \ + "s/'/'\\\\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" + ;; + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n \ + "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" + ;; + esac; +} | + sed ' + t clear + : clear + s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ + t end + /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ + : end' >>confcache +if diff $cache_file confcache >/dev/null 2>&1; then :; else if test -w $cache_file; then - echo "updating cache $cache_file" - cat confcache > $cache_file + test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" + cat confcache >$cache_file else echo "not updating unwritable cache $cache_file" fi fi rm -f confcache -trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 - test "x$prefix" = xNONE && prefix=$ac_default_prefix # Let make expand exec_prefix. test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' -# Any assignment to VPATH causes Sun make to only execute -# the first set of double-colon rules, so remove it if not needed. -# If there is a colon in the path, we need to keep it. +# VPATH may cause trouble with some makes, so we remove $(srcdir), +# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and +# trailing colons and then remove the whole line if VPATH becomes empty +# (actually we leave an empty line to preserve line numbers). if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d' + ac_vpsub='/^[ ]*VPATH[ ]*=/{ +s/:*\$(srcdir):*/:/; +s/:*\${srcdir}:*/:/; +s/:*@srcdir@:*/:/; +s/^\([^=]*=[ ]*\):*/\1/; +s/:*$//; +s/^[^=]*=[ ]*$//; +}' fi -trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15 - # Transform confdefs.h into DEFS. # Protect against shell expansion while executing Makefile rules. # Protect against Makefile macro expansion. -cat > conftest.defs <<\EOF -s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g -s%[ `~#$^&*(){}\\|;'"<>?]%\\&%g -s%\[%\\&%g -s%\]%\\&%g -s%\$%$$%g -EOF -DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '` -rm -f conftest.defs +# +# If the first sed substitution is executed (which looks for macros that +# take arguments), then we branch to the quote section. Otherwise, +# look for a macro that doesn't take arguments. +cat >confdef2opt.sed <<\_ACEOF +t clear +: clear +s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\),-D\1=\2,g +t quote +s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\),-D\1=\2,g +t quote +d +: quote +s,[ `~#$^&*(){}\\|;'"<>?],\\&,g +s,\[,\\&,g +s,\],\\&,g +s,\$,$$,g +p +_ACEOF +# We use echo to avoid assuming a particular line-breaking character. +# The extra dot is to prevent the shell from consuming trailing +# line-breaks from the sub-command output. A line-break within +# single-quotes doesn't work because, if this script is created in a +# platform that uses two characters for line-breaks (e.g., DOS), tr +# would break. +ac_LF_and_DOT=`echo; echo .` +DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'` +rm -f confdef2opt.sed + + +ac_libobjs= +ac_ltlibobjs= +for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. + ac_i=`echo "$ac_i" | + sed 's/\$U\././;s/\.o$//;s/\.obj$//'` + # 2. Add them. + ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext" + ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo' +done +LIBOBJS=$ac_libobjs +LTLIBOBJS=$ac_ltlibobjs -# Without the "./", some shells look in PATH for config.status. -: ${CONFIG_STATUS=./config.status} -echo creating $CONFIG_STATUS -rm -f $CONFIG_STATUS -cat > $CONFIG_STATUS <<EOF -#! /bin/sh -# Generated automatically by configure. + +: ${CONFIG_STATUS=./config.status} +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files $CONFIG_STATUS" +{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 +echo "$as_me: creating $CONFIG_STATUS" >&6;} +cat >$CONFIG_STATUS <<_ACEOF +#! $SHELL +# Generated by $as_me. # Run this file to recreate the current configuration. -# This directory was configured as follows, -# on host `(hostname || uname -n) 2>/dev/null | sed 1q`: -# -# $0 $ac_configure_args -# # Compiler output produced by configure, useful for debugging -# configure, is in ./config.log if it exists. +# configure, is in config.log if it exists. -ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]" -for ac_option +debug=false +ac_cs_recheck=false +ac_cs_silent=false +SHELL=\${CONFIG_SHELL-$SHELL} +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF +## --------------------- ## +## M4sh Initialization. ## +## --------------------- ## + +# Be Bourne compatible +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' +elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then + set -o posix +fi +DUALCASE=1; export DUALCASE # for MKS sh + +# Support unset when possible. +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + as_unset=unset +else + as_unset=false +fi + + +# Work around bugs in pre-3.0 UWIN ksh. +$as_unset ENV MAIL MAILPATH +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +for as_var in \ + LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ + LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ + LC_TELEPHONE LC_TIME do - case "\$ac_option" in - -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" - exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; - -version | --version | --versio | --versi | --vers | --ver | --ve | --v) - echo "$CONFIG_STATUS generated by autoconf version 2.13" - exit 0 ;; - -help | --help | --hel | --he | --h) - echo "\$ac_cs_usage"; exit 0 ;; - *) echo "\$ac_cs_usage"; exit 1 ;; - esac + if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then + eval $as_var=C; export $as_var + else + $as_unset $as_var + fi done -ac_given_srcdir=$srcdir -ac_given_INSTALL="$INSTALL" +# Required to use basename. +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi -trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15 -EOF -cat >> $CONFIG_STATUS <<EOF - -# Protect against being on the right side of a sed subst in config.status. -sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g; - s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF -$ac_vpsub -$extrasub -s%@SHELL@%$SHELL%g -s%@CFLAGS@%$CFLAGS%g -s%@CPPFLAGS@%$CPPFLAGS%g -s%@CXXFLAGS@%$CXXFLAGS%g -s%@FFLAGS@%$FFLAGS%g -s%@DEFS@%$DEFS%g -s%@LDFLAGS@%$LDFLAGS%g -s%@SRCS@%$SRCS%g -s%@LIBS@%$LIBS%g -s%@exec_prefix@%$exec_prefix%g -s%@prefix@%$prefix%g -s%@program_transform_name@%$program_transform_name%g -s%@bindir@%$bindir%g -s%@sbindir@%$sbindir%g -s%@libexecdir@%$libexecdir%g -s%@datadir@%$datadir%g -s%@sysconfdir@%$sysconfdir%g -s%@sharedstatedir@%$sharedstatedir%g -s%@localstatedir@%$localstatedir%g -s%@libdir@%$libdir%g -s%@includedir@%$includedir%g -s%@oldincludedir@%$oldincludedir%g -s%@infodir@%$infodir%g -s%@mandir@%$mandir%g -s%@CC@%$CC%g -s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g -s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g -s%@INSTALL_DATA@%$INSTALL_DATA%g -s%@LN_S@%$LN_S%g -s%@CPP@%$CPP%g -CEOF -EOF +# Name of the executable. +as_me=`$as_basename "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)$' \| \ + . : '\(.\)' 2>/dev/null || +echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } + /^X\/\(\/\/\)$/{ s//\1/; q; } + /^X\/\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + + +# PATH needs CR, and LINENO needs CR and PATH. +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh +fi -cat >> $CONFIG_STATUS <<\EOF -# Split the substitutions into bite-sized pieces for seds with -# small command number limits, like on Digital OSF/1 and HP-UX. -ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script. -ac_file=1 # Number of current file. -ac_beg=1 # First line for current file. -ac_end=$ac_max_sed_cmds # Line after last line for current file. -ac_more_lines=: -ac_sed_cmds="" -while $ac_more_lines; do - if test $ac_beg -gt 1; then - sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file - else - sed "${ac_end}q" conftest.subs > conftest.s$ac_file - fi - if test ! -s conftest.s$ac_file; then - ac_more_lines=false - rm -f conftest.s$ac_file - else - if test -z "$ac_sed_cmds"; then - ac_sed_cmds="sed -f conftest.s$ac_file" - else - ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file" - fi - ac_file=`expr $ac_file + 1` - ac_beg=$ac_end - ac_end=`expr $ac_end + $ac_max_sed_cmds` + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" || { + # Find who we are. Look in the path if we contain no path at all + # relative or not. + case $0 in + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done + + ;; + esac + # We did not find ourselves, most probably we were run as `sh COMMAND' + # in which case we are not to be found in the path. + if test "x$as_myself" = x; then + as_myself=$0 + fi + if test ! -f "$as_myself"; then + { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5 +echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;} + { (exit 1); exit 1; }; } fi + case $CONFIG_SHELL in + '') + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for as_base in sh bash ksh sh5; do + case $as_dir in + /*) + if ("$as_dir/$as_base" -c ' + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then + $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } + $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } + CONFIG_SHELL=$as_dir/$as_base + export CONFIG_SHELL + exec "$CONFIG_SHELL" "$0" ${1+"$@"} + fi;; + esac + done done -if test -z "$ac_sed_cmds"; then - ac_sed_cmds=cat +;; + esac + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a + # line-number line before each line; the second 'sed' does the real + # work. The second script uses 'N' to pair each line-number line + # with the numbered line, and appends trailing '-' during + # substitution so that $LINENO is not a special case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the + # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) + sed '=' <$as_myself | + sed ' + N + s,$,-, + : loop + s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, + t loop + s,-$,, + s,^['$as_cr_digits']*\n,, + ' >$as_me.lineno && + chmod +x $as_me.lineno || + { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5 +echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;} + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensible to this). + . ./$as_me.lineno + # Exit status is that of the last command. + exit +} + + +case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in + *c*,-n*) ECHO_N= ECHO_C=' +' ECHO_T=' ' ;; + *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; + *) ECHO_N= ECHO_C='\c' ECHO_T= ;; +esac + +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +rm -f conf$$ conf$$.exe conf$$.file +echo >conf$$.file +if ln -s conf$$.file conf$$ 2>/dev/null; then + # We could just check for DJGPP; but this test a) works b) is more generic + # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). + if test -f conf$$.exe; then + # Don't use ln at all; we don't have any links + as_ln_s='cp -p' + else + as_ln_s='ln -s' + fi +elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln +else + as_ln_s='cp -p' fi -EOF +rm -f conf$$ conf$$.exe conf$$.file -cat >> $CONFIG_STATUS <<EOF +if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +as_executable_p="test -f" + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +# IFS +# We need space, tab and new line, in precisely that order. +as_nl=' +' +IFS=" $as_nl" + +# CDPATH. +$as_unset CDPATH + +exec 6>&1 + +# Open the log real soon, to keep \$[0] and so on meaningful, and to +# report actual input values of CONFIG_FILES etc. instead of their +# values after options handling. Logging --version etc. is OK. +exec 5>>config.log +{ + echo + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +## Running $as_me. ## +_ASBOX +} >&5 +cat >&5 <<_CSEOF + +This file was extended by $as_me, which was +generated by GNU Autoconf 2.59. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS + CONFIG_LINKS = $CONFIG_LINKS + CONFIG_COMMANDS = $CONFIG_COMMANDS + $ $0 $@ + +_CSEOF +echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5 +echo >&5 +_ACEOF + +# Files that config.status was made for. +if test -n "$ac_config_files"; then + echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS +fi + +if test -n "$ac_config_headers"; then + echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS +fi + +if test -n "$ac_config_links"; then + echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS +fi + +if test -n "$ac_config_commands"; then + echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS +fi + +cat >>$CONFIG_STATUS <<\_ACEOF + +ac_cs_usage="\ +\`$as_me' instantiates files from templates according to the +current configuration. + +Usage: $0 [OPTIONS] [FILE]... + + -h, --help print this help, then exit + -V, --version print version number, then exit + -q, --quiet do not print progress messages + -d, --debug don't remove temporary files + --recheck update $as_me by reconfiguring in the same conditions + --file=FILE[:TEMPLATE] + instantiate the configuration file FILE + +Configuration files: +$config_files + +Report bugs to <bug-autoconf@gnu.org>." +_ACEOF + +cat >>$CONFIG_STATUS <<_ACEOF +ac_cs_version="\\ +config.status +configured by $0, generated by GNU Autoconf 2.59, + with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" + +Copyright (C) 2003 Free Software Foundation, Inc. +This config.status script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it." +srcdir=$srcdir +INSTALL="$INSTALL" +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF +# If no file are specified by the user, then we need to provide default +# value. By we need to know if files were specified by the user. +ac_need_defaults=: +while test $# != 0 +do + case $1 in + --*=*) + ac_option=`expr "x$1" : 'x\([^=]*\)='` + ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` + ac_shift=: + ;; + -*) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift + ;; + *) # This is not an option, so the user has probably given explicit + # arguments. + ac_option=$1 + ac_need_defaults=false;; + esac + + case $ac_option in + # Handling of the options. +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; + --version | --vers* | -V ) + echo "$ac_cs_version"; exit 0 ;; + --he | --h) + # Conflict between --help and --header + { { echo "$as_me:$LINENO: error: ambiguous option: $1 +Try \`$0 --help' for more information." >&5 +echo "$as_me: error: ambiguous option: $1 +Try \`$0 --help' for more information." >&2;} + { (exit 1); exit 1; }; };; + --help | --hel | -h ) + echo "$ac_cs_usage"; exit 0 ;; + --debug | --d* | -d ) + debug=: ;; + --file | --fil | --fi | --f ) + $ac_shift + CONFIG_FILES="$CONFIG_FILES $ac_optarg" + ac_need_defaults=false;; + --header | --heade | --head | --hea ) + $ac_shift + CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" + ac_need_defaults=false;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; + + # This is an error. + -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 +Try \`$0 --help' for more information." >&5 +echo "$as_me: error: unrecognized option: $1 +Try \`$0 --help' for more information." >&2;} + { (exit 1); exit 1; }; } ;; + + *) ac_config_targets="$ac_config_targets $1" ;; -CONFIG_FILES=\${CONFIG_FILES-"Makefile"} -EOF -cat >> $CONFIG_STATUS <<\EOF -for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then - # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". - case "$ac_file" in - *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` - ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; - *) ac_file_in="${ac_file}.in" ;; esac + shift +done - # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories. +ac_configure_extra_args= - # Remove last slash and all that follows it. Not all systems have dirname. - ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` - if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then - # The file is in a subdirectory. - test ! -d "$ac_dir" && mkdir "$ac_dir" - ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`" - # A "../" for each directory in $ac_dir_suffix. - ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'` - else - ac_dir_suffix= ac_dots= - fi - - case "$ac_given_srcdir" in - .) srcdir=. - if test -z "$ac_dots"; then top_srcdir=. - else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;; - /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;; - *) # Relative path. - srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix" - top_srcdir="$ac_dots$ac_given_srcdir" ;; +if $ac_cs_silent; then + exec 6>/dev/null + ac_configure_extra_args="$ac_configure_extra_args --silent" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF +if \$ac_cs_recheck; then + echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 + exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion +fi + +_ACEOF + + + + + +cat >>$CONFIG_STATUS <<\_ACEOF +for ac_config_target in $ac_config_targets +do + case "$ac_config_target" in + # Handling of arguments. + "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;; + *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 +echo "$as_me: error: invalid argument: $ac_config_target" >&2;} + { (exit 1); exit 1; }; };; esac +done + +# If the user did not use the arguments to specify the items to instantiate, +# then the envvar interface is used. Set only those that are not. +# We use the long form for the default assignment because of an extremely +# bizarre bug on SunOS 4.1.3. +if $ac_need_defaults; then + test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files +fi + +# Have a temporary directory for convenience. Make it in the build tree +# simply because there is no reason to put it here, and in addition, +# creating and moving files from /tmp can sometimes cause problems. +# Create a temporary directory, and hook for its removal unless debugging. +$debug || +{ + trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 + trap '{ (exit 1); exit 1; }' 1 2 13 15 +} + +# Create a (secure) tmp directory for tmp files. + +{ + tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` && + test -n "$tmp" && test -d "$tmp" +} || +{ + tmp=./confstat$$-$RANDOM + (umask 077 && mkdir $tmp) +} || +{ + echo "$me: cannot create a temporary directory in ." >&2 + { (exit 1); exit 1; } +} + +_ACEOF + +cat >>$CONFIG_STATUS <<_ACEOF + +# +# CONFIG_FILES section. +# + +# No need to generate the scripts if there are no CONFIG_FILES. +# This happens for instance when ./config.status config.h +if test -n "\$CONFIG_FILES"; then + # Protect against being on the right side of a sed subst in config.status. + sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g; + s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF +s,@SHELL@,$SHELL,;t t +s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t +s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t +s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t +s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t +s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t +s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t +s,@exec_prefix@,$exec_prefix,;t t +s,@prefix@,$prefix,;t t +s,@program_transform_name@,$program_transform_name,;t t +s,@bindir@,$bindir,;t t +s,@sbindir@,$sbindir,;t t +s,@libexecdir@,$libexecdir,;t t +s,@datadir@,$datadir,;t t +s,@sysconfdir@,$sysconfdir,;t t +s,@sharedstatedir@,$sharedstatedir,;t t +s,@localstatedir@,$localstatedir,;t t +s,@libdir@,$libdir,;t t +s,@includedir@,$includedir,;t t +s,@oldincludedir@,$oldincludedir,;t t +s,@infodir@,$infodir,;t t +s,@mandir@,$mandir,;t t +s,@build_alias@,$build_alias,;t t +s,@host_alias@,$host_alias,;t t +s,@target_alias@,$target_alias,;t t +s,@DEFS@,$DEFS,;t t +s,@ECHO_C@,$ECHO_C,;t t +s,@ECHO_N@,$ECHO_N,;t t +s,@ECHO_T@,$ECHO_T,;t t +s,@LIBS@,$LIBS,;t t +s,@CC@,$CC,;t t +s,@CFLAGS@,$CFLAGS,;t t +s,@LDFLAGS@,$LDFLAGS,;t t +s,@CPPFLAGS@,$CPPFLAGS,;t t +s,@ac_ct_CC@,$ac_ct_CC,;t t +s,@EXEEXT@,$EXEEXT,;t t +s,@OBJEXT@,$OBJEXT,;t t +s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t +s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t +s,@INSTALL_DATA@,$INSTALL_DATA,;t t +s,@LN_S@,$LN_S,;t t +s,@CPP@,$CPP,;t t +s,@EGREP@,$EGREP,;t t +s,@SRCS@,$SRCS,;t t +s,@LIBOBJS@,$LIBOBJS,;t t +s,@LTLIBOBJS@,$LTLIBOBJS,;t t +CEOF + +_ACEOF + + cat >>$CONFIG_STATUS <<\_ACEOF + # Split the substitutions into bite-sized pieces for seds with + # small command number limits, like on Digital OSF/1 and HP-UX. + ac_max_sed_lines=48 + ac_sed_frag=1 # Number of current file. + ac_beg=1 # First line for current file. + ac_end=$ac_max_sed_lines # Line after last line for current file. + ac_more_lines=: + ac_sed_cmds= + while $ac_more_lines; do + if test $ac_beg -gt 1; then + sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag + else + sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag + fi + if test ! -s $tmp/subs.frag; then + ac_more_lines=false + else + # The purpose of the label and of the branching condition is to + # speed up the sed processing (if there are no `@' at all, there + # is no need to browse any of the substitutions). + # These are the two extra sed commands mentioned above. + (echo ':t + /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed + if test -z "$ac_sed_cmds"; then + ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" + else + ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" + fi + ac_sed_frag=`expr $ac_sed_frag + 1` + ac_beg=$ac_end + ac_end=`expr $ac_end + $ac_max_sed_lines` + fi + done + if test -z "$ac_sed_cmds"; then + ac_sed_cmds=cat + fi +fi # test -n "$CONFIG_FILES" - case "$ac_given_INSTALL" in - [/$]*) INSTALL="$ac_given_INSTALL" ;; - *) INSTALL="$ac_dots$ac_given_INSTALL" ;; +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF +for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue + # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". + case $ac_file in + - | *:- | *:-:* ) # input from stdin + cat >$tmp/stdin + ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` + ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; + *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` + ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; + * ) ac_file_in=$ac_file.in ;; esac - echo creating "$ac_file" - rm -f "$ac_file" - configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure." - case "$ac_file" in - *Makefile*) ac_comsub="1i\\ -# $configure_input" ;; - *) ac_comsub= ;; + # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories. + ac_dir=`(dirname "$ac_file") 2>/dev/null || +$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + { if $as_mkdir_p; then + mkdir -p "$ac_dir" + else + as_dir="$ac_dir" + as_dirs= + while test ! -d "$as_dir"; do + as_dirs="$as_dir $as_dirs" + as_dir=`(dirname "$as_dir") 2>/dev/null || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + done + test ! -n "$as_dirs" || mkdir $as_dirs + fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 +echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} + { (exit 1); exit 1; }; }; } + + ac_builddir=. + +if test "$ac_dir" != .; then + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` + # A "../" for each directory in $ac_dir_suffix. + ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` +else + ac_dir_suffix= ac_top_builddir= +fi + +case $srcdir in + .) # No --srcdir option. We are building in place. + ac_srcdir=. + if test -z "$ac_top_builddir"; then + ac_top_srcdir=. + else + ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` + fi ;; + [\\/]* | ?:[\\/]* ) # Absolute path. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir ;; + *) # Relative path. + ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_builddir$srcdir ;; +esac + +# Do not use `cd foo && pwd` to compute absolute paths, because +# the directories may not exist. +case `pwd` in +.) ac_abs_builddir="$ac_dir";; +*) + case "$ac_dir" in + .) ac_abs_builddir=`pwd`;; + [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; + *) ac_abs_builddir=`pwd`/"$ac_dir";; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_top_builddir=${ac_top_builddir}.;; +*) + case ${ac_top_builddir}. in + .) ac_abs_top_builddir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; + *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_srcdir=$ac_srcdir;; +*) + case $ac_srcdir in + .) ac_abs_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; + *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_top_srcdir=$ac_top_srcdir;; +*) + case $ac_top_srcdir in + .) ac_abs_top_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; + *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; + esac;; +esac + + + case $INSTALL in + [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; + *) ac_INSTALL=$ac_top_builddir$INSTALL ;; esac - ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` - sed -e "$ac_comsub -s%@configure_input@%$configure_input%g -s%@srcdir@%$srcdir%g -s%@top_srcdir@%$top_srcdir%g -s%@INSTALL@%$INSTALL%g -" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file -fi; done -rm -f conftest.s* + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + if test x"$ac_file" = x-; then + configure_input= + else + configure_input="$ac_file. " + fi + configure_input=$configure_input"Generated from `echo $ac_file_in | + sed 's,.*/,,'` by configure." + + # First look for the input files in the build tree, otherwise in the + # src tree. + ac_file_inputs=`IFS=: + for f in $ac_file_in; do + case $f in + -) echo $tmp/stdin ;; + [\\/$]*) + # Absolute (can't be DOS-style, as IFS=:) + test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +echo "$as_me: error: cannot find input file: $f" >&2;} + { (exit 1); exit 1; }; } + echo "$f";; + *) # Relative + if test -f "$f"; then + # Build tree + echo "$f" + elif test -f "$srcdir/$f"; then + # Source tree + echo "$srcdir/$f" + else + # /dev/null tree + { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +echo "$as_me: error: cannot find input file: $f" >&2;} + { (exit 1); exit 1; }; } + fi;; + esac + done` || { (exit 1); exit 1; } + + if test x"$ac_file" != x-; then + { echo "$as_me:$LINENO: creating $ac_file" >&5 +echo "$as_me: creating $ac_file" >&6;} + rm -f "$ac_file" + fi +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF + sed "$ac_vpsub +$extrasub +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF +:t +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b +s,@configure_input@,$configure_input,;t t +s,@srcdir@,$ac_srcdir,;t t +s,@abs_srcdir@,$ac_abs_srcdir,;t t +s,@top_srcdir@,$ac_top_srcdir,;t t +s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t +s,@builddir@,$ac_builddir,;t t +s,@abs_builddir@,$ac_abs_builddir,;t t +s,@top_builddir@,$ac_top_builddir,;t t +s,@abs_top_builddir@,$ac_abs_top_builddir,;t t +s,@INSTALL@,$ac_INSTALL,;t t +" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out + rm -f $tmp/stdin + if test x"$ac_file" != x-; then + mv $tmp/out $ac_file + else + cat $tmp/out + rm -f $tmp/out + fi -EOF -cat >> $CONFIG_STATUS <<EOF +done +_ACEOF -EOF -cat >> $CONFIG_STATUS <<\EOF +cat >>$CONFIG_STATUS <<\_ACEOF -exit 0 -EOF +{ (exit 0); exit 0; } +_ACEOF chmod +x $CONFIG_STATUS -rm -fr confdefs* $ac_clean_files -test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1 +ac_clean_files=$ac_clean_files_save + + +# configure is writing to config.log, and then calls config.status. +# config.status does its own redirection, appending to config.log. +# Unfortunately, on DOS this fails, as config.log is still kept open +# by configure, so config.status won't be able to write to it; its +# output is simply discarded. So we exec the FD to /dev/null, +# effectively closing config.log, so it can be properly (re)opened and +# appended to by config.status. When coming back to configure, we +# need to make the FD available again. +if test "$no_create" != yes; then + ac_cs_success=: + ac_config_status_args= + test "$silent" = yes && + ac_config_status_args="$ac_config_status_args --quiet" + exec 5>/dev/null + $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false + exec 5>>config.log + # Use ||, not &&, to avoid exiting from the if with $? = 1, which + # would make configure fail if this is the last instruction. + $ac_cs_success || { (exit 1); exit 1; } +fi