VDR Plugin 'osdteletext' Revision History
-----------------------------------------
2010-11-06: version 0.9.0
- Updated Italian translation provided by Diego Pierotto (Closes #151)
- Fix valid page number check in TeletextBrowser::ExecuteAction (Closes #154)
- Fixed possible segfault (Closes #179) - (Thx to Manuel Reimer)
- Added setup option to disable main menu entry (Closes #149)
(Thx to Manuel Reimer!)
- Added command line option to enable storing TopText pages, which is
now disabled by default (References #177) (Thx to Andreas Brachold!)
- Makefile adjustments for VDR 1.7.13.
- Don't care if the current channel really changed, if we get a channel switch
on the primary device (Thx to Sören Moch)
2009-06-02: version 0.8.3
- Updated Ukrainian translation provided by Yarema P. aka Knedlyk (Closes #133)
2009-05-25: version 0.8.2
- More refactoring of the TxtStatus class (Thx to Sören Moch!)
- Install plug-in to lib dir with --remove-destination as suggested
by Christian Wieninger (Closes #57)
- If background is configured to completely black or transparent,
toggle between black and transparent only.
- Updated Italian translation provided by Diego Pierotto (Closes #60)
- Fixed problems with VDR >= 1.7.3 (not all teletext pages accessible,
4 GByte VTX files)
- Removed unnecessary DVBDIR from Makefile
2009-01-10: version 0.8.1
- Small bugfix in channel switching code
2009-01-10: version 0.8.0
- Added Portuguese translation provided by Chris Silva
- Updated Italian translation by Davide Cavalca
- Removed the "OSD" from the main menu entry as suggested by Davide Cavalca
- Added Ukrainian translation provided by Yarema P. aka Knedlyk
- Removed obsolete options -R and -r
- Remove remnants of VDR < 1.6 support
- Updated Russian translation provided by Oleg Roitburd (Closes #46)
- Improved error handling
- Background toggling now allows to switch between black, the configured
background transparency and full transparency as suggested by
Walter K. (Closes #41)
- Removed the OSDTELETEXT_REINSERTION_PATCH (dead code)
- Removed timingdebug code
- Merged class ChannelStatus into cTxtStatus and changed the code that
detects, if the current live channel has been changed and the
OsdTeletext receiver needs to switch to the new channel as well
- Updated French translation provided by Nival Michaël (Closes #56)
2008-12-19: version 0.7.0
- switched completely to VDR 1.6's I18N system and removed the old crap - no
more support for older VDR versions! (thx to Rolf Ahrenberg)
- proper translation of the key bindings (thx to Rolf Ahrenberg)
- Partially updated Italian translation by Davide Cavalca <davide125@tiscali.it>
2008-12-02: version 0.6.0
- Moved installation of README and manpage from all to install target
- Updated code for VDR 1.6.0
- Changed default location of vtx cache to /var/cache/vdr/vtx
- Fixed problems with switching channels on FF+Budget systems
See: http://www.vdr-portal.de/board/thread.php?postid=728192#post728192
2005-08-16: version 0.5.1
- show page if it was initially not found
but is received later
(suggested by Luca Olivetti)
- added timeout for user inactivity after
which the plugin is closed. Without timeout the plugin would
prevent VDR's auto-shutdown mechanism if it remains open.
The value is the same as VDR's min user inactivity
setup option.
(suggested by Peter Bieringer)
- fixed gcc4 warnings
(thanks to Ville Skyttä)
- updated Finnish translation
(thanks to Rolf Ahrenberg)
- added command line parameter documentation
to READMEs
- added /var/cache/vdr/osdteletext to the list of recommended
cache directories
(suggested by Ville Skyttä)
2005-04-21: version 0.5
Udo Richter:
- font subsystem now supports Teletext level 1.
Fonts are provided for English, German, French,
Italian, Spanish, Portuguese, Swedish and Finnish.
The correct font is chosen automatically.
- support for "boxed mode" (newstickers, subtitles):
in 4Bpp mode the area not covered by the box
will be completely transparent
- OSD can now be aligned on screen:
- in horizontal alignment mode, 0 means on the left,
50 in the center and 100 on the right
- in vertical alignment mode, 0 means at the top,
50 in the center and 100 at the bottom
- default is central alignment
- changed palette system, no longer depending on
order of indexing
- fixed compilation failure with gcc 2.95
- changed OSD minimum size from 480x324 to 320x250
- some bugfixes and comments in txtrecv.c
Marcel Wiesweg:
- avoid crash and improve behavior when an
invalid channel number is entered
2005-03-30: version 0.5-pre1
Udo Richter:
- extensive rewrite of display code
- removed display.*, txtbitmap.*, colormapping.h
- added txtrender.*, displaybase.*, display.*
- menu.c adapted to new display engine
- speed improvements by incremental drawing
- strict adherence to standard
2005-03-21: version 0.4.9-inofficial
- rewrite of scaling and drawing code, better scaling
algorithm, removed inefficient double painting.
Increases speed by a factor of 4. (Udo Richter)
- minor fixes for pagenumber, channel number and clock
fields to minimize overdrawing (Rolf Ahrenberg)
- fix for graphical errors if normal characters are
introduced after double high ones (Rolf Ahrenberg)
- fix in receiving code to make osdteletext work
with some Swedish channels (thanks to Magnus Andersson)
- pseudo target in Makefile allows a simple "make".
Previously, this would fail and you needed "make all"
2005-03-03: version 0.4.2
- fixes for double-high characters, scaling and localization
(thanks to Rolf Ahrenberg for his patch edition)
- adapted to VDR API >= 1.3.18, reentrancy fixes
- added Spanish and Catalan translation
(thanks to Luca Olivetti)
- create stored files with 644 permissions
(suggested by Andreas Brachold)
2004-09-21: version 0.4.1
- fixed problem with undefined file permissions
of created files (thanks to whoever created the patch)
- fixed hexadecimal/decimal misinterpretation for "Jump to"
key bindings (thanks to Peter Bieringer for pointing this out)
- cosmetic change: key Left when entering channel number
now resets the cursor by one position, other keys stop
entering of page number
2004-06-18: version 0.4
- ported to VDR 1.3/1.4 series (>=1.3.8 now required)
This mostly involved changes in the OSD graphics code,
- now supports OSDs with color depth of 3
(thanks to Sascha Volkenandt)
- rewrote the storage system:
- cache directory is now configurable (option -d)
Default value is still /vtx to allow seamless migration,
but /tmp/vtx is recommended (conforms to LSB etc.)
- changed the default file format: Now more than one
page is stored in one file. On filesystems that depend
on a blocksize the increases storage efficiency.
For tmpfs the improvement factor is approx. 4.
- The old system is still available via a
command line option (though it now uses a slightly
different naming)
- when no more space is available on disk
or a specified number of harddisk space is exceeded
(option -n) the folder least recently modified
will be deleted.
On exit, all files will be deleted, i.e.
(!) on exit, all files with suffix .vtx
below the storage directory will be deleted
- the option -r is now obsolete (will be ignored)
option -R/--no-receive is deprecated
- code cleanups, removed broken or unused code
- fixed quite a few bugs
- Added Russian translation (thanks to Vyacheslav Dikonov)
2003-12-2: version 0.3.2
- receiver now uses a ring buffer and a thread to reduce
time spent in Receive() function, thus delaying VDR's
receiver thread (several people reported problems
with bitstreamout - thanks to Christian Jacobsen
and Dr. Werner Fink)
- fixed and improved the newly introduced receiver thread
(thanks to Dr. Werner Fink)
- fixed a bug that if there is a double high title on a page,
the last line on that page will be missing
(fixed by Rolf Ahrenberg)
- fixed Finnish translation (thanks to Rolf Ahrenberg)
- added Italian translation (thanks to "kikko77")
- fixed bug that you could not enter 0 when switching
channel (thanks to Dietmar Hilbrich)
2003-04-28: version 0.3.1
- added support for DXR3 systems. Patches contributed by Kai Moeller
and Sascha Volkenandt, thanks to them.
- the "0" if pressed as first digit now switches between current
and last page (as VDR does it with channels)
- fixed autosuspend thread
2003-04-03: version 0.3
- fixed two serious memory leaks, thanks to Martin Pley
- added feature to automatically update the page if it changed.
- moved color definitions to colormapping.h
- made width and height configurable, independent from, but with the same
mechanism as VDR
- made setup menu items dynamic, i.e. the "Page Number" entries are hidden
when "Jump to..." is not selected
- Experimental: added option to suspend the receiving automatically
for 5min after 30s. This may enable you to use your TV set's
teletext decoder if you like to. (patch to VDR needed)
- Experimental: added an action to immediately suspend receiving,
respectively reenable it
- added an action to switch the background color between the value
you configured in the setup and black
- improved color handling when foreground and background
color are the same, thanks to Martin Pley
- fixed small bug in ChangePageRelative, thanks to Martin Pley
- improvements in page switching, thanks to Martin Pley
- rewrote parts of the README
- added a German README.DE
- several fixes and code clean-ups
2003-02-26: version 0.2.1
- fixed two compiling problems with gcc versions other than 3.2
(asprintf, <map>)
- included Finnish translations, thanks to Lauri Tischler
- improved Makefile, now uses install instead of mkdir/cp
2003-02-15: version 0.2
- Copied code to receive and save teletext data from original teletext plugin.
(appreciating Peter Seyringer's great work)
- added command line option to enable the receiving code
- added setup options to make key bindings fully configurable.
For each key you can choose between the three actions "Zoom", "Half page" or
"Switch channel" or use it to jump to a page
- added setup option to make background transparency configurable
(0...255, VDR's default value being 127)
- included Emil Naepflein's patch to improve changing pages relatively
- added feature to view saved pages of other channels than the current
("Switch Channel"). Last pages are remembered over channel switching.
- fixed bug when the upper half of a page was not automatically shown
when using the number keys
- page and channel numbers now persist when returning to VDR
- added clock which can regularly be updated.
(the clock shows the system time, which may definitely be different
from the time broadcast via teletext)
- added setup option to enable clock
- now copies README to ../../man, as Reinhard Walter Buchner suggested
2003-02-05: Version 0.1
- Initial revision.
