@Section
   @Title { Glossaries }
   @Tag { glossaries }
@Begin
@PP
A glossary
@FootNote {
The features described in this section are closely based on a
design by Thorsten Seitz. }
is a section at the end of a document containing terms
and their definitions, with a reference back to the page of the
document where each term is first used.  It's similar to an index,
except that there are fewer entries and they are longer and more
spaced out -- for reading rather than just reference.
@PP
In order to get a glossary, you have to be using either the @Code book
or @Code report setup file, and you have to make your own copy of
the setup file (as described in Section {@NumberOf setup}) and change
the @Code "@MakeGlossary" option within it to {@Code "Yes"}.  Lout
does not insert a glossary automatically.  The glossary will appear
at the end of the document, immediately before any index.
@PP
To make an entry in the glossary, place something like this in
your main text at the point you are defining the term:
@ID @Code @Verbatim {
Object @Glossary {
Part of a document occupying a rectangular area;
may be a simple word, or a collection of smaller
objects composed in arbitrary ways.
}
}
The object to the left of @Code "@Glossary" is the term being defined,
and the object to the right is its definition.  Nothing will appear
in the main text where you put this, but the term will appear in the
glossary, accompanied by its definition and the page number of this spot.
@PP
The term should be just a word or a short sequence of words.  The
definition may be as long and complex as you wish, containing
paragraphs, displays, and so on.
@PP
The glossary items will appear sorted alphabetically.  You can use
the @Code "sortkey" option of @Code "@Glossary" to provide a separate
sorting key:
@ID @Code @Verbatim {
{@Char florin} @Glossary sortkey { florin } {
The florin character.
}
}
This entry will appear in the list where things beginning with
@Code f do, not where the @Code florin character code would
place it.  If you do this, since the term being defined is no
longer used as a sort key it is free to be an arbitrary object, not
restricted to be a word or a short sequence of words.
@PP
Creating a glossary entry does not automatically create an index
entry (Section {@NumberOf indexes}).  If you want an index entry
for your glossary term as well (as you probably will) you need to
make that separately, and you will need to use a different tag
from the tag used by the glossary entry (which is either the term
being defined, or @Code sortkey if given).  To make an index entry
that points into the actual glossary, which you also probably need,
just place your index entry somewhere inside the definition.
@PP
In your main text you may want to indicate to the reader that
some word or phrase appears in the glossary.  For that there
is the @Code "@InGlossary" symbol:
@ID @Code "... where you can put one @InGlossary { object } ..."
The thing between braces does not actually have to be in the
glossary; @Code "@InGlossary" usually just changes the font,
by default to small capitals, and it does not change anything
unless @Code "@MakeGlossary" is {@Code Yes}.
@PP
The remainder of this section explains how to change the appearance
of the printed glossary, by setting options in the setup file.  For
a general introduction to setup files and their options, see
Section {@NumberOf setup}; here we just explain how the particular
options relating to glossaries work.
@PP
Most of the glossary options appear within the @Code "@DocumentSetup"
@Code "@Use" clause.  Here they are (except {@Code "@GlossaryFormat"}
which we'll discuss in a moment) with their default values:
@ID @Code @OneRow @Verbatim {
@MakeGlossary { No }
@GlossaryText { @Null }
@GlossaryFont {}
@GlossaryBreak {}
@GlossaryGap { @DisplayGap }
@GlossaryColumnNumber{ 2 }
@GlossaryColumnGap { 1.00c @OrIfPlain 6s }
@InGlossaryFont { smallcaps }
@InGlossaryFormat { @Body }
}
First comes {@Code "@MakeGlossary"}, which determines whether to
make a glossary, as we know.
@PP
{@Code "@GlossaryText"} is some arbitrary text that will be
placed before the first entry of the glossary.  You can also
give this option to the @Code "@Book" and @Code "@Report" symbols,
and that would probably be the best place since such text is
usually part of the document content, not the setup.
@PP
@Code "@GlossaryFont" and @Code "@GlossaryBreak" are font and
break style options which are applied to each glossary entry.  The
default values don't change the font or break style at all.
@PP
@Code "@GlossaryGap" determines the vertical separation between
one glossary entry and the next.  You can give any length
(Section {@NumberOf objects}) here; the default is the gap used
around displays.
@PP
@Code "@GlossaryColumnNumber" and @Code "@GlossaryColumnGap"
determine the number of columns on glossary pages, and the
width of the gap between them.  By default you get two columns
per page and a one centimetre gap (or six spaces in plain text
output), as for indexes (Section {@NumberOf indexes}).
@PP
@Code "@InGlossaryFont" and @Code "@InGlossaryFormat" determine
the appearance of the result of the @Code "@InGlossary" symbol.  The
first changes the font; the second allows for more radical
formatting.  Within it, {@Code "@Body"} stands for the object
following the {@Code "@InGlossary"} object, and you can do
anything you like with it here.  For example,
@ID @Code "@InGlossaryFormat { @CurveBox @Body }"
would cause @Code "@InGlossary" to enclose the following
object in a curvebox (which would look horrible, of course).
The default values change to small capitals but nothing more.
@PP
{@Code "@GlossaryFormat"}, which we omitted earlier because
it is more complex, determines the format of each glossary
entry.  Here it is with its default value:
@ID @OneRow @Code @Verbatim {
@GlossaryFormat {
    +3p @Font @S @Name @Right @I { @Word&&page @PageNum }
    @DP
    @RawIndentedDisplay @Body
}
}
We'll go through this bit by bit.
@PP
First, the value of the option is longer than usual so we have
spread it over three lines.  There is nothing significant in
this; end of line is the same as a space to Lout, and we've
used three lines just to show the value clearly.
@PP
Within @Code "@GlossaryFormat" three symbols are made
available specially:
@QD @OneRow @Tbl
    aformat { @Cell @Code A | @Cell B }
{
@Rowa
    A { "@Name" }
    B { Will be replaced by the term being defined }
@Rowa
    A { "@PageNum" }
    B { Will be replaced by the number of the page of the
spot where the @Code "@Glossary" symbol is placed }
@Rowa
    A { "@Body" }
    B { Will be replaced by the definition }
}
Now let's look at what the default format does.  The first bit,
@ID @Code "+3p @Font @S @Name"
produces the term being defined, three points larger than would
have been the case otherwise, and in small capitals.  The
@Code "@Right" symbol causes what follows it to appear at the
far right, so
@ID @Code "@I { @Word&&page @PageNum }"
will appear at the right of the column on the same line as
the term.  The value of {@Code "@Word&&page"} is just
{@Code page} in the current language, and @Code "@PageNum" is a
page number as we know, so this produces something like
@ID @I { page 143 }
at the right.  After that we have {@Code "@DP"} which leaves
a display-sized vertical gap, then the body appears in an
indented display, made Raw so that there is no trailing
vertical space.
@PP
You can change this option to anything you like.  For example,
suppose you prefer bold to small capitals, you want the page number
in parentheses after the term, and you want each entry to be
kept together in one column:
@ID @OneRow @Code @Verbatim {
@GlossaryFormat {
    @OneRow {
        @B @Name (@I { @Word&&page @PageNum })
        @DP
        @RawIndentedDisplay @Body
    }
}
}
And so on.
@PP
There are a few more setup file options for glossaries, to be found
in the {@Code "@BookSetup"} or {@Code "@ReportSetup"} @Code "@Use"
clause of the setup file.  Here they are with their default values:
@ID @OneRow @Code @Verbatim {
@GlossaryWord { glossary }
@GlossaryInContents { Yes  }
@GlossaryPrefix {}
}
The first determines the word that will be used as the title of
the glossary.  The default value shown produces {@Code Glossary}
in English and its equivalent in other languages.  You could change
it, for example, to
@ID @Code "@GlossaryWord { List of Definitions }"
@Code "@GlossaryInContents" determines whether the glossary will
be listed in the table of contents if there is one; and
@Code "@GlossaryPrefix" is used by structure page numbers.
@End @Section