[prelude] # This is the default configuration for program client of a manager # (sensors and agents) that use libprelude. # # Entry in this configuration file might be overriden by entry directly # provided by the sensors/agents configuration file. # Try to connect on a Manager listening on 127.0.0.1. # # server-addr = x.x.x.x:port || y.y.y.y && z.z.z.z # # This mean the emission should occur on x.x.x.x:port or, if it fail, # on y.y.y.y and z.z.z.z (if one of the two host in the AND fail, # the emission will be considered as failed involving saving the # message locally). server-addr = 127.0.0.1 # The following settings instruct the operating system when to consider # a connection dead in case sent data is left unacknowledged. # # Theses option are operating system specific, and might not work on # certain platform. In case you modify these settings on an unsupported # system, a warning message will be issued when the agent starts. # # Under Linux, the default system wide configuration is: # tcp-keepalive-time = 7200 # tcp-keepalive-probes = 9 # tcp-keepalive-intvl = 75 # # tcp-keepalive-time represents the number of seconds the connection # needs to be idle before TCP begins sending out keep-alive probes. # # tcp-keepalive-probes represent the number of not acknowledged probes # to send before considering the connection dead. # # tcp-keepalive-intvl represents the interval between subsequent # keepalive probes. # # The average time to notice a dead connection can be calculated using: # tcp-keepalive-time + (tcp-keepalive-probes * tcp-keepalive-intvl) # # Here is an example configuration: # tcp-keepalive-time = 60 # tcp-keepalive-probes = 3 # tcp-keepalive-intvl = 10 # # Using the above settings, a dead connection will be detected within # 90 seconds. # # TLS options (only available with GnuTLS 2.2.0 or higher): # # Sets priorities for the ciphers, key exchange methods, macs and # compression methods. # # "NORMAL" option enables all "secure" ciphersuites. The 256-bit # ciphers are included as a fallback only. The ciphers are sorted by # security margin. # # "SECURE128" flag enables all "secure" ciphersuites with ciphers up to # 128 bits, sorted by security margin. # # "SECURE256" flag enables all "secure" ciphersuites including the 256 # bit ciphers, sorted by security margin. # # "EXPORT" all the ciphersuites are enabled, including the low-security # 40 bit ciphers. # # "NONE" nothing is enabled. This disables even protocols and # compression methods. # # Note that much more settings might be enabled or disabled using this # option: please see gnutls_priority_init(3) for more details. # # The default settings is "NORMAL". # tls-options = NORMAL