model = 2651XM [localhost] [[2651XM]] ram = 256 image = \Program Files\Dynamips\images\c2600-advipservicesk9-mz.124-12.image [[router inside]] # This router will be on the "inside" of the firewall # Connect this router's f0/0 interface to fw1's e1 interface f0/0 = fw1 e1 [[router outside]] # This router will be on the "outside" of the firewall # Connect this router's f0/0 interface to fw1's e1 interface f0/0 = fw1 e0 [[ethsw s1]] 1 = access 1 # Bridge the below interface to allow fw1's e2 interface access to real networks # e.g. for using ASDM from a PC to manage the firewall #2 = access 1 NIO_gen_eth:\Device\NPF_{92583E4F-4732-4591-A41B-C2A395F63F0C} [pemu localhost] [[525]] #for pix 7 & 8 serial = 123456789 #for pix 6 #serial = 123456789 #key = 0xffffffff,0xffffffff,0xffffffff,0xffffffff image = c:\Program Files\Dynamips\images\pix723.bin [[fw fw1]] # Connect the firewall's e2 interface to the virtual switch, which will bridge it # to the real network e2 = s1 1