#ifndef UPNP_TV_DEVICE_H
#define UPNP_TV_DEVICE_H

/**************************************************************************
 *
 * Copyright (c) 2000-2003 Intel Corporation 
 * All rights reserved. 
 *
 * Redistribution and use in source and binary forms, with or without 
 * modification, are permitted provided that the following conditions are met: 
 *
 * - Redistributions of source code must retain the above copyright notice, 
 * this list of conditions and the following disclaimer. 
 * - Redistributions in binary form must reproduce the above copyright notice, 
 * this list of conditions and the following disclaimer in the documentation 
 * and/or other materials provided with the distribution. 
 * - Neither name of Intel Corporation nor the names of its contributors 
 * may be used to endorse or promote products derived from this software 
 * without specific prior written permission.
 * 
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL INTEL OR 
 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 
 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, 
 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR 
 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY 
 * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 **************************************************************************/

/*!
 * \addtogroup UpnpSamples
 *
 * @{
 *
 * \name Device Sample API
 *
 * @{
 *
 * \file
 */

#include <stdio.h>
#include <signal.h>

#ifdef __cplusplus
extern "C" {
#endif

#include "sample_util.h"

#include "ithread.h"
#include "upnp.h"

#include <stdlib.h>
#include <string.h>

/*! Color constants */
#define MAX_COLOR 10
#define MIN_COLOR 1

/*! Brightness constants */
#define MAX_BRIGHTNESS 10
#define MIN_BRIGHTNESS 1

/*! Power constants */
#define POWER_ON 1
#define POWER_OFF 0

/*! Tint constants */
#define MAX_TINT 10
#define MIN_TINT 1

/*! Volume constants */
#define MAX_VOLUME 10
#define MIN_VOLUME 1

/*! Contrast constants */
#define MAX_CONTRAST 10
#define MIN_CONTRAST 1

/*! Channel constants */
#define MAX_CHANNEL 100
#define MIN_CHANNEL 1

/*! Number of services. */
#define TV_SERVICE_SERVCOUNT  2

/*! Index of control service */
#define TV_SERVICE_CONTROL    0

/*! Index of picture service */
#define TV_SERVICE_PICTURE    1

/*! Number of control variables */
#define TV_CONTROL_VARCOUNT   3

/*! Index of power variable */
#define TV_CONTROL_POWER      0

/*! Index of channel variable */
#define TV_CONTROL_CHANNEL    1

/*! Index of volume variable */
#define TV_CONTROL_VOLUME     2

/*! Number of picture variables */
#define TV_PICTURE_VARCOUNT   4

/*! Index of color variable */
#define TV_PICTURE_COLOR      0

/*! Index of tint variable */
#define TV_PICTURE_TINT       1

/*! Index of contrast variable */
#define TV_PICTURE_CONTRAST   2

/*! Index of brightness variable */
#define TV_PICTURE_BRIGHTNESS 3

/*! Max value length */
#define TV_MAX_VAL_LEN 5

/*! Max actions */
#define TV_MAXACTIONS 12

/*! This should be the maximum VARCOUNT from above */
#define TV_MAXVARS TV_PICTURE_VARCOUNT

/*!
 * \brief Prototype for all actions. For each action that a service 
 * implements, there is a corresponding function with this prototype.
 *
 * Pointers to these functions, along with action names, are stored
 * in the service table. When an action request comes in the action
 * name is matched, and the appropriate function is called.
 * Each function returns UPNP_E_SUCCESS, on success, and a nonzero 
 * error code on failure.
 */
typedef int (*upnp_action)(
	/*! [in] Document of action request. */
	IXML_Document *request,
	/*! [out] Action result. */
	IXML_Document **out,
	/*! [out] Error string in case action was unsuccessful. */
	const char **errorString);

/*! Structure for storing Tv Service identifiers and state table. */
struct TvService {
	/*! Universally Unique Device Name. */
	char UDN[NAME_SIZE];
	/*! . */
	char ServiceId[NAME_SIZE];
	/*! . */
	char ServiceType[NAME_SIZE];
	/*! . */
	const char *VariableName[TV_MAXVARS]; 
	/*! . */
	char *VariableStrVal[TV_MAXVARS];
	/*! . */
	const char *ActionNames[TV_MAXACTIONS];
	/*! . */
	upnp_action actions[TV_MAXACTIONS];
	/*! . */
	int VariableCount;
};

/*! Array of service structures */
extern struct TvService tv_service_table[];

/*! Device handle returned from sdk */
extern UpnpDevice_Handle device_handle;

/*! Mutex for protecting the global state table data
 * in a multi-threaded, asynchronous environment.
 * All functions should lock this mutex before reading
 * or writing the state table data. */
extern ithread_mutex_t TVDevMutex;

/*!
 * \brief Initializes the action table for the specified service.
 *
 * Note that knowledge of the service description is assumed.
 * Action names are hardcoded.
 */
int SetActionTable(
	/*! [in] one of TV_SERVICE_CONTROL or, TV_SERVICE_PICTURE. */
	int serviceType,
	/*! [in,out] service containing action table to set. */
	struct TvService *out);

/*!
 * \brief Initialize the device state table for this TvDevice, pulling
 * identifier info from the description Document.
 *
 * Note that knowledge of the service description is assumed.
 * State table variables and default values are currently hardcoded in
 * this file rather than being read from service description documents.
 */
int TvDeviceStateTableInit(
	/*! [in] The description document URL. */
	char *DescDocURL);

/*!
 * \brief Called during a subscription request callback.
 *
 * If the subscription request is for this device and either its
 * control service or picture service, then accept it.
 */
int TvDeviceHandleSubscriptionRequest(
	/*! [in] The subscription request event structure. */
	struct Upnp_Subscription_Request *sr_event);

/*!
 * \brief Called during a get variable request callback.
 *
 * If the request is for this device and either its control service or
 * picture service, then respond with the variable value.
 */
int TvDeviceHandleGetVarRequest(
	/*! [in,out] The control get variable request event structure. */
	struct Upnp_State_Var_Request *cgv_event);

/*!
 * \brief Called during an action request callback.
 *
 * If the request is for this device and either its control service
 * or picture service, then perform the action and respond.
 */
int TvDeviceHandleActionRequest(
	/*! [in,out] The control action request event structure. */
	struct Upnp_Action_Request *ca_event);

/*!
 * \brief The callback handler registered with the SDK while registering
 * root device.
 *
 * Dispatches the request to the appropriate procedure
 * based on the value of EventType. The four requests handled by the 
 * device are: 
 *	\li 1) Event Subscription requests.  
 *	\li 2) Get Variable requests. 
 *	\li 3) Action requests.
 */
int TvDeviceCallbackEventHandler(
	/*! [in] The type of callback event. */
	Upnp_EventType,
	/*! [in] Data structure containing event data. */
	void *Event,
	/*! [in] Optional data specified during callback registration. */
	void *Cookie);

/*!
 * \brief Update the TvDevice service state table, and notify all subscribed
 * control points of the updated state.
 *
 * Note that since this function blocks on the mutex TVDevMutex,
 * to avoid a hang this function should not be called within any other
 * function that currently has this mutex locked.
 */
int TvDeviceSetServiceTableVar(
	/*! [in] The service number (TV_SERVICE_CONTROL or TV_SERVICE_PICTURE). */
	unsigned int service,
	/*! [in] The variable number (TV_CONTROL_POWER, TV_CONTROL_CHANNEL,
	 * TV_CONTROL_VOLUME, TV_PICTURE_COLOR, TV_PICTURE_TINT,
	 * TV_PICTURE_CONTRAST, or TV_PICTURE_BRIGHTNESS). */
	int variable,
	/*! [in] The string representation of the new value. */
	char *value);

/* Control Service Actions */

/*!
 * \brief Turn the power on.
 */
int TvDevicePowerOn(
	/*! [in] Document of action request. */
	IXML_Document *in,
	/*! [in] Action result. */
	IXML_Document **out,
	/*! [out] ErrorString in case action was unsuccessful. */
	const char **errorString);

/*!
 * \brief Turn the power off.
 */
int TvDevicePowerOff(
	/*! [in] Document of action request. */
	IXML_Document *in,
	/*! [in] Action result. */
	IXML_Document **out,
	/*! [out] ErrorString in case action was unsuccessful. */
	const char **errorString);

/*!
 * \brief Change the channel, update the TvDevice control service
 * state table, and notify all subscribed control points of the
 * updated state.
 */
int TvDeviceSetChannel(
	/*! [in] Document of action request. */
	IXML_Document *in,
	/*! [in] Action result. */
	IXML_Document **out,
	/*! [out] ErrorString in case action was unsuccessful. */
	const char **errorString);

/*!
 * \brief Increase the channel.  
 */
int TvDeviceIncreaseChannel(
	/*! [in] Document of action request. */
	IXML_Document *in,
	/*! [in] Action result. */
	IXML_Document **out,
	/*! [out] ErrorString in case action was unsuccessful. */
	const char **errorString);

/*!
 * \brief Decrease the channel.  
 */
int TvDeviceDecreaseChannel(
	/*! [in] Document of action request. */
	IXML_Document *in,
	/*! [in] Action result. */
	IXML_Document **out,
	/*! [out] ErrorString in case action was unsuccessful. */
	const char **errorString);

/*!
 * \brief Change the volume, update the TvDevice control service
 *       state table, and notify all subscribed control points of the
 *       updated state.
 */
int TvDeviceSetVolume(
	/*! [in] Document of action request. */
	IXML_Document *in,
	/*! [in] Action result. */
	IXML_Document **out,
	/*! [out] ErrorString in case action was unsuccessful. */
	const char **errorString);

/*!
 * \brief Increase the volume. 
 */
int TvDeviceIncreaseVolume(
	/*! [in] Document of action request. */
	IXML_Document *in,
	/*! [in] Action result. */
	IXML_Document **out,
	/*! [out] ErrorString in case action was unsuccessful. */
	const char **errorString);

/*!
 * \brief Decrease the volume.
 */
int TvDeviceDecreaseVolume(
	/*! [in] Document of action request. */
	IXML_Document *in,
	/*! [in] Action result. */
	IXML_Document **out,
	/*! [out] ErrorString in case action was unsuccessful. */
	const char **errorString);

/*Picture Service Actions */

/*!
 * \brief Change the color, update the TvDevice picture service
 * state table, and notify all subscribed control points of the
 * updated state.
 */
int TvDeviceSetColor(
	/*! [in] Document of action request. */
	IXML_Document *in,
	/*! [in] Action result. */
	IXML_Document **out,
	/*! [out] ErrorString in case action was unsuccessful. */
	const char **errorString);

/*!
 * \brief Increase the color.
 */
int TvDeviceIncreaseColor(
	/*! [in] Document of action request. */
	IXML_Document *in,
	/*! [in] Action result. */
	IXML_Document **out,
	/*! [out] ErrorString in case action was unsuccessful. */
	const char **errorString);

/*!
 * \brief Decrease the color.  
 */
int TvDeviceDecreaseColor(
	/*! [in] Document of action request. */
	IXML_Document *in,
	/*! [in] Action result. */
	IXML_Document **out,
	/*! [out] ErrorString in case action was unsuccessful. */
	const char **errorString);

/*!
 * \brief Change the tint, update the TvDevice picture service
 * state table, and notify all subscribed control points of the
 * updated state.
 */
int TvDeviceSetTint(
	/*! [in] Document of action request. */
	IXML_Document *in,
	/*! [in] Action result. */
	IXML_Document **out,
	/*! [out] ErrorString in case action was unsuccessful. */
	const char **errorString);

/*!
 * \brief Increase tint.
 */
int TvDeviceIncreaseTint(
	/*! [in] Document of action request. */
	IXML_Document *in,
	/*! [in] Action result. */
	IXML_Document **out,
	/*! [out] ErrorString in case action was unsuccessful. */
	const char **errorString);

/*!
 * \brief Decrease tint.
 */
int TvDeviceDecreaseTint(
	/*! [in] Document of action request. */
	IXML_Document *in,
	/*! [in] Action result. */
	IXML_Document **out,
	/*! [out] ErrorString in case action was unsuccessful. */
	const char **errorString);

/*!
 * \brief Change the contrast, update the TvDevice picture service
 * state table, and notify all subscribed control points of the
 * updated state.
 */
int TvDeviceSetContrast(
	/*! [in] Document of action request. */
	IXML_Document *in,
	/*! [in] Action result. */
	IXML_Document **out,
	/*! [out] ErrorString in case action was unsuccessful. */
	const char **errorString);

/*!
 * \brief Increase the contrast.
 */
int TvDeviceIncreaseContrast(
	/*! [in] Document of action request. */
	IXML_Document *in,
	/*! [in] Action result. */
	IXML_Document **out,
	/*! [out] ErrorString in case action was unsuccessful. */
	const char **errorString);

/*!
 * \brief Decrease the contrast.
 */
int TvDeviceDecreaseContrast(
	/*! [in] Document of action request. */
	IXML_Document *in,
	/*! [in] Action result. */
	IXML_Document **out,
	/*! [out] ErrorString in case action was unsuccessful. */
	const char **errorString);

/*!
 * \brief Change the brightness, update the TvDevice picture service
 * state table, and notify all subscribed control points of the
 * updated state.
 */
int TvDeviceSetBrightness(
	/*! [in] Document of action request. */
	IXML_Document *in,
	/*! [in] Action result. */
	IXML_Document **out,
	/*! [out] ErrorString in case action was unsuccessful. */
	const char **errorString);

/*!
 * \brief Increase brightnesss.
 */
int TvDeviceIncreaseBrightness(
	/*! [in] Document of action request. */
	IXML_Document *in,
	/*! [in] Action result. */
	IXML_Document **out,
	/*! [out] ErrorString in case action was unsuccessful. */
	const char **errorString);

/*!
 * \brief Decrease brightnesss.
 */
int TvDeviceDecreaseBrightness(
	/*! [in] Document of action request. */
	IXML_Document *in,
	/*! [in] Action result. */
	IXML_Document **out,
	/*! [out] ErrorString in case action was unsuccessful. */
	const char **errorString);

/*!
 * \brief Initializes the UPnP Sdk, registers the device, and sends out
 * advertisements.
 */
int TvDeviceStart(
	/*! [in] ip address to initialize the sdk (may be NULL)
	 * if null, then the first non null loopback address is used. */
	char *ip_address,
	/*! [in] port number to initialize the sdk (may be 0)
	 * if zero, then a random number is used. */
	unsigned short port,
	/*! [in] name of description document.
	 * may be NULL. Default is tvdevicedesc.xml. */
	const char *desc_doc_name,
	/*! [in] path of web directory.
	 * may be NULL. Default is ./web (for Linux) or ../tvdevice/web. */
	const char *web_dir_path,
	/*! [in] print function to use. */
	print_string pfun,
	/*! [in] Non-zero if called from the combo application. */
	int combo);

/*!
 * \brief Stops the device. Uninitializes the sdk.
 */
int TvDeviceStop(void);

/*!
 * \brief Function that receives commands from the user at the command prompt
 * during the lifetime of the device, and calls the appropriate
 * functions for those commands. Only one command, exit, is currently
 * defined.
 */
void *TvDeviceCommandLoop(void *args);

/*!
 * \brief Main entry point for tv device application.
 *
 * Initializes and registers with the sdk.
 * Initializes the state stables of the service.
 * Starts the command loop.
 *
 * Accepts the following optional arguments:
 *	\li \c -ip ipaddress
 *	\li \c -port port
 *	\li \c -desc desc_doc_name
 *	\li \c -webdir web_dir_path
 *	\li \c -help
 */
int device_main(int argc, char *argv[]);

#ifdef __cplusplus
}
#endif

/*! @} Control Point Sample API */

/*! @} UpnpSamples */

#endif /* UPNP_TV_DEVICE_H */