# Autogenerated configuration file template ################################# # add-superfluous-nsec3-for-old-bind Add superfluous NSEC3 record to positive wildcard response # # add-superfluous-nsec3-for-old-bind=no ################################# # allow-axfr-ips Allow zonetransfers only to these subnets # # allow-axfr-ips=0.0.0.0/0,::/0 ################################# # allow-recursion List of subnets that are allowed to recurse # # allow-recursion=0.0.0.0/0 ################################# # any-to-tcp Answer ANY queries with tc=1, shunting to TCP # # any-to-tcp=no ################################# # cache-ttl Seconds to store packets in the PacketCache # # cache-ttl=20 ################################# # chroot If set, chroot to this directory for more security # # chroot= ################################# # config-dir Location of configuration directory (pdns.conf) # # config-dir=/usr/local/etc ################################# # config-name Name of this virtual configuration - will rename the binary image # # config-name= ################################# # control-console Debugging switch - don't use # # control-console=no ################################# # daemon Operate as a daemon # # daemon=no ################################# # default-ksk-algorithms Default KSK algorithms # # default-ksk-algorithms=rsasha256 ################################# # default-ksk-size Default KSK size (0 means default) # # default-ksk-size=0 ################################# # default-soa-mail mail address to insert in the SOA record if none set in the backend # # default-soa-mail= ################################# # default-soa-name name to insert in the SOA record if none set in the backend # # default-soa-name=a.misconfigured.powerdns.server ################################# # default-ttl Seconds a result is valid if not set otherwise # # default-ttl=3600 ################################# # default-zsk-algorithms Default ZSK algorithms # # default-zsk-algorithms=rsasha256 ################################# # default-zsk-size Default KSK size (0 means default) # # default-zsk-size=0 ################################# # direct-dnskey Fetch DNSKEY RRs from backend during DNSKEY synthesis # # direct-dnskey=no ################################# # disable-axfr Disable zonetransfers but do allow TCP queries # # disable-axfr=no ################################# # disable-tcp Do not listen to TCP queries # # disable-tcp=no ################################# # distributor-threads Default number of Distributor (backend) threads to start # # distributor-threads=3 ################################# # do-ipv6-additional-processing Do AAAA additional processing # # do-ipv6-additional-processing=yes ################################# # edns-subnet-option-number EDNS option number to use # # edns-subnet-option-number=20730 ################################# # edns-subnet-processing If we should act on EDNS Subnet options # # edns-subnet-processing=no ################################# # entropy-source If set, read entropy from this file # # entropy-source=/dev/urandom ################################# # experimental-json-interface If the webserver should serve JSON data # # experimental-json-interface=no ################################# # experimental-logfile Filename of the log file for JSON parser # # experimental-logfile=/var/log/pdns.log ################################# # fancy-records Process URL and MBOXFW records # # fancy-records=no ################################# # guardian Run within a guardian process # # guardian=no ################################# # include-dir Include *.conf files from this directory # # include-dir= ################################# # launch Which backends to launch and order to query them in # # launch= ################################# # load-modules Load this module - supply absolute or relative path # # load-modules= ################################# # local-address Local IP addresses to which we bind # # local-address=0.0.0.0 ################################# # local-ipv6 Local IP address to which we bind # # local-ipv6= ################################# # local-port The port on which we listen # # local-port=53 ################################# # log-dns-details If PDNS should log DNS non-erroneous details # # log-dns-details= ################################# # log-dns-queries If PDNS should log all incoming DNS queries # # log-dns-queries=no ################################# # log-failed-updates If PDNS should log failed update requests # # log-failed-updates= ################################# # logging-facility Log under a specific facility # # logging-facility= ################################# # loglevel Amount of logging. Higher is more. Do not set below 3 # # loglevel=4 ################################# # lua-prequery-script Lua script with prequery handler # # lua-prequery-script= ################################# # master Act as a master # # master=no ################################# # max-cache-entries Maximum number of cache entries # # max-cache-entries=1000000 ################################# # max-ent-entries Maximum number of empty non-terminals in a zone # # max-ent-entries=100000 ################################# # max-nsec3-iterations Limit the number of NSEC3 hash iterations # # max-nsec3-iterations=500 ################################# # max-queue-length Maximum queuelength before considering situation lost # # max-queue-length=5000 ################################# # max-tcp-connections Maximum number of TCP connections # # max-tcp-connections=10 ################################# # module-dir Default directory for modules # # module-dir=/usr/local/lib ################################# # negquery-cache-ttl Seconds to store negative query results in the QueryCache # # negquery-cache-ttl=60 ################################# # no-shuffle Set this to prevent random shuffling of answers - for regression testing # # no-shuffle=off ################################# # out-of-zone-additional-processing Do out of zone additional processing # # out-of-zone-additional-processing=yes ################################# # overload-queue-length Maximum queuelength moving to packetcache only # # overload-queue-length=0 ################################# # pipebackend-abi-version Version of the pipe backend ABI # # pipebackend-abi-version=1 ################################# # prevent-self-notification Don't send notifications to what we think is ourself # # prevent-self-notification=yes ################################# # query-cache-ttl Seconds to store query results in the QueryCache # # query-cache-ttl=20 ################################# # query-local-address Source IP address for sending queries # # query-local-address=0.0.0.0 ################################# # query-local-address6 Source IPv6 address for sending queries # # query-local-address6=:: ################################# # query-logging Hint backends that queries should be logged # # query-logging=no ################################# # queue-limit Maximum number of milliseconds to queue a query # # queue-limit=1500 ################################# # receiver-threads Default number of receiver threads to start # # receiver-threads=1 ################################# # recursive-cache-ttl Seconds to store packets for recursive queries in the PacketCache # # recursive-cache-ttl=10 ################################# # recursor If recursion is desired, IP address of a recursing nameserver # # recursor=no ################################# # retrieval-threads Number of AXFR-retrieval threads for slave operation # # retrieval-threads=2 ################################# # security-poll-suffix Domain name from which to query security update notifications # # security-poll-suffix=secpoll.powerdns.com. ################################# # send-root-referral Send out old-fashioned root-referral instead of ServFail in case of no authority # # send-root-referral=no ################################# # server-id Returned when queried for 'server.id' TXT or NSID, defaults to hostname # # server-id= ################################# # setgid If set, change group id to this gid for more security # # setgid= ################################# # setuid If set, change user id to this uid for more security # # setuid= ################################# # signing-threads Default number of signer threads to start # # signing-threads=3 ################################# # slave Act as a slave # # slave=no ################################# # slave-cycle-interval Reschedule failed SOA serial checks once every .. seconds # # slave-cycle-interval=60 ################################# # slave-renotify If we should send out notifications for slaved updates # # slave-renotify=no ################################# # smtpredirector Our smtpredir MX host # # smtpredirector=a.misconfigured.powerdns.smtp.server ################################# # soa-expire-default Default SOA expire # # soa-expire-default=604800 ################################# # soa-minimum-ttl Default SOA minimum ttl # # soa-minimum-ttl=3600 ################################# # soa-refresh-default Default SOA refresh # # soa-refresh-default=10800 ################################# # soa-retry-default Default SOA retry # # soa-retry-default=3600 ################################# # soa-serial-offset Make sure that no SOA serial is less than this number # # soa-serial-offset=0 ################################# # socket-dir Where the controlsocket will live # # socket-dir=/var/run ################################# # tcp-control-address If set, PowerDNS can be controlled over TCP on this address # # tcp-control-address= ################################# # tcp-control-port If set, PowerDNS can be controlled over TCP on this address # # tcp-control-port=53000 ################################# # tcp-control-range If set, remote control of PowerDNS is possible over these networks only # # tcp-control-range=127.0.0.0/8, 10.0.0.0/8, 192.168.0.0/16, 172.16.0.0/12, ::1/128, fe80::/10 ################################# # tcp-control-secret If set, PowerDNS can be controlled over TCP after passing this secret # # tcp-control-secret= ################################# # traceback-handler Enable the traceback handler (Linux only) # # traceback-handler=yes ################################# # trusted-notification-proxy IP address of incoming notification proxy # # trusted-notification-proxy= ################################# # urlredirector Where we send hosts to that need to be url redirected # # urlredirector=127.0.0.1 ################################# # version-string PowerDNS version in packets - full, anonymous, powerdns or custom # # version-string=full ################################# # webserver Start a webserver for monitoring # # webserver=no ################################# # webserver-address IP Address of webserver to listen on # # webserver-address=127.0.0.1 ################################# # webserver-password Password required for accessing the webserver # # webserver-password= ################################# # webserver-port Port of webserver to listen on # # webserver-port=8081 ################################# # webserver-print-arguments If the webserver should print arguments # # webserver-print-arguments=no ################################# # wildcard-url Process URL and MBOXFW records # # wildcard-url=no include-dir=/etc/powerdns/conf.d module-dir=/usr/lib64/powerdns socket-dir=/run/powerdns setuid=powerdns setgid=powerdns launch=bind #recursor=127.0.0.1:5300
