Von: R Shapiro [rshapiro@bbn.com] Gesendet: Freitag, 29. September 2000 13:16 An: Halfmann, Klaus Betreff: Re: AW(n+1): hfsplus 1.0.1 readonly should be complete Halfmann, Klaus writes: > Please change it to 1.0.1 so we are in sync. Done. > Ill have word wit Suse > now if I can get some ftp/telnet acces. Does SuSE use rpms? I thought it was specific to RedHat/linuxppc.com. > Please send me that patch, Ill be happy to include it. (In fact I > might include everything needed to build an rpm. If you tell me how > I can do it myself for the next release :) I attached the source rpm. This includes the source tar (you don't need this obviously, but it's part of the package :), the patch file and the rpm spec file. To build the binary rpm from the source rpm do: rpm --rebuild hfsplusutils-1.0.1-1.src.rpm This will leave the binary rpm in /usr/src/redhat/RPMS/ppc/hfsplusutils-1.0.1-1.ppc.rpm The binary rpm is what you would usually distribute. I made the rpm to install your executables in /usr/bin and libs in /usr/lib, instead of /usr/local/bin and /usr/local/lib. I was trying to make it as close as possible to the hfsutils rpm. If you just want to look at the contents of the source rpm, do: rpm -i hfsplusutils-1.0.1-1.src.rpm The spec will be installed in /usr/src/redhat/SPECS and the source tar and the patch will be installed in /usr/src/redhat/SOURCES.