#!/usr/bin/env python ############################################################################# ## ## Copyright (C) 2010 Riverbank Computing Limited. ## Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies). ## All rights reserved. ## ## This file is part of the examples of PyQt. ## ## $QT_BEGIN_LICENSE:BSD$ ## You may use this file under the terms of the BSD license as follows: ## ## "Redistribution and use in source and binary forms, with or without ## modification, are permitted provided that the following conditions are ## met: ## * Redistributions of source code must retain the above copyright ## notice, this list of conditions and the following disclaimer. ## * Redistributions in binary form must reproduce the above copyright ## notice, this list of conditions and the following disclaimer in ## the documentation and/or other materials provided with the ## distribution. ## * Neither the name of Nokia Corporation and its Subsidiary(-ies) nor ## the names of its contributors may be used to endorse or promote ## products derived from this software without specific prior written ## permission. ## ## THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ## "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT ## LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR ## A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT ## OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, ## SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT ## LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, ## DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY ## THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ## (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE ## OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE." ## $QT_END_LICENSE$ ## ############################################################################# # This is only needed for Python v2 but is harmless for Python v3. import sip sip.setapi('QVariant', 2) from PyQt4 import QtCore, QtGui try: import application_rc3 except ImportError: import application_rc2 class MainWindow(QtGui.QMainWindow): def __init__(self): super(MainWindow, self).__init__() self.curFile = '' self.textEdit = QtGui.QTextEdit() self.setCentralWidget(self.textEdit) self.createActions() self.createMenus() self.createToolBars() self.createStatusBar() self.readSettings() self.textEdit.document().contentsChanged.connect(self.documentWasModified) self.setCurrentFile('') self.setUnifiedTitleAndToolBarOnMac(True) def closeEvent(self, event): if self.maybeSave(): self.writeSettings() event.accept() else: event.ignore() def newFile(self): if self.maybeSave(): self.textEdit.clear() self.setCurrentFile('') def open(self): if self.maybeSave(): fileName = QtGui.QFileDialog.getOpenFileName(self) if fileName: self.loadFile(fileName) def save(self): if self.curFile: return self.saveFile(self.curFile) return self.saveAs() def saveAs(self): fileName = QtGui.QFileDialog.getSaveFileName(self) if fileName: return self.saveFile(fileName) return False def about(self): QtGui.QMessageBox.about(self, "About Application", "The <b>Application</b> example demonstrates how to write " "modern GUI applications using Qt, with a menu bar, " "toolbars, and a status bar.") def documentWasModified(self): self.setWindowModified(self.textEdit.document().isModified()) def createActions(self): self.newAct = QtGui.QAction(QtGui.QIcon(':/images/new.png'), "&New", self, shortcut=QtGui.QKeySequence.New, statusTip="Create a new file", triggered=self.newFile) self.openAct = QtGui.QAction(QtGui.QIcon(':/images/open.png'), "&Open...", self, shortcut=QtGui.QKeySequence.Open, statusTip="Open an existing file", triggered=self.open) self.saveAct = QtGui.QAction(QtGui.QIcon(':/images/save.png'), "&Save", self, shortcut=QtGui.QKeySequence.Save, statusTip="Save the document to disk", triggered=self.save) self.saveAsAct = QtGui.QAction("Save &As...", self, shortcut=QtGui.QKeySequence.SaveAs, statusTip="Save the document under a new name", triggered=self.saveAs) self.exitAct = QtGui.QAction("E&xit", self, shortcut="Ctrl+Q", statusTip="Exit the application", triggered=self.close) self.cutAct = QtGui.QAction(QtGui.QIcon(':/images/cut.png'), "Cu&t", self, shortcut=QtGui.QKeySequence.Cut, statusTip="Cut the current selection's contents to the clipboard", triggered=self.textEdit.cut) self.copyAct = QtGui.QAction(QtGui.QIcon(':/images/copy.png'), "&Copy", self, shortcut=QtGui.QKeySequence.Copy, statusTip="Copy the current selection's contents to the clipboard", triggered=self.textEdit.copy) self.pasteAct = QtGui.QAction(QtGui.QIcon(':/images/paste.png'), "&Paste", self, shortcut=QtGui.QKeySequence.Paste, statusTip="Paste the clipboard's contents into the current selection", triggered=self.textEdit.paste) self.aboutAct = QtGui.QAction("&About", self, statusTip="Show the application's About box", triggered=self.about) self.aboutQtAct = QtGui.QAction("About &Qt", self, statusTip="Show the Qt library's About box", triggered=QtGui.qApp.aboutQt) self.cutAct.setEnabled(False) self.copyAct.setEnabled(False) self.textEdit.copyAvailable.connect(self.cutAct.setEnabled) self.textEdit.copyAvailable.connect(self.copyAct.setEnabled) def createMenus(self): self.fileMenu = self.menuBar().addMenu("&File") self.fileMenu.addAction(self.newAct) self.fileMenu.addAction(self.openAct) self.fileMenu.addAction(self.saveAct) self.fileMenu.addAction(self.saveAsAct) self.fileMenu.addSeparator(); self.fileMenu.addAction(self.exitAct) self.editMenu = self.menuBar().addMenu("&Edit") self.editMenu.addAction(self.cutAct) self.editMenu.addAction(self.copyAct) self.editMenu.addAction(self.pasteAct) self.menuBar().addSeparator() self.helpMenu = self.menuBar().addMenu("&Help") self.helpMenu.addAction(self.aboutAct) self.helpMenu.addAction(self.aboutQtAct) def createToolBars(self): self.fileToolBar = self.addToolBar("File") self.fileToolBar.addAction(self.newAct) self.fileToolBar.addAction(self.openAct) self.fileToolBar.addAction(self.saveAct) self.editToolBar = self.addToolBar("Edit") self.editToolBar.addAction(self.cutAct) self.editToolBar.addAction(self.copyAct) self.editToolBar.addAction(self.pasteAct) def createStatusBar(self): self.statusBar().showMessage("Ready") def readSettings(self): settings = QtCore.QSettings("Trolltech", "Application Example") pos = settings.value("pos", QtCore.QPoint(200, 200)) size = settings.value("size", QtCore.QSize(400, 400)) self.resize(size) self.move(pos) def writeSettings(self): settings = QtCore.QSettings("Trolltech", "Application Example") settings.setValue("pos", self.pos()) settings.setValue("size", self.size()) def maybeSave(self): if self.textEdit.document().isModified(): ret = QtGui.QMessageBox.warning(self, "Application", "The document has been modified.\nDo you want to save " "your changes?", QtGui.QMessageBox.Save | QtGui.QMessageBox.Discard | QtGui.QMessageBox.Cancel) if ret == QtGui.QMessageBox.Save: return self.save() elif ret == QtGui.QMessageBox.Cancel: return False return True def loadFile(self, fileName): file = QtCore.QFile(fileName) if not file.open(QtCore.QFile.ReadOnly | QtCore.QFile.Text): QtGui.QMessageBox.warning(self, "Application", "Cannot read file %s:\n%s." % (fileName, file.errorString())) return inf = QtCore.QTextStream(file) QtGui.QApplication.setOverrideCursor(QtCore.Qt.WaitCursor) self.textEdit.setPlainText(inf.readAll()) QtGui.QApplication.restoreOverrideCursor() self.setCurrentFile(fileName) self.statusBar().showMessage("File loaded", 2000) def saveFile(self, fileName): file = QtCore.QFile(fileName) if not file.open(QtCore.QFile.WriteOnly | QtCore.QFile.Text): QtGui.QMessageBox.warning(self, "Application", "Cannot write file %s:\n%s." % (fileName, file.errorString())) return False outf = QtCore.QTextStream(file) QtGui.QApplication.setOverrideCursor(QtCore.Qt.WaitCursor) outf << self.textEdit.toPlainText() QtGui.QApplication.restoreOverrideCursor() self.setCurrentFile(fileName); self.statusBar().showMessage("File saved", 2000) return True def setCurrentFile(self, fileName): self.curFile = fileName self.textEdit.document().setModified(False) self.setWindowModified(False) if self.curFile: shownName = self.strippedName(self.curFile) else: shownName = 'untitled.txt' self.setWindowTitle("%s[*] - Application" % shownName) def strippedName(self, fullFileName): return QtCore.QFileInfo(fullFileName).fileName() if __name__ == '__main__': import sys app = QtGui.QApplication(sys.argv) mainWin = MainWindow() mainWin.show() sys.exit(app.exec_())