# Baytech RPC3-NC via SNMP (also can drive with baytech-rpc3-nc.dev) # # Snmp v1 or v2c works. # # N.B. Occasionally snmp agent locks up and must be restarted by telnet or # serial: ;;;;; then Network Interface Module Login, then Unit Reset. # # Example device entry: # device "b" "baytech-snmp" "/usr/sbin/snmppower -h 192.168.1.95|&" specification "baytech-snmp" { timeout 10 # about 5 sec for cycle command plug name { "1" "2" "3" "4" "5" "6" "7" "8" } script login { expect "snmppower> " send "start_v2c private\n" expect "snmppower> " } script logout { send "finish\n" expect "snmppower> " } script status_all { send "get enterprises.4779.1.3.5.5.1.13.2.1\n" expect "enterprises.4779.1.3.5.5.1.13.2.1: (0|1),(0|1),(0|1),(0|1),(0|1),(0|1),(0|1),(0|1)\n" setplugstate "1" $1 off="0" on="1" setplugstate "2" $2 off="0" on="1" setplugstate "3" $3 off="0" on="1" setplugstate "4" $4 off="0" on="1" setplugstate "5" $5 off="0" on="1" setplugstate "6" $6 off="0" on="1" setplugstate "7" $7 off="0" on="1" setplugstate "8" $8 off="0" on="1" expect "snmppower> " } script on { send "set enterprises.4779.1.3.5.3.1.3.1.%s i 1\n" expect "enterprises.4779.1.3.5.3.1.3.1.[1-8]: 1\n" expect "snmppower> " } script off { send "set enterprises.4779.1.3.5.3.1.3.1.%s i 0\n" expect "enterprises.4779.1.3.5.3.1.3.1.[1-8]: 0\n" expect "snmppower> " } script cycle { send "set enterprises.4779.1.3.5.3.1.3.1.%s i 0\n" expect "enterprises.4779.1.3.5.3.1.3.1.[1-8]: 0\n" expect "snmppower> " delay 5 send "set enterprises.4779.1.3.5.3.1.3.1.%s i 1\n" expect "enterprises.4779.1.3.5.3.1.3.1.[1-8]: 1\n" expect "snmppower> " } }