1. INTRO

  All code in this server was written for this project.

  The server is mostly compatible with livingston radiusd-2.01
  (no menus or s/key support though) but with more features, such as:

    o Can limit the maximum number of simultaneous logins on a per-user basis!
    o Multiple DEFAULT entries, that can optionally fall-through.
    o In fact, every entry can fall-through
    o Deny/permit access based on huntgroup users dials into
    o Set certain parameters (such as static IP address) based on huntgroup
    o Extra "hints" file that can select SLIP/PPP/rlogin based on
      username pattern (Puser or user.ppp is PPP, plain "user" is rlogin etc).
    o Can execute an external program when user has authenticated (for example
      to run a sendmail queue).
    o Can use `$INCLUDE filename' in radiusd.conf, users, and dictionary files
    o Can act as a proxy server, relaying requests to a remote server
    o Supports Vendor-Specific attributes
    o Supports many different plug-in modules for authentication,
      authorization, and accounting.
    o No good documentation at all, just like the original radiusd 1.16!

  Work on real manual pages is progressing slowly. For a large part you
  can use the documentation of the Livingston 2.01 server. Just remember
  that using Prefix and Suffix in both the "users" and the (FreeRadius
  specific) "hints" file will give unpredictable results. Well actually
  it will result in Prefix and Suffix probably not working in the "users"
  file if you already stripped them off in the "hints" file.

2. INSTALLATION

   See the INSTALL file, in the parent directory.

3. CONFIGURATION FILES

  For every file there is a fully commented example file included, that
  explains what is does, and how to use it. Read those sample files too!

  Again, many of the configuration files are ONLY documented in the
  comments included in the files.  Reading the configuration files is
  REQUIRED to fully understand how to create complex configurations of
  the server.

3a. CLIENTS

  Make sure the clients (portmasters, Linux with portslave etc) are set up to
  use the host radiusd is running on as authentication and accounting host.
  Configure these clients to use a "radius secret password". For every client,
  also enter this "secret password" into the file /etc/raddb/clients.
  See also the manual page for clients(5).

3b. NASLIST

  Every NAS (Network Access Server, also known as terminal server) should have
  an entry in this file with an abbreviated name and the type of NAS it
  is. Currently FreeRadius supports the following NAS types:

  Terminal Server                       Type in naslist

  3Com/USR Hiper Arc Total Control      usrhiper
  3Com/USR NetServer                    netserver
  3Com/USR TotalControl                 tc
  Ascend Max 4000 family                max40xx
  Cisco Access Server family            cisco
  Cistron PortSlave                     portslave
  Computone PowerRack                   computone
  Cyclades PathRAS                      pathras
  Livingston PortMaster                 livingston
  Multitech CommPlete Server            multitech
  Patton 2800 family                    patton

  Usually this is the same list as in the "clients" file, but not every
  NAS is a client and not every client is a NAS (this will start to make
  sense if you use radius proxy servers).

3c. NASPASSWD

  If ``checkrad'' needs to login on your terminal server to check who
  is online on a certain port (i.e. it's not possible to use SNMP or
  finger) you need to define a loginname and password here.

  This is normally ONLY needed for USR/3Com Total Control, NetServer and
  Cyclades PathRAS terminal servers!

3d. HINTS

  Customize the /etc/raddb/hints file. This file is used to give users a
  different login type based on a prefix/suffix of their loginname. For
  example, logging in as "user" may result in a rlogin session to a Unix
  system, and logging in as "Puser" could start a PPP session.

3e. HUNTGROUPS

  This is the /etc/raddb/huntgroups file. Here you can define different
  huntgroups. These can be used to:

    - restrict access to certain huntgroups to certain users/groups of
      users (define this in the huntgroups file itself)
    - match a loginname with a huntgroup in /etc/raddb/users. One use
      for this is to give a user a static IP address based on the
      huntgroup / Point of Presence  (s)he dials in to.

3f. USERS

  With the original RADIUS server, every user had to be defined in this
  file. There could be one default entry, where you could for example
  define that a user not in the radius file would be checked agains the
  UNIX password file and on successful login would get a PPP connection.

  In the new style file, you can define multiple DEFAULT entries. All
  entries are processed in the order as they appear in the users file.
  If an entry matches the username, radiusd will stop scanning the users
  file unless the attribute "Fall-Through = Yes" is set.

  You can uses spaces in usernames by escaping them with \ or by using
  quotes. For example, "joe user" or joe\ user.

  The FreeRadius server does not trim any spaces from a username received
  from the portmaster (livingston does, in perl notation, $user =~ s/\s+.*//;)

3g. NEW RADIUS ATTRIBUTES (to be used in the USERS file).

  Name			Type		Descr.
  ----			----		------
  Simultaneous-Use	integer		Max. number of concurrent logins
  Fall-Through		integer		Yes/No
  Login-Time		string		Defines when user may login.
  Current-Time		string		Allows you to perform time-based
					checks when a request is received.

  Login-Time defines the time span a user may login to the system. The
  format of a so-called time string is like the format used by UUCP.
  A time string may be a list of simple time strings separated by "|" or ",".

  Each simple time string must begin with a day definition. That can be just
  one day, multiple days, or a range of days separated by a hyphen. A
  day is Mo, Tu, We, Th, Fr, Sa or Su, or Wk for Mo-Fr. "Any" or "Al"
  means all days.

  After that a range of hours follows in hhmm-hhmm format.

  For example, "Wk2305-0855,Sa,Su2305-1655".

  Radiusd calculates the number of seconds left in the time span, and
  sets the Session-Timeout to that number of seconds. So if someones
  Login-Time is "Al0800-1800" and she logs in at 17:30, Session-Timeout
  is set to 1800 seconds so that she is kicked off at 18:00.

4. LOG FILES

4a. /var/log/radutmp

  In this file the currently logged in users are held. The program "radwho"
  reads this file and gives you a summary. Rogue sessions can be deleted
  from this file with the "radzap" program.

4b. /var/log/radwtmp

  This file is "wtmp" compatible and keeps a history of all radius logins/
  logouts. This file can be read with the "last" program, and other Unix
  accounting programs (such as "ac" and "sac") can be used to produce a
  summary.

4c. /var/log/radius.log

  All RADIUS informational. diagnostic and error messages are logged in
  this file.  If radiusd has been started with the "-y" flag, all logins
  attempts will be logged in this file. For failed logins, the wrong password
  will also be logged.  With the "-z" flag, the passwords for successful
  logins will be logged as well. That's pretty dangerous though in case
  anyone unpriviliged ever manages to get access to this file!

4d. /var/log/radacct/<terminal_server>/detail

  This is the original radius logfile, as written by all the livingston
  radius servers. It's only created if the directory /var/log/radacct exists.
  The <terminal_server> name is the short name if one is defined in
  /etc/raddb/naslist.

  For more configuration options on the detail file please see
  README.rlm_detail as it expands upon this greatly.

5.  MORE INFO, SUPPORT

  We know that the documentation provided is sparse. However it is not in
  the scope of the radius server to provide a guide as to how terminal
  servers works and how the RADIUS protocol works and is used.

  The latest version of FreeRadius is always available through
  anonymous CVS from cvs.freeradius.org - for more info, see
  <URL: http://www.freeradius.org/>

  There are two GNU Mailman mailing lists hosted by Cistron Internet Services:
  a 'users' list, at:

	http://lists.freeradius.org/pipermail/freeradius-users/

  and a 'developers only' list, at

	http://lists.freeradius.org/pipermail/freeradius-devel/

6.  OTHER INFORMATION

  The files in other directories are:

  debian/	Files to build a "freeradius" Debian Linux package.

  dialup_admin/	A PHP web front-end to manage an SQL database associated
		with the server.

  doc/		Various snippets of documentation
  doc/rfc/	Copies of the RFC's.  If you have Perl, do a 'make' in
		that directory, and look at the HTML output.

  libltdl/	Libtool platform independent library system.

  man/		Unix Manual pages for the server, configuration files,
		and associated utilities.

  mibs/		SNMP Mibs for the server.

  raddb/	Sample configuration files for the server.

  redhat/	Additional files for a RedHat Linux system.

  scripts/	Sample scripts for startup and maintenance.

  src/		Source code
  src/main	source code for the daemon and associated utilities
  src/lib	source code for the RADIUS library
  src/include	header files
  src/modules	dynamic plug-in modules

  src/billing	Some scripts and configuration files to assist in billing,
		Currently mostly VoIP related.

  suse/		Aditional files for a SuSE (UnitedLinux) system.

  todo/		TODO list and assorted files.


  If you have ANY problems, concerns, or surprises when running the
server, then run it in debugging mode, as root, from the command line:

$ radiusd -X

It will produce a large number of messages.  The answers to many
questions, and the solution to many problems, can usually be found in
these messages.

  For further details, see:

  http://www.freeradius.org/faq/

  and the 'bugs' file, in this directory.

$Date$