# -*- text -*-
######################################################################
#
#	This is a virtual server that handles DHCP relaying
#
#	Only one server can listen on a socket, so you cannot
#	do DHCP relaying && run a DHCP server at the same time.
#
######################################################################

server dhcp.eth1 {
	# When the machine is not Linux, or has only one network interface, use
	# the following listener:
	listen {
		# Listen for broadcasts + unicast on eth1
		ipaddr = *
		port = 67
		type = dhcp
		interface = eth1
	}
	# When the machine is Linux and has multiple network interfaces, use
	# the following listeners instead:
	listen {
		# Listen for broadcasts on eth1
		ipaddr = 255.255.255.255
		port = 67
		type = dhcp
		interface = eth1
	}
	listen {
		# Listen for unicast on our IP address, not bound to any
		# interface but telling on which interface to forward the
		# packets to.
		ipaddr = 192.0.100.2
		port = 67
		type = dhcp
		arp_interface = eth1
	}

	#  Packets received on the socket will be processed through one
	#  of the following sections, named after the DHCP packet type.
	#  See dictionary.dhcp for the packet types.
	dhcp DHCP-Discover {
		update config {
			# IP Address of the DHCP server
			DHCP-Relay-To-IP-Address := 192.0.1.2
		}
		update request {
			# IP Address of the DHCP relay (eth1)
			DHCP-Gateway-IP-Address := 192.0.100.2
		}
		ok
	}

	dhcp DHCP-Request {
		update config {
			# IP Address of the DHCP server
			DHCP-Relay-To-IP-Address := 192.0.1.2
		}
		update request {
			DHCP-Gateway-IP-Address := 192.0.100.2
		}
		ok
	}
}