2008-11-20 Joerg Wunsch <j.gnu@uriah.heep.sax.de> * avrdude.h: Change the prototype for usleep() to be more Cygwin- friendly. * ppiwin.c: (Ditto.) 2008-11-06 Joerg Wunsch <j.gnu@uriah.heep.sax.de> Submitted by limor <limor@ladyada.net> * usbtiny.c (usbtiny_cmd): Replace sizeof() by a fixed constant 4 for the result array, because otherwise it would take the size of a pointer which miserably fails on 64-bit machines. 2008-11-05 Joerg Wunsch <j.gnu@uriah.heep.sax.de> patch #6609: Using PCI parallel port cards on Windows * ppiwin.c (ppi_open): If the port parameter passed from the -p option is neither lpt1/2/3, try interpreting it directly as a base address. * avrdude.1: Document the change. * doc/avrdude.texi: (Ditto.) 2008-11-04 Joerg Wunsch <j.gnu@uriah.heep.sax.de> bug #22882: Erase Cycle Counter does not work for stk500v2 * stk500v2.c (stk500v2_chip_erase,stk500hv_chip_erase): Return the expected 0 for success rather than a protocol-dependant number. 2008-11-04 Joerg Wunsch <j.gnu@uriah.heep.sax.de> bug #22883: Chip Erase performed even with no-write flag (-n) * main.c: Do not erase the chip if both, -e and -n options have been specified. 2008-11-04 Joerg Wunsch <j.gnu@uriah.heep.sax.de> bug #24589: AT90USB64* have wrong signature * avrdude.conf.in: Uncomment the correct, and delete the wrong signature for AT90USB646/647. Alas, the datasheet has never been corrected for years. 2008-10-31 Joerg Wunsch <j.gnu@uriah.heep.sax.de> * jtagmkII.c: Fix a serious memory corruption that happened when using the JTAG ICE mkII (or AVR Dragon) in ISP mode. The wrong set of per-programmer private data had been allocated (stk500v2 vs. jtagmkII) which was too small to hold the actual data. * jtagmkII.h: (Ditto.) * stk500v2.c: (Ditto.) 2008-07-29 Joerg Wunsch <j.gnu@uriah.heep.sax.de> * jtagmkII.c: Implement Xmega JTAG support. * jtagmkII_private.h: Add EMULATOR_MODE_JTAG_XMEGA. 2008-07-29 Joerg Wunsch <j.gnu@uriah.heep.sax.de> * main.c: Remember whether the device initialization worked, and allow to continue with -F if it failed yet do not attempt to perform anything on the device itself. That way, -tF could be specified for programmers like the STK500/STK600 even without a device connected, just in order to allow changing parameters on the programmer itself. * avrdude.1: Document that possible use of the -F option. * doc/avrdude.texi: (Ditto.) 2008-07-29 Joerg Wunsch <j.gnu@uriah.heep.sax.de> * stk500v2.c (stk600_xprog_paged_write): Fix a fatal miscalculation of the number of bytes to be written which caused a malloc chunk corruption. 2008-07-27 Joerg Wunsch <j.gnu@uriah.heep.sax.de> First implementation of ATxmega support. By now, only the PDI mode of the STK600 is supported. Single-byte EEPROM (and flash) updates do not work yet. * avr.c: "boot" memory is a candidate memory region for paged operations, besides "flash" and "eeprom". * avrdude.conf.in: add ATxmega128A1 and ATxmega128A1revD * avrpart.h: add the AVRPART_HAS_PDI flag (used to distinguish ATxmega parts from classic AVRs), the nvm_base part field, and the offset field for a memory region. * config_gram.y: add "has_pdi", "nvm_base", and "offset" * lexer.l: (Ditto.) * main.c: disable auto_erase for ATxmega parts * stk500v2.c: implement the XPROG functionality, and divert to this for ATxmega parts * avrdude.1: Document the changes. * doc/avrdude.texi: (Ditto.) 2008-07-25 Joerg Wunsch <j.gnu@uriah.heep.sax.de> Fix a bunch of warnings. * avr910.c (avr910_paged_load): possible unitialized use of rd_size * jtagmkI.c (jtagmkI_initialize): pointer signedness mixup * jtagmkII.c (jtagmkII_print_parms1): propagate const'ness of parameter * usbasp.c (usbasp_transmit): pointer signedness mixup * ser_avrdoper.c (usbGetReport): remove useless pointer deref 2008-07-25 Joerg Wunsch <j.gnu@uriah.heep.sax.de> Contributed by Ville Voipio: patch #6501: New autotools support for avrdude * Makefile.am: add @WINDOWS_DIRS@ to SUBDIR * bootstrap: allow for autconf-2.61 and automake-1.10, too * configure.ac: fix @WINDOWS_DIRS@ recursion, replace AC_PROG_CC by AM_PROG_CC_C_O, for esoteric reasons 2008-06-13 Joerg Wunsch <j.gnu@uriah.heep.sax.de> Contributed by Janos Sallai <janos.sallai@vanderbilt.edu>: patch #6074: added support for crossbow's MIB510 programmer * avrdude.conf.in: Add entry for mib510. * stk500.c: Add special hooks to handle the MIB510 programmer. It mostly talks STK500v1 protocol but has a special hello and goodbye sequence, and uses a fixed block size of 256 bytes. * doc/avrdude.texi: Document support for mib510. 2008-06-07 Joerg Wunsch <j.gnu@uriah.heep.sax.de> Contributed by Klaus Leidinger <klaus@mikrocontroller-projekte.de>: * main.c: Realign verbose messages. * avrpart.c: (Ditto.) * avr910.c: Print the device code selected in verbose mode. * butterfly.c: (Ditto.) 2008-06-07 Joerg Wunsch <j.gnu@uriah.heep.sax.de> Contributed by Klaus Leidinger <klaus@mikrocontroller-projekte.de>: Add check for buffermode feature, and use it if present. Can be turned off using -x no_blockmode. * avr910.c: Implement buffermode test and usage. * avrdude.1: Document -x no_blockmode. * doc/avrdude.texi: (Ditto.) 2008-03-24 Joerg Wunsch <j.gnu@uriah.heep.sax.de> * usb_libusb.c: #undef interface for Win32 2008-03-24 Joerg Wunsch <j.gnu@uriah.heep.sax.de> * avr910.c: Add support for the -x devcode option. * avrdude.1: Document -x devcode for avr910. * doc/avrdude.texi: (Ditto.) 2008-03-14 Joerg Wunsch <j.gnu@uriah.heep.sax.de> Add initial support for the Atmel STK600, for "classic" AVRs (AT90, ATtiny, ATmega) in both, ISP and high-voltage programming modes. * Makefile.am: Add -lm. * avrdude.conf.in: Add stk600, stk600pp, and stk600hvsp. * config_gram.y: Add support for the stk600* keywords. * lexer.l: (Ditto.) * pgm.h: Add the "chan" parameter to set_varef(). * stk500.c: (Ditto.) * serial.h: Add USB endpoint support to struct filedescriptor. * stk500v2.c: Implement the meat of the STK600 support. * stk500v2.h: Add new prototypes for stk600*() programmers. * stk500v2_private.h: Add new constants used in the STK600. * term.c: Add AREF channel support. * usb_libusb.c: Automatically determine the correct write endpoint ID, the STK600 uses 0x83 while all other tools use 0x82. Propagate the EP to use through struct filedescriptor. * usbdevs.h: Add the STK600 USB product ID. * tools/get-stk600-cards.xsl: XSL transformation for targetboards.xml to obtain the list of socket and routing card IDs, to be used in stk500v2.c (for displaying the names). * tools/get-stk600-devices.xsl: XSL transformation for targetboards.xml to obtain the table of socket/routing cards and their respective AVR device support for doc/avrdude.texi. * avrdude.1: Document all the STK600 stuff. * doc/avrdude.texi: Ditto. Added a new chapter for Programmer Specific Information. 2008-01-26 Joerg Wunsch <j.gnu@uriah.heep.sax.de> * stk500v2.c (stk500v2_recv): Make length computation unsigned so it cannot accidentally become negative.
