Marvell Armada CP110 System Controller 0
========================================

The CP110 is one of the two core HW blocks of the Marvell Armada 7K/8K
SoCs. It contains two sets of system control registers, System
Controller 0 and System Controller 1. This Device Tree binding allows
to describe the first system controller, which provides registers to
configure various aspects of the SoC.

For the top level node:
 - compatible: must be: "syscon", "simple-mfd";
 - reg: register area of the CP110 system controller 0

Clocks:
-------

The Device Tree node representing this System Controller 0 provides a
number of clocks:

 - a set of core clocks
 - a set of gatable clocks

Those clocks can be referenced by other Device Tree nodes using two
cells:
 - The first cell must be 0 or 1. 0 for the core clocks and 1 for the
   gatable clocks.
 - The second cell identifies the particular core clock or gatable
   clocks.

The following clocks are available:
 - Core clocks
   - 0 0	APLL
   - 0 1	PPv2 core
   - 0 2	EIP
   - 0 3	Core
   - 0 4	NAND core
   - 0 5	SDIO core
 - Gatable clocks
   - 1 0	Audio
   - 1 1	Comm Unit
   - 1 2	NAND
   - 1 3	PPv2
   - 1 4	SDIO
   - 1 5	MG Domain
   - 1 6	MG Core
   - 1 7	XOR1
   - 1 8	XOR0
   - 1 9	GOP DP
   - 1 11	PCIe x1 0
   - 1 12	PCIe x1 1
   - 1 13	PCIe x4
   - 1 14	PCIe / XOR
   - 1 15	SATA
   - 1 16	SATA USB
   - 1 17	Main
   - 1 18	SD/MMC/GOP
   - 1 21	Slow IO (SPI, NOR, BootROM, I2C, UART)
   - 1 22	USB3H0
   - 1 23	USB3H1
   - 1 24	USB3 Device
   - 1 25	EIP150
   - 1 26	EIP197

Required properties:

 - compatible: must be:
     "marvell,cp110-clock"
 - #clock-cells: must be set to 2

Pinctrl:
--------

For common binding part and usage, refer to the file
Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt.

Required properties:

- compatible: "marvell,armada-7k-pinctrl",
  "marvell,armada-8k-cpm-pinctrl" or "marvell,armada-8k-cps-pinctrl"
  depending on the specific variant of the SoC being used.

Available mpp pins/groups and functions:
Note: brackets (x) are not part of the mpp name for marvell,function and given
only for more detailed description in this document.

name	pins	functions
================================================================================
mpp0	0	gpio, dev(ale1), au(i2smclk), ge0(rxd3), tdm(pclk), ptp(pulse), mss_i2c(sda), uart0(rxd), sata0(present_act), ge(mdio)
mpp1	1	gpio, dev(ale0), au(i2sdo_spdifo), ge0(rxd2), tdm(drx), ptp(clk), mss_i2c(sck), uart0(txd), sata1(present_act), ge(mdc)
mpp2	2	gpio, dev(ad15), au(i2sextclk), ge0(rxd1), tdm(dtx), mss_uart(rxd), ptp(pclk_out), i2c1(sck), uart1(rxd), sata0(present_act), xg(mdc)
mpp3	3	gpio, dev(ad14), au(i2slrclk), ge0(rxd0), tdm(fsync), mss_uart(txd), pcie(rstoutn), i2c1(sda), uart1(txd), sata1(present_act), xg(mdio)
mpp4	4	gpio, dev(ad13), au(i2sbclk), ge0(rxctl), tdm(rstn), mss_uart(rxd), uart1(cts), pcie0(clkreq), uart3(rxd), ge(mdc)
mpp5	5	gpio, dev(ad12), au(i2sdi), ge0(rxclk), tdm(intn), mss_uart(txd), uart1(rts), pcie1(clkreq), uart3(txd), ge(mdio)
mpp6	6	gpio, dev(ad11), ge0(txd3), spi0(csn2), au(i2sextclk), sata1(present_act), pcie2(clkreq), uart0(rxd), ptp(pulse)
mpp7	7	gpio, dev(ad10), ge0(txd2), spi0(csn1), spi1(csn1), sata0(present_act), led(data), uart0(txd), ptp(clk)
mpp8	8	gpio, dev(ad9), ge0(txd1), spi0(csn0), spi1(csn0), uart0(cts), led(stb), uart2(rxd), ptp(pclk_out), synce1(clk)
mpp9	9	gpio, dev(ad8), ge0(txd0), spi0(mosi), spi1(mosi), pcie(rstoutn), synce2(clk)
mpp10	10	gpio, dev(readyn), ge0(txctl), spi0(miso), spi1(miso), uart0(cts), sata1(present_act)
mpp11	11	gpio, dev(wen1), ge0(txclkout), spi0(clk), spi1(clk), uart0(rts), led(clk), uart2(txd), sata0(present_act)
mpp12	12	gpio, dev(clk_out), nf(rbn1), spi1(csn1), ge0(rxclk)
mpp13	13	gpio, dev(burstn), nf(rbn0), spi1(miso), ge0(rxctl), mss_spi(miso)
mpp14	14	gpio, dev(bootcsn), dev(csn0), spi1(csn0), spi0(csn3), au(i2sextclk), spi0(miso), sata0(present_act), mss_spi(csn)
mpp15	15	gpio, dev(ad7), spi1(mosi), spi0(mosi), mss_spi(mosi), ptp(pulse_cp2cp)
mpp16	16	gpio, dev(ad6), spi1(clk), mss_spi(clk)
mpp17	17	gpio, dev(ad5), ge0(txd3)
mpp18	18	gpio, dev(ad4), ge0(txd2), ptp(clk_cp2cp)
mpp19	19	gpio, dev(ad3), ge0(txd1), wakeup(out_cp2cp)
mpp20	20	gpio, dev(ad2), ge0(txd0)
mpp21	21	gpio, dev(ad1), ge0(txctl), sei(in_cp2cp)
mpp22	22	gpio, dev(ad0), ge0(txclkout), wakeup(in_cp2cp)
mpp23	23	gpio, dev(a1), au(i2smclk), link(rd_in_cp2cp)
mpp24	24	gpio, dev(a0), au(i2slrclk)
mpp25	25	gpio, dev(oen), au(i2sdo_spdifo)
mpp26	26	gpio, dev(wen0), au(i2sbclk)
mpp27	27	gpio, dev(csn0), spi1(miso), mss_gpio4, ge0(rxd3), spi0(csn4), ge(mdio), sata0(present_act), uart0(rts), rei(in_cp2cp)
mpp28	28	gpio, dev(csn1), spi1(csn0), mss_gpio5, ge0(rxd2), spi0(csn5), pcie2(clkreq), ptp(pulse), ge(mdc), sata1(present_act), uart0(cts), led(data)
mpp29	29	gpio, dev(csn2), spi1(mosi), mss_gpio6, ge0(rxd1), spi0(csn6), pcie1(clkreq), ptp(clk), mss_i2c(sda), sata0(present_act), uart0(rxd), led(stb)
mpp30	30	gpio, dev(csn3), spi1(clk), mss_gpio7, ge0(rxd0), spi0(csn7), pcie0(clkreq), ptp(pclk_out), mss_i2c(sck), sata1(present_act), uart0(txd), led(clk)
mpp31	31	gpio, dev(a2), mss_gpio4, pcie(rstoutn), ge(mdc)
mpp32	32	gpio, mii(col), mii(txerr), mss_spi(miso), tdm(drx), au(i2sextclk), au(i2sdi), ge(mdio), sdio(v18_en), pcie1(clkreq), mss_gpio0
mpp33	33	gpio, mii(txclk), sdio(pwr10), mss_spi(csn), tdm(fsync), au(i2smclk), sdio(bus_pwr), xg(mdio), pcie2(clkreq), mss_gpio1
mpp34	34	gpio, mii(rxerr), sdio(pwr11), mss_spi(mosi), tdm(dtx), au(i2slrclk), sdio(wr_protect), ge(mdc), pcie0(clkreq), mss_gpio2
mpp35	35	gpio, sata1(present_act), i2c1(sda), mss_spi(clk), tdm(pclk), au(i2sdo_spdifo), sdio(card_detect), xg(mdio), ge(mdio), pcie(rstoutn), mss_gpio3
mpp36	36	gpio, synce2(clk), i2c1(sck), ptp(clk), synce1(clk), au(i2sbclk), sata0(present_act), xg(mdc), ge(mdc), pcie2(clkreq), mss_gpio5
mpp37	37	gpio, uart2(rxd), i2c0(sck), ptp(pclk_out), tdm(intn), mss_i2c(sck), sata1(present_act), ge(mdc), xg(mdc), pcie1(clkreq), mss_gpio6, link(rd_out_cp2cp)
mpp38	38	gpio, uart2(txd), i2c0(sda), ptp(pulse), tdm(rstn), mss_i2c(sda), sata0(present_act), ge(mdio), xg(mdio), au(i2sextclk), mss_gpio7, ptp(pulse_cp2cp)
mpp39	39	gpio, sdio(wr_protect), au(i2sbclk), ptp(clk), spi0(csn1), sata1(present_act), mss_gpio0
mpp40	40	gpio, sdio(pwr11), synce1(clk), mss_i2c(sda), au(i2sdo_spdifo), ptp(pclk_out), spi0(clk), uart1(txd), ge(mdio), sata0(present_act), mss_gpio1
mpp41	41	gpio, sdio(pwr10), sdio(bus_pwr), mss_i2c(sck), au(i2slrclk), ptp(pulse), spi0(mosi), uart1(rxd), ge(mdc), sata1(present_act), mss_gpio2, rei(out_cp2cp)
mpp42	42	gpio, sdio(v18_en), sdio(wr_protect), synce2(clk), au(i2smclk), mss_uart(txd), spi0(miso), uart1(cts), xg(mdc), sata0(present_act), mss_gpio4
mpp43	43	gpio, sdio(card_detect), synce1(clk), au(i2sextclk), mss_uart(rxd), spi0(csn0), uart1(rts), xg(mdio), sata1(present_act), mss_gpio5, wakeup(out_cp2cp)
mpp44	44	gpio, ge1(txd2), uart0(rts), ptp(clk_cp2cp)
mpp45	45	gpio, ge1(txd3), uart0(txd), pcie(rstoutn)
mpp46	46	gpio, ge1(txd1), uart1(rts)
mpp47	47	gpio, ge1(txd0), spi1(clk), uart1(txd), ge(mdc)
mpp48	48	gpio, ge1(txctl_txen), spi1(mosi), xg(mdc), wakeup(in_cp2cp)
mpp49	49	gpio, ge1(txclkout), mii(crs), spi1(miso), uart1(rxd), ge(mdio), pcie0(clkreq), sdio(v18_en), sei(out_cp2cp)
mpp50	50	gpio, ge1(rxclk), mss_i2c(sda), spi1(csn0), uart2(txd), uart0(rxd), xg(mdio), sdio(pwr11)
mpp51	51	gpio, ge1(rxd0), mss_i2c(sck), spi1(csn1), uart2(rxd), uart0(cts), sdio(pwr10)
mpp52	52	gpio, ge1(rxd1), synce1(clk), synce2(clk), spi1(csn2), uart1(cts), led(clk), pcie(rstoutn), pcie0(clkreq)
mpp53	53	gpio, ge1(rxd2), ptp(clk), spi1(csn3), uart1(rxd), led(stb), sdio(led)
mpp54	54	gpio, ge1(rxd3), synce2(clk), ptp(pclk_out), synce1(clk), led(data), sdio(hw_rst), sdio(wr_protect)
mpp55	55	gpio, ge1(rxctl_rxdv), ptp(pulse), sdio(led), sdio(card_detect)
mpp56	56	gpio, tdm(drx), au(i2sdo_spdifo), spi0(clk), uart1(rxd), sata1(present_act), sdio(clk)
mpp57	57	gpio, mss_i2c(sda), ptp(pclk_out), tdm(intn), au(i2sbclk), spi0(mosi), uart1(txd), sata0(present_act), sdio(cmd)
mpp58	58	gpio, mss_i2c(sck), ptp(clk), tdm(rstn), au(i2sdi), spi0(miso), uart1(cts), led(clk), sdio(d0)
mpp59	59	gpio, mss_gpio7, synce2(clk), tdm(fsync), au(i2slrclk), spi0(csn0), uart0(cts), led(stb), uart1(txd), sdio(d1)
mpp60	60	gpio, mss_gpio6, ptp(pulse), tdm(dtx), au(i2smclk), spi0(csn1), uart0(rts), led(data), uart1(rxd), sdio(d2)
mpp61	61	gpio, mss_gpio5, ptp(clk), tdm(pclk), au(i2sextclk), spi0(csn2), uart0(txd), uart2(txd), sata1(present_act), ge(mdio), sdio(d3)
mpp62	62	gpio, mss_gpio4, synce1(clk), ptp(pclk_out), sata1(present_act), spi0(csn3), uart0(rxd), uart2(rxd), sata0(present_act), ge(mdc)

GPIO:
-----

For common binding part and usage, refer to
Documentation/devicetree/bindings/gpio/gpio-mvebu.txt.

Required properties:

- compatible: "marvell,armada-8k-gpio"

- offset: offset address inside the syscon block

Example:

cpm_syscon0: system-controller@440000 {
	compatible = "syscon", "simple-mfd";
	reg = <0x440000 0x1000>;

	cpm_clk: clock {
		compatible = "marvell,cp110-clock";
		#clock-cells = <2>;
	};

	cpm_pinctrl: pinctrl {
		compatible = "marvell,armada-8k-cpm-pinctrl";
	};

	cpm_gpio1: gpio@100 {
		compatible = "marvell,armada-8k-gpio";
		offset = <0x100>;
		ngpios = <32>;
		gpio-controller;
		#gpio-cells = <2>;
		gpio-ranges = <&cpm_pinctrl 0 0 32>;
	};

};