abcmatch version 1.35 January 15 2006.
seymour shlien <fy733@ncf.ca>
Introduction:
------------
The purpose of this program is to search for specific sequences of
notes in an abc file composed of many tunes. For example, if you
know a few bars of a tune, you can use this program to find the
tune having this sequence and perhaps identify the tune.
At a minimum, abcmatch requires two files. A template file called
match.abc which contains the bars that you are searching for and
a large file consisting of a hundred or more abc tunes.
The program automatically loads up the match.abc file and
then scans every tune in the large file.
The match.abc file is a regularly formatted abc file containing
the basic fields, X:, M:, L:, and K: and the body.
Normally, this file is created by runabc.tcl.
An example match.abc file is shown below.
X:1
M:6/8
L:1/8
K:E
cff f2e|
As well as the sample bars, abcmatch needs to know the meter
(given by M:) and the key signature (given by K:). The default note
length L: should also be given if it is not 1/8. It is important
that all bars be terminated with a bar line indicated by |
(otherwise that bar may not be seen by the program).
Abcmatch uses the key signature to know the relative position
of the notes in the scale. It also uses the key signature to
determine all the assumed sharps and flats. Thus the program
can find matching bars in a tune transposed to another key
signature (assuming the key difference is not too large).
When the program finds matches, they are returned in a list that
looks like this.
abcmatch.exe scotjig.abc
29 30 4
30 31 4
Each line indicates a particular match made by the program.
The first number, (eg. 29) indicates the relative position of
the tune in the abc file. Thus in this example, it indicates
that a match was found for the 29 th tune in compilation file
scotjib.abc. The next number is the X: reference number of
that tune, and the last number is the bar number of the matching
tune. Bar numbers are counted sequentially from the start of
the tune, ignoring all V: and P: indications. Thus the bar
numbers may not match the ones you get when you print the
tune using one of the variants of abc2ps or yaps.
Though the program can be run stand alone, it is really meant to
be run with a graphics user interface such as runabc.tcl (version
1.59 or higher). Most of its output is rather cryptic.
In performing the match, the program ignores all guitar chords,
karaoke, note decorations (eg. stacatto markings), grace notes
and hornpipe rhythm indications in either the match.abc template
file or in the target file. Furthermore if chords in the form
of [G2c2] are embedded in the abc file, only the higher note
c2 is matched. Any warnings and error messages that are normally
returned by the parser are suppressed unless the run time
parameter -c is included.
Installation:
------------
Unless you are running the program on Microsoft's windows
operating system, it will be necessary for you to build the
program from sources. For windows environment, I shall provide
the executable. Here is how the makefile looks.
CFLAGS=-c
abcmatch: parseabc.o matchsup.o abcmatch.o
gcc parseabc.o matchsup.o abcmatch.o -o abcmatch.exe
parseabc.o : parseabc.c abc.h
gcc $(CFLAGS) abcparse.c
matchsup.o : matchsup.c abc.h
gcc $(CFLAGS) abcstore.c
abcmatch.o : abcmatch.c abc.h
gcc $(CFLAGS) abcmatch.c
The program has been built using the gcc (GNU compiler) as well
as Microsoft Visual C++ (with many warning messages).
Operation:
---------
Here is now an explanation of the program and its run time
parameters. If you run abcmatch without any parameters you
will see:
abcmatch version 1.55
Usage : abcmatch <abc file> [-options]
[reference number] selects a tune
-c returns error and warning messages
-v selects verbose option
-r resolution for matching
-con pitch contour match
-fixed <n> fixed number of notes
-qnt quantized pitch contour
-lev use levenshtein distance
-a report any matching bars (default all bars)
-ign ignore simple bars
-br %d only report number of matched bars when
above given threshold
-tp <abc file> [reference number]
-ver returns version number
-pitch_hist pitch histogram
-wpitch_hist interval weighted pitch histogram
-length_hist pitch histogram
-interval_hist pitch interval histogram
-pitch_table separate pitch pdfs for each tune
-interval_table separate interval pdfs for each tune
When running this program, you must provide the name of the abc file name
containing the numerous tunes. The other parameters are optional and
are explained below.
The -c and -v options are mainly used for debugging when the
program does not do what was expected. The -ver option does
nothing but return the version number of the program. (This
is used to perform a sanity check when you are running it
from runabc).
All the remaining parameters (-r -con -a -br) control the matching
process.
The option -norhythm, causes the matching algorithm to ignore
the length of notes in a bar, thus E3/2F/D GA2 would match
EFD G2A. The option ignores -r parameter since it is now
irrelevant.
The option -pitch_table is used to produce a interval weighted
pitch histogram for each tune in the file. If this is saved
in an external file, that file could be used as a database
for finding tunes with similar pitch probability density functions
(pdf).
The -r parameter controls how the matching criterion handles
small rhythm variations in the melody. The -r option must be
followed by a number which specifies the temporal resolution
for the match. When the number is zero, this indicates that
a perfect match should be performed, meaning that the lengths
of each note in the bar must match exactly in order to be
reported. For larger values a looser match will be performed
as described below. Note lengths are converted into temporal
units where a quarter note normally is assigned a value of
24. Therefore an eight note has a value of 12, a sixteenth has
a value of 6, a half note has a value of 48 and etc. If you
specify a temporal resolution of 12, then the pitch values
of the notes only need to match at time units which are multiples
of an eighth note.
This means that the program would match the two bars
C2 D2| and C C D D|.
Similarly C2 D2| would also match C/D/C/D/D2|. By using
a suitable value of the resolution, you can perform the
matching only at the beginning of a measure or at the
beginning of each beat.
The -fixed <n> option causes the program to disregard
bar lines when does the matching. It allows matching
of notes between tunes having different time signatures.
n is a number which specifies the exact number of
notes to match. For example if n is 4, the program
could match
|C E G E| .. with |C E|G E|
Note the matcher still starts at a beginning
of a given bar for both the tune and template.
Normally, when the program is presented with a sequence
of several bars, the program will try it match it with
a matching sequence. If abcmatch is run with the -a option,
then the bars are matched individually in any sequence.
In other words any matching bar found is reported.
The -con option specifies contour matching. In this case,
the program uses the key signature only to indicate accidentals.
The pitch contour is computed from the pitch difference
or interval between adjacent notes.
Thus C2 DE| and c2 de| and G2 AB| all have the same pitch
contour.
The -qnt option will use the contour matching algorithm
but also quantize the intervals using the following table
unison and semitone 0
minor 2nd to major 2nd 1
minor 3rd to major 3rd 2
any larger interval 3
negative numbers are descending intervals.
The -tp followed by a file name and reference number
allows you to substitute any tune for the template match.abc.
When using this feature, the entire tune is used as a
template. Abcmatch does not match the template with itself,
and only bars which match bars in other tunes are reported.
The -br followed by a threshold, runs the program in a brief
mode designed to identify groups of tunes sharing common bars.
(-br stands for brief mode; I cannot think of a better name
right now.) In this mode, the program counts the numbers of bars
in the test tune which are also present in match.abc. If the
number of common bars is larger or equal to the threshold
then the program reports the tune and the number of common bars.
The program scans all the tunes in the abc file and returns
a list of all the tunes which have more than a specific number
of bars in common with the template, match.abc. In actual
use, the program is run repeatedly by a script. For each
tune in a abc file, it creates a template file called match.abc
and then executes abcmatch. The outputs are displayed on the
screen in a form easy to interpret. Currently, the user
has no control of the matching criterion. The rhythm must
match exactly and the notes are transposed to suit the key
signature. In other words the -r parameter is zero independent
of what is specified in the parameter list.
The -pitch_hist or -length_hist runs the program in another mode.
It produces a histogram of the distribution of the notes in the
abc file. Thus if you type
abcmatch.exe scotjig.abc -pitch_hist
pitch_histogram
64 2
66 9
67 11
69 30
71 18
73 12
74 14
76 14
78 14
79 4
81 4
The pitch is indicated in midi units. Thus middle C is 60 and the
pitches go up in semitone units. Following the pitch is a count
of the number of times that note occurred. If you type
abcmatch.exe scotjig.abc -length_hist
length histogram
12 100
24 20
36 6
48 2
72 4
The program quantizes a quarter note into 24 units. Thus eighth notes
have a value of 12, dotted half notes 72, etc. The program does
not require the match.abc file to be present if you are computing
the histograms since it does not perform any matching.
abcmatch.exe scotjig.abc -interval_hist
computes the histogram of the pitch interval in midi units
between adjacent notes. The histogram is restricted between
intervals -12 and 12 units.
eg.
interval_histogram
-5 2
-4 3
-3 10
-2 17
-1 3
0 8
1 3
2 23
3 11
4 1
5 4
For a collection of tunes in a file, you can use -pitch_table
or -interval_table to create a database for future analysis.
Limits of the program
---------------------
The program has some limits. For example, the abc file must
have bar lines. Tied notes cannot be longer than 8 quarter notes.
Specifying a too small resolution (eg. -r 1) may causes some
buffers to be exceeded. When there are differences of key
signatures more than 5 semitones, the program may transpose
the notes in the wrong direction.
Abc tunes with more than one key signature or time signature
may not be processed correctly.
Comment:
________
This program is designed to be a research tool to find
similarities between abc tunes. I have discovered a few
problems with tied notes and double or triple bar lines.
