--- wpa_supplicant-2.8/wpa_supplicant/defconfig.orig 2019-05-12 21:21:29.105768978 -0400 +++ wpa_supplicant-2.8/wpa_supplicant/defconfig 2019-05-12 21:25:46.056985527 -0400 @@ -80,10 +80,10 @@ CONFIG_DRIVER_WIRED=y #CONFIG_DRIVER_MACSEC_LINUX=y # Driver interface for the Broadcom RoboSwitch family -#CONFIG_DRIVER_ROBOSWITCH=y +CONFIG_DRIVER_ROBOSWITCH=y # Driver interface for no driver (e.g., WPS ER only) -#CONFIG_DRIVER_NONE=y +CONFIG_DRIVER_NONE=y # Solaris libraries #LIBS += -lsocket -ldlpi -lnsl @@ -118,16 +118,16 @@ CONFIG_EAP_GTC=y CONFIG_EAP_OTP=y # EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used) -#CONFIG_EAP_SIM=y +CONFIG_EAP_SIM=y # Enable SIM simulator (Milenage) for EAP-SIM #CONFIG_SIM_SIMULATOR=y # EAP-PSK (experimental; this is _not_ needed for WPA-PSK) -#CONFIG_EAP_PSK=y +CONFIG_EAP_PSK=y # EAP-pwd (secure authentication using only a password) -CONFIG_EAP_PWD=y +#CONFIG_EAP_PWD=y # EAP-PAX CONFIG_EAP_PAX=y @@ -133,14 +133,14 @@ CONFIG_EAP_PAX=y CONFIG_EAP_LEAP=y # EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used) -#CONFIG_EAP_AKA=y +CONFIG_EAP_AKA=y # EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used). # This requires CONFIG_EAP_AKA to be enabled, too. -#CONFIG_EAP_AKA_PRIME=y +CONFIG_EAP_AKA_PRIME=y # Enable USIM simulator (Milenage) for EAP-AKA -#CONFIG_USIM_SIMULATOR=y +CONFIG_USIM_SIMULATOR=y # EAP-SAKE CONFIG_EAP_SAKE=y @@ -182,7 +182,7 @@ CONFIG_SMARTCARD=y # PC/SC interface for smartcards (USIM, GSM SIM) # Enable this if EAP-SIM or EAP-AKA is included -#CONFIG_PCSC=y +CONFIG_PCSC=y # Support HT overrides (disable HT/HT40, mask MCS rates, etc.) #CONFIG_HT_OVERRIDES=y @@ -209,7 +209,7 @@ CONFIG_CTRL_IFACE=y # When building a wpa_cli binary for distribution, please note that these # libraries are licensed under GPL and as such, BSD license may not apply for # the resulting binary. -#CONFIG_READLINE=y +CONFIG_READLINE=y # Include internal line edit mode in wpa_cli. This can be used as a replacement # for GNU Readline to provide limited command line editing and history support. @@ -406,7 +406,7 @@ CONFIG_DEBUG_SYSLOG=y # Enable mitigation against certain attacks against TKIP by delaying Michael # MIC error reports by a random amount of time between 0 and 60 seconds -#CONFIG_DELAYED_MIC_ERROR_REPORT=y +CONFIG_DELAYED_MIC_ERROR_REPORT=y # Enable tracing code for developer debugging # This tracks use of memory allocations and other registrations and reports @@ -463,11 +463,11 @@ CONFIG_DEBUG_SYSLOG=y #CONFIG_GETRANDOM=y # IEEE 802.11n (High Throughput) support (mainly for AP mode) -CONFIG_IEEE80211N=y +#CONFIG_IEEE80211N=y # IEEE 802.11ac (Very High Throughput) support (mainly for AP mode) # (depends on CONFIG_IEEE80211N) -CONFIG_IEEE80211AC=y +#CONFIG_IEEE80211AC=y # Wireless Network Management (IEEE Std 802.11v-2011) # Note: This is experimental and not complete implementation. @@ -477,10 +477,10 @@ CONFIG_IEEE80211AC=y # This can be used to enable functionality to improve interworking with # external networks (GAS/ANQP to learn more about the networks and network # selection based on available credentials). -CONFIG_INTERWORKING=y +#CONFIG_INTERWORKING=y # Hotspot 2.0 -CONFIG_HS20=y +#CONFIG_HS20=y # Enable interface matching in wpa_supplicant #CONFIG_MATCH_IFACE=y