.. _image-file-formats:
Image file formats
==================
The Python Imaging Library supports a wide variety of raster file formats.
Over 30 different file formats can be identified and read by the library.
Write support is less extensive, but most common interchange and presentation
formats are supported.
The :py:meth:`~PIL.Image.Image.open` function identifies files from their
contents, not their names, but the :py:meth:`~PIL.Image.Image.save` method
looks at the name to determine which format to use, unless the format is given
explicitly.
Fully supported formats
-----------------------
.. contents::
BMP
^^^
PIL reads and writes Windows and OS/2 BMP files containing ``1``, ``L``, ``P``,
or ``RGB`` data. 16-colour images are read as ``P`` images. Run-length encoding
is not supported.
The :py:meth:`~PIL.Image.Image.open` method sets the following
:py:attr:`~PIL.Image.Image.info` properties:
**compression**
Set to ``bmp_rle`` if the file is run-length encoded.
EPS
^^^
PIL identifies EPS files containing image data, and can read files that contain
embedded raster images (ImageData descriptors). If Ghostscript is available,
other EPS files can be read as well. The EPS driver can also write EPS
images. The EPS driver can read EPS images in ``L``, ``LAB``, ``RGB`` and
``CMYK`` mode, but Ghostscript may convert the images to ``RGB`` mode rather
than leaving them in the original color space. The EPS driver can write images
in ``L``, ``RGB`` and ``CMYK`` modes.
If Ghostscript is available, you can call the :py:meth:`~PIL.Image.Image.load`
method with the following parameter to affect how Ghostscript renders the EPS
**scale**
Affects the scale of the resultant rasterized image. If the EPS suggests
that the image be rendered at 100px x 100px, setting this parameter to
2 will make the Ghostscript render a 200px x 200px image instead. The
relative position of the bounding box is maintained::
im = Image.open(...)
im.size #(100,100)
im.load(scale=2)
im.size #(200,200)
GIF
^^^
PIL reads GIF87a and GIF89a versions of the GIF file format. The library writes
run-length encoded files in GIF87a by default, unless GIF89a features
are used or GIF89a is already in use.
Note that GIF files are always read as grayscale (``L``)
or palette mode (``P``) images.
The :py:meth:`~PIL.Image.Image.open` method sets the following
:py:attr:`~PIL.Image.Image.info` properties:
**background**
Default background color (a palette color index).
**transparency**
Transparency color index. This key is omitted if the image is not
transparent.
**version**
Version (either ``GIF87a`` or ``GIF89a``).
**duration**
May not be present. The time to display the current frame
of the GIF, in milliseconds.
**loop**
May not be present. The number of times the GIF should loop. 0 means that
it will loop forever.
**comment**
May not be present. A comment about the image.
**extension**
May not be present. Contains application specific information.
Reading sequences
~~~~~~~~~~~~~~~~~
The GIF loader supports the :py:meth:`~file.seek` and :py:meth:`~file.tell`
methods. You can seek to the next frame (``im.seek(im.tell() + 1)``), or rewind
the file by seeking to the first frame. Random access is not supported.
``im.seek()`` raises an ``EOFError`` if you try to seek after the last frame.
Saving
~~~~~~
When calling :py:meth:`~PIL.Image.Image.save`, the following options
are available::
im.save(out, save_all=True, append_images=[im1, im2, ...])
**save_all**
If present and true, all frames of the image will be saved. If
not, then only the first frame of a multiframe image will be saved.
**append_images**
A list of images to append as additional frames. Each of the
images in the list can be single or multiframe images.
This is currently supported for GIF, PDF, TIFF, and WebP.
It is also supported for ICNS. If images are passed in of relevant sizes,
they will be used instead of scaling down the main image.
**include_color_table**
Whether or not to include local color table.
**interlace**
Whether or not the image is interlaced. By default, it is, unless the image
is less than 16 pixels in width or height.
**disposal**
Indicates the way in which the graphic is to be treated after being displayed.
* 0 - No disposal specified.
* 1 - Do not dispose.
* 2 - Restore to background color.
* 3 - Restore to previous content.
Pass a single integer for a constant disposal, or a list or tuple
to set the disposal for each frame separately.
**palette**
Use the specified palette for the saved image. The palette should
be a bytes or bytearray object containing the palette entries in
RGBRGB... form. It should be no more than 768 bytes. Alternately,
the palette can be passed in as an
:py:class:`PIL.ImagePalette.ImagePalette` object.
**optimize**
If present and true, attempt to compress the palette by
eliminating unused colors. This is only useful if the palette can
be compressed to the next smaller power of 2 elements.
Note that if the image you are saving comes from an existing GIF, it may have
the following properties in its :py:attr:`~PIL.Image.Image.info` dictionary.
For these options, if you do not pass them in, they will default to
their :py:attr:`~PIL.Image.Image.info` values.
**transparency**
Transparency color index.
**duration**
The display duration of each frame of the multiframe gif, in
milliseconds. Pass a single integer for a constant duration, or a
list or tuple to set the duration for each frame separately.
**loop**
Integer number of times the GIF should loop. 0 means that it will loop
forever. By default, the image will not loop.
**comment**
A comment about the image.
Reading local images
~~~~~~~~~~~~~~~~~~~~
The GIF loader creates an image memory the same size as the GIF fileâs *logical
screen size*, and pastes the actual pixel data (the *local image*) into this
image. If you only want the actual pixel rectangle, you can manipulate the
:py:attr:`~PIL.Image.Image.size` and :py:attr:`~PIL.Image.Image.tile`
attributes before loading the file::
im = Image.open(...)
if im.tile[0][0] == "gif":
# only read the first "local image" from this GIF file
tag, (x0, y0, x1, y1), offset, extra = im.tile[0]
im.size = (x1 - x0, y1 - y0)
im.tile = [(tag, (0, 0) + im.size, offset, extra)]
ICNS
^^^^
PIL reads and (macOS only) writes macOS ``.icns`` files. By default, the
largest available icon is read, though you can override this by setting the
:py:attr:`~PIL.Image.Image.size` property before calling
:py:meth:`~PIL.Image.Image.load`. The :py:meth:`~PIL.Image.Image.open` method
sets the following :py:attr:`~PIL.Image.Image.info` property:
**sizes**
A list of supported sizes found in this icon file; these are a
3-tuple, ``(width, height, scale)``, where ``scale`` is 2 for a retina
icon and 1 for a standard icon. You *are* permitted to use this 3-tuple
format for the :py:attr:`~PIL.Image.Image.size` property if you set it
before calling :py:meth:`~PIL.Image.Image.load`; after loading, the size
will be reset to a 2-tuple containing pixel dimensions (so, e.g. if you
ask for ``(512, 512, 2)``, the final value of
:py:attr:`~PIL.Image.Image.size` will be ``(1024, 1024)``).
The :py:meth:`~PIL.Image.Image.save` method can take the following keyword arguments:
**append_images**
A list of images to replace the scaled down versions of the image.
The order of the images does not matter, as their use is determined by
the size of each image.
.. versionadded:: 5.1.0
ICO
^^^
ICO is used to store icons on Windows. The largest available icon is read.
The :py:meth:`~PIL.Image.Image.save` method supports the following options:
**sizes**
A list of sizes including in this ico file; these are a 2-tuple,
``(width, height)``; Default to ``[(16, 16), (24, 24), (32, 32), (48, 48),
(64, 64), (128, 128), (256, 256)]``. Any sizes bigger than the original
size or 256 will be ignored.
IM
^^
IM is a format used by LabEye and other applications based on the IFUNC image
processing library. The library reads and writes most uncompressed interchange
versions of this format.
IM is the only format that can store all internal PIL formats.
JPEG
^^^^
PIL reads JPEG, JFIF, and Adobe JPEG files containing ``L``, ``RGB``, or
``CMYK`` data. It writes standard and progressive JFIF files.
Using the :py:meth:`~PIL.Image.Image.draft` method, you can speed things up by
converting ``RGB`` images to ``L``, and resize images to 1/2, 1/4 or 1/8 of
their original size while loading them.
The :py:meth:`~PIL.Image.Image.open` method may set the following
:py:attr:`~PIL.Image.Image.info` properties if available:
**jfif**
JFIF application marker found. If the file is not a JFIF file, this key is
not present.
**jfif_version**
A tuple representing the jfif version, (major version, minor version).
**jfif_density**
A tuple representing the pixel density of the image, in units specified
by jfif_unit.
**jfif_unit**
Units for the jfif_density:
* 0 - No Units
* 1 - Pixels per Inch
* 2 - Pixels per Centimeter
**dpi**
A tuple representing the reported pixel density in pixels per inch, if
the file is a jfif file and the units are in inches.
**adobe**
Adobe application marker found. If the file is not an Adobe JPEG file, this
key is not present.
**adobe_transform**
Vendor Specific Tag.
**progression**
Indicates that this is a progressive JPEG file.
**icc_profile**
The ICC color profile for the image.
**exif**
Raw EXIF data from the image.
The :py:meth:`~PIL.Image.Image.save` method supports the following options:
**quality**
The image quality, on a scale from 1 (worst) to 95 (best). The default is
75. Values above 95 should be avoided; 100 disables portions of the JPEG
compression algorithm, and results in large files with hardly any gain in
image quality.
**optimize**
If present and true, indicates that the encoder should make an extra pass
over the image in order to select optimal encoder settings.
**progressive**
If present and true, indicates that this image should be stored as a
progressive JPEG file.
**dpi**
A tuple of integers representing the pixel density, ``(x,y)``.
**icc_profile**
If present and true, the image is stored with the provided ICC profile.
If this parameter is not provided, the image will be saved with no profile
attached. To preserve the existing profile::
im.save(filename, 'jpeg', icc_profile=im.info.get('icc_profile'))
**exif**
If present, the image will be stored with the provided raw EXIF data.
**subsampling**
If present, sets the subsampling for the encoder.
* ``keep``: Only valid for JPEG files, will retain the original image setting.
* ``4:4:4``, ``4:2:2``, ``4:2:0``: Specific sampling values
* ``-1``: equivalent to ``keep``
* ``0``: equivalent to ``4:4:4``
* ``1``: equivalent to ``4:2:2``
* ``2``: equivalent to ``4:2:0``
**qtables**
If present, sets the qtables for the encoder. This is listed as an
advanced option for wizards in the JPEG documentation. Use with
caution. ``qtables`` can be one of several types of values:
* a string, naming a preset, e.g. ``keep``, ``web_low``, or ``web_high``
* a list, tuple, or dictionary (with integer keys =
range(len(keys))) of lists of 64 integers. There must be
between 2 and 4 tables.
.. versionadded:: 2.5.0
.. note::
To enable JPEG support, you need to build and install the IJG JPEG library
before building the Python Imaging Library. See the distribution README for
details.
JPEG 2000
^^^^^^^^^
.. versionadded:: 2.4.0
PIL reads and writes JPEG 2000 files containing ``L``, ``LA``, ``RGB`` or
``RGBA`` data. It can also read files containing ``YCbCr`` data, which it
converts on read into ``RGB`` or ``RGBA`` depending on whether or not there is
an alpha channel. PIL supports JPEG 2000 raw codestreams (``.j2k`` files), as
well as boxed JPEG 2000 files (``.j2p`` or ``.jpx`` files). PIL does *not*
support files whose components have different sampling frequencies.
When loading, if you set the ``mode`` on the image prior to the
:py:meth:`~PIL.Image.Image.load` method being invoked, you can ask PIL to
convert the image to either ``RGB`` or ``RGBA`` rather than choosing for
itself. It is also possible to set ``reduce`` to the number of resolutions to
discard (each one reduces the size of the resulting image by a factor of 2),
and ``layers`` to specify the number of quality layers to load.
The :py:meth:`~PIL.Image.Image.save` method supports the following options:
**offset**
The image offset, as a tuple of integers, e.g. (16, 16)
**tile_offset**
The tile offset, again as a 2-tuple of integers.
**tile_size**
The tile size as a 2-tuple. If not specified, or if set to None, the
image will be saved without tiling.
**quality_mode**
Either `"rates"` or `"dB"` depending on the units you want to use to
specify image quality.
**quality_layers**
A sequence of numbers, each of which represents either an approximate size
reduction (if quality mode is `"rates"`) or a signal to noise ratio value
in decibels. If not specified, defaults to a single layer of full quality.
**num_resolutions**
The number of different image resolutions to be stored (which corresponds
to the number of Discrete Wavelet Transform decompositions plus one).
**codeblock_size**
The code-block size as a 2-tuple. Minimum size is 4 x 4, maximum is 1024 x
1024, with the additional restriction that no code-block may have more
than 4096 coefficients (i.e. the product of the two numbers must be no
greater than 4096).
**precinct_size**
The precinct size as a 2-tuple. Must be a power of two along both axes,
and must be greater than the code-block size.
**irreversible**
If ``True``, use the lossy Irreversible Color Transformation
followed by DWT 9-7. Defaults to ``False``, which means to use the
Reversible Color Transformation with DWT 5-3.
**progression**
Controls the progression order; must be one of ``"LRCP"``, ``"RLCP"``,
``"RPCL"``, ``"PCRL"``, ``"CPRL"``. The letters stand for Component,
Position, Resolution and Layer respectively and control the order of
encoding, the idea being that e.g. an image encoded using LRCP mode can
have its quality layers decoded as they arrive at the decoder, while one
encoded using RLCP mode will have increasing resolutions decoded as they
arrive, and so on.
**cinema_mode**
Set the encoder to produce output compliant with the digital cinema
specifications. The options here are ``"no"`` (the default),
``"cinema2k-24"`` for 24fps 2K, ``"cinema2k-48"`` for 48fps 2K, and
``"cinema4k-24"`` for 24fps 4K. Note that for compliant 2K files,
*at least one* of your image dimensions must match 2048 x 1080, while
for compliant 4K files, *at least one* of the dimensions must match
4096 x 2160.
.. note::
To enable JPEG 2000 support, you need to build and install the OpenJPEG
library, version 2.0.0 or higher, before building the Python Imaging
Library.
Windows users can install the OpenJPEG binaries available on the
OpenJPEG website, but must add them to their PATH in order to use PIL (if
you fail to do this, you will get errors about not being able to load the
``_imaging`` DLL).
MSP
^^^
PIL identifies and reads MSP files from Windows 1 and 2. The library writes
uncompressed (Windows 1) versions of this format.
PCX
^^^
PIL reads and writes PCX files containing ``1``, ``L``, ``P``, or ``RGB`` data.
PNG
^^^
PIL identifies, reads, and writes PNG files containing ``1``, ``L``, ``P``,
``RGB``, or ``RGBA`` data. Interlaced files are supported as of v1.1.7.
The :py:meth:`~PIL.Image.Image.open` method sets the following
:py:attr:`~PIL.Image.Image.info` properties, when appropriate:
**chromaticity**
The chromaticity points, as an 8 tuple of floats. (``White Point
X``, ``White Point Y``, ``Red X``, ``Red Y``, ``Green X``, ``Green
Y``, ``Blue X``, ``Blue Y``)
**gamma**
Gamma, given as a floating point number.
**srgb**
The sRGB rendering intent as an integer.
* 0 Perceptual
* 1 Relative Colorimetric
* 2 Saturation
* 3 Absolute Colorimetric
**transparency**
For ``P`` images: Either the palette index for full transparent pixels,
or a byte string with alpha values for each palette entry.
For ``L`` and ``RGB`` images, the color that represents full transparent
pixels in this image.
This key is omitted if the image is not a transparent palette image.
``Open`` also sets ``Image.text`` to a dictionary of the values of the
``tEXt``, ``zTXt``, and ``iTXt`` chunks of the PNG image. Individual
compressed chunks are limited to a decompressed size of
``PngImagePlugin.MAX_TEXT_CHUNK``, by default 1MB, to prevent
decompression bombs. Additionally, the total size of all of the text
chunks is limited to ``PngImagePlugin.MAX_TEXT_MEMORY``, defaulting to
64MB.
The :py:meth:`~PIL.Image.Image.save` method supports the following options:
**optimize**
If present and true, instructs the PNG writer to make the output file as
small as possible. This includes extra processing in order to find optimal
encoder settings.
**transparency**
For ``P``, ``L``, and ``RGB`` images, this option controls what
color image to mark as transparent.
For ``P`` images, this can be a either the palette index,
or a byte string with alpha values for each palette entry.
**dpi**
A tuple of two numbers corresponding to the desired dpi in each direction.
**pnginfo**
A :py:class:`PIL.PngImagePlugin.PngInfo` instance containing text tags.
**compress_level**
ZLIB compression level, a number between 0 and 9: 1 gives best speed,
9 gives best compression, 0 gives no compression at all. Default is 6.
When ``optimize`` option is True ``compress_level`` has no effect
(it is set to 9 regardless of a value passed).
**icc_profile**
The ICC Profile to include in the saved file.
**bits (experimental)**
For ``P`` images, this option controls how many bits to store. If omitted,
the PNG writer uses 8 bits (256 colors).
**dictionary (experimental)**
Set the ZLIB encoder dictionary.
.. note::
To enable PNG support, you need to build and install the ZLIB compression
library before building the Python Imaging Library. See the `installation
documentation <../installation.html>`_ for details.
PPM
^^^
PIL reads and writes PBM, PGM and PPM files containing ``1``, ``L`` or ``RGB``
data.
SGI
^^^
Pillow reads and writes uncompressed ``L``, ``RGB``, and ``RGBA`` files.
SPIDER
^^^^^^
PIL reads and writes SPIDER image files of 32-bit floating point data
("F;32F").
PIL also reads SPIDER stack files containing sequences of SPIDER images. The
:py:meth:`~file.seek` and :py:meth:`~file.tell` methods are supported, and
random access is allowed.
The :py:meth:`~PIL.Image.Image.open` method sets the following attributes:
**format**
Set to ``SPIDER``
**istack**
Set to 1 if the file is an image stack, else 0.
**nimages**
Set to the number of images in the stack.
A convenience method, :py:meth:`~PIL.Image.Image.convert2byte`, is provided for
converting floating point data to byte data (mode ``L``)::
im = Image.open('image001.spi').convert2byte()
Writing files in SPIDER format
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The extension of SPIDER files may be any 3 alphanumeric characters. Therefore
the output format must be specified explicitly::
im.save('newimage.spi', format='SPIDER')
For more information about the SPIDER image processing package, see the
`SPIDER homepage`_ at `Wadsworth Center`_.
.. _SPIDER homepage: https://spider.wadsworth.org/spider_doc/spider/docs/spider.html
.. _Wadsworth Center: https://www.wadsworth.org/
TGA
^^^
PIL reads and writes TGA images containing ``L``, ``LA``, ``P``,
``RGB``, and ``RGBA`` data. PIL can read and write both uncompressed and
run-length encoded TGAs.
TIFF
^^^^
Pillow reads and writes TIFF files. It can read both striped and tiled
images, pixel and plane interleaved multi-band images. If you have
libtiff and its headers installed, PIL can read and write many kinds
of compressed TIFF files. If not, PIL will only read and write
uncompressed files.
.. note::
Beginning in version 5.0.0, Pillow requires libtiff to read or
write compressed files. Prior to that release, Pillow had buggy
support for reading Packbits, LZW and JPEG compressed TIFFs
without using libtiff.
The :py:meth:`~PIL.Image.Image.open` method sets the following
:py:attr:`~PIL.Image.Image.info` properties:
**compression**
Compression mode.
.. versionadded:: 2.0.0
**dpi**
Image resolution as an ``(xdpi, ydpi)`` tuple, where applicable. You can use
the :py:attr:`~PIL.Image.Image.tag` attribute to get more detailed
information about the image resolution.
.. versionadded:: 1.1.5
**resolution**
Image resolution as an ``(xres, yres)`` tuple, where applicable. This is a
measurement in whichever unit is specified by the file.
.. versionadded:: 1.1.5
The :py:attr:`~PIL.Image.Image.tag_v2` attribute contains a dictionary
of TIFF metadata. The keys are numerical indexes from
:py:attr:`~PIL.TiffTags.TAGS_V2`. Values are strings or numbers for single
items, multiple values are returned in a tuple of values. Rational
numbers are returned as a :py:class:`~PIL.TiffImagePlugin.IFDRational`
object.
.. versionadded:: 3.0.0
For compatibility with legacy code, the
:py:attr:`~PIL.Image.Image.tag` attribute contains a dictionary of
decoded TIFF fields as returned prior to version 3.0.0. Values are
returned as either strings or tuples of numeric values. Rational
numbers are returned as a tuple of ``(numerator, denominator)``.
.. deprecated:: 3.0.0
Saving Tiff Images
~~~~~~~~~~~~~~~~~~
The :py:meth:`~PIL.Image.Image.save` method can take the following keyword arguments:
**save_all**
If true, Pillow will save all frames of the image to a multiframe tiff document.
.. versionadded:: 3.4.0
**append_images**
A list of images to append as additional frames. Each of the
images in the list can be single or multiframe images. Note however, that for
correct results, all the appended images should have the same
``encoderinfo`` and ``encoderconfig`` properties.
.. versionadded:: 4.2.0
**tiffinfo**
A :py:class:`~PIL.TiffImagePlugin.ImageFileDirectory_v2` object or dict
object containing tiff tags and values. The TIFF field type is
autodetected for Numeric and string values, any other types
require using an :py:class:`~PIL.TiffImagePlugin.ImageFileDirectory_v2`
object and setting the type in
:py:attr:`~PIL.TiffImagePlugin.ImageFileDirectory_v2.tagtype` with
the appropriate numerical value from
``TiffTags.TYPES``.
.. versionadded:: 2.3.0
Metadata values that are of the rational type should be passed in
using a :py:class:`~PIL.TiffImagePlugin.IFDRational` object.
.. versionadded:: 3.1.0
For compatibility with legacy code, a
:py:class:`~PIL.TiffImagePlugin.ImageFileDirectory_v1` object may
be passed in this field. However, this is deprecated.
.. versionadded:: 3.0.0
.. note::
Only some tags are currently supported when writing using
libtiff. The supported list is found in
:py:attr:`~PIL:TiffTags.LIBTIFF_CORE`.
**compression**
A string containing the desired compression method for the
file. (valid only with libtiff installed) Valid compression
methods are: ``None``, ``"tiff_ccitt"``, ``"group3"``,
``"group4"``, ``"tiff_jpeg"``, ``"tiff_adobe_deflate"``,
``"tiff_thunderscan"``, ``"tiff_deflate"``, ``"tiff_sgilog"``,
``"tiff_sgilog24"``, ``"tiff_raw_16"``
These arguments to set the tiff header fields are an alternative to
using the general tags available through tiffinfo.
**description**
**software**
**date_time**
**artist**
**copyright**
Strings
**resolution_unit**
A string of "inch", "centimeter" or "cm"
**resolution**
**x_resolution**
**y_resolution**
**dpi**
Either a Float, 2 tuple of (numerator, denominator) or a
:py:class:`~PIL.TiffImagePlugin.IFDRational`. Resolution implies
an equal x and y resolution, dpi also implies a unit of inches.
WebP
^^^^
PIL reads and writes WebP files. The specifics of PIL's capabilities with this
format are currently undocumented.
The :py:meth:`~PIL.Image.Image.save` method supports the following options:
**lossless**
If present and true, instructs the WebP writer to use lossless compression.
**quality**
Integer, 1-100, Defaults to 80. For lossy, 0 gives the smallest
size and 100 the largest. For lossless, this parameter is the amount
of effort put into the compression: 0 is the fastest, but gives larger
files compared to the slowest, but best, 100.
**method**
Quality/speed trade-off (0=fast, 6=slower-better). Defaults to 0.
**icc_procfile**
The ICC Profile to include in the saved file. Only supported if
the system WebP library was built with webpmux support.
**exif**
The exif data to include in the saved file. Only supported if
the system WebP library was built with webpmux support.
Saving sequences
~~~~~~~~~~~~~~~~~
.. note::
Support for animated WebP files will only be enabled if the system WebP
library is v0.5.0 or later. You can check webp animation support at
runtime by calling `features.check("webp_anim")`.
When calling :py:meth:`~PIL.Image.Image.save`, the following options
are available when the `save_all` argument is present and true.
**append_images**
A list of images to append as additional frames. Each of the
images in the list can be single or multiframe images.
**duration**
The display duration of each frame, in milliseconds. Pass a single
integer for a constant duration, or a list or tuple to set the
duration for each frame separately.
**loop**
Number of times to repeat the animation. Defaults to [0 = infinite].
**background**
Background color of the canvas, as an RGBA tuple with values in
the range of (0-255).
**minimize_size**
If true, minimize the output size (slow). Implicitly disables
key-frame insertion.
**kmin, kmax**
Minimum and maximum distance between consecutive key frames in
the output. The library may insert some key frames as needed
to satisfy this criteria. Note that these conditions should
hold: kmax > kmin and kmin >= kmax / 2 + 1. Also, if kmax <= 0,
then key-frame insertion is disabled; and if kmax == 1, then all
frames will be key-frames (kmin value does not matter for these
special cases).
**allow_mixed**
If true, use mixed compression mode; the encoder heuristically
chooses between lossy and lossless for each frame.
XBM
^^^
PIL reads and writes X bitmap files (mode ``1``).
Read-only formats
-----------------
BLP
^^^
BLP is the Blizzard Mipmap Format, a texture format used in World of
Warcraft. Pillow supports reading ``JPEG`` Compressed or raw ``BLP1``
images, and all types of ``BLP2`` images.
CUR
^^^
CUR is used to store cursors on Windows. The CUR decoder reads the largest
available cursor. Animated cursors are not supported.
DCX
^^^
DCX is a container file format for PCX files, defined by Intel. The DCX format
is commonly used in fax applications. The DCX decoder can read files containing
``1``, ``L``, ``P``, or ``RGB`` data.
When the file is opened, only the first image is read. You can use
:py:meth:`~file.seek` or :py:mod:`~PIL.ImageSequence` to read other images.
DDS
^^^
DDS is a popular container texture format used in video games and natively
supported by DirectX.
Currently, DXT1, DXT3, and DXT5 pixel formats are supported and only in ``RGBA``
mode.
.. versionadded:: 3.4.0 DXT3
FLI, FLC
^^^^^^^^
PIL reads Autodesk FLI and FLC animations.
The :py:meth:`~PIL.Image.Image.open` method sets the following
:py:attr:`~PIL.Image.Image.info` properties:
**duration**
The delay (in milliseconds) between each frame.
FPX
^^^
PIL reads Kodak FlashPix files. In the current version, only the highest
resolution image is read from the file, and the viewing transform is not taken
into account.
.. note::
To enable full FlashPix support, you need to build and install the IJG JPEG
library before building the Python Imaging Library. See the distribution
README for details.
FTEX
^^^^
.. versionadded:: 3.2.0
The FTEX decoder reads textures used for 3D objects in
Independence War 2: Edge Of Chaos. The plugin reads a single texture
per file, in the compressed and uncompressed formats.
GBR
^^^
The GBR decoder reads GIMP brush files, version 1 and 2.
The :py:meth:`~PIL.Image.Image.open` method sets the following
:py:attr:`~PIL.Image.Image.info` properties:
**comment**
The brush name.
**spacing**
The spacing between the brushes, in pixels. Version 2 only.
GD
^^
PIL reads uncompressed GD2 files. Note that you must use
:py:func:`PIL.GdImageFile.open` to read such a file.
The :py:meth:`~PIL.Image.Image.open` method sets the following
:py:attr:`~PIL.Image.Image.info` properties:
**transparency**
Transparency color index. This key is omitted if the image is not
transparent.
IMT
^^^
PIL reads Image Tools images containing ``L`` data.
IPTC/NAA
^^^^^^^^
PIL provides limited read support for IPTC/NAA newsphoto files.
MCIDAS
^^^^^^
PIL identifies and reads 8-bit McIdas area files.
MIC
^^^
PIL identifies and reads Microsoft Image Composer (MIC) files. When opened, the
first sprite in the file is loaded. You can use :py:meth:`~file.seek` and
:py:meth:`~file.tell` to read other sprites from the file.
Note that there may be an embedded gamma of 2.2 in MIC files.
MPO
^^^
Pillow identifies and reads Multi Picture Object (MPO) files, loading the primary
image when first opened. The :py:meth:`~file.seek` and :py:meth:`~file.tell`
methods may be used to read other pictures from the file. The pictures are
zero-indexed and random access is supported.
PCD
^^^
PIL reads PhotoCD files containing ``RGB`` data. This only reads the 768x512
resolution image from the file. Higher resolutions are encoded in a proprietary
encoding.
PIXAR
^^^^^
PIL provides limited support for PIXAR raster files. The library can identify
and read âdumpedâ RGB files.
The format code is ``PIXAR``.
PSD
^^^
PIL identifies and reads PSD files written by Adobe Photoshop 2.5 and 3.0.
WAL
^^^
.. versionadded:: 1.1.4
PIL reads Quake2 WAL texture files.
Note that this file format cannot be automatically identified, so you must use
the open function in the :py:mod:`~PIL.WalImageFile` module to read files in
this format.
By default, a Quake2 standard palette is attached to the texture. To override
the palette, use the putpalette method.
XPM
^^^
PIL reads X pixmap files (mode ``P``) with 256 colors or less.
The :py:meth:`~PIL.Image.Image.open` method sets the following
:py:attr:`~PIL.Image.Image.info` properties:
**transparency**
Transparency color index. This key is omitted if the image is not
transparent.
Write-only formats
------------------
PALM
^^^^
PIL provides write-only support for PALM pixmap files.
The format code is ``Palm``, the extension is ``.palm``.
PDF
^^^
PIL can write PDF (Acrobat) images. Such images are written as binary PDF 1.4
files, using either JPEG or HEX encoding depending on the image mode (and
whether JPEG support is available or not).
The :py:meth:`~PIL.Image.Image.save` method can take the following keyword arguments:
**save_all**
If a multiframe image is used, by default, only the first image will be saved.
To save all frames, each frame to a separate page of the PDF, the ``save_all``
parameter must be present and set to ``True``.
.. versionadded:: 3.0.0
**append_images**
A list of images to append as additional pages. Each of the
images in the list can be single or multiframe images.
.. versionadded:: 4.2.0
**append**
Set to True to append pages to an existing PDF file. If the file doesn't
exist, an :py:exc:`IOError` will be raised.
.. versionadded:: 5.1.0
**resolution**
Image resolution in DPI. This, together with the number of pixels in the
image, will determine the physical dimensions of the page that will be
saved in the PDF.
**title**
The documentâs title. If not appending to an existing PDF file, this will
default to the filename.
.. versionadded:: 5.1.0
**author**
The name of the person who created the document.
.. versionadded:: 5.1.0
**subject**
The subject of the document.
.. versionadded:: 5.1.0
**keywords**
Keywords associated with the document.
.. versionadded:: 5.1.0
**creator**
If the document was converted to PDF from another format, the name of the
conforming product that created the original document from which it was
converted.
.. versionadded:: 5.1.0
**producer**
If the document was converted to PDF from another format, the name of the
conforming product that converted it to PDF.
.. versionadded:: 5.1.0
**creationDate**
The creation date of the document. If not appending to an existing PDF
file, this will default to the current time.
.. versionadded:: 5.3.0
**modDate**
The modification date of the document. If not appending to an existing PDF
file, this will default to the current time.
.. versionadded:: 5.3.0
XV Thumbnails
^^^^^^^^^^^^^
PIL can read XV thumbnail files.
Identify-only formats
---------------------
BUFR
^^^^
.. versionadded:: 1.1.3
PIL provides a stub driver for BUFR files.
To add read or write support to your application, use
:py:func:`PIL.BufrStubImagePlugin.register_handler`.
FITS
^^^^
.. versionadded:: 1.1.5
PIL provides a stub driver for FITS files.
To add read or write support to your application, use
:py:func:`PIL.FitsStubImagePlugin.register_handler`.
GRIB
^^^^
.. versionadded:: 1.1.5
PIL provides a stub driver for GRIB files.
The driver requires the file to start with a GRIB header. If you have files
with embedded GRIB data, or files with multiple GRIB fields, your application
has to seek to the header before passing the file handle to PIL.
To add read or write support to your application, use
:py:func:`PIL.GribStubImagePlugin.register_handler`.
HDF5
^^^^
.. versionadded:: 1.1.5
PIL provides a stub driver for HDF5 files.
To add read or write support to your application, use
:py:func:`PIL.Hdf5StubImagePlugin.register_handler`.
MPEG
^^^^
PIL identifies MPEG files.
WMF
^^^
PIL can identify playable WMF files.
In PIL 1.1.4 and earlier, the WMF driver provides some limited rendering
support, but not enough to be useful for any real application.
In PIL 1.1.5 and later, the WMF driver is a stub driver. To add WMF read or
write support to your application, use
:py:func:`PIL.WmfImagePlugin.register_handler` to register a WMF handler.
::
from PIL import Image
from PIL import WmfImagePlugin
class WmfHandler:
def open(self, im):
...
def load(self, im):
...
return image
def save(self, im, fp, filename):
...
wmf_handler = WmfHandler()
WmfImagePlugin.register_handler(wmf_handler)
im = Image.open("sample.wmf")
