#
# Sun Integrated Lights Out Management card
#
# Verified on:
#   Sunfire X4140 SP firmware 2.0.2.3 build 29049, SP file system 0.1.16
#   Sunfire X4550 SP firmware 2.0.2.5 build 32394, SP file system 0.1.16
#
# Examples:
#   over SER MGT RJ-45 (serial via cyclades)
#     device "ilom" "ilom" "usr-ts:7016"
#   over SER MGT RJ-45 (direct serial)
#     device "ilom" "ilom" "/dev/ttyS1" "9600,8n1"
#   over NET MGT RJ-45 (network over ssh)
#     device "ilom" "ilom" "ssh -o StrictHostKeyChecking=no -lroot sol|&"
#
specification  "ilom" {
	timeout 	10

	plug name { "1" }

	# login script handles three cases:
	# 1) serial port, already logged in
	# 2) serial port, not logged in
	# 3) ssh, enter password only
	script login {
		send "\n"
 		expect "->|Password:|login: "
		send "root\n"
		expect "->|Password: "
		send "changeme\n"
		expect "->"
	}
	script status {
		send "show -d properties /SYS\n"
		expect "(POWERSTATE|power_state)[^Oo]+(On|Off|on|off)"
		setplugstate "1" $2 on="On|on" off="Off|off"
		expect "->"
	}
	script on {
		send "start -script /SYS\n"
		expect "->"
	}		
	script off {
		send "stop -script -force /SYS\n"
		expect "->"
	}		
	script cycle {
		send "stop -script -force /SYS\n"
		expect "->"
		delay 4	
		send "start -script /SYS\n"
		expect "->"
	}
	script reset {
		send "reset -script /SYS\n"
		expect "->"
	}
}