Sophie

Sophie

distrib > Mageia > 7 > armv7hl > media > core-updates > by-pkgid > 1b8197bd21e5871a2eef95e654631b3a > files > 10

xen-4.12.1-1.mga7.armv7hl.rpm

#!/usr/bin/bash

dir=$(dirname "$0")
. "$dir/block-common.sh"

expand_dev() {
  local dev
  case $1 in
  /*)
    dev=$1
    ;;
  *)
    dev=/dev/$1
    ;;
  esac
  echo -n $dev
}

find_free_loopback_helper() {
  local next_devnum=0
  local busy_devnum
  while read busy_devnum; do
    if [ "$next_devnum" != "$busy_devnum" ]; then
      break
    fi
    let next_devnum=$next_devnum+1
  done
  echo "/dev/loop${next_devnum}"
}

# Not all distros have "losetup -f"
find_free_loopback_dev() {
  local loopdev
  loopdev=$(losetup -a | sed -e 's+^/dev/loop++' -e 's/:.*//' | find_free_loopback_helper)
  if [ -n "$loopdev" ] && [ -b "$loopdev" ]; then
    echo "$loopdev"
  fi
}

##
# check_sharing devtype device mode [inode]
#
# Check whether the device requested is already in use.  To use the device in
# read-only mode, it may be in use in read-only mode, but may not be in use in
# read-write anywhere at all.  To use the device in read-write mode, it must
# not be in use anywhere at all.
#
# Prints one of
#
#    'local $d': the device ($d) may not be used because it is mounted in the
#                current (i.e. the privileged domain) in a way incompatible
#                with the requested mode;
#    'guest $d': the device may not be used because it is already mounted
#                through device $d by a guest in a way incompatible with the
#                requested mode; or
#    'ok':       the device may be used.
#
check_sharing()
{
  local devtype=$1
  local dev="$2"
  local mode="$3"
  local devmm=","

  if [ "$devtype" = "file" ];
  then
    local inode="$4"

    shared_list=$(losetup -a |
          sed -n -e "s@^\([^:]\+\)\(:[[:blank:]]\[0*${dev}\]:${inode}[[:blank:]](.*)\)@\1@p" )
    for dev in $shared_list
    do
      if [ -n "$dev" ]
      then
        devmm="${devmm}$(device_major_minor $dev),"
      fi
    done
    # if $devmm is unchanged, file being checked is not a shared loopback device
    if [ "$devmm" = "," ];
    then
      echo 'ok'
      return
    fi
  else
    devmm=${devmm}$(device_major_minor "$dev")","
  fi

  local file

  if [ "$mode" = 'w' ]
  then
    toskip="^$"
  else
    toskip="^[^ ]* [^ ]* [^ ]* ro[, ]"
  fi

  for file in $(cat /proc/mounts | grep -v "$toskip" | cut -f 1 -d ' ')
  do
    if [ -e "$file" ]
    then
      local d=$(device_major_minor "$file")

      # checking for $d in $devmm is best through the [[...]] bashism
      if [[ "$devmm" == *",$d,"* ]]
      then
        echo "local $d"
        return
      fi
    fi
  done

  local base_path="$XENBUS_BASE_PATH/$XENBUS_TYPE"
  for dom in $(xenstore-list "$base_path")
  do
    for dev in $(xenstore-list "$base_path/$dom")
    do
      d=$(xenstore_read_default "$base_path/$dom/$dev/physical-device" "")

      # checking for $d in $devmm is best through the [[...]] bashism
      if [ -n "$d" ] && [[ "$devmm" == *",$d,"* ]]
      then
        if [ "$mode" = 'w' ]
        then
          if ! same_vm $dom
          then
            echo "guest $d"
            return
          fi
        else
          local m=$(xenstore_read_default "$base_path/$dom/$dev/mode" "")
          m=$(canonicalise_mode "$m")

          if [ "$m" = 'w' ]
          then
            if ! same_vm $dom
            then
              echo "guest $d"
              return
            fi
          fi
        fi
      fi
    done
  done

  echo 'ok'
}


##
# check_device_sharing dev mode
#
# Perform the sharing check for the given physical device and mode.
#
check_device_sharing()
{
  local dev="$1"
  local mode=$(canonicalise_mode "$2")
  local type="device"
  local result

  if [ "x$mode" = 'x!' ]
  then
    return 0
  fi

  result=$(check_sharing "$type" "$dev" "$mode")

  if [ "$result" != 'ok' ]
  then
    do_ebusy "Device $dev is mounted " "$mode" "${result%% *}"
  fi
}


##
# check_device_sharing file dev mode inode
#
# Perform the sharing check for the given file, with its corresponding
# device, inode and mode. As the file can be mounted multiple times,
# the inode is passed through to check_sharing for all instances to be
# checked.
#
check_file_sharing()
{
  local file="$1"
  local dev="$2"
  local mode="$3"
  local inode="$4"
  local type="file"
  local result

  result=$(check_sharing "$type" "$dev" "$mode" "$inode")

  if [ "$result" != 'ok' ]
  then
    do_ebusy "File $file is loopback-mounted through ${result#* },
which is mounted " "$mode" "${result%% *}"
  fi
}


##
# do_ebusy prefix mode result
#
# Helper function for check_device_sharing check_file_sharing, calling ebusy
# with an error message constructed from the given prefix, mode, and result
# from a call to check_sharing.
#
do_ebusy()
{
  local prefix="$1"
  local mode="$2"
  local result="$3"

  if [ "$result" = 'guest' ]
  then
    dom='a guest '
    when='now'
  else
    dom='the privileged '
    when='by a guest'
  fi

  if [ "$mode" = 'w' ]
  then
    m1=''
    m2=''
  else
    m1='read-write '
    m2='read-only '
  fi

  release_lock "block"
  ebusy \
"${prefix}${m1}in ${dom}domain,
and so cannot be mounted ${m2}${when}."
}


t=$(xenstore_read_default "$XENBUS_PATH/type" 'MISSING')
p=$(xenstore_read "$XENBUS_PATH/params")
mode=$(xenstore_read "$XENBUS_PATH/mode")
if [ -b "$p" ]; then
    truetype="phy"
elif [ -f "$p" ]; then
    truetype="file"
fi

case "$command" in
  add)
    phys=$(xenstore_read_default "$XENBUS_PATH/physical-device" 'MISSING')
    if [ "$phys" != 'MISSING' ]
    then
      # Depending upon the hotplug configuration, it is possible for this
      # script to be called twice, so just bail.
      exit 0
    fi

    FRONTEND_ID=$(xenstore_read "$XENBUS_PATH/frontend-id")
    FRONTEND_UUID=$(xenstore_read_default \
            "/local/domain/$FRONTEND_ID/vm" 'unknown')

    case $truetype in
      phy)
        dev=$(expand_dev $p)

        if [ -L "$dev" ]
        then
          dev=$(readlink -f "$dev") || fatal "$dev link does not exist."
        fi
        test -e "$dev" || fatal "$dev does not exist."
        test -b "$dev" || fatal "$dev is not a block device."

        claim_lock "block"
        check_device_sharing "$dev" "$mode"
	write_dev "$dev"
        release_lock "block"
	exit 0
	;;

      file)
        # Canonicalise the file, for sharing check comparison, and the mode
        # for ease of use here.
        file=$(readlink -f "$p") || fatal "$p does not exist."
        test -f "$file" || fatal "$file does not exist."
        mode=$(canonicalise_mode "$mode")

        claim_lock "block"

        # Avoid a race with the remove if the path has been deleted, or
	# otherwise changed from "InitWait" state e.g. due to a timeout
        xenbus_state=$(xenstore_read_default "$XENBUS_PATH/state" 'unknown')
        if [ "$xenbus_state" != '2' ]
        then
          release_lock "block"
          fatal "Path closed or removed during hotplug add: $XENBUS_PATH state: $xenbus_state"
        fi

        if [ "$mode" = 'w' ] && ! stat "$file" -c %A | grep -q w
        then
          release_lock "block"
          ebusy \
"File $file is read-only, and so I will not
mount it read-write in a guest domain."
        fi

        if [ "x$mode" != 'x!' ]
        then
          inode=$(stat -c '%i' "$file")
          dev=$(stat -c '%D' "$file")
          if [ -z "$inode" ] || [ -z "$dev" ]
          then
            fatal "Unable to lookup $file: dev: $dev inode: $inode"
          fi

          check_file_sharing "$file" "$dev" "$mode" "$inode"
        fi

        loopdev=$(losetup -f 2>/dev/null || find_free_loopback_dev)
        if [ "$loopdev" = '' ]
        then
          release_lock "block"
          fatal 'Failed to find an unused loop device'
        fi

        if LANG=C losetup -h 2>&1 | grep read-only >/dev/null
        then
          roflag="-$mode"; roflag="${roflag#-w}"; roflag="${roflag#-!}"
        else
          roflag=''
        fi
        do_or_die losetup $roflag "$loopdev" "$file"
        xenstore_write "$XENBUS_PATH/node" "$loopdev"
        write_dev "$loopdev"
        release_lock "block"
        exit 0
	;;

      "")
        claim_lock "block"
        success
        release_lock "block"
	;;
    esac
    ;;

  remove)
    case $truetype in
      phy)
	exit 0
	;;

      file)
        claim_lock "block"
        node=$(xenstore_read "$XENBUS_PATH/node")
	losetup -d "$node"
        release_lock "block"
	exit 0
	;;

      "")
        exit 0
	;;
    esac
    ;;

esac

# If we've reached here, $t is neither phy nor file, so fire a helper script.
[ -x ${XEN_SCRIPT_DIR}/block-"$t" ] && \
  ${XEN_SCRIPT_DIR}/block-"$t" "$command"