Installing The Add Address Plugin
=================================

1) Start with untaring the file into the plugins directory.
   Here is a example for the 1.0 version of the Add Address
   plugin.

  $ cd plugins
  $ tar -zxvf add_address-1.0-1.4.0.tar.gz

2) If you do not want to change the default behavior of this
   plugin, skip to step four.

3) (OPTIONAL) Decide if you want to store the plugin
   configuration file in the plugin directory or in the main
   SquirrelMail config directory.  

   A) To store the configuration file in the plugin directory,
      change into the add_address directory, copy
      config_example.php to config.php and edit config.php,
      making adjustments as you deem necessary.

     ----- optional -----
     $ cd add_address
     $ cp config_example.php config.php
     $ vi config.php
     ----- optional -----

   B) To store the configuration file in the main SquirrelMail
      config directory, change into the add_address directory,
      copy config_example.php to
      ../../config/config_add_address.php and edit
      ../../config/config_add_address.php, making
      adjustments as you deem necessary.

     ----- optional -----
     $ cd add_address
     $ cp config_example.php ../../config/config_add_address.php
     $ vi ../../config/config_add_address.php
     ----- optional -----

4) Then go to your config directory and run conf.pl.  Choose
   option 8 and move the plugin from the "Available Plugins"
   category to the "Installed Plugins" category.  Save and exit.

  $ cd ../../config/
  $ ./conf.pl

5) Also, if not being used with SquirrelMail 1.4.10+ or 1.5.2+,
   please verify that you have the "Compatibility" plugin
   installed (but not necessarily activated).

6) Translations are not included in this package.  To get a
   translation, download the language pack needed from:

      http://www.squirrelmail.org/download.php



Upgrading Add Address
=====================

1) Start with untaring the file into the plugins directory.
   Here is a example for the 1.0 version of the Add Address
   plugin.

  $ cd plugins
  $ tar -zxvf add_address-1.0-1.4.0.tar.gz

2) Change into the add_address directory and check your config.php
   file against the new version to see if there are any new
   settings that you must add to your config.php file.

  $ diff -u config.php config_example.php

   If you store your configuration file in the main SquirrelMail
   config directory, adjust this command as follows:

  $ diff -u ../../config/config_add_address.php config_example.php

   Or simply replace your configuration file with the provided
   example and reconfigure the plugin from scratch (see step three
   under the installation procedure above).