#global candidate rc0

# Binaries not used in standard manner so debuginfo is useless
%global debug_package %{nil}

%global rel 1

Name:    arm-trusted-firmware
Version: 2.8
Release: %mkrel %{rel}%{?candidate:.%{candidate}}
Summary: ARM Trusted Firmware
Group:   System/Kernel and hardware
License: BSD
URL:     https://github.com/ARM-software/arm-trusted-firmware/wiki
Source0: https://github.com/ARM-software/arm-trusted-firmware/archive/v%{version}%{?candidate:-%{candidate}}.tar.gz#/%{name}-%{version}%{?candidate:-%{candidate}}.tar.gz
Source1: aarch64-bl31
Patch0:  atf-2.8-fix-linking.patch

# At the moment we're only building on aarch64
ExclusiveArch: aarch64

BuildRequires: dtc
BuildRequires: gcc
# This is needed for rk3399 which while aarch64 has an onboard Cortex-M0 base PMU
BuildRequires: gcc-arm-linux-gnu

%description
ARM Trusted firmware is a reference implementation of secure world software for
ARMv8-A including Exception Level 3 (EL3) software. It provides a number of
standard ARM interfaces like Power State Coordination (PSCI), Trusted Board
Boot Requirements (TBBR) and Secure Monitor.

Note: the contents of this package are generally just consumed by bootloaders
such as u-boot. As such the binaries aren't of general interest to users.

%ifarch aarch64
%package     -n arm-trusted-firmware-armv8
Summary:     ARM Trusted Firmware for ARMv8-A

%description -n arm-trusted-firmware-armv8
ARM Trusted Firmware binaries for various  ARMv8-A SoCs.

Note: the contents of this package are generally just consumed by bootloaders
such as u-boot. As such the binaries aren't of general interest to users.
%endif

%prep
%autosetup -n %{name}-%{version}%{?candidate:-%{candidate}} -p1

cp %SOURCE1 .
# Fix the name of the cross compile for the rk3399 Cortex-M0 PMU
sed -i 's/arm-none-eabi-/arm-linux-gnu-/' plat/rockchip/rk3399/drivers/m0/Makefile

%build

%undefine _auto_set_build_flags

%ifarch aarch64
for soc in $(cat %{_arch}-bl31)
do
# At the moment we're only making the secure firmware (bl31)
make HOSTCC="gcc $RPM_OPT_FLAGS" CROSS_COMPILE="" PLAT=$(echo $soc) bl31
done
%endif


%install

mkdir -p %{buildroot}%{_datadir}/%{name}

%ifarch aarch64
# At the moment we just support adding bl31.bin
for soc in $(cat %{_arch}-bl31)
do
mkdir -p %{buildroot}%{_datadir}/%{name}/$(echo $soc)/
 for file in bl31.bin
 do
  if [ -f build/$(echo $soc)/release/$(echo $file) ]; then
    install -p -m 0644 build/$(echo $soc)/release/$(echo $file) /%{buildroot}%{_datadir}/%{name}/$(echo $soc)/
  fi
 done
done

# Rockchips wants the bl31.elf, plus rk3399 wants power management co-processor bits
for soc in rk3399 rk3368 rk3328
do
mkdir -p %{buildroot}%{_datadir}/%{name}/$(echo $soc)/
 for file in bl31/bl31.elf m0/rk3399m0.bin m0/rk3399m0.elf
 do
  if [ -f build/$(echo $soc)/release/$(echo $file) ]; then
    install -p -m 0644 build/$(echo $soc)/release/$(echo $file) /%{buildroot}%{_datadir}/%{name}/$(echo $soc)/
  fi
 done
done

%endif

%ifarch aarch64
%files -n arm-trusted-firmware-armv8
%license license.rst
%doc readme.rst
%{_datadir}/%{name}
%endif



%changelog
* Sat Mar 25 2023 pterjan <pterjan> 2.8-1.mga9
+ Revision: 1950338
- Add missing group
- Update to 2.8 and sync with Fedora
+ wally <wally>
- imported package arm-trusted-firmware based on .spec from Fedora