#
# Id: postgresql.conf,v 1.8.2.11 2003/07/15 11:15:43 pnixon Exp $
#
# Configuration for the SQL module, when using Postgresql.
#
# The database schema is available at:
#
# src/radiusd/src/modules/rlm_sql/drivers/rlm_sql_postgresql/db_postgresql.sql
#
sql {
# Database type
# Current supported are: rlm_sql_mysql, rlm_sql_postgresql, rlm_sql_iodbc, rlm_sql_oracle
driver = "rlm_sql_postgresql"
# Connect info
server = "localhost"
# The following credentials will most likely work on a default install of Postgresql
# If they do work however, it means that you have a HUGE GAPING SECURITY RISK on your
# server! Please change the "postgres" users password and setup a separate radius user.
login = "postgres"
password = ""
# Database table configuration
radius_db = "radius"
# If you want both stop and start records logged to the
# same SQL table, leave this as is. If you want them in
# different tables, put the start table in acct_table1
# and stop table in acct_table2
acct_table1 = "radacct"
acct_table2 = "radacct"
authcheck_table = "radcheck"
authreply_table = "radreply"
groupcheck_table = "radgroupcheck"
groupreply_table = "radgroupreply"
usergroup_table = "usergroup"
# Remove stale session if checkrad does not see a double login
deletestalesessions = yes
# Print all SQL statements when in debug mode (-x)
sqltrace = yes
sqltracefile = ${logdir}/sqltrace.sql
# number of sql connections to make to server
num_sql_socks = 5
#######################################################################
# Query config: Username
#######################################################################
# This is the username that will get substituted, escaped, and added
# as attribute 'SQL-User-Name'. '%{SQL-User-Name}' should be used below
# everywhere a username substitution is needed so you you can be sure
# the username passed from the client is escaped properly.
#
# Uncomment the next line, if you want the sql_user_name to mean:
#
# Use Stripped-User-Name, if it's there.
# Else use User-Name, if it's there,
# Else use hard-coded string "none" as the user name.
#
#sql_user_name = "%{Stripped-User-Name:-%{User-Name:-none}}"
#
sql_user_name = "%{User-Name}"
#######################################################################
# Authorization Queries
#######################################################################
# These queries compare the check items for the user
# in ${authcheck_table} and setup the reply items in
# ${authreply_table}. You can use any query/tables
# you want, but the return data for each row MUST
# be in the following order:
#
# 0. Row ID (currently unused)
# 1. UserName/GroupName
# 2. Item Attr Name
# 3. Item Attr Value
#######################################################################
# Use these for case sensitive usernames. WARNING: Slower queries!
#authorize_check_query = "SELECT id,UserName,Attribute,Value,Op FROM ${authcheck_table} WHERE STRCMP(Username, '%{SQL-User-Name}') = 0 ORDER BY id"
#authorize_reply_query = "SELECT id,UserName,Attribute,Value,Op FROM ${authreply_table} WHERE STRCMP(Username, '%{SQL-User-Name}') = 0 ORDER BY id"
authorize_check_query = "SELECT id, UserName, Attribute, Value, Op \
FROM ${authcheck_table} \
WHERE Username = '%{SQL-User-Name}' \
ORDER BY id"
authorize_reply_query = "SELECT id, UserName, Attribute, Value, Op \
FROM ${authreply_table} \
WHERE Username = '%{SQL-User-Name}' \
ORDER BY id"
# Use these for case sensitive usernames. WARNING: Slower queries!
#authorize_group_check_query = "SELECT ${groupcheck_table}.id,${groupcheck_table}.GroupName,${groupcheck_table}.Attribute,${groupcheck_table}.Value,${groupcheck_table}.Op FROM ${groupcheck_table},${usergroup_table} WHERE STRCMP(${usergroup_table}.Username, '%{SQL-User-Name}') = 0 AND ${usergroup_table}.GroupName = ${groupcheck_table}.GroupName ORDER BY ${groupcheck_table}.id"
#authorize_group_reply_query = "SELECT ${groupreply_table}.id,${groupreply_table}.GroupName,${groupreply_table}.Attribute,${groupreply_table}.Value,${groupreply_table}.Op FROM ${groupreply_table},${usergroup_table} WHERE STRCMP(${usergroup_table}.Username, '%{SQL-User-Name}') = 0 AND ${usergroup_table}.GroupName = ${groupreply_table}.GroupName ORDER BY ${groupreply_table}.id"
authorize_group_check_query = "SELECT ${groupcheck_table}.id, ${groupcheck_table}.GroupName, \
${groupcheck_table}.Attribute, ${groupcheck_table}.Value,${groupcheck_table}.Op \
FROM ${groupcheck_table}, ${usergroup_table} \
WHERE ${usergroup_table}.Username = '%{SQL-User-Name}' AND ${usergroup_table}.GroupName = ${groupcheck_table}.GroupName \
ORDER BY ${groupcheck_table}.id"
authorize_group_reply_query = "SELECT ${groupreply_table}.id, ${groupreply_table}.GroupName, ${groupreply_table}.Attribute, \
${groupreply_table}.Value, ${groupreply_table}.Op \
FROM ${groupreply_table},${usergroup_table} \
WHERE ${usergroup_table}.Username = '%{SQL-User-Name}' AND ${usergroup_table}.GroupName = ${groupreply_table}.GroupName \
ORDER BY ${groupreply_table}.id"
#######################################################################
# Authentication Query
#######################################################################
# This query is used only to get the Password for the
# user we want to authenticate. The password MUST
# be the first field in the return row data.
#######################################################################
authenticate_query = "SELECT Value,Attribute FROM ${authcheck_table} \
WHERE UserName = '%{User-Name}' AND ( Attribute = 'User-Password' OR Attribute = 'Crypt-Password' ) \
ORDER BY Attribute DESC"
#######################################################################
# Simultaneous Use Checking Queries
#######################################################################
# simul_count_query - query for the number of current connections
# - If this is not defined, no simultaneouls use checking
# - will be performed by this module instance
# simul_verify_query - query to return details of current connections for verification
# - Leave blank or commented out to disable verification step
# - Note that the returned field order should not be changed.
#######################################################################
# Uncomment simul_count_query to enable simultaneous use checking
# simul_count_query = "SELECT COUNT(*) FROM ${acct_table1} WHERE UserName='%{SQL-User-Name}' AND AcctStopTime IS NULL"
# simul_verify_query = "SELECT RadAcctId, AcctSessionId, UserName, NASIPAddress, NASPortId, FramedIPAddress, CallingStationId, FramedProtocol FROM ${acct_table1} WHERE UserName='%{SQL-User-Name}' AND AcctStopTime IS NULL"
#######################################################################
# Accounting Queries
#######################################################################
# accounting_onoff_query - query for Accounting On/Off packets
# accounting_update_query - query for Accounting update packets
# accounting_start_query - query for Accounting start packets
# accounting_start_query_alt - query for Accounting start packets
# (alternate in case first query fails)
# accounting_stop_query - query for Accounting stop packets
# accounting_stop_query_alt - query for Accounting start packets
# (alternate in case first query doesn't
# affect any existing rows in the table)
#######################################################################
accounting_onoff_query = "UPDATE ${acct_table1} \
SET AcctStopTime = (now() - '%{Acct-Delay-Time:-0}'::interval), \
AcctSessionTime = (EXTRACT(EPOCH FROM(now()::timestamp with time zone - AcctStartTime::timestamp with time zone - '%{Acct-Delay-Time:-0}'::interval)))::BIGINT, \
AcctTerminateCause='%{Acct-Terminate-Cause}', AcctStopDelay = '%{Acct-Delay-Time:-0}' \
WHERE AcctSessionTime IS NULL AND AcctStopTime IS NULL AND NASIPAddress= '%{NAS-IP-Address}' AND AcctStartTime <= now()"
accounting_update_query = "UPDATE ${acct_table1} \
SET FramedIPAddress = NULLIF('%{Framed-IP-Address}', '')::inet \
WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' \
AND NASIPAddress= '%{NAS-IP-Address}' AND AcctStopTime IS NULL"
accounting_start_query = "INSERT into ${acct_table1} \
(AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctAuthentic, \
ConnectInfo_start, CalledStationId, CallingStationId, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay) \
values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', \
'%{NAS-Port}', '%{NAS-Port-Type}', (now() - '%{Acct-Delay-Time:-0}'::interval), '%{Acct-Authentic}', '%{Connect-Info}', \
'%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Service-Type}', '%{Framed-Protocol}', \
NULLIF('%{Framed-IP-Address}', '')::inet, '%{Acct-Delay-Time:-0}')"
accounting_start_query_alt = "UPDATE ${acct_table1} \
SET AcctStartTime = (now() - '%{Acct-Delay-Time:-0}'::interval), AcctStartDelay = '%{Acct-Delay-Time:-0}', \
ConnectInfo_start = '%{Connect-Info}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' \
AND NASIPAddress = '%{NAS-IP-Address}' AND AcctStopTime IS NULL"
accounting_stop_query = "UPDATE ${acct_table2} \
SET AcctStopTime = (now() - '%{Acct-Delay-Time:-0}'::interval), AcctSessionTime = '%{Acct-Session-Time}', \
AcctInputOctets = (('%{Acct-Input-Gigawords:-0}'::bigint << 32) + '%{Acct-Input-Octets:-0}'::bigint), \
AcctOutputOctets = (('%{Acct-Output-Gigawords:-0}'::bigint << 32) + '%{Acct-Output-Octets:-0}'::bigint), \
AcctTerminateCause = '%{Acct-Terminate-Cause}', AcctStopDelay = '%{Acct-Delay-Time:-0}', \
FramedIPAddress = NULLIF('%{Framed-IP-Address}', '')::inet, ConnectInfo_stop = '%{Connect-Info}' \
WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' \
AND NASIPAddress = '%{NAS-IP-Address}' AND AcctStopTime IS NULL"
accounting_stop_query_alt = "INSERT into ${acct_table2} \
(AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctStopTime, \
AcctSessionTime, AcctAuthentic, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, \
AcctTerminateCause, ServiceType, FramedProtocol, FramedIPAddress, AcctStopDelay) \
values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', \
'%{NAS-Port}', '%{NAS-Port-Type}', (now() - '%{Acct-Delay-Time:-0}'::interval - '%{Acct-Session-Time:-0}'::interval), \
(now() - '%{Acct-Delay-Time:-0}'::interval), '%{Acct-Session-Time}', '%{Acct-Authentic}', '%{Connect-Info}', \
(('%{Acct-Input-Gigawords:-0}'::bigint << 32) + '%{Acct-Input-Octets:-0}'::bigint), \
(('%{Acct-Output-Gigawords:-0}'::bigint << 32) + '%{Acct-Output-Octets:-0}'::bigint), '%{Called-Station-Id}', \
'%{Calling-Station-Id}', '%{Acct-Terminate-Cause}', '%{Service-Type}', '%{Framed-Protocol}', \
NULLIF('%{Framed-IP-Address}', '')::inet, '%{Acct-Delay-Time:-0}')"
}
