gsmlib-1.10 - reactivated code in gsm_at to retry sending PDU after unsolicited result code - added description of unicode handling to FAQ - compilation fixes for gcc-3.0.4 - added quick exit for ATZ in UnixSerialPort constructor if phone gives ERROR - added fix for phones that return +CLIP: "Number not available." instead of giving caller ID - added get/setCLIRPresentation() functions to MeTa (contribution by ivan) - added "NO CARRIER" event to the event mechanism (contribution by clock) - added Win32 port of gsmsmsd (thanks to Konstantin Forostyan) - further extented Win32 port of gsmsmsd to handle outgoing messages - fixed problem with Ericsson T39m SMS sending (zero bytes in handshake) - added capability to send concatenated SMSs in gsmsmsd and gsmsendsms - fixed unsigned/signed char problems in Unix/Win32 serial port implementations - added capability to send multiple SMSs to gsmsendsms/gsmsmsd gsmlib-1.9 - fixed decoding of alphanumeric addresses in gsm_sms_codec. - fixed bug in gsm_event when checking whether to send an acknowledgment for a received SMS - More Siemens-specific patches, some extensions to the AT command parser - New code to print PIN status and set the PIN in gsmctl, setPIN function in MeTa class (Andreas Roedl <flood@flood-net.de>) - Missing virtual destructor in Port class caused destructors of UnixSerialPort and Win32SerialPort not to be called - fixed - Added new code to set functionality level on or off (thanks to David Woodhouse) - found bug in SMS store implementation that caused the now obsolete _capacity member to be set to a too low value - Added changes contributed by Frediano Ziglio to enable compilation on Windows - Added call waiting functions contributed by Ivan gsmlib-1.8 - added workaround for Nokia Cellular Card Phone RPE-1 GSM900 that reports a CDS event that actually is an CDSI and sends a spurious CR when waiting for a PDU - SMS are stored without index in files now - tested compilation with gcc-3.0.2 - added workaround for gsmlib getting confused when receiving SMS and echo cannot be switched off - echos of the AT command are filtered out in chat() now - extended gsm_phonebook preload mechanism to batch-load phonebooks where the index does not start with 1 - Added workaround for Motorola Timeport 260 to write back deliver messages to the ME - added workaround for compilation with libstdc++-v2 - private members of MeTa made protected - new ext directory for phone-specific extensions gsmlib-1.7 - fixed bug with calculation of userData length if userDataHeader is present (octet count was subtracted, not septet count) - fixed problem with string erase() at end of PDU for Falcom A2-1 - -t/--charset option of gsmpb did not work due to missing parameter of getopt_long, fixed - The SMS decoder/encoder can now handle alphanumeric addresses in the GSM default alphabet - set only those SMS stores that are actually needed to perform SMS store operation - Fixed signalling error 321 (Invalid memory index) when trying to read from empty SMS store entry - Fixed parsing error when reading current network operator if no network connection - Added capability to parse cell broadcast messages to gsmlib and the gsmsmsd program - Added workaround for Motorola Timeport 260 bug that doesn't correctly report the message status when retrieving SMS messages from the store - Added workaround for Motorola Timeport 260 that allocates index numbers to SMS messages linearly so that index number can be be larger than capacity reported by AT command gsmlib-1.6 - more fixes for the COPS=? return format - fixed putBack() behaviour in gsm_parser (don't put back if end-of- stream is reached) - added toString() function to gsm_sms_codec's Address class - SMS dates and times are now output in a locale-specific manner - fixed bug in Parser::getEol() (_eos was accidentally set to true) - added gsm_win32_serial module, Win32 project (VC++), and Option FirstFone changes contributed by Frediano Ziglio <freddy77@angelfire.com> - fix in COM port recognition for Win32 (gsm_util) - renamed library files libgsm.* to libgsmme.* (now starting with version 1.0) because of conflict with another Debian package - in gsm_phonebook and gsm_store the caching of entries can now be disabled - added facilities to use other character sets for phonebooks - fixed workaround for Ericcson SH888 (missing service centre address) - fixed bug in gsm_phonebook that prevented texts with the character '@' to be written to to the phonebook - fixed nasty memory allocation bug in gsmpb/gsmsmsstore (automatic MeTa variable went out of scope even though used later) - fixed Y2K problem in timestamp printing - fixed "make dist" to include win32 files - added workarounds for Falcom A2-1 (autodetection and enabling by "export GSMLIB_FALCOM_A2_1_FIX=1", zero after PDU) - fixed bug that caused gsmlib to abort with an assert if a malformed PDU was read gsmlib-1.5 - adapted MeTa::getCurrentOPInfo() and MeTa::getAvailableOPInfo() to handle Nokia 8290 quirks - code to set line speed in gsm_unix_serial reinserted (it was accidentally removed in previous version) - minor changes to initialization sequence in gsm_unix_serial - bugfix in gsm_unix_serial.cc: readByte() == 0 does not mean no more bytes, but is legal value - additionally allowed characters "*#pwPW" and '+' at any position in telephone numbers - added environment variable GSMLIB_SH888_FIX that (if set) enables the gsmlib workaround for Ericsson SH888's broken SMS TPDUs - fixed command line parameter handling bug in gsmsmsstore - fixed %files section .spec file to correctly include manual pages - fixed some bugs in terminal line setup (gsm_unix_serial) regarding software/hardware handshake - added new "--sca" option to SMS-related apps to set the SMS service centre address on the command line (useful if default is not set correctly in the phone) - removed tcflush() call in UnixSerialPort::putLine that broke the event system needed for gsmsmsd gsmlib-1.4 - more attempts to fix UNIX serial port access - allow custom backends for sorted phonebooks to be integrated into gsmlib (eg. for RDBMS or LDAP storage). Introduced a new module gsm_sorted_phonebook_base that contains the infrastructure for this. - Now gsmlib needs at least gcc-2.95.2 to compile correctly. - Implemented option to open device with software handshaking (XON/XOFF). The applications now have an -X option to turn this on. - gsmlib now contains a facility to interrupt ongoing activity in a controlled way. gsm_unix_serial now blocks for one second maximum until it checks whether it was interrupted. - various small bugfixes - added workaround for phones that omit ':' in AT command responses - all debugging output is now printed to stderr - gsm_unix_serial: new attempt to initialize modem in a more robust way (contributed) - gsm_sms: fixed handling of user data header (contributed) gsmlib-1.3 - fixed bug that caused gsmlib to hang if TAs don't respond to AT inquiries for serial number etc. - fixed bug with handling of CB mode AT command construction in gsm_me_ta.cc, setSMSRoutingToTA() - allow '+' as the first character of phonenumbers - implemented reading and writing from/to stdin/stdout in gsm_sorted_[sms_store|phonebook] and gsmpb/gsmsmsstore - fixed (hopefully) the intermittent hangup problem in gsm_unix_serial_port - Some mobile phones cannot report the status of some facility locks. The gsmctl program now prints out "unknown" in the corresponding result line from the FLSTAT operation if this problem occurs (instead of terminating). - switched off non-blocking access to serial device gsmlib-1.2 - gsmlib now also works with TAs that can not switch off echo - fixed bug that prevented gsmlib from copying SMS_DELIVER and SMS_STATUS_REPORT back to the ME - introduced -I (--init) parameter to all command line apps to allow for device-specific initialization - made SMS decoding routines more robust against bad SMS (especially premature end of PDU) - New debugging feature: If compiled without NDEBUG, the environment variable GSMLIB_DEBUG determines the verbosity of debugging messages (0 = none, 1 = many, 2 = extreme) gsmlib-1.1 - Parse multiple COPS (operator info) lines returned by some phones - accept string as numeric value when interpreting COPS=? response (Ericsson phone + GSM12 GSM module) - accept string as numeric value when interpreting COPS? response (Ericsson phone + GSM12 GSM module) - retry when initializing TA (ATZ/ATE0 sequences) - Set SMS routing: allow mode 3 (special in-band technique) when setting routing to TA (gsmlib should not be active when phone is switched to data mode anyway) - Set SMS routing: handle buffer mode but only if it was reported by the +CNMI=? command (the Ericsson GM12 GSM modem does not like it otherwise) - Determine CPMS number of parameters for CPMS command (better compability with some mobile phones / GSM modems) - handle missing service centre address in incoming SMS for Ericsson model 6050102 - add new RING event to gsm_event.h/.cc, gsmsmsd now handles RING indications properly - defined default event handler mostly to handle unexpected RING indications that might otherwise confuse gsmlib - gsmsmsd: can now be cleanly terminated using the SIGINT or SIGTERM signals - gsmsmsd: now handles multiple incoming SMS messages cleanly, before there was a chance that some SMS messages coming in rapid succession might have been lost - gsmsmsd: flush option implemented that dispatches and erases existing messages in SMS store - gsmsmsd: added sending of SMS messages. gsmsmsd now accepts a spool directory options where it expects to find SMS message file in a simple format, these are dispatched every 5 seconds gsmlib-1.0 - RPM support (spec file) - the "+" is at least for the Siemens S10 and S25 a valid char in telephone numbers (inserts a pause of 3 seconds), therefore it is now allowed as part of telephone numbers - fixed incorrect analysis of facility class parameters in gsmctl.cc - restricted call forward time to 0..30 seconds in gsm_me_ta.cc gsmlib-0.3 - implemented timeout for accessing the mobile phone in order to avoid hangs - upgraded to BETA status - written glossary for abbreviations (gsminfo(7)) - implemented NLS support, added German translations - implemented preserving the index position of phonebook entries in gsmpb.cc and gsm_sorted_phonebook - cleaned up manual pages (alphabetic ordering of options etc.) - gsmsmstore program and gsm_sorted_sms_store./.cc completed and tested - gsmpb and gsmsmsstore now have --verbose (-V) options for detailed progress reporting - now check for getopt_long in configure (can be compiled on non-GNU systems) - removed asserts regarding lengths of numeric data types, put them into configure script - sorted options in apps/*.cc alphabetically (--help option) - in gsm_sorted_sms_store compare telephone numbers more sensibly - introduced -v option to gsmpb and gsmsmsstore to report execution statistics - tested new synchronization function in gsmpb program - implemented operations in the gsmctl program - rewrote test cases (compare output) - completed gsmsmsstore program - first changes for compilation with VC++ 6.0 on WIN32 gsmlib-0.2 - gsmsmstore program and gsm_sorted_sms_store./.cc mostly completed but not yet much tested - Fixed problem with some mobiles/TAs not giving prefixes after certain AT sequences (reported for SIEMENS S25/IrDA, Nokia 8810/IrDA) - Fixed problem with Xircom REM56G.100/Nokia 6150 that give "CABLE: GSM" instead of "OK" after ATZ - Mobiles that return nothing when empty phonebook entries are requested are now handled correctly (reported for SIEMENS S25/IrDA) - optimizations in gsm_*_phonebook modules (less AT commands necessary) - new synchronization function in gsmpb program that is (hopefully) more sensible (see man page for details) gsmlib-0.1 - Initial release