- Thu Jun 30 2005 Lev Givon <lev@columbia.edu> 2.4.2-1mdk
- Updated to 2.4.2.
- Mon May 30 2005 Lev Givon <lev@columbia.edu> 2.4.1-1mdk
- Updated spec file for Mandrake.
- Thu Aug 26 2004 Tim Mattox <tmattox@gmail.com>
- Supplied a default node hosts template file that only has localhost
- Reverted yesterday's change in hostname/alias order so that the master's
default hostname is again listed first. The real workaround for the
experienced bug is to not list the master's non-cluster IP addresses in
the master's and nodes' /etc/hosts files.
- Added a check and warning to wwmaster.hosts for the above. - Wed Aug 25 2004 Tim Mattox <tmattox@gmail.com>
- Restructured the code in wwnode.sync to fix an obscure /etc/group bug
This should also clean up some other pathological group and passwd cases.
Unfortunately to fix the obscure bug, it needed an extensive code change.
- wwnode.sync will now support different /etc/hosts templates per vnfs as
it was intended to do when that feature was added in 2.2.0.
- changed the --synctree option of wwnode.sync to --norsync to better match
what it actually does. Note: the old option still works for now.
- modified Warewulf.pm to add the master's default hostname to the end of the
list of hostname aliases when generating /etc/hosts entries for the
master and the nodes. This works around a "bug/misfeature" of both
the rlogind & rshd reporting "Host address mismatch" in some situations
where the master/node has more than one IP address and has hostname aliases.
- wwnode.sync now includes all the variations on the hostnames in hosts.equiv
- wwvnfs.build does a "too small" check to look for a failed wwvnfs.install
- squashed another ramdisk size calculation bug in wwvnfs.build
- wmaster.initiate warns if master's hostname resolves to 127.0.0.1
- Released 2.2.3 - Tue Aug 24 2004 Tim Mattox <tmattox@gmail.com>
- Added support for an optional "gateway = " parameter in nodes.conf
If it's left blank or not assigned, the node's gateway will be set to
the IP address of the master's default network device, which is the
same behaviour before adding this option. - Mon Aug 23 2004 Tim Mattox <tmattox@gmail.com>
- Added "skip" parameter to nodes in nodes.conf, so you can put in a
placeholder for an unused nodename. Warewulf will not see or talk
about a skipped node, however, it will consume a nodeid, and thus the
corresponding IP address will not be assigned by warewulf. A node
entry with a parameter "skip = 1" does not need any other field assigned.
This is useful for long term "dead" nodes, or for those who don't want
a node0000. - Sun Aug 22 2004 Tim Mattox <tmattox@gmail.com>
- Changed warewulf-node to not own /etc/issue, but to only symlink it to
/etc/issue-warewulf if it didn't exist. Hopefully this will work with FC.
- Added "-b 1024" to the mke2fs call in make_img in wwvnfs.build. The
initrd code in the kernel only supports that blocksize. This makes it
possible to have the initrd be larger than 512 MB.
- Added optional vnfs.conf parameter "modules path prefix" to change where
the modules are copied from when wwvnfs.build makes the ramdisk.
- Made wwvnfs.build work with 2.6 kernel's .ko module files.
- Fixed a close() call in wwnode.sync (/etc/group stuff still needs work.) - Tue Aug 17 2004 Tim Mattox <tmattox@gmail.com>
- Added a sanity check for 'default network' to wwmaster.initiate
- Added a message to ignore the warning about first32pm, and tweaked the
call to mknbi-linux in wwvnfs.build to eliminate a UTF-8 warning
(the first32pm option is still needed for older mknbi versions)
- Added 'async' to the NFS exports options created by wwmaster.exports.
This removes a warning about NFS changing which was the default behaviour.
If you need sync (or other NFS export options), edit the wwmaster.exports
script, or supply a patch that makes it a config option for everyone...
- Added an optional yum.conf parameter to vnfs.conf so that wwvnfs.install
can be set to use a different yum.conf file from the master. This allows
for the master to be a different distro, arch, etc. than the nodes.
- Added warning to wwvnfs.build about needing to rerun wwmaster.dhcpd if
any nodes are using PXELINUX. Also, moved the invocation of wwmaster.dhcpd
in wwmaster.initiate to the end, so it comes after wwvnfs.build
- Added a check to wwmaster.dhcpd for existence of the pxelinux.cfg template(s)
- Simplified/improved the prompt text in wwmaster.initiate
- Reverted the name of the specfile to not include the version number.
- Released 2.2.2 - Thu Aug 12 2004 Tim Mattox <tmattox@gmail.com>
- Added a Provides: kernel line to the warewulf-node RPM to try and prevent
yum from pulling in a kernel package into the VNFS where it causes problems. - Wed Aug 11 2004 Tim Mattox <tmattox@gmail.com>
- Fixed the generation-of/appending-to master's and nodes' /etc/hosts file
and made the default template be the master's /etc/hosts
- Released 2.2.1 - Fri Jul 30 2004 Tim Mattox <tmattox@gmail.com>
- Tweaked the excludes & exclude-nfs files for CentOS 3.1 and x86_64
- wwvnfs.build now explicetly ignores the VNFS's /lib/modules, since
modules are taken from the master's /lib/modules/
These two reduced the ramdisk size from about 60 MB to 30 MB on CentOS.
- Released 2.2.0 - Thu Jul 29 2004 Tim Mattox <tmattox@gmail.com>
- Removed size=30% parameter of the tmpfs mount in the node's linuxrc since
"older" kernel versions still in use didn't support the percent notation. - Wed Jul 28 2004 Tim Mattox <tmattox@gmail.com>
- Added support for using PXELINUX (version >= 2.05) instead of Etherboot.
To use PXELINUX, put a copy of pxelinux.0 from kernel.org into /tftpboot,
Then edit nodes.conf to set pxeboot = pxelinux.0 in the [defaults] section
or for individual nodes.
- Added support for an alternative boot MAC address to support boot NICs
that retain a custom MAC address across warm boots. It's the same node,
but dhcpd needs to have the two sets of MAC address info. FNNs will
experience this. To use, just add "hardware addr2 = XYZ" to each node
entry in node.conf, replaceing the XYZ with the node's custom MAC address.
- Adjusted excludes-nfs so that more cron stuff is on the ramdisk and not NFS
- Added FNN related stuff to master-includes to make FNN support simpler. - Tue Jun 29 2004 Tim Mattox <tmattox@gmail.com>
- Updated my e-mail address
- Added a linuxrc script to copy the ramdisk to a tmpfs root when a node boots
This removes the need for seperate tmpfs /tmp and /var/tmp, as well as
makes it less critical to accurately size the original ramdisk.
The contents of the tmpfs are also swapable if the node has swap.
- The node's gateway is the master's IP on the default network, rather than
force it to be on the admin network.
- Added libstdc++ to vnfs.conf "include packages", for better LAM support
- Added support for "disable virtual terminals" option in vnfs.conf
- made warewulf-init append to network config files rather than truncate
them, which helps for FNN support. - Tue Jun 15 2004 Greg Kurtzer <GMKurtzer@lbl.gov>
- Added support for defining a specific interface's IP address
- Added support for 'other net's in nodes.conf and wwmaster.dhcp
- Abstracted out the hosts file for people that need customization - Wed Apr 14 2004 Greg Kurtzer <GMKurtzer@lbl.gov>
- Made slight modifications to enable SGE
- Added wwmaster.info tool - Wed Apr 7 2004 Greg Kurtzer <GMKurtzer@lbl.gov>
- Released 2.1
- Wed Apr 7 2004 Tim Mattox <tmattox@gmail.com>
- You can now use the = symbol in the vnfs.conf 'kernel args' parameter
- Upped the extra number of inodes for the hybrid ramdisk/NFS, and made
the warning condition about 'few free inodes' be more loose.
- Added more default entries for /usr/share in the symlinks-nfs file based on
a cAos-1 system... Running out of inodes on the ramdisk is annoying ;-) - Mon Apr 5 2004 Tim Mattox <tmattox@gmail.com>
- Fixed a few bugs with the split out of warewulfd and wulfd init scripts
- Updated docs/CHANGELOG & docs/INSTALL files for the upcoming 2.1 release
- Fixed several help messages in the ww* commands to match their new names
- Added support for 'wulfd options' to wwvnfs.build and init.d/wulfd - Mon Apr 5 2004 Greg Kurtzer <GMKurtzer@lbl.gov>
- Split out the warewulfd and wulfd init scripts
- Changed the default node names for admin, cluster and sharedfs to
node0000-admin, node0000-clust, and node0000-sfs - Fri Apr 2 2004 Greg Kurtzer <GMKurtzer@lbl.gov>
- Removed the node sysconfig/wulfd file (now created by wwvnfs.build)
- Thu Apr 1 2004 Greg Kurtzer <GMKurtzer@lbl.gov>
- Woops, fixed a bad configuration option in the default config
- Changed the default node names for admin, cluster to node0000-a/c
- Moved the net device configurations from vnfs.conf to nodes.conf
- Added support for Windows cluster management
- Changed the usertools nomenclature to match the sbin nomenclature paradigm - Mon Mar 29 2004 Tim Mattox <tmattox@gmail.com>
- Fixed a minor bug in wwmaster.exports, now uses 'restart nfs' command
- Increased the feedback from wwmaster.initiate and wwvnfs.install
- wwvnfs.build is now able to disable some virtual terminals in inittab
- wwvnfs.build makes mountpoints for 'vnfs dir' and 'sharedfs dir' if needed
- Fixed a bug in the 'stop' command of /etc/rc.d/init.d/warewulfd - Mon Mar 29 2004 Greg Kurtzer <GMKurtzer@lbl.gov>
- Fixed up some minor bugs in the spec file
- Tue Mar 16 2004 Greg Kurtzer <GMKurtzer@lbl.gov>
- Brought up to date with 2.1 development tree
- Made so many fixes I can't remember them all (rewrite of many components) - Wed Mar 10 2004 Greg Kurtzer <GMKurtzer@lbl.gov>
- Brought up to date with 2.0 development series
- Changed the files prefix to rpm macros - Sun Nov 16 2003 Greg Kurtzer <GMKurtzer@lbl.gov>
- Added 'Requires:' to node subpackage
- Added 'Prepreq:'s to node subpackage - Wed Nov 5 2003 Greg Kurtzer <GMKurtzer@lbl.gov>
- Removed the nfskit and isokit subpackages
- Removed Myrinet default mapper.args file - Thu Oct 30 2003 Greg Kurtzer <GMKurtzer@lbl.gov>
- Removed the VNFS component of the SPEC
- Disabled restartting of services - Fri Sep 26 2003 Greg Kurtzer <GMKurtzer@lbl.gov>
- Modified the %post node to make sure that warewulf-init and warewulfd are on
- Wed Sep 24 2003 Greg Kurtzer <GMKurtzer@lbl.gov>
- Added config file /etc/warewulf/dhcpd.tpl to %files
- Tue Sep 16 2003 Greg Kurtzer <GMKurtzer@lbl.gov>
- Added the nagios plugin subpacakges to the SPEC
- Mon Aug 11 2003 Greg Kurtzer <GMKurtzer@lbl.gov>
- Corrected dir perms of /var/tmp in the nodefs (thanks to Geoff Galitz)
- Cleaned SPEC so config is not overwritten and service is restartted
properly
- Did a large amount of cleaning in the SPEC - Wed Jul 23 2003 Greg Kurtzer <GMKurtzer@lbl.gov>
- Changed spec to make upgrades even more reliable
- Adjusted spec to reflect node filesystem changes - Fri Apr 18 2003 Greg Kurtzer <GMKurtzer@lbl.gov>
- Made some basic chages to SPEC to make upgrades more reliable
- Tue Jan 14 2003 Greg Kurtzer <GMKurtzer@lbl.gov>
- Added the node-partition config file in the node's /etc/warewulf/
- Tue Dec 17 2002 Greg Kurtzer <GMKurtzer@lbl.gov>
- Added the Conflicts tag to warewulf-node just in case...
- Got a bit more specific with the bin/* and sbin/* tools for each package
- Fixed some weirdness in the node RPM - Sun Nov 10 2002 Greg Kurtzer <GMKurtzer@lbl.gov>
- Split Warewulf into 3 packages: warewulf, warewulf-node and warewulf-nodefs
- Sun Sep 29 2002 Greg Kurtzer <GMKurtzer@lbl.gov>
- Build first spec file for Warewulf
