# # In order to use the qcam backend, you'll need to enable to line with # the port address for your scanner. You can enable multiple lines if # you really have a QuickCam connect to each port. # #u0x37b # /dev/lp0 forced in unidir mode #u0x378 # /dev/lp1 forced in unidir mode #u0x278 # /dev/lp2 forced in unidir mode #0x37b # /dev/lp0 #0x378 # /dev/lp1 #0x278 # /dev/lp2 0x3bc # /dev/lp0
