---- Release 2.0.0 on 1.13.2008 ----
2008-01-12 Julian Lamb
* draw.c: Fix a few minor cairo rendering issues: 1) fix rendering of
circular interpolation within a polygon fill. 2) Fix rendering of
flashed polygon apertures with holes in them.
* tests: Add 8 new test files to test out aperture drawing, and 1 to test
polygon fills.
* tests/golden/*: Update all golden files in preparation for 2.0 release.
20 tests were failing for a variety of reasons. Most were due to the
recent disabling of anti-aliasing on polygon fills, which caused very
small changes to the rendering of the polygon borders. The remainder
of the failings were due to spurious lines previously being drawn on
flashed apertures with holes (noticed by Stefan), which has now been
fixed.
* draw.c: Fix small error in cairo rendering of elliptical circular
interpolation paths.
* test/input/test-circlar-interpolation.gbx: added another test file.
2008-01-10 Julian Lamb
* interface.c: Try and fix bug where tooltips weren't showing up for some
users.
* many files: Implement on-the-fly switching between GDK and cairo
rendering, and set default setting on cairo builds to "Fast" (GDK).
* draw.c: Fix spurious line rendering noticed by Stefan on BGA pads.
* draw.c: Turn off anti-aliasing just on all polygon draws, since they were
showing seams on ground planes.
* draw.c: Fix clearing of BGA pin holes bug noticed by Stefan.
* draw.c: Add "exposure off" logic, allowing macros with the exposure=off
parameter to erase.
---- Release 2.0.0-beta ----
2008-01-09 Julian Lamb
* gerbv.c: Make sure we increase max_files by 2, since we may need to
open up two files for PNP layers (top + bottom). This fixes a segfault
after adding a PNP file to the project and then clicking "New".
2008-01-08 Julian Lamb
* callbacks.c: Change color dialog to "blocking", which prevents user
from modifying layer orders while it is running and preventing
possible problems with the layer tree code.
2008-01-07 Julian Lamb
* interface.c, callbacks.c: Add in warning dialogs if user starts a new
project or opens a project with existing layers to make sure they
don't accidentally close all layers.
* callbacks.c: Add in some logic to switch to inches in the rulers if the
scale gets too small in mils. Change the default unit back to mils.
* interface.c: Recognize the default unit and start the unit combo box
to the right one.
* render.c: Change the default screen size scale factor to where mils
can reasonably show up on the rulers.
* draw.c: Revert back to old oval rendering for the time being, since the
new one seems to be having issues...
* gerbv.c, others: Add a dialog to confirm the user wants to open a file
with invalid ASCII characters.
* pick-and-place.c: Make sure we check cir_seg height and width are > 0,
otherwise it can cause cairo rendering problems.
* draw.c: Reduce label text font size, since the protel-pnp example file
reveals problems fitting the text on the image.
2008-01-06 Julian Lamb
* pick-and-place.c, gerbv.c: Render top and bottom layers in separate
layers (if they exist). Rotate parts correctly and fix min/max
calculations so autoscaling works correctly. Also, add "top" and
"bottom" labels to layer names.
* draw.c, draw-gdk.c, gerb_aperture.h: Add rendering code in preparation
for aperture macro reordering.
* render.c, callbacks.c: Add in watch cursor during rendering to provide
feedback to user.
* callbacks.c: Tweak the color dialog checks to make sure it works after
destroying the dialog via the window manager. For cairo, speedup
rendering during layer actions by simply recompositing the final image
instead of redrawing everything. On layer deletion, reselect the first
row to always make sure a line is active.
* render.c: Reorder rendering so top layer is displayed on top.
* callbacks.c, render.c: Get unit changing combobox to work more elegantly
by updating all relevent fields immediately after changing units. Re-
enable mils on the rulers, since inches were just too large to be
usable for most boards.
* interface.c: Get gui to gracefully shrink to a small size to support
small screen resolutions. Prevent the sidebar from shrinking smaller
than looks respectable. Change analysis tools to refer to "visible"
layers rather than "active" layers to prevent confusion with the
highlighted row in the layer tree. Add a frame around the statusbar to
make it more visually appealing. Remove the "online manual" menu item
since we don't actually have one yet.
* draw.c: Change oval rendering to oblong, since that's probably what is
actually intended (GDK rendering already did this).
2008-01-05 Julian Lamb
* interface.c: Remove a billion glade-generated gtk_widget_show function
calls, since they aren't needed with gtk_widget_show_all.
* interface.c: Add tooltips for all menus and buttons.
* interface.c: Update menus for new pointer tool and remove reference
to control gerber option, since it's out for 2.0.
* callbacks.c: Make middle mouse button the default pan tool, and update
the mouse cursor is the user is panning or zooming with middle/right
mouse buttons.
* interface.c,callback.c: Add right click menu to the layer tree and add
column to indicate any modifications to the layer (for now, we just
show "I" for an inverted layer). Add back in support for individually
inverted layers. Also, fix XOR and OR rendering modes for GDK.
* render.c: Fix bug in alpha usage, which wasn't allowing transparency
on exported images.
* tests/golden/*: Update all golden files, since the png export wasn't
using alpha correctly, so all test files now render with a slightly
different color (since the black can bleed through the blue color
a tiny bit).
* gerber.c: Add support for include files (%IF) in the parser, which
hopefully completes 100% implementation of the RS-274X spec (yay!).
2008-1-4 Stuart Brorson (sdb@cloud9.net)
* src/callbacks.c, src/gerbv_screen.h, src/icons.h,
src/interface.c: Added pointer button to toggletools on task
bar.
2008-01-04 Stefan Petersen <spe>
* src/interface.c: Changed menu entries where another window is popped
up so text ends in three dots. "Save as" and "Print" uses built in
GTK operations, so the hack there got not so nice. Is there other
ways, like predefined with the three dots?
* src/draw-gdk.c: Fixed aperture macro drawing in GDK target as well.
2008-01-03 Julian Lamb
* draw.c: Fix some amacro rendering problems that Stefan uncovered.
* draw.c: Change the thermal rendering logic to do rendering without
push/pop operations, so that vector output will work (previously, the
cairo export defaulted to an image export for thermal rendering).
* render.c: Fix autoscaling for new amacro test (although the hack will be
unnecessary after we reorder the amacro rendering process to correctly
calculate the extents of each flashed macro aperture).
2008-1-2 Stuart Brorson (sdb@cloud9.net)
* src/Makefile.am, src/icons.h, src/interface.c:
Added icons for toggletool buttons: move, zoom, and measure.
2007-12-31 Julian Lamb
* gerbv.c: Rework project filename saving to save all layers with relative
pathnames, relative to the project file location. This allows projects
to be relocated, and fixes the second half of bug# 1443885.
* gerbv.c: More work on command line parsing.
* interface.c, render.c, callbacks.c: Reimplement different rendering modes
into the sidepane combobox for GDK. For cairo, allow the user to change the
quality vs speed.
* pick-and-place.c, draw.c: Correct pick and place parsing to use inches
for the basic unit. Render names of pick-and-place components to help
check placement.
2007-12-31 Stuart Brorson (sdb@cloud9.net)
* src/drill.[hc], gerber.[hc], gerbv.c, pick-and-place.[hc]:
Overhauled checks for file type. Now all file types (Gerber,
drill, pick-place) are FALSE by default, and only are TRUE
when positive of file type indications are found. Also added
specific check for RS-284-D, and throw error if -D is found.
2007-12-30 Julian Lamb
* callbacks.[ch], interface.c, others: Implement three "tools", namely
the pointer, zoom, and measure tool and hookup to the existing gui
stubs. Also, display an informative message in the message bar explaining
how to use the active tool (similar to Inkscape). Do some miscellaneous
cleanups in the gui code and rendering.
* callbacks.c, render.[ch]: Get basic printing support working.
2007-12-28 Stefan Petersen <spe@spe-laptop>
* src/draw.c, src/amacro.[hc]: gerbv can handle comments
and calculations in aperture macros. Unfortunate this
uncovered some errors in how aperture macros are drawn.
That will be next issue.
2007-12-28 Julian Lamb
* gerber.c, many files: Finish implementing all remaining Gerber functions
(offsets, mirrors, rotations, knockout, axis select, scale factors,
and justify). Rework the min/max calculation routines for much more
accurate autoscaling. Also, much updating was needed to allow the new
Gerber functions to autoscale correctly (e.g. scaling needs multiply all
the min/max values by the image scale factor, etc).
* tests/inputs/test-...: Add test files for all Gerber functions.
* tests/golden/*: Update all the golden files, since the autoscaling
rework made all the old golden files fail, since the scale factor is now
slightly off from the previous ones, making them fail.
2007-12-28 Stuart Brorson (sdb@cloud9.net)
* src/callbacks.c, src/drill.c, src/gerb_stats.[hc], src/gerber.c
src/gerbv_screen.h, src/interface.c, src/pick-and-place.c:
Added more checks for file type. This should fix problem
of segfaults when reading RS-274D. Make messages text window
(in sidepane) pop up if an error or warning is written to it so
user can immediately see problems. Robustified a few areas
of stats gathering code.
2007-12-25 Stuart Brorson (sdb@cloud9.net)
* src/gerber.c, src/callbacks.c, src/gerb_stats.[hc]:
Added reporting of all D codes used to Gerber reports window.
2007-12-23 Julian Lamb
* gerber.c, many files: Start reorganization of some gerb_image
parameters in preparation for adding final Gerber commands
like rotation, mirroring, and knockout. Also, normalize all
dimensions to inches in the image in order to simplify
rendering.
* tests/inputs/test-...: Add first three testsuite files to test
new commands.
2007-12-20 Stuart Brorson (sdb@cloud9.net)
* callbacks.c: Add scrollbars to Gerber aperture report window
since the report can grow to be very long.
2007-12-20 Julian Lamb
* render.c,callbacks.c,interface.c: Connect rulers and scrollbars and start
getting them functional.
2007-12-19 Stuart Brorson (sdb@cloud9.net)
* src/gerber.c, src/gerb_stats.[hc], src/gerb_image.h,
src/gerb_error.h, src/callbacks.c: Implemented reporting
of apertures found in Gerber files. Added to Gerber
reports window.
2007-12-17 Julian Lamb
* render,callbacks,interface: Restructure the whole rendering process by
separating out all zoom and pan information from the global variable
"screen". This was necessary to allow rendering without having a gtk
window open, allowing for export from command line and many others.
Also, the translation and zoom code is much more readable due to the
elimination of many variables. Also, the GDK color allocations were
eliminated to allow rendering without existing GDK colormaps in place.
* gerbv.c: Create the basic framework for exporting from the command line.
2007-12-16 Stuart Brorson (sdb@cloud9.net)
* src/callbacks.c, src/render.c, src/gerber.c,
src/gerb_error.h, src/gerb_stats.[hc]: Implemented reporting
of parse errors (with error level) found dring parsing of the
Gerber files.
2007-12-16 Stuart Brorson (sdb@cloud9.net)
* src/callbacks.c, src/render.c, src/gerb_error.h,
src/drill.c, src/drill_stats.[hc]: Implemented reporting
of all parse errors (with error level) found during
parsing of the drill file.
2007-12-16 Stuart Brorson (sdb@cloud9.net)
* src/drill.[hc], src/drill_stats.[hc]:
Fixed bug noticed by Joerg involving display of statistics
in drill file with M71 calling out metric units.
2007-12-14 Stuart Brorson (sdb@cloud9.net)
* src/callbacks.c, src/render.c: Added "General" tab to reports
windows for both Gerbers and Drills.
* src/Makefile.am, src/drill.c, src/gerb_image.h,
src/gerb_stats.[hc], src/drill_stats.[hc]: Refactor drill_stats
stuff to its own files in accordance with our function naming
scheme.
2007-12-14 Stuart Brorson (sdb@cloud9.net)
* Too many files to mention: Start adding list of drills found
to drill statistics reported. Now "analyze->active drill layers"
reports each drill defined, and the number of times it is used.
2007-12-14 Julian Lamb
* render,callbacks: Fully separate GDK and cairo rendering code to help
speed analization. Change from storing intermediate cairo patterns to
xlib surfaces for speed improvement. Eliminate image compositing on
each expose_event in order to make panning feel much quicker.
Temporarily disable idle function to fix GDK memory leaks and crashes.
2007-12-12 Julian Lamb
* src/gerbv.c: Fix half of bug #1443885 by eliminating segfault when
project file has layer files that won't load.
* src/callbacks.[ch],src/interface.c,src/render.[ch]: Big
cleanup of callbacks.c and start moving zoom code to render.c in
preparation for separating out zoom info from screen struct (allowing
for exporting to file and improving code readability). Add in scrollbars
and start hooking up rulers and scrollbar to panning.
2007-12-11 Julian Lamb
* src/callbacks.c,src/interface,src/render.c: Get drag and drop working
for layer sidebar. Fix memory leak for cairo rendering.
2007-12-10 Julian Lamb
* src/gerbv.c,src/callbacks.c,others: Get basic layer management gui up
and running. This includes visibility toggling, color picking, and basic
row management using the buttons at the bottom. A popup menu will also
be added when the user right clicks.
* src/gerber.c: Fix polygon rendering bug (bug #1190809). This was due
to the gerber parser not storing the correct polarity when closing
a polygon.
2007-12-09 Stuart Brorson (sdb@cloud9.net)
* src/callbacks.c, src/drill.c, src/render.[hc],
src/gerb_image.[hc], src/gerb_stats.[hc]: Added
beginnings of statistics report for drill files.
2007-12-09 Julian Lamb
* src/gerbv.c,src/callbacks.c: Reattach project open/save stuff in gui
and separate out some of the code back to gerbv.c.
* gerbv.c,callbacks.c,interface.c,others: Implement export-to-file for
PNG, PDF, SVG, and PS. Start implementing print functionality. More
cleanup of old gui code. Move log handler over to new message textview
in the sidebar.
2007-12-08 Julian Lamb
* src/render.c,src/callbacks.c: Fix translation code for cairo renderer
so things are correctly centered on the screen after a zoom-to-fit. Fix
scaling code for MM unit drawings.
* src/amacro.c,src/gerber.c: Fix error messages in amacro parsing (bug
#1845782) on FreeBSD systems (thanks to Joerg for the patch). Also, fix
possible hangs during amacro parsing (e.g. the file "%AM" would hang
gerbv, since it didn't correctly check for EOF).
2007-12-07 SDB
* render.c, render.h, Many other files: Started to refactor
gerbv. Also start to incorporate statistics gathering stuff
into gerber.[hc].
2007-12-07 Julian Lamb
* src/drill.c: Fix warning messages on some drill files (bug #1316247).
The drill parser did not zero out new gerbv_aperture_t structures, which
sometimes allowed junk in the param[x] portions, which confused the
parser and gave warnings and potentially incorrectly rendered drill
holes.
2007-12-07 Julian Lamb
* src/draw.c: Fix thermal rendering bug (bug #1024000) in the cairo
rendering code (this bug is not easily fixable in the GDK code, but
it is being obsoleted soon).
2007-12-06 Julian Lamb
* src/callbacks.c,src/gerbv.c: Add private implementation of
gdk_cairo_create to allow compilation with gtk < 2.8. Fixed bug in gerbv
which was causing gdk rendering to skip frames sometimes.
2007-12-05 Julian Lamb
* src/gerber.c,src/drill.h,src/gerb_image.h: Fix memory corruption issue
with G54 codes not checking if aperture numbers were within bounds (bug
#1843983). Also, bumped up max aperture number from 999 to 9999 based on
reports of some CAD packages using numbers this hig (even though it
clearly says 999 is the highest number in the RS274X spec). This will
increase memory usage somewhat, but hopefully should be acceptable.
2007-12-05 Julian Lamb
* src/drill.c: Fix parsing of drill files with commas in
place of decimals (bug #1844100).
2007-12-05 Julian Lamb
* src/draw.c,src/draw-gtk.c: Fix rendering of lines drawn with rectangular
aperatures (bug #1834944 and #1704942). Thanks to ineiev for the gdk
patch, which was reworked to apply to the cairo rendering too.
2007-12-04 Julian Lamb
* src/callbacks.[ch],src/interface.[ch]: Rename GTK widgets to more
recognizable names for better code legibility. Change sidebar to a
notebook view and add a messages tab. Organize statusbar layout. Add
"analyze" menu and move CAM related functions to it. Clean up toolbars
and combine into a single toolbar.
2007-11-30 Julian Lamb
* src/callbacks.[ch],src/interface.[ch],src/gerbv.c: Split out all gui
code out of gerbv.c and put it into the standard callbacks/interface
files. Started to overhaul gui during the process. Also, speed up the
feel of the cairo rendering by rendering layers to a cairo_pattern_t,
then compositing using these patterns. This allows the user to pan and
get much quicker response while the CPU renders the new view in the
background.
2007-11-30 Stuart Brorson sdb (at) cloud9 (dot) net
* configure.in, src/exportimage.c, src/gerbv.c,
src/pick-and-place.c:
Modify build system so you must explicitly --enable-cairo to
build using cairo, otherwise build using GDK by default.
2007-11-29 Stuart Brorson sdb (at) cloud9 (dot) net
* src/gerb_file.c, src/gerber.c, src/gerbv.c, src/gerbv_screen.h,
src/project.c: Added "File -> Open Gerber(s)" dialog. Added
int screen.last_loaded which keeps track of where to insert the next
Gerber to be loaded.
2007-11-26 Julian Lamb
* src/draw-gdk.[ch],src/gerber.c: Add gdk rendering code back in so it can
be compiled if cairo isn't available.
* src/gerber.c: Fix g_strconcat calls by adding NULL to end of arguments.
2007-11-20 Julian Lamb
* src/draw.c: Add rendering code for arcs. Also, fix the rendiring of oval
aperatures.
2007-11-19 Julian Lamb
* src/draw.[ch], examples/am-test/am-test.gbx: Complete the conversion to
the cairo rendering code. All aperature macros now render correctly, as
well as clear layer polarities. Note that several bugs were found in
the old aperature macro rendering functions (some rotations were not
done correctly, and the moire and thermal outer diameters weren't
correctly rendered) and those were fixed in the cairo conversion. The
am-test.gbx file was modified slightly to test these fixes.
* src/pick-and-place.c: Added an additional sanity check to make sure we
don't accidentally open some gerber files as PNP place files.
* configure.in: Add explicit cairo check.
2007-02-28 Julian Lamb
* src/draw.[ch], src/draw_amacro.[ch], src/gerbv.c: Start converting
rendering from gdk to cairo, in order to improve rendering capability,
and allow for future export to PDF/SVG/PNG/PS capability. The
draw_amacro files were combined into the draw files, since most of the
rendering functions were common between the two.
2007-02-21 Julian Lamb
* src/gerb_image.c, src/gerb_image.h: Added string label capability
to the gerb_image struct for future rendering of labels.
* src/pick-and-place.c: Updated parser to accept pick-and-place
files output from the PCB program. Performed more code cleanup
and implemented min/max screen calcs based on pick-and-place
files.
* example/LED.xy: Added a sample pick-and-place file output
from PCB, based on the LED example in the PCB source code.
2007-02-17 Julian Lamb
* src/pick-and-place.c, src/pick-and-place.h, src/gerbv.c,
src/csv.c:
Get example/protel-pnp/Pick*.csv to load through the normal
file loading code, implementing some simple logic to try
and guess if a given file is pick and place data.
2007-02-16 Julian Lamb
* src/pick-and-place.c, src/pick-and-place.h, src/gerbv.c:
Continue cleaning up pick-and-place code into simple
parser/renderer.
2007-02-15 Julian Lamb
* src/search.c, src/search.h, src/search-gui.c,
src/search-gui.h, src/search-cb.c, src/search-cb.h,
src/search-file.c, src/search-file.h, src/search-mark.c,
src/search-mark.h, src/pick-and-place.c,
src/pick-and-place.h, src/Makefile.am: Remove all
search* files, and combine important functions into
pick-and-place.[ch].
* src/gerbv.c, src/project.c: Remove gui-related references
to pick and place functions in preparation for moving
pick-and-place functionality to a simple parser/renderer.
2006-07-26 Stefan Petersen <spe@localhost.localdomain>
* src/log.c: Rewritten by Dino to use GTK2. The
previous caused SEGVs, so it was time to get
it exchanged.
2006-07-25 Stefan Petersen <spe@localhost.localdomain>
* loads of files: Added check of return value for
error checking.
* configure.in, man/gerbv.1.in, src/Makefile.am:
Remade build system so it should be able to handle
autoconf 2.60 and automake 1.9. Thanks FSF for yet
again breaking a working API.
2006-07-24 Stefan Petersen <spe@localhost.localdomain>
* src/gerb_file.c: Fixed bug #1236047, so now gerbv handles
negative coordinates.
* src/gerb_file.c, src/gerbv.c: Hopefully reduce SEGVs
even more by better error checking of operations in
gerb_fclose.
2006-07-23 Stefan Petersen <spe@localhost.localdomain>
* src/gerb_image.h, src/gerber.c, gerbv.c: Added patch from
extensive (Sourceforge alias) that according to him make
gerbv handles autoscaling of gerber files with mm better.
* src/drill.c, src/gerb_file.c: Fixed some possible memory
leaks and SIGSEGVs pointed out by Wolfgang Wieser
(hand patched from #1201900).
2006-05-07 Stefan Petersen <spe@localhost.localdomain>
* src/draw_amacro.c: Daniel Mack - zonque submitted
as a patch (1350283) (with no file attached though) that
renaming stack_t to macro_stack_t would make gerbv build
on darwin.
2005-09-28 Dan McMahill
* src/drill.c: Remove an lval typecast. Not only does this get
gerbv to compile with gcc4 and other non-gcc compilers, it
was no longer needed as the types involved were all doubles
anyway.
2005-02-15 Stefan Petersen <spe@siouxsie.umunet.org>
* src/draw_amacro.c: Forgot to copy gc to local_gc
so drawing inherits gc from image wide setting.
Pointed out by Warren Young.
2005-02-08 Tomasz Motylewski <t.motylewski@bfad.de>
* src/gerbv.c: malloc strlen+2, not +1
* src/gerb_file.c: malloc len+1, not len
2005-01-06 Stefan Petersen <spe@siouxsie.umunet.org>
* src/Makefile.am: A clean make distcheck by adding some missing
.h-files in Makefile.am
* src/*.c: Removed portability to GTK+ 1.x by changing configure.in
and remove USE_GTK2 in many small places. Also made some reformat
of the code to fit into the rest of the gerbv codebase.
2004-12-28 Stefan Petersen <spe@siouxsie.umunet.org>
* src/draw.c: When drawing circles I ignored if circle
had inner diameter, which was pointed out by Harry Eaton.
Not anymore... Closes bug #1050340 in this branch.
* Updated to TinyScheme 1.35
2004-10-30 Stefan Petersen <spe@siouxsie.umunet.org>
* src/draw_amacro.c: Forgot to use local_gc when drawing some
of the primitive aperture macros. Closes bug #1051045.
2004-10-13 Juergen Haas <juergenhaas@gmx.net>
* right click on selected part (current active selection) now works
also on shapes with PIN1 Off centre axis
FIXME circular shapes are recognised at a fixed radius of 3mm
Only works with units of gerbv match units used in pick and place
file!
2004-10-11 Juergen Haas <juergenhaas@gmx.net>
* a first draft of API documentation exists see doc/html/main.html
After adding further comments please use the following style:
/** brief description.
Now we can write details */
Afterwards use doc/Doxyfile.nopreprocessing to update documentation
with doxygen
2004-09-13 Stefan Petersen <spe@stacken.kth.se>
* src/gerbv.c: If you tried to invert color of an unloaded layer
you got a segmentation fault. I think it was discovered by Juergen.
2004-09-11 Juergen Haas <juergenhaas@gmx.net>
* right click in window with active selection now shows part
designator in statusline for easier identification in multiple
selections
FIXME only works if pin1 is not on center axis of part
2004-09-09 Juergen Haas <juergenhaas@gmx.net>
* added footprint column shown in result search window
2004-09-05 Juergen Haas <juergenhaas@gmx.net>
* fixed right click shows designator in statusbar does not hang program
* MINGW issues with path separators
2004-09-04 Juergen Haas <juergenhaas@gmx.net>
* fixed graphical representation of parts
* added gerb_transf_rotate
* added gerb_transf_shift
* fixed segfault when searching in comments
* designator is also shown checked by default
2004-08-28 Juergen Haas <juergenhaas@gmx.net>
* fixed GTK1 compilation issues
2004-08-27 Juergen Haas <juergenhaas@gmx.net>
* fixed memory issues pnp_state
* fixed too many calls to screen_for_delimiter
* added #include "string.h" to gerb_transf.c
* introduced update_combo_box_model()
* removed unnecessary code
* "beautified" gerb_transf.[ch]
* introduced rectangular shape for marking rectangular parts
* introduced a LOG MEssage, when right click on any selected part
(must be in active selection)
2004-08-26 Juergen Haas <juergenhaas@gmx.net>
* small bugfixes
* added double click draws selected item on screen
2004-08-25 Tomasz Motylewski <t.motylewski@bfad.de>
* eliminated memory leak MINGW32 gerb_file.c fd->data
* forced LC_NUMERIC to "C" in parse_gerb(), fixing bug
resulting in very thin lines (aperture size = 0) under GTK2
2004-08-23 Tomasz Motylewski <t.motylewski@bfad.de>
* cleaned up memory allocation in gerb_image.c
* improved project loading (still broken, there is no clear
design which function should do what).
* fixed memory leak plist_top->filename
2004-08-23 Juergen Haas <juergenhaas@gmx.net>
-saving projects:
is done in a more flexible way:
adds a similar line with "filename" replaced by "pick_and_place"
to project file
FIX ME: reading in a project file is still broken
-several bugfixes:
upon pressing mark button in select parts dialog it always updates
screen
2004-08-23 Tomasz Motylewski <t.motylewski@bfad.de>
* replaced scale with gerb_transf_t(.scale) - mirroring preparation
2004-08-22 Stefan Petersen <spe@stacken.kth.se>
* configure.in, src/Makefile.am: Use libpng-config to find out
parameters to use in CFLAGS and LIBS.
tag:SEARCH_SELECT_merged
2004-08-13 11:25 Search9-pre8 Juergen Haas <juergenhaas@gmx.net>
todo saving projects
Bugs fixed:
-if mark is pressed and there is no selection colour of layer
button does not change
-use of libmba's csv.[ch]
-automatic screening for delimiters
-if dialog is to be destroyed but it does not exist is caught
-upon loading a second gerberfile the first user dialog is
destroyed and parsed_PNP_data
-compiles under GTK1
-pressing mark actually also activates the new layer
-loading a gerberfile also activates layer
-tooltip to entry field now hints at usage of regexp
-arrow down acts like space
-colour change back to original colour fixed - new colour is
only allocated upon first draw on an empty layer
-dropdown list for available layers updates, whenever changes
to layer occur
-default layer now is actually also the one which is drawn ontoi
by default
(shown was MAXFILES-1, but it was drawn onto 0!)
-if there was an error loading a pnpfile
(e.g. incompatible csv format) select parts window is destroyed
also parsed_PNP_data is freed!
-arrow up reverses arrow down/space
-right click now selects and draws the selection on screen
-shift_arrows will add items to selection (moving up and down!)
-focus was always going to log window, for MINGW therefore
logging in log window was disabled as a first measure
2004-08-12 09:51 Search9-pre7 Juergen Haas <juergenhaas@gmx.net>
program now works under MINGW
code cleanup
BUG fixes:
-crash on lowercase entries(linux)using REG_ICASE
-crash on entries non existing in the list (MINGW/LINUX)
use of parsed_PNP_data as a global storage place for pnp data after parsing, in case of reopen search window initiated.
2004-08-07 09:29 Search9-pre6
search_gui.c:
-introduced GtkEntryCompletion listing choices for entry
works for designators and comments
_fixed bug in select_by_regex where
if comment was NULL a segfault occurred
-automatic scrolling to first hit works with designators only
probably utf8 issue with comments
strncasecmp causes segfault
-alignment in assembly mode improved, the first 15 elements
are also visible now
-upon enter in entry field we scroll to first hit in selection
-----------------------------
2004-08-04 09:29 search9-pre5: Juergen Haas <juergenhaas@gmx.net>
TODO introduction of libmba csv functions sublicensed under MIT
csv.[ch] have been extracted and made independent from msgno.[ch] and text.[ch] the latter
two wont be included
-----------------------------
2004-08-03 09:30 Search9-pre4: Juergen Haas <juergenhaas@gmx.net>
search_gui.c:
-fixed error with default layer selection:now always last layer is default, based on
MAX_FILES
cleaned up code
-----------------------------
Search9-pre3: Juergen Haas <juergenhaas@gmx.net>
TODO-towards project saving: added filename if pnp file is loaded
dont know how to handle loading of files because pnp file is not compatible to
gerberfile
->maybe including check for pnpfile in gerb_fopen?
-search-gui.c:
*implemented intelligent top/bottom selector
if sel exists, only non matching (either tpo or bottom parts) will be
unselected
if no sel exists, all top or bottom parts are selected
*implemented gtkcombobox for accessing layers, it will actually not allow overwriting
existing
layers( gerberfile displays), if loaded last after all gerberfiles
dynamic update of list to be more flexible
ok - used gtkliststore and GtkCellLayout for labels in Gtk_Combo_Box dropdown
list
TODO-MINGW: fgets seems to report NULL ???!!
-implemented #ifdef __MINGW32__ , HAVE LIBGEN_H, HAVE MMAN_SYS_H and HAVE_REGEX_H for
portability issues under WIN32/mingw
-------------------------------------
tag:SEARCH_SELECT_start
2004-07-12 (summary) Juergen Haas/Tomasz Motylewski <juergenhaas@gmx.net>
[pleases direct any questions, comments or bug reports to me or Tomasz]
* added new functionality: search, select and mark parts in layers
16-19 by loading a "Pick and Place" file in CSV Format:
entry1,entry2,..
NO OTHER FORMAT IS RECOGNISED SO FAR!
- src/search.c:
storing pnp data in memory
- src/search_cb.c:
callbacks
- src/search_file.c:
how to read in and parse pnp file
- src/search_mark.c:
create_marked_layer(layernumber); will draw the selected
parts as circles with a line going from centre to Pin1 on
the layer given as argument(at the moment layers 16-19 are
selectable)
- src/search_gui.c:
will load pick and place file and display the parts unique
designators, the Top/Bottom Flag and the corresponding
comment in a sortable list. Multiple selections can be made
by entering a regex search phrase or by simply clicking on
the desired items (for multiple selections by mouse click use
the well-known SHIFT-CTRL-click combinations)
* This version also includes first rough support for MINGW/WIN32
-not yet usable, route for reading in files is broken
2004-08-21 Stefan Petersen <spe@stacken.kth.se>
* src/gerbv.c: Made sure that only list of short options is
printed when only short options are compiled in.
2004-08-16 Stefan Petersen <spe@stacken.kth.se>
* doc/*, example/*: Makefiles.am removed Makefile.in wheh running
distclean. Not good. Spotted by Hamish Moffatt when packaging
for Debian.
2004-07-28 Stefan Petersen <spe@stacken.kth.se>
* src/draw.c: In gerbers the image can be negative or positive.
Then a part of the image called a layer can be clear or dark.
-"No more weed for you, Mr Gerber".
Richard Lightman found this and submitted both an example and
a patch. Thanks!
2004-07-11 Stefan Petersen <spe@stacken.kth.se>
* src/draw_amacro.c: When drawing thermals the cross ends in butt
instead of round which gives nicer look when thermal covers an
other via.
2004-06-27 Stefan Petersen <spe@stacken.kth.se>
* src/gerber.c: Improved comments on what is going and why. Also
improved a little in determining the size of the image. Now it
ignores points with no aperture defined, unless it is a polygon
area.
2004-06-24 Stefan Petersen <spe@stacken.kth.se>
* src/gerber.c: Removed two potential segfaults when running old
RS-274D format.
* src/gerber.c, src/batch.c, src/gerb_image.[hc]: Actually removed
all traces of MQ_END and MQ_START. That means that empty nodes
with only this information isn't saved, since the only time we need
this information is when parsing arcs. When an arc is parsed
the information wheter that arc is multi or single quadrant is
saved there. Also closes bug #942590.
* src/gerbv.c, src/gerbv_screen.h, src/gerb_image.c, src/gerb_image.h:
Added possibility to dump a parsed image as text to be able to
debug the parser.
2004-06-10 Stefan Petersen <spe@stacken.kth.se>
* src/draw_amacro.c: By mistake I assumed that all aperture
macros had exposure flags, but that was a mistake. Drew Moore
pointed it out to me. Thanks.
2004-06-05 Stefan Petersen <spe@stacken.kth.se>
* */.cvsignore, man/gerbv.1.in, src/gerbv.c: Minor updates and
cleanups from Dimitri. --help added for instance.
-- Release 0.16 --
2004-05-25 Stefan Petersen <spe@stacken.kth.se>
* src/draw_amacro.c: Now aperture macros handles exposures properly,
so some thermals can be drawn properly. Inspired by discussion with
Dimitri.
2004-05-19 Stefan Petersen <spe@stacken.kth.se>
* man/gerbv.1.in, src/Makefile.am, src/drill.c, src/gerbv.c,
src/tooltable.c, src/tooltable.h: Patch from Dimitri
(lastname unknown) to read tool files from for instance Eagle CAD.
2004-04-27 Stefan Petersen <spe@stacken.kth.se>
* configure.in, src/drill.c: Patch from Tomasz Motylewski as a start
remove dependencies on mmap et al (sys/mman.h) for targets lacking
these operations (mingw).
2004-04-21 Stefan Petersen <spe@stacken.kth.se>
* src/gerbv.c: Added keys f for fit, z for zoom in and Z for zoom out
after request from Stefan Thiede.
2004-04-04 Stefan Petersen <spe@stacken.kth.se>
* src/gerb_file.[hc], src/drill.c, src/amacro.c, gerber.c:
Changed gerb_fgetint() so it can return number of parsed characters.
This is useful when parsing coordinates in omit trailing zeros mode.
Omit trailing zeros is also handled properly now. Reported by Joachim
Jansen and filed as bug #918344.
2004-02-24 Stefan Petersen <spe@stacken.kth.se>
* src/gerbv.c: Apperently under GTK2 both delete_event and destroy
signals is emitted when you press the little cross in the
decoration bar. When both signals were emitted gerbv tried to free
the same memory twice.
2004-02-14 Stefan Petersen <spe@stacken.kth.se>
* src/Makefile.am: Making sure init.scm is copied to the right
place at install.
2004-02-13 Stefan Petersen <spe@stacken.kth.se>
* src/gerber.c: The good old circles revisited. This time Dan
noticed that circles with the same start and end point did not
draw properly ie as circles. It became points.
2004-02-08 Stefan Petersen <spe@stacken.kth.se>
* configure.in: Apperently auto* doesn't define $prefix if you
don't set it in your script. The autotools has become more and
more of a moving target...
* man/gerbv.1.in: A bunch of updates, mainly reflecting the new
features.
2004-02-07 Stefan Petersen <spe@stacken.kth.se>
* src/gerbv.c: Save screen.path even when we load a project file.
* src/gerbv.c: Fixed a segmentation fault when I tried to free
an optarg:ed variable.
2004-02-05 Stefan Petersen <spe@stacken.kth.se>
* src/gerbv.c: Dan strikes again. Option -p (with appropriate
error message) added as an alternative to --project.
2004-02-01 Stefan Petersen <spe@stacken.kth.se>
* src/gerbv.c: Patch from Dan causes the "save as..." dialog box
to come up if you try to do a "save" with no current project
file name.
* src/gerbv.c: Yet another patch from Dan to put project filename
in title of window.
2003-12-14 Stefan Petersen <spe@stacken.kth.se>
* configure.in, src/gerbv.c, src/log.c, src/setup.h: It is now
possible to compile gerbv with GTK+ 2.*, at least tested with
2.2.4. There are still some problems, particulary in log.c.
GtkText is deprecated, but I have enabled GTK_ENABLE_BROKEN.
This needs a more permanent solution. This closes Feature
Request #771480, but probably opens up some new ones.
2003-12-10 Stefan Petersen <spe@stacken.kth.se>
* src/gerbv.c: Projects saves and restores background color.
* src/gerbv.c, src/gerbv_screen.h: Added Save Project and handles
if a filename was given, either when loading or a previous save.
2003-12-09 Stefan Petersen <spe@stacken.kth.se>
* configure.in, */Makefile.am: Added a recursive chain of Makefile.am
to be able to run make dist and make distcheck. Proposed by Dan
McMahill. Thanks!
2003-12-07 Stefan Petersen <spe@stacken.kth.se>
* src/gerbv.c, src/project.[hc]: Project now saves ev. inversion of
layer, all layers accept all parameters and commandline switch
--project=<project file> also works.
* src/gerbv.c, src/gerbv_screen.h: Added invert layer functionality.
Closes feature request 777547.
2003-12-06 Stefan Petersen <spe@stacken.kth.se>
* src/gerb_file.[hc]: Added function gerb_find_file.
* src/draw_amacro.c: Forgot to make some internal functions static.
* src/*: Scheme interpreter added to be used by project files as a
start. Also project file handling added. A short description of
the format used in project files also added. A massive commit.
2003-11-22 Stefan Petersen <spe@stacken.kth.se>
* configure.in, acconfig.h: acconfig.h removed and more information
added to configure.in after information in warning messages from
autoheader.
2003-11-13 Stefan Petersen <spe@stacken.kth.se>
* src/export_image.c: Changes pixbuf_to_file_as_png simplify operation
No major speedup since that is not the time hog.
-- Release 0.15 --
2003-10-06 Stefan Petersen <spe@stacken.kth.se>
* src/draw_amacro.c: Drawing of aperture macro primitive 7 was
severly broken. Revealed by Drew Moore who sent an example
along. Thanks Drew! Closes bug #818307.
2003-09-28 Stefan Petersen <spe@stacken.kth.se>
* src/gerber.c: Patch from Peter Brueckner. Some Gerbers don't
have G04 but just G4. Peters patch fixes that for G- and M-codes.
2003-09-08 Stefan Petersen <spe@stacken.kth.se>
* src/gerber.c: Patch from Simon Munton to fix a problem with polygons
sometimes not being filled properly. Closes bug #800928 (which
he promptly had submitted).
* src/gerber.c: Another patch from Simon. This time it fixes
circular polygon outlines by with a number of short segments.
Closes bug #603183, which was almost a year old. Thanks Simon!
-- Release 0.14 --
2003-05-31 Stefan Petersen <spe@stacken.kth.se>
* configure.in, src/amacro.c: Removed the last remaining malloc.h
after tips from Charles Lepple on the geda mailinglist.
2003-04-18 Stefan Petersen <spe@stacken.kth.se>
* src/draw_amacro.c: Larry Doolittle had a problem when drawing
one of his files, a circle seemed to explode. I couldn't
reproduce it, but after his tests I added this patch. Thanks Larry!
2003-04-07 Stefan Petersen <spe@stacken.kth.se>
* src/gerber.c: RS274D caused segfaults again. Reported by Skurk.
-- Release 0.13 --
2003-03-16 Stefan Petersen <spe@stacken.kth.se>
* src/draw.c, src/gerb_image.h, src/gerber.c: Angles are now
calculated as doubles instead of ints. For instance, the cslk
example now draws properly at the same time as Dans ridicously
small arcs also works.
* src/gerber.c: Better sanity checks for angles of arcs, so
cw are drawn cw and ccw are drawn ccw. Closes bug #703265
which was reported by Mark Whitis. Thanks!
2003-03-10 Stefan Petersen <spe@stacken.kth.se>
* src/gerber.c: Doesn't warn anymore if a gerber file requests an
image rotate on zero degrees. Reported by Balaji V.
2003-03-02 Stefan Petersen <spe@stacken.kth.se>
* src/draw_amacro.c: Aperture macro primitive 1 is a filled circle.
* Makefile.am, configure.in, src/gerbv.c, src/Makefile.am,
src/gerbv.1.in: Removed all traces of Guile. batch.c is left, but
is not compiled in.
2003-03-01 Stefan Petersen <spe@stacken.kth.se>
* src/gerb_image.[hc], gerber.c: Redesigned step-and-repeat
parser. And when I was at it I also cleaned up new_gerb_image()
a bit.
2003-02-24 Stefan Petersen <spe@stacken.kth.se>
* src/Makefile.am,src/gerbv.c,src/gerbv_screen.h,src/log.c,
src/setup.[hc]: Added setup to handle all things that can
be setup by commandline or (future) rc files. We have the
screen variable, but some didn't think it was appropriate
to add setup things to.
2003-02-22 Stefan Petersen <spe@stacken.kth.se>
* src/gerber.c: Changed comparision if two angles are equal
to double since Dan McMahill discovered a case where the difference
between the angles were actually less than 0.5 degrees.
Closes bug #689663.
* src/gerbv.c: I you tried to swap layer with an unused layer
gerbv segfaulted. Also discovered by Dan McMahill. Cudos to him
as usual... Closes bug #689667.
2003-02-12 Stefan Petersen <spe@stacken.kth.se>
* src/gerber.c: A patch from Peter Monta for incremental
coordinates. He also discovered that I had made a mistake
when parsing incremental/absolute coordinates.
-- Release 0.12 --
2003-02-06 Stefan Petersen <spe@stacken.kth.se>
* src/drill.c; Exchanged the last fprintf(stderr, with
GERB_COMPILE_ERROR.
* src/gerbv.c: Added swap of tooltips information too.
2003-02-02 Stefan Petersen <spe@stacken.kth.se>
* src/drill.c: Added patch from Dan McMahill since + sign
before coordinates seemed to confuse the drill parser.
Closes bug #678407.
* src/gerbv.c: Now you can move around layers in the right
sidebar so you can select in which order the layers should
be presented.
* src/draw.c, src/drill.c, src/gerb_image.[hc], src/gerber.c:
A new system to keep track of mm and inches. Everything is
still drawn based on inches and min/max is also stored as
inches. But now every aperture and every coordinate has a
unit attached to it that is used when drawing. I hope I
haven't breaked anything, patricular in drill.c. And I have
very few (one) reference examples in millimeters.
2003-01-26 Stefan Petersen <spe@stacken.kth.se>
* src/log.[hc], src/gerbv.c: Made sure error messages are
directed to the right place (shell and popup) at the
right moment and that the error messages look nicer.
* .cvsignore, man/.cvsignore, scheme/.cvsignore, src/.cvsignore:
Added these files submitted by Holger Waechtler. Thanks!
2003-01-25 Stefan Petersen <spe@stacken.kth.se>
* src/gerber.c, src/gerb_image.[hc]: Added a patch from
Holger Waechtler regarding G70/G71 which opened up a whole
can of worms. After thinking and hacking the following works:
* all in inches (as always).
* apertures in inches and vectors in millimeters.
The reason for not fixing apertures in millimeter are because
the calculation must happen in the drawing engine, since we
don't know until the moment of drawing if the paramters defines
a length or an angle. It's probably just a matter of fixing the
scaling when drawing, but I fix that later on.
2003-01-19 Stefan Petersen <spe@stacken.kth.se>
* src/gerber.c: Fixed bug in arc/circle drawing that caused
some odd cases (not noticed so far elsewhere) that made
ccw arcs to be drawn cw. Discovered by Jukka Marin. Thanks.
2003-01-16 Stefan Petersen <spe@stacken.kth.se>
* man/gerbv.1, src/gerbv.c : Updated documentation to reflect
the new log commandline switch.
* files2tag, TODO: Minor documentation updates to reflect
reality.
2003-01-15 Stefan Petersen <spe@stacken.kth.se>
* src/Makefile.am, src/color.c, src/draw.c, src/drill.c,
src/gerber.c, src/gerbv.c, src/gerbv_screen.h. Added are
src/log.[hc], src/gerb_error.h: Finally have managed to
change all error reporting routines so it works with
Dinos log system. Now should all errors and warnings pop up
in an explicit window so it behaves like a proper
X-application. Thanks to Dino I got this fixed. Maybe
all code is not what Dino expected, but anyhow I owe him
a great THANKS. Maybe all compilation errors should have
"return;" after them?
2003-01-14 Stefan Petersen <spe@stacken.kth.se>
* src/gerbv.c: A fix for the previous fix. The previous fix
was not good and had to be redone. now. We check the
parsed image before we put it in use so we don't have to
save alot of thing to be able to back off if error.
2003-01-13 Stefan Petersen <spe@stacken.kth.se>
* src/gerbv.c: When gerbv discovered RS274D and terminated
it tried to free memory to hadn't been allocated due to
it had discovered error in the gerber file. This caused
windows to never close and segfaults when terminating.
2002-12-25 Stefan Petersen <spe@stacken.kth.se>
* src/gerbv_screen.h, src/gerbv.c: Changed how the
different windows are stored in the screen struct.
* src/amacro.h: Forgot to include stdlib.h which was needed
to remove warnings regarding free missing.
* src/gerbv.c: Minor beautification cleanups.
2002-12-11 Stefan Petersen <spe@stacken.kth.se>
* src/gerbv.c: Fixed 64-bit compilation warning by casting
gpointer to long int. Closes bug #642703.
2002-12-09 Stefan Petersen <spe@stacken.kth.se>
* src/gerber.c: Fixed some kind of bug causing some filled
polygons not to get displayed. Reported by Chris Ellec.
Closes bug #649663.
2002-12-02 Anders Eriksson <anders@umunet.org>
* configure.in, src/amacro.c: Applied patch from
Charles Lepple to fix bug #646268 (building on MacOS X).
2002-11-26 Anders Eriksson <anders@umunet.org>
* src/gerbv.c: Fixes bug #643799 (zoom out_line stopped
working).
2002-11-26 Stefan Petersen <spe@stacken.kth.se>
* src/gerbv.c: Added idea and (hacked up by me) patch for
turning all layers on and off from Martin Sigrand. It should
really need an overhaul regarding non freed memory.
2002-11-24 Stefan Petersen <spe@stacken.kth.se>
* doc/eagle/*: Added information for Eagle CAD users from
Daniel Dorau. It also made the webpage. Thanks Daniel!
* src/gerber.c: Yet another G-code (55) discovered in an
example in the "standard" by our russian friend Yuri.
2002-11-23 Stefan Petersen <spe@stacken.kth.se>
* src/amacro.c, src/draw.c, src/draw_amacro.c, src/gerber.c:
More files with the same mistake in as below. I cleaned up
my own mess this time.
2002-11-23 Anders Eriksson <anders@umunet.org>
* src/gerbv.c: Fixed bug 642600, Don't use default labels without
any statement after. Also use comments for label after #endif.
-- Release 0.11 --
2002-11-19 Stefan Petersen <spe@stacken.kth.se>
* src/gerbv.c: Anders optimized drawing optimized away setting
of superimpose function. Not any longer. Daniel Dorau pointed
out this and the one below.
* src/draw.c: Hopefully fixed the one pixel gap between lines
when it should be a filled area.
2002-11-17 Stefan Petersen <spe@stacken.kth.se>
* src/exportimage.c: Background color was ignored. Noticed by Dino.
2002-11-16 Stefan Petersen <spe@stacken.kth.se>
* src/gerbv.c: Made sure all cancels and destroy_event from
different popup windows are handled and destroyed properly.
Also made some minor fixes in new "set explicit scale" functions.
* src/gerbv.c: Made explicit set scale also center image properly.
2002-11-15 Stefan Petersen <spe@stacken.kth.se>
* src/gerbv.c: Robustified if someone tries to parse RS274D.
Happend to fix bug #639127.
* doc/PNG-print/*: Added doc on how to print PNGs generated by gerbv.
* src/gerbv.c: Added explicit setting of scale. Good when generating
PNGs for printing. Both patch and above doc is thanks to
Dino Ghilardi.
2002-11-15 Andreas Andersson <e92_aan@e.kth.se>
* src/drill.c: Slight change to allow broken drill files from
Orcad386. Not pretty. But then again, neither is Orcad.
2002-11-07 Anders Eriksson <anders@umunet.org>
* src/gerbv.c: Minor cleanups, prepare idle_redraw to
be reentrant to allow calling it more than once (i.e.
for png export as well as for screen redraw).
2002-11-06 Anders Eriksson <anders@umunet.org>
* src/gerbv.c: Re-read some gtk-docs, we weree mistreating
the gtk_idle-functions. This patch fixes this and closes
pixmap leakage caused by complete redraw when we had a
preempted state.
Oops, you need to start the idle function at least once.
2002-11-05 Anders Eriksson <anders@umunet.org>
* src/gerbv.c, src/gerbv_screen.h: Removed clipping/no
clipping kludge since export_png now behaves as Dino
expects. We should make a function of common code in
export_png and redraw_pixmap to make it more maintainable.
* src/gerbv.c (redraw_pixmap): Don't try to sneak out doing
events from redraw_pixmap, check for them and preempt if
there are events on queue. This closes the everythinh-is-
not-redrawn-sometimes bug (I hope).
2002-11-04 Stefan Petersen <spe@stacken.kth.se>
* src/exportimage.c, gerbv.c: export_png now export whole image
despite whats displayed (still depending on zoom/scale thou).
If export_png receives an imagetosave, that will be the image
that will be saved, so it's more general now. Must hack some
more to be able to utilize both ways. Anders can happily remove
all what he calls kludges.
2002-10-31 Stefan Petersen <spe@stacken.kth.se>
* src/gerber.c: Yet another commando that doesn't complain if
default values are given. AS is the lucky one this time.
* src/gerber.c, src/draw.c: By considering an undefined aperture
despite we didn't draw caused strange lines around the first line
drawn.
2002-10-31 Anders Eriksson <anders@umunet.org>
* src/gerbv.c: Replace incremental redraw with clipping
option. It is now possible to turn clipping off, this
might be useful for export png (sorry for breaking this,
Dino).
2002-10-30 Stefan Petersen <spe@stacken.kth.se>
* src/gerb_image.h, src/gerber.c: Implemented %SF% and %SR% in
parser, but ignored the draw engine. If any of these parameters
not are default a warning is issued. Closed a feature request.
2002-10-30 Anders Eriksson <anders@umunet.org>
* src/gerbv.c, src/gerbv_screen.h: Added restartable
redraw by keeping redraw state between calls to
redraw_pixmap(). Also added drawing status on statusbar.
2002-10-29 Stefan Petersen <spe@stacken.kth.se>
* src/draw_amacro.c: Fixed a bug when drawing primitive 20
discovered by jj. Caused slanted (by coordinates) primitives
to "slant" in the wrong direction.
2002-10-29 Anders Eriksson <anders@umunet.org>
* src/gerbv.c (redraw_pixmap): Free pixmaps also when
preempted, we used to leek pixmaps (bad!).
2002-10-28 Anders Eriksson <anders@umunet.org>
* src/gerbv.c (autoscale): Wrong sign on clip_bbox.x1 from
trans_x. Now even nollezappare is centered correctly.
2002-10-27 Stefan Petersen <spe@>
* src/draw_amacro.c: Reset the stack pointer after each primitive
operation. It's not completly right to do it this way, but since
I built the compiler I know how the code generated looks like ;-).
Closes bug #629101.
2002-10-26 Stefan Petersen <spe@stacken.kth.se>
* src/gerber.c: Removed some nested use of strncmp with simple
switch/case instead in parse_G_code.
* src/gerber.c: Added an extra check so RS274D doesn't casue
segfault. Discovered by Jukka Marin. Thanks.
2002-10-24 Anders Eriksson <anders@umunet.org>
* src/gerbv.c, src/gerbv_screen.h: Played with clipping. Allocated
pixmap is now same size as window. GTK does all clipping (we
could optimize this somewhat with "object" bounding boxes). This
makes it possible to zoom where no gerbv has zoomed before.
Some interesting effects can be found by zooming in a lot.
-- Release 0.0.10 debian release 2 --
2002-10-18 Stefan Petersen <spe@stacken.kth.se>
* src/drill.c, src/gerb_file.[hc], src/gerber.c, src/gerbv.c:
Alot of abuse using EOF(-1) when char actually is unsigned
caused a lot of warnings when Debian build system tried to
build it for a couple of platforms.
2002-10-14 Anders Eriksson <anders@umunet.org>
* src/gerbv.c: Activate millimeters in unit menu if this
is the default unit.
(update_statusbar()): Check that statusbar has been
created before trying to set text to it. This eliminates
an annoying GTK assertion.
-- Release 0.0.10 --
2002-10-13 Stefan Petersen <spe@stacken.kth.se>
* configure.in: Updated version to 0.0.10
2002-10-11 Anders Eriksson <anders@umunet.org>
* configure.in, acconfig.h, src/gerbv.c: Added configure-option
to change default unit for status bar to millimeters instead
of the built-in default of mils.
2002-10-09 Stefan Petersen <spe@stacken.kth.se>
* src/gerber.c: The undefined aperture fix below is, in princip,
only valid if aperture type != from aperture macro.
2002-10-07 Stefan Petersen <spe@stacken.kth.se>
* src/gerber.c: If aperture was undefined (as in polygon outline)
it caused a segfault in min-max routine. Closes bug #619652.
* man/gerbv.1.in: Added blurb about the new command line
switches. Also added some text on backends.
* src/gerbv.c: Added some GDK/GTK specific command line
parameters. Also added the parameter --geometry.
Currently ignoring placement parameters, though I parse them
2002-10-06 Anders Eriksson <anders@umunet.org>
* src/gerbv_screen.h, src/gerbv.c: Added menu selection for
units. Decreased width of status bar. This closes the too
wide window problem in bug #615475. The default minimum
height is still too high to fit in an 800x600 display.
By limiting the number of files to 17 or so this problem
is also solved.
2002-09-29 Anders Eriksson <anders@umunet.org>
* src/gerber.c, src/gerbv.c, src/gerbv_screen.h: Removed last
traces of IMG_EXTRA hack. Now using proper aperture width to
increase width of bounding box. This may give slightly too
big bbox, but it is better than before. I consider this to
close bug #605985.
2002-09-17 Stefan Petersen <spe@stacken.kth.se>
* configure.in: exportpng is configured in default and removed
if asked (--disable-exportpng).
* configure.in, acconfig.h, src/gerbv_screen.h: Setting of MAX_FILES
from ./configure.
2002-09-09 Stefan Petersen <spe@stacken.kth.se>
* src/gerbv.c: Added version number in main windows title.
2002-09-07 Stefan Petersen <spe@stacken.kth.se>
* src/batch.c, src/draw.c, src/gerb_image.h, src/gerber.c,
src/gerber.h: Changed how multiquadrant circles are supported.
Now it's more of a state, before it was considered an interpolation.
Therefore not all multiquadrant circles were detected as such and
got defined wrong. Some parts of the EAGLECAD_KLUDGE was removed,
though EagleCad had some other surprises in store.
* src/amacro.[hc], draw.c, draw_amacro.[hc]: Dynamic allocation
of stack when drawing aperture macros. Closes the evil bug 603147.
2002-09-02 Stefan Petersen <spe@stacken.kth.se>
* src/batch.c, src/draw.c, src/gerb_image.h, src/gerber.c:
Polygon drawing got it's own gc (pgc) since we must have
our own outline pen size. Now we don't have to have an aperture
defined to be able to draw polygon areas. Closes bug 602965.
* Removed PAREA_FILL as an interpolation. Has only PAREA_START
and PAREA_END left so the application has to keep track if it's
in polygon area fill or not by itself. PAREA_FILL was not a
proper "interpolation", it is instead any of the other
interpolations. Closes bug 603146.
2002-09-01 Stefan Petersen <spe@stacken.kth.se>
* src/draw.c: Polygon Area Fill could never have worked at
all since number of points reported to gdk_draw_polygon
always was zero.
2002-08-31 Anders Eriksson <anders@umunet.org>
* src/gerbv.c (redraw_pixmap): Removed redundant bounding
box calculation.
2002-08-27 Anders Eriksson <anders@umunet.org>
* src/gerbv.c, src/gerbv_screen.h, src/gerbv_icon.h: Calculate
proper initial translation when doing autoscale. Center image.
Added #define for extra 0.1 inches in autoscale. New icon image.
Also added outline debugging code (within #ifdef's).
2002-08-27 Andreas Andersson <e92_aan@e.kth.se>
* src/drill.c: Minor change to the drill file format guessing
logic to allow for yet another special case.
2002-08-27 Stefan Petersen <spe@stacken.kth.se>
* src/gerbv.c: Fixed a couple of minor memoryleaks in color
allocation with valgrind after a tips from Anthony J Bybell.
2002-08-10 Stefan Petersen <spe@stacken.kth.se>
* src/gerbv.c, src/Makefile.am, files2tag.txt modified,
src/scm_gerber.[hc] removed, src/batch.[hc] added:
All batch functionality broken out to one place, ie batch.[hc].
2002-08-09 Stefan Petersen <spe@stacken.kth.se>
* src/gerbv.c: Removed two lines causing zoom to stop work
when a non-loaded layer recently had been selected or deselected.
I didn't find a reason for these two lines to be there. Maybe
there was... Closes bug 593109.
* src/gerbv.c, src/gerbv_screen.h, man/gerbv.1.in: Added
activation/deactivation via the keyboard. Closes feature request
593104. Also updated the man page with this info and fixed other
minor stuff.
2002-08-04 Stefan Petersen <spe@stacken.kth.se>
* src/gerbv.c, src/gerbv_screen.h: Added superimposing selectable
function to be used when you put "layer upon layer". I call it
superimposing functions. Hope it's correct english.
* man/gerbv.1.in: Minor layout changes and added part on superimposing
functions.
* src/gerbv.c: Fixed GTK asserts popping up when starting gerbv
without any files loaded.
2002-08-01 Stefan Petersen <spe@stacken.kth.se>
* src/draw.[hc], src/gerbv.c: Changed how layers are created and
stored to be able to be displayed on top of each other. This
is based on a grand idea from Dino Ghilardi.
2002-07-24 Andreas Andersson (e92_aan@e.kth.se)
* src/drill.c: Changed the parser to catch undefined tools
and insert default values. It warns the user, though.
Fixed a slight bug in min/max coordinate finding.
2002-07-16 Stefan Petersen <spe@stacken.kth.se>
* src/gerbv.c: Fixed bug 573016, some gerbers not drawn.
always do fabs on floats not abs.
* src/gerb_image.[hc], gerber.c: Parses and stores %IN%
ie the image name.
2002-07-15 Anders Eriksson <anders@umunet.org>
* src/gerbv.c, src/gerbv_icon.h: Added application icon.
2002-07-13 Stefan Petersen <spe@stacken.kth.se>
* configure.in: Added --with-gtk-config to fit FreeBSD
after patch from Bruno Schwander <bruno@tinkerbox.org>.
* example/ekf/README: Fixed bug 578583 basically saying that
this example shouldn't work.
-- Release 0.0.9 --
2002-07-06 Stefan Petersen <spe@stacken.kth.se>
* configure.in: Updated version to 0.0.9.
* man/gerbv.1.in: Updated man page with new features.
2002-07-05 Anders Eriksson <anders@umunet.org>
* src/gerbv.c: Save a widget by adding a leading space in
statusbar.
2002-07-04 Anders Eriksson <anders@umunet.org>
* src/gerbv.c: Statusbar => Label to allow setting a fixed
width font and thus avoid getting the coordinates to move
as the number of digits change. Moved font names to header
file. We should consider using a rc-file for font names and
colours and stuff.
Made status bar not expandable.
2002-07-02 Anders Eriksson <anders@umunet.org>
* src/gerbv.c, src/gerbv_screen.h: Macrofied coordinate unit
conversions to have the constants in one place. Converted
sprintf()s to safer snprintf()s.
2002-07-01 Anders Eriksson <anders@umunet.org>
* src/gerbv_screen.h: Bounding box needs to be doubles, not
ints.
* src/gerbv.c (motion_notify_event): Finally it seems I got
the absolute coordinates right. Partly closes feature
request 567965 (still need to add error messages and fix
the layout).
* Fixed some of the layout issues. Now uses only one statusbar
widget instead of three. The message is composed from three
strings. Still no error messages.
2002-06-20 Anders Eriksson <anders@umunet.org>
* src/gerbv.c: Mils are 0.001 inch and not 0.01, thanks Dan!
This closes bug #571097.
2002-06-19 Anders Eriksson <anders@umunet.org>
* src/gerbv.c (motion_notify_event): py, not px!
* src/gerbv.c, src/gerbv_screen.h, src/draw.c: Added bounding
box translations to get correct gerber coordinates (second
try, did I make it?).
2002-06-18 Stefan Petersen <spe@stacken.kth.se>
* src/gerbv.c: Added background color selection. Closes feature
request 557365.
2002-06-17 Anders Eriksson <anders@umunet.org>
* src/gerbv_screen.h: added msgid for stausbar.
* src/gerbv.c: Changed coordinate output both in statusbar and
in measure mode. Now using mils and mms as units. Coordinates
are now correct in respect to the gerber coordinate system
(at least that's what I think). Too much information is shown
in the statusbar, we will have to add unit selection (either
mils or mms). Minor layout change for statusbar (I need to
learn gtk layout better!).
2002-06-17 Stefan Petersen <spe@stacken.kth.se>
* src/draw.c: Ignored if lines were using rectangular apertures
to draw. Closes bug 567128.
2002-06-13 Anders Eriksson <anders@umunet.org>
* src/gerbv.c, src/gerbv_screeen.h: Added statusbar, prints cursor
position as well as distance when measuring.
2002-06-12 Stefan Petersen <spe@stacken.kth.se>
* src/gerbv.c: Fixed autoscale() not to translate image out of
window. Happened after fix for negative coordinates. Should
translate image to center of window.
* src/draw.c: Moved setting off err_gc outside loop so it's always
done, even if you don't need it.
2002-06-12 Anders Eriksson <anders@umunet.org>
* src/gerbv.c (draw_zoom_outline): Fix division by zero when
drawing a zoom box with no delta y. Closes bug 567166.
2002-06-11 Stefan Petersen <spe@stacken.kth.se>
* src/gerb_file.c: Changed ENODATA to EIO, which is more portable.
Closes bug 567179.
* src/gerbv.c: It is now possible to draw images with negative
coordinates. Closes bug 548094.
* src/draw.[hc],src/draw-amacro.[hc], src/Makefile.am: Split out
aperture macro stuff from draw.c to a separate file, draw_amacro.c.
* src/draw_amacro.c: Fixed bug when drawing primitive 4 causing
rotation to be wrong. Thanks to Jonas (you know who you are) for
the excellent files.
* src/draw_amacro.c: Changed interpretation of "closed shape" in
primitive 4. If first point is the same as the last point it's
a closed shape, ie filled according to my interpretation. Don't
know if it's a correct interpretation.
2002-06-10 Anders Eriksson <anders@umunet.org>
* src/gerbv.c: Centered outline zoom uses shift instead of control,
use shift before clicking with button three to initiate centered
outline zoom (rm:ed switching between centered and plain outline).
Changed distance output format to add more digits.
2002-06-09 Anders Eriksson <anders@umunet.org>
* src/gerbv.c: Fix actual zoomed area for centered outline zooming.
2002-06-09 Anders Eriksson <anders@umunet.org>
* src/gerbv.c: Set cross hair cursor as soon as shift key is
pressed (in normal mode, i.e. not zoom outline). Added centered
zoom outline mode (closes Feature Request 553452).
2002-06-09 Anders Eriksson <anders@umunet.org>
* src/gerbv.c: Added measure distance color. Added actual zoom
box for zoom outline mode (this shows the area that will
be included when zooming, displayed as dashed lines). Use
cross-hair cursor when measuring distance.
2002-06-08 Anders Eriksson <anders@umunet.org>
* src/gerbv.c (motion_notify_event, expose_event): Don't
redraw entire image when drawing zoom outline and measured
distance. This makes the outline follow much more smoothly.
The side effect in measure mode is that several measures
may be visible simultaneously. I am not sure if this is
a bug or a feature. :)
2002-06-08 Stefan Petersen <spe@stacken.kth.se>
* src/gerbv.c: Setting up a watch while running export_image.
* configure.in: Adding a check for libpng when export_png enabled.
2002-06-07 Anders Eriksson <anders@umunet.org>
* src/gerbv.c (expose_event): Center distance strings properly,
get string height to properly space the two lines independant
of the resolution (dpi). Minor cleanups.
2002-06-07 Stefan Petersen <spe@stacken.kth.se>
* src/draw.c, src/gerb_image.h, src/gerber.c: Now handles
negative layer polarity (%LP%)! After fixing bug 557368
this was simple to add. Tested with files from PCB.
2002-06-06 Stefan Petersen <spe@stacken.kth.se>
* src/gerbv.c, src/gerbv_screen.h: Added "reload files", gerbv
rereads all loaded files and display them. Usefull if you have
an external gerber manipulation tool.
2002-06-06 Anders Eriksson <anders@umunet.org>
* src/gerbv.c, src/gerbv_screen.h: Added a crude measurement tool,
renamed screen.zstart_[xy] since they are now used for measure-
ment also. To use this tool hold down <SHIFT> while pressing
button 1 (the leftmost). This functionality still needs some work.
2002-06-06 Stefan Petersen <spe@stacken.kth.se>
* src/draw.c, src/gerb_image.h, src/gerber.c: Added counting and
storing of number of corners in polygons, so drawing of polygons
can use dynamically allocated memory. Hard coded array size gave
horrible result with submitted file from David Cussans with a lot
of corners in the polygons.
2002-06-05 Stefan Petersen <spe@stacken.kth.se>
* src/gerbv.c: Added check to autoscale so scale don't screw up
everything.
2002-06-02 Stefan Petersen <spe@stacken.kth.se>
* src/gerb_image.h, src/gerber.c: Thanks to Stephen Adam I now know
what %IC??*% means (Input Code) and have added it to the parser.
2002-05-18 Stefan Petersen <spe@stacken.kth.se>
* configure.in, acconfig.h, src/Makefile.am, src/gerbv.c,
src/gerbv_screen.h, src/exportimage.[hc], CONTRIBUTORS:
Added "export image to PNG" contributed by Dino Ghilardi.
Thanks! Currently not default, use --enable-exportpng when
running configure.
2002-05-17 Stefan Petersen <spe@stacken.kth.se>
* src/gerbv.c, src/gerbv_screen.h: Split out the global
screen variable and it's struct to simplify future
split of gerbv.c.
* acconfig.h, configure.in, src/gerbv.c, scm_gerber.c:
Prepared phase out of Guile by changing default to exclude
Guile inclusion.Change flag disable-batch to enable-batch
during configure and changing the variable NO_GUILE to
GUILE_IN_USE.
2002-05-10 Stefan Petersen <spe@stacken.kth.se>
* src/gerb_image.*, src/gerber.*, src/gerbv.c: Moved verify_gerb
to gerb_image and renamed it to gerb_image_verify so drill file
parsing and gerber file parsing could split them. Done after
receiveing Excellon file without drillfile sizes (Innoveda/PADS
Power PCB) from Dino Ghilardi.
* src/gerb_file.c: Improved error reporting.
2002-05-08 Anders Eriksson <anders@umunet.org>
* src/gerbv.c (zoom_outline): Prevent division by zero by
disallowing too small zoom areas in outline mode. Allocate a
separate outline zoom color. Center outline zoom area instead
of using upper left corner as translation points.
2002-05-08 Stefan Petersen <spe@stacken.kth.se>
* INSTALL: Changed gschem->gerbv
* src/gerbv.c: Remember where we loaded file from last time and
start file selection from there.
2002-05-07 Anders Eriksson <anders@umunet.org>
* src/gerbv.c (zoom_outline): Added zoom outline support and
scaled zoom step (zoom 10% of current scale instead of a fixed
number of 10). Some comments in old code. The outline drawing could
probably be optimized quite a bit (it currently piggybacks on the
expose event). With this functionality it is easier to note the
excessive memory usage when zooming in too far.
-- Release 0.0.8 --
2002-05-05 Stefan Petersen <spe@stacken.kth.se>
* configure.in: Updated VERSION.
* src/gerbv.c: If gerbv was started without any files loaded,
the watch mouse pointer was running all the time.
2002-05-03 Anders Eriksson <anders@umunet.org>
* AUTHORS: Corrected my e-mail address
2002-05-02 Anders Eriksson <anders@umunet.org>
* src/gerbv.c: Made redraw_pixmap() and image2pixmap()
interruptible by calling g_main_pending() at regular intervals and
registering an idle function to redraw the pixmap at a later time
if there are pending events to process. This partly fixes 550319.
Also added the event to the data sent to the zoom function since
this allows us to read the mouse position at the event generation
and not at processing time which we used to do (giving a very
confusing behaviour if we can't keep up with events).
2002-05-02 Stefan Petersen <spe@stacken.kth.se>
* src/draw.c: Now ovals are ovals and not ellypses.
Closes bug 548099.
* HACKING, AUTHORS, CONTRIBUTORS: Updated with more authors
and contributors. Also extended HACKING to include ChangeLog
and code format.
* src/gerbv.c: Autoscale is more correct, though not completely
perfect. Closes bug 550795.
2002-04-29 Anders Eriksson <anders@umunet.org>
* src/gerbv.c: Improved zoom. Now zooming around image center when
zooming from menu and around mouse pointer when zooming using the
mouse. There seems to be some (small) rounding error in the
centering code, but it is very small. Closes 548128.
2002-04-27 Stefan Petersen (spe@stacken.kth.se)
* src/gerbv.c: Number constants replaced with an enumeration
type. Also error in zooming comments fixed.
* man/gerbv.1.in: Added blurb about zooming.
* src/gerber.c: Bug 549602 fixed so format statements are
completely handled.
2002-04-27 Stefan Petersen (spe@stacken.kth.se)
* src/gerbv.c: Changed name for all *open* functions to
*load*. Implemented "unload file" in right-click popup,
which closes feature req. 548124.
2002-04-24 Stefan Petersen (spe@stacken.kth.se)
* src/gerb_file.c: Fixed bug causing segfault when opening
empty file (bug 548578).
2002-04-24 Stefan Petersen (spe@stacken.kth.se)
* man/gerbv.1: Removed.
* man/gerbv.1.in: Created, so configure can add version of
gerbv automagically. Also added blurb about right-click thing.
* configure.in: man/gerbv.1 is created from man/gerbv.1.in.
2002-04-24 Stefan Petersen (spe@stacken.kth.se)
* example/orcad/*: Added after submission from and with
permission from Dino Ghilardi.
2002-04-10 Stefan Petersen (spe@stacken.kth.se)
* src/gerber.c: Fixed mq arcs so circles are circles and
and width/height are correctly calculated. Closes bug
#541089. Hopefully.
2002-04-09 Stefan Petersen (spe@stacken.kth.se)
* src/gerber.c: Fixed draw direction of arcs reported in
bug #541089. Not drawn D3 and VR1, and wrong size on some
transistors, still open.
2002-04-03 Stefan Petersen (spe@stacken.kth.se)
* src/gerber.c, src/gerber.h: Fixed some numerical
constants in verify code.
2002-04-03 Stefan Petersen (spe@stacken.kth.se)
* src/gerbv.c: Added color selection on layers.
* TODO: Added zooming and gerber layers.
2002-02-10 Stefan Petersen (spe@stacken.kth.se)
* src/draw.c: Added inclusion of string.h as pointed out by
Dan McMahill.
-- Release 0.0.7 --
2002-02-03 Stefan Petersen (spe@stacken.kth.se)
* src/draw.c: Fixed bugs in drawing primitive 6 and 7 after
verification. The last primitives...
* example/am-test/am-test.gbx: The verification suite for
aperture macros.
2002-01-06 Stefan Petersen (spe@stacken.kth.se)
* src/amacro.c: Parser handles negative immediate values.
* src/draw.c: Load of minor bugfixes after verification like
rotate points in the other direction, line wiidths constant,
wrong indeces.
* src/gerber.c: Rewrote parse_aperture_defintion to handle
aperture defintions without parameters.
2002-01-06 Stefan Petersen (spe@stacken.kth.se)
* src/draw.c: All primitive macros are implemented (though not
completely) and passed the MS-test; they compile. Now it's
verify, verify and verify.
2001-12-31 Stefan Petersen (spe@stacken.kth.se)
* src/draw.c: Started to add functions to be able to draw
aperture macros too. Some aperture macro primitives are
half way implemented, so the examples in the distribution
should work. Though not 100% properly.
2001-12-30 Stefan Petersen (spe@stacken.kth.se)
* src/amacro.[hc]: Added, even though I haven't executed
an aperture macro program yet. But parsing seems stable.
* src/gerb_image.[hc], gerber.c, src/Makefile.am: Calls
and keeps track of parsing of aperture macros.
* doc/aperturemacro.txt: simple text on the "program code"
generated when parsing aperture macros.
2001-12-29 Andreas Andersson (e92_aan@e.kth.se)
* src/gerb_file.c:
Fixed gerb_fgetstring() to not write after the end of the
allocated array.
* src/gerber.c:
Removed small memory leak in parse_aperture_definition()
2001-12-29 Andreas Andersson (e92_aan@e.kth.se)
* src/drill.c:
Autodetection routine changed back to original style to allow
special cases needed with output from some CAD systems.
* src/gerb_file.c:
Error check for mmap() added to stop gerbv from segdumping
when trying to open a directory instead of a file.
2001-12-29 Stefan Petersen (spe@stacken.kth.se)
* src/gerb_file.[hc], src/gerber.c: Added function
gerb_fgetstring and used it.
-- Release 0.0.6 --
2001-12-14 Stefan Petersen (spe@stacken.kth.se)
* src/draw.c : Removed gdk_gc_set_line_attribute when drawing
a point.
* src/gerbv.c: Added autoscaling and autocentering, both as
a menu option (Zoom/Fit) and when loading a file.
2001-12-11 Stefan Petersen (spe@stacken.kth.se)
* src/gerbv.c : Removed prelighting on buttons and changed
the "random function" creating colors. Also fixed "clear
all" remaining after the pan speedup rewrite.
2001-12-10 Stefan Petersen (spe@stacken.kth.se)
* src/gerbv.c : Forgot to check if we had any pixmap to draw.
2001-12-09 Stefan Petersen (spe@stacken.kth.se)
* src/gerber.c: Fixed small bug in min/max calculation
which caused big problems.
* src/gerbv.c: Major rewrite of panning code giving major
improvements in screen update speed.
2001-12-07 Stefan Petersen (spe@stacken.kth.se)
* src/draw.[hc], src/gerbv.c : Pseudo optimized drawing.
* src/gerb_file.c, src/gerbv.c: Fixed bug causing segfault
when file didn't exist (oops) and pushed error messages
out of gerb_file.c. And if a file (of many) given at
commandline doesn't exist, the next file is tried instead
of halting.
2001-12-06 Stefan Petersen (spe@stacken.kth.se)
* src/drill.c, src/gerb_image.c, src/gerber.c, src/gerbv.c:
Exchanged bzero with memset for further portability.
* scheme/Makefile.am: gerb-debug.scm gets installed too.
2001-12-06 Andreas Andersson (e92_aan@e.kth.se)
* src/drill.[hc]:
Very minor change to allow tool number 0.
2001-12-03 Stefan Petersen (spe@stacken.kth.se)
* src/Makefile.am, src/color.c, src/gerber.c, src/scm_gerber.c:
Turned on -Wall and cleaned up after it.
2001-12-03 Stefan Petersen (spe@stacken.kth.se)
* src/drill.h, src/gerber.h, src/gerbv.c:
Fixed bug caused by last minute namechange of
gerb_file.[hc].
* src/gerb_file.[hc]: Added functions gerb_fgetint and
gerb_fgetdouble.
* src/drill.c, src/gerber.c: Utilize the new file read
functions.
2001-12-02 Stefan Petersen (spe@stacken.kth.se)
* src/gerb_file.[hc], src/drill.[hc], src/gerber.[hc], gerbv.c:
Changed method of file IO from fgetc to mmap. Speed increase
up to 3 times noted (loading all of jj's file at ones).
2001-12-02 Stefan Petersen (spe@stacken.kth.se)
* src/drill.c: drill_file_p recoded so it seems to work better.
* src/gerbv.c: Removed and cleaned up "open file" code.
* src/gerbv.c, src/color.c, src/color.h: Fixed the whole mess
with colors. Now colors doesn't set any limits on how many files
you can load. It also checks that you don't give too many files
to the program.
2001-12-02 Andreas Andersson (e92_aan@e.kth.se)
* src/gerbv.c:
Changed radiobuttons to togglebuttons, redraw_pixmap() now shows
all switched on images. Slight changes to the zoom/translate code
(it still doesn't work as intended, though). Added mouse commmands
for zooming without scrollwheel. screen.scale no longer goes down
to 0 when zooming out.
* src/draw.h, src/draw.c:
Floating point calculations that are converted to ints for
display are now rounded to the nearest int rather than always
truncated down (or was it up?) Macro round(x) added to make that
prettier. Removed minor stuff that caused warnings with -Wall
flag to gcc.
2001-11-27 Andreas Andersson (e92_aan@e.kth.se)
* src/gerbv.c:
Added autodetection of file type.
* src/drill.c:
Corrected stupid bug in autodetection.
2001-11-27 Andreas Andersson (e92_aan@e.kth.se)
* src/drill.h, src/drill.c:
Added drill_file_p(); which checks whether a file could
be a drill file or not.
2001-11-26 Stefan Petersen (spe@stacken.kth.se)
* configure.in: Now --data works when running ./configure.
A patch from Wojciech Kazubski <wk@ire.pw.edu.pl>
2001-11-26 Andreas Andersson (e92_aan@e.kth.se)
* src/drill.c:
Coordinate parsing now works on coordinates with decimal points.
More M codes and some G codes recognized. Most importantly
absolute/incremental mode and zero setting could work, though
it hasn't been properly tested yet.
2001-11-23 Stefan Petersen (spe@stacken.kth.se)
* src/gerb_image.h, src/draw.c, src/gerber.c, src/scm_gerber.c:
Are now able to parse and display polyogon area fill codes.
2001-11-21 Andreas Andersson (e92_aan@e.kth.se)
* src/drill.c:
The format guessing code now guesses right for
one more format.
More M codes recognized (and later ignored).
2001-11-20 Stefan Petersen (spe@stacken.kth.se)
* src/scm_gerber.c: Backend didn't receive the last
entry in the netlist due to bad loop constraint.
* src/gerber.c: Made sure angles always are positive when
calculating multi quadrant ones.
* src/gerber.c: Improved error detection by checking that
all part of an image is there.
* src/gerber.c: Fix for EagleCad caused other Gerber files
to fail. Only D-code 1-3 on a line should also be considered
as a change.
2001-11-15 Stefan Petersen (spe@stacken.kth.se)
* src/gerbv.c: Tooltips over radio buttons with name
of loaded file.
-- Release 0.0.5 --
2001-11-14 Stefan Petersen (spe@stacken.kth.se)
* src/gerbv.c: Changed speed key for zooming in to
Alt-O.
* configure.in: Changed version number for release.
2001-11-09 Stefan Petersen (spe@stacken.kth.se)
* src/gerb_image.[hc]: Added.
* src/drill.[hc], src/gerber.[hc], src/scm_gerber.[hc]:
Changed to utilize the new "class", gerb_image.
2001-11-07 Stefan Petersen (spe@stacken.kth.se)
* src/draw.c, src/gerber.c: Implemented multi quadrant arcs.
Calculated with a separate function; should be able to be
combined with single quadrant calculations. Not properly
tested since I need better examples.
2001-11-06 Andreas Andersson (e92_aan@e.kth.se)
* src/drill.h, src/drill.c:
parse_drillfile() now ignores unstandard text in headers.
Also, it now returns the actual unit used (it used to return
the unit of the input file).
Minor fixes, mostly moved stuff around.
2001-11-03 Stefan Petersen (spe@stacken.kth.se)
* src/drill.c, src/scm_gerber.c: Fixed bug causing backend
first not to generate aperture list and then barfing when
trying.
2001-11-03 Stefan Petersen (spe@stacken.kth.se)
* src/gerbv.c: Added command line -d|--drill support
for drill files both in graphical mode and batch mode.
Though are drill file tool/apertures not properly handled
by ->scheme converter.
* man/gerbv.1: Changed man page to reflect the new switches.
2001-11-03 Stefan Petersen (spe@stacken.kth.se)
* src/gerber.[hc]: Cleaned up code after latest hack.
* src/scm_gerber.c: Changed format of list delivered to
the backend; no delta center points. Now it's all calculated
center points and angles.
* scheme/gerb-ps.scm: Accept the new list, but doesn't do anything
with it yet.
2001-11-03 Stefan Petersen (spe@stacken.kth.se)
* src/gerber.c: Inserted check for undefined apertures that
was earlier removed.
2001-11-02 Stefan Petersen (spe@stacken.kth.se)
* src/gerber.h, src/gerber.c, src/draw.c: Now almost
all calculation for circles is done when parsing and
not when (re)drawing.
* src/gerbv.c: Removed two unnecessary defines.
2001-10-31 Stefan Petersen (spe@stacken.kth.se)
* src/gerbv.c: Added zooming with scroll wheel on mouse.
* README: Added info on how to configure XFree86 for scroll mouse.
2001-10-28 Stefan Petersen (spe@stacken.kth.se)
* src/gerber.[hc]: Fixed bug causing parser to reports
points with wrong aperture. Pointed out by Dan Christian.
2001-10-30 Andreas Andersson (e92_aan@e.kth.se)
* src/drill.c, src/gerber.h, src/gerber.c
Moved new_image() to the correct place
2001-10-28 Andreas Andersson (e92_aan@e.kth.se)
* src/Makefile.am
Added drill.c to SOURCES since it seems to work well enough
for some testing.
* src/drill.c
Added an input file format guessing function.
Some kludges to get around scaling problems.
* src/gerbv.c
Separated File/Open command into File/Open Gerber... and
File/Open Drill... Added functions to open drill files.
* src/*.c:
A few speling errors fixed.
2001-10-28 Stefan Petersen (spe@stacken.kth.se)
* src/draw.c, src/gerber.h, src/gerber.c, src/scm_gerber.c:
aperture array is now full size and array index is very
simple.
2001-10-27 Stefan Petersen (spe@stacken.kth.se)
* src/*.[ch]: typedef:ed all internal structs to *_t
-- Release 0.0.4 --
2001-10-27 Stefan Petersen (spe@stacken.kth.se)
* src/gerber.[hc]: EagleCad generates broken Gerber.
I kindly detect and then tries to run as nothing
happened. Disable kludge with commenting out
EAGLECAD_KLUDGE in src/gerber.h.
This was pointed out to me by Dan Christian and
later confirmed by Fredrik Jonsson sent me some
examples. Thanks guys!
* AUTHORS/CONTRIBUTORS: Added latest bunch of contributing
people.
* configure.in: Updated version to 0.0.4 before release.
2001-10-24 Stefan Petersen (spe@stacken.kth.se)
* src/draw.[hc]: Added. Extracted drawing functions from
gerbv.c.
* src/gerbv.c: Removed add drawing functions into draw.c.
Also minor clean ups. Fixed #def's of Guile support.
* src/Makefile.am: Added draw.c as src file.
2001-10-22 Stefan Petersen (spe@stacken.kth.se)
* example/*: Cleaned out numpres.pcb.* to a separate dir
and added a example received from Joachim Jansen on
separate aperture files.
2001-10-21 Stefan Petersen (spe@stacken.kth.se)
* gerbv.c: Changed how cw and ccw is handled when drawing
arcs to avoid swapping of start and stop points.
* gerbv.c: Red dots at "aperture macros wanna-be's" scale
with ordinary scale, so they don't disappear when scaling
around.
2001-10-09 Stefan Petersen (spe@stacken.kth.se)
* gerber.h, gerber.c: Added 'D' as possible Format
Statement after patches from Uwe Bonnes
<bon@elektron.ikp.physik.tu-darmstadt.de>. Thanks!
* scm_gerber.c: Broke out omit_zeros_t to scm type
conversion and added 'explicit to this type.
2001-09-03 Stefan Petersen (spe@stacken.kth.se)
* configure.in: fixed bug when testing for opt_backend_dir
causing configure to fail at least on Solaris.
* INSTALL: updated with info now that automake's in use.
2001-09-02 Stefan Petersen (spe@stacken.kth.se)
* build-release, rebuild-conf: missing files when running
automake are now copied instead of linked. Thanks
Dan <mcmahill@mtl.mit.edu> for reporting this.
2001-08-31 Stefan Petersen (spe@stacken.kth.se)
* Splitted AUTHORS to AUTHORS and CONTRIBUTORS
* src/gerb-ps.scm: removed
* build_release uses anonymous cvs from sourceforge
to build the release.
* src/scm_gerber.c, src/gerbv.c:
Now the scheme backend receives the name of the parsed file
* scheme/gerb-ps.scm: Utilizes the above feature by creating output
filename by prepending input filename with ".ps"
