2008-02-16 Jeffrey Stedfast <fejj@novell.com> * README: Bumped version * configure.in: Bumped version to 2.2.18 2008-03-13 Jeffrey Stedfast <fejj@novell.com> * gmime/gmime-parser.c (parser_construct_message): Changed content_length to an unsigned long rather than unsigned int, fixes bug #521872. Thanks to Pawel Salek for this fix. 2008-03-10 Jeffrey Stedfast <fejj@novell.com> * gmime/gmime-parser.c (parser_scan_mime_part_content): Don't let size go negative. 2008-02-10 Jeffrey Stedfast <fejj@novell.com> * README: Bumped version * configure.in: Bumped version to 2.2.17 2008-02-09 Jeffrey Stedfast <fejj@novell.com> * gmime/gmime-filter-basic.c (filter_filter): Use the new macros defined below. * gmime/gmime-utils.c (rfc2047_encode_word): Use the new macros. * gmime/gmime-utils.h: Added more accurate encoding-length macros for base64, quoted-printable, and uuencode which are try to minimize over-calculating the amount of output data that we need. Also namespaced them. 2008-02-08 Jeffrey Stedfast <fejj@novell.com> * src/uudecode.c (uudecode): Use g_strchomp() on the filename parsed from the 'begin' line. 2008-02-07 Jeffrey Stedfast <fejj@novell.com> * util/url-scanner.c (url_web_end): Handle IP address literals within []'s. Fixes bug #515088. 2008-02-06 Jeffrey Stedfast <fejj@novell.com> * gmime/gmime-utils.c (g_mime_utils_uuencode_step): Optimized. 2008-02-03 Jeffrey Stedfast <fejj@novell.com> * gmime/gmime-stream-cat.c (stream_read): Removed an extra seek. 2008-02-02 Jeffrey Stedfast <fejj@novell.com> * README: Bumped version * configure.in: Bumped version to 2.2.16 2008-02-02 Jeffrey Stedfast <fejj@novell.com> Fix for https://bugzilla.novell.com/show_bug.cgi?id=333292 and some other bugs I discovered while fixing it. * gmime/gmime-parser.c (header_parse): Made an actual function rather than a macro. Don't turn invalid headers into X-Invalid-Headers, just ignore them. Instead of using g_strstrip(), do our own lwsp trimming so we can do it before malloc'ing - this helps reduce memory usage and memmove() processing in g_strstrip(). (parser_step_headers): Validate the header field names as we go so that we can stop when we come to an invalid header in some cases. May now return with 3 states rather than only 1: HEADERS_END (as before), CONTENT (suggesting we've reached body content w/o a blank line to separate it from the headers), and COMPLETE (which suggests that we've reached the next message's From-line). (parser_skip_line): Rearranged a bit: don't fill unless/until we need to. (parser_step): For HEADERS_END state, skip a line and increment state to CONTENT. No-op for CONTENT and COMPLETE states. (parser_scan_message_part): parser_step() can return more than just HEADERS_END on 'success' when starting with HEADERS state, so check for error rather than HEADERS_END. (parser_construct_leaf_part): No need to parser_step() thru header parsing, they should already be parsed by the time we get here. Also, don't call parser_skip_line() directly to skip the blank line between headers and content, use parser_step() to do that for us. (parser_construct_multipart): Same as parser_construct_leaf_part() (found_immediate_boundary): Now takes an 'end' argument so callers can request a check against an end-boundary vs a part boundary. (parser_scan_multipart_subparts): Check for errors with parser_skip_line(). Set HEADERS state and use parser_step() to parse headers rather than calling parser_step_headers() directly. If, after parsing the headers, we are at the next message (aka COMPLETE state) and we have no header list, then break out of our loop and pretend we've found an end-boundary. After parsing the content of each MIME part, check that the boundary we found is our own and not a parent's (if it belongs to a parent, break out). (parser_construct_part): Loop parser_step() until we're at any state past the header block (>= HEADERS_END). (parser_construct_message): Same idea. Also, do error checking for decoded content_length value. 2008-02-02 Jeffrey Stedfast <fejj@novell.com> * gmime/gmime-iconv-utils.c (iconv_utils_init): Don't break if the user's locale is unset (e.g. US-ASCII). 2008-01-31 Jeffrey Stedfast <fejj@novell.com> * gmime/gmime-parser.c: Removed the need for 'unstep' state information. 2008-01-27 Jeffrey Stedfast <fejj@novell.com> * gmime/gmime-stream-buffer.c (stream_write): Don't modify the passed-in arguments so that it makes debugging easier if there's ever a bug. 2008-01-27 Jeffrey Stedfast <fejj@novell.com> * gmime/gmime-stream-buffer.c (stream_read): Optimized the BLOCK_READ code-path. (stream_write): Optimized the BLOCK_WRITE code-path. (stream_seek): Optimized the BLOCK_READ code-path. (g_mime_stream_buffer_gets): Updated for the changes made to the way bufptr is used in the BLOCK_READ case. 2008-01-14 Jeffrey Stedfast <fejj@novell.com> * gmime/gmime-charset.c (g_mime_set_user_charsets): Deep copy the string array. Fixes bug #509434. 2008-01-03 Jeffrey Stedfast <fejj@novell.com> * README: Bumped version * configure.in: Bumped version to 2.2.15 2008-01-02 Jeffrey Stedfast <fejj@novell.com> * gmime/gmime-message.c (message_write_to_stream): Reworked the logic to be easier to understand what is going on. * gmime/gmime-multipart.c (multipart_write_to_stream): In the case where multipart->boundary is NULL /and/ we have a raw header (suggesting a parsed message), do not set a boundary as it will break the output because it will clobber the saved raw header and GMimeMessage's write_to_stream() method will have skipped writing its own headers if its toplevel part (us) have a raw header set. In this case, also skip writing the end boundary. 2008-01-01 Jeffrey Stedfast <fejj@novell.com> * README: Bumped version * configure.in: Bumped version to 2.2.14 * gmime/gmime-utils.c (g_mime_utils_generate_message_id): Fixed a Free Memory Read access (FMR) by not freeing 'name' before using it's value. Also reworked to take advantage of uname(2) or getdomainname() to get the domain name if available to avoid having to do a DNS lookup. 2007-01-01 Jeffrey Stedfast <fejj@novell.com> * README: Bumped version * configure.in: Bumped version to 2.2.13 2008-01-01 Jeffrey Stedfast <fejj@novell.com> Fixes bug #506701 * gmime/gmime-utils.c (rfc2047_encode_get_rfc822_words): Don't reset the word-type variable as it needs to be preserved when breaking long words. (rfc2047_encode): Switch on word->encoding - if 0, rfc2047 encode as us-ascii. 2007-12-27 Jeffrey Stedfast <fejj@novell.com> * gmime/gmime-utils.c (decode_8bit): Now takes a default_charset argument which we use in place of the locale charet if non-NULL. We also now always include this charset in our list of charsets to check for a best-match (obviously this charset is unlikely to be an exact fit if this function is getting called, so we place it at the end of the list). (rfc2047_decode_word): If given a valid charset in the encoded-word token, always use that for charset conversion to UTF-8 even if it doesn't convert fully. We don't want to fall back to the user's supplied charset list because it may contain iso-8859-1 which will likely always be a 'best-match' charset. 2007-12-26 Jeffrey Stedfast <fejj@novell.com> * gmime/gmime-utils.c (g_mime_utils_decode_8bit): Made public. * gmime/internet-address.c (decode_mailbox): Instead of doing our own thing to convert raw 8bit/multibyte text sequences into UTF-8, use the same function we use in gmime-utils.c's header decoder. 2007-12-25 Jeffrey Stedfast <fejj@novell.com> * gmime/charset-map.c: New source file to generate the charset map (moved out of gmime-charset.c) * gmime/gmime-charset.c (main): Removed. 2007-12-25 Jeffrey Stedfast <fejj@novell.com> * gmime/gmime-charset.c (main): Cleaned up the logic and made it so that we can alias a block to a previous block if the blocks are identical rather than just aliasing when all values in the block are identical. Happens to make no difference in the output, but the logic is now there if that ever changes. 2007-12-24 Jeffrey Stedfast <fejj@novell.com> * gmime/gmime-charset-map-private.h: Regenerated. * gmime/gmime-charset.c (known_iconv_charsets): Map all of the gb2312 aliases to GBK as GBK is a superset of gb2312 (apparently some clients are tagging GBK as gb2312 which is missing some glyphs contained within GBK). (main): Added iso-8859-6 to the table for Arabic support. 2007-12-16 Jeffrey Stedfast <fejj@novell.com> * gmime/gmime-utils.c (decode_8bit): When reallocing our output buffer, we need to update outleft as well. 2007-12-15 Jeffrey Stedfast <fejj@novell.com> * README: Bumped version * configure.in: Bumped version to 2.2.12 2007-12-08 Jeffrey Stedfast <fejj@novell.com> * gmime/gmime-utils.c (rfc2047_encode_merge_rfc822_words): Completely rewritten with new logic which will hopefully group words more logically. 2007-12-08 Jeffrey Stedfast <fejj@novell.com> Fixes bug #498720 * gmime/internet-address.c (internet_address_list_writer): Renamed from the temporary internet_address_list_fold() name. (_internet_address_to_string): New internal function that writes an InternetAddress to a GString, doing proper folding and rfc2047 encoding if requested. (internet_address_to_string): Use the new internal function. * tests/test-mime.c: Added another addrspec test and fixed up some exception strings to be a little more helpful. 2007-12-05 Jeffrey Stedfast <fejj@novell.com> * configure.in: Fixed a bug where explicitly disabling largefile support would add -D_FILE_OFFSET_BITS=no to the compiler CFLAGS. Also added a blaring WARNING when -enable-largefile is passed. 2007-11-23 Jeffrey Stedfast <fejj@novell.com> Attempt at solving bug #498720 for address fields, altho it should probably be made to handle folding single addresses in the case where they are too long to fit within a single line. * gmime/internet-address.c (internet_address_list_fold): New function. * gmime/gmime-message.c (write_structured): Renamed from write_addrspec(). (write_addrspec): New header writer that writes InternetAddressLists in a nicely folded manner. 2007-11-12 Jeffrey Stedfast <fejj@novell.com> * gmime/internet-address.c (internet_address_destroy): No need to check if ia != NULL, we know this is true already. 2007-11-12 Jeffrey Stedfast <fejj@novell.com> * README: Bumped version * configure.in: Bumped version to 2.2.11 * gmime/gmime-utils.c (g_mime_utils_header_decode_text): Fix for bug #485005. 2007-11-06 Jeffrey Stedfast <fejj@novell.com> * gmime/gmime-utils.c (rfc2047_decode_word): If the charset string is empty, default to decode_8bit() and don't try to iconv_open() it. 2007-11-06 Jeffrey Stedfast <fejj@novell.com> * gmime/gmime-utils.c (is_rfc2047_token): Don't assume the charset component of the token is >= 1 char, start checking for a '?' at string index 2. 2007-11-01 Jeffrey Stedfast <fejj@novell.com> * gmime/gmime-gpg-context.c (gpg_ctx_parse_status): Clear any error we may have (bad passwd?) each pass so that we don't try to set an error when one is already set. 2007-10-27 Jeffrey Stedfast <fejj@novell.com> * gmime/gmime-message.c (g_mime_message_set_mime_part): Reset the raw headers of the current top-level MIME part so that if it is being used elsewhere, it won't carry along all the message headers from this message. 2007-10-24 Jeffrey Stedfast <fejj@novell.com> * gmime/gmime-part.c (g_mime_part_encoding_from_string): Handle the value "uuencode" the same as we were handling "x-uuencode". 2007-10-14 Jeffrey Stedfast <fejj@gnome.org> Changed the license to LGPLv2 2007-10-13 Jeffrey Stedfast <fejj@gnome.org> * tests/test-pgp.c (test_export): Skip past the PGP headers so as to avoid comparing the "Version: " headers which might fail if a newer gnupg is used than what created the pgp key originally. 2007-10-13 Jeffrey Stedfast <fejj@gnome.org> * gmime/gmime-filter-html.c: Updated for url-scanner.c symbol changes. * util/url-scanner.[c,h]: Renamed symbols to get rid of the G prefix and marked all symbols for internal linkage. * util/md5-utils.h: Declare symbols as internal. * util/memchunk.h: Here too. * util/cache.h: And here. * util/list.h: Same. 2007-09-25 Joe Shaw <joe@joeshaw.org> * configure.in: Set an AM_CONDITIONAL for whether we are building with large file support. * mono/GMime.metadata.in: Move GMime.metadata to this and change any references of off_t to @off_t_type@, which is substituted with the correct type. This is needed because off_t is converted to an IntPtr by the gtk-sharp binding generator, which is good for 64-bit systems and 32-bit systems without large file support but breaks on 32-bit systems with large file support. * mono/Makefile.am: Generate GMime.metadata from GMime.metadata.in by using sed to replace @off_t_type@ with gint64 on 32-bit systems with large file support and long otherwise. 2007-09-03 Jeffrey Stedfast <fejj@gnome.org> * gmime/gmime-utils.c: Disabled a debug printf. 2007-08-15 Joe Shaw <joe@ximian.com> * mono/DataWrapper.custom: We want to dispose of the GMime stream immediately, since we don't use its managed wrapper except to immediately pass it into the GMime.StreamFilter constructor. 2007-07-21 Jeffrey Stedfast <fejj@gnome.org> * gmime/gmime-iconv-utils.c (g_mime_iconv_strndup): Save errno before resetting the iconv descriptor so that we don't lose the error. 2007-07-19 Jeffrey Stedfast <fejj@gnome.org> * README: Bumped version * configure.in: Bumped version to 2.2.10 * tests/test-mime.c: Added rfc2047_text entries for testing the new workaround support. * gmime/gmime-utils.c (g_mime_utils_header_decode_text): Implemented a conditional workaround for broken rfc2047 encodings. 2007-07-03 Jeffrey Stedfast <fejj@gnome.org> * gmime/gmime-common.c: Removed str[n]casecmp 2007-05-21 Jeffrey Stedfast <fejj@gnome.org> * README: Bumped version * configure.in: Bumped version to 2.2.9 * gmime/gmime-stream-cat.c (stream_substream): Fixed a memory leak by always returning a GMimeStreamCat, even if the source list contains only a single stream (probably better that it work this way anyway for consistency), thanks again to Charles Kerr for finding and presenting a fix for this. Fixes bug #440054. * gmime/gmime-stream-file.c (stream_seek): Oops, fseek() should have been using SEEK_SET, not SEEK_END. Thanks to Charles Kerr for the report and the fix. Fixes bug #439841. 2007-04-25 Jeffrey Stedfast <fejj@gnome.org> * README: Bumped version * configure.in: Bumped version to 2.2.8 * tests/test-pgp.c: Test exporting of keys. * gmime/gmime-utils.c (rfc2047_decode_word): Fixed compile warnings. * gmime/gmime-stream-file.c (stream_reset): Removed an unused variable. * gmime/gmime-charset.c (g_mime_charset_can_encode): s/if (mask->level = 1)/if (mask->level == 1)/ 2007-04-23 Jeffrey Stedfast <fejj@gnome.org> * README: Bumped version * configure.in: Bumped version to 2.2.7 2007-04-14 Jeffrey Stedfast <fejj@gnome.org> * gmime/*.c (g_mime_*_get_type): Set n_preallocs to 0. 2007-04-12 Jeffrey Stedfast <fejj@gnome.org> * gmime/*.c: no need for a second NULL argument to g_object_new() * util/cache.c (cache_new): Change max_size and node_size to be of type size_t. * gmime/gmime-multipart-encrypted.c (g_mime_multipart_encrypted_new): g_object_new() doesn't need a second NULL argument. * gmime/gmime-utils.c (decode_8bit): Close the iconv descriptor and since we are using is_ascii() now, we don't need to use unsigned char *'s. 2007-04-12 Jeffrey Stedfast <fejj@gnome.org> * gmime/gmime-utils.c (decode_8bit): Use is_ascii(). (g_mime_utils_header_decode_text): Same. (g_mime_utils_header_decode_phrase): Here too. * gmime/gen-table.c: Added a is_ascii() macro for use instead of the ctype isascii() so that I don't have to worry about casting. 2007-04-11 Jeffrey Stedfast <fejj@gnome.org> Revision 1119 (previous commit) made the following 2 functions even less attractive than they already were, so I decided to rewrite them especially since it wasn't hard to find a far cleaner approach. * gmime/gmime-utils.c (g_mime_utils_header_decode_text): Rewritten to be cleaner, faster, and more elegant. (g_mime_utils_header_decode_phrase): Same. 2007-04-11 Jeffrey Stedfast <fejj@gnome.org> Fixes for bug #423760 and bug #342196 * gmime/gmime-charset.c (g_mime_charset_can_encode): New convenience function to check whether a length of UTF-8 text can be converted into the specified charset. (g_mime_set_user_charsets): New function allowing an application to provide GMime with a list of user-preferred charsets to use for encoding and decoding headers. (g_mime_user_charsets): New function to get the list of user-preferred charsets. * gmime/gmime-utils.c (decode_8bit): New function to convert arbitrary 8bit text into UTF-8 using the charset list provided by g_mime_user_charsets(). (rfc2047_decode_word): Don't assume that just because the declared charset is UTF-8 that it actually is in UTF-8. (rfc2047_decode_word): If we can't open a converter for the declared charset to UTF-8 or if we can't convert from the declared charset into UTF-8, fall back to using decode_8bit(). (g_mime_utils_header_decode_text): Convert 8bit word tokens into UTF-8 using decode_8bit(). (g_mime_utils_header_decode_phrase): Same. (rfc2047_encode_word): Be a little more efficient about removing '\n' chars... (rfc2047_encode): When encoding a level-2 word cluster, attempt to fit the cluster within a charset provided by g_mime_user_charsets() rather than using GMime's best-fit charset table (unless, of course, it doesn't fit within any of the user-specified charsets). 2007-03-28 Jeffrey Stedfast <fejj@gnome.org> * gmime/gmime-iconv-utils.c (g_mime_iconv_strndup): No need to cast out to a char *, it already is. * gmime/gmime-stream-mem.c (g_mime_stream_mem_set_byte_array): Only free the previous memory buffer if we were the owner. 2007-03-28 Jeffrey Stedfast <fejj@gnome.org> * README: Bumped version * configure.in: Bumped version to 2.2.6 - critical release for the gmime-stream-fs and gmime-stream-file fixes below. * gmime/gmime-stream-filter.c (stream_reset): Try resetting source stream first, this way if that fails we don't reset our state either. * gmime/gmime-stream-fs.c (stream_reset): Same as below. * gmime/gmime-stream-file.c (stream_reset): Make sure to always return 0 or -1, not the value from fseek()ing back to the beginning of the stream (which might not be position 0). 2007-03-27 Jeffrey Stedfast <fejj@gnome.org> * gmime/gmime-gpg-context.c (gpg_ctx_parse_status): If we aren't in a UTF-8 locale, convert status messages into UTF-8 when using the status line in the GError. 2007-03-26 Jeffrey Stedfast <fejj@gnome.org> * gmime/gmime-utils.c (g_mime_utils_8bit_header_decode) (g_mime_utils_8bit_header_encode) (g_mime_utils_8bit_header_encode_phrase): Changed all of these functions to take `const unsigned char *' like they used to. Fixes bug #423147. * gmime/gmime-gpg-context.c (gpg_ctx_new): Initialize flushed and nodata state variables. Thanks to valgrind for finding these... * gmime/gmime-content-type.c (g_mime_content_type_new_from_string): Shouldn't need to g_strstrip() the type, is_ttoken() won't match against lwsp chars. Also, instead of simply scanning past lwsp between some tokens, use decode_lwsp() between *all* tokens so that we handle comments as well (not that there should be any...). * gmime-2.0.pc.in: Got rid of the redundant @LIBS@ which contained the same value as @GMIME_LIBS@. * configure.in: Added configure checks for large file support. 2007-03-26 Jeffrey Stedfast <fejj@gnome.org> * gmime-param.c: #include "gmime-parse-utils.h" and got rid of this file's own decode_lwsp() implementation. * internet-address.c: #include "gmime-parse-utils.h" which is where a bunch of the parser functions have been moved from here. * gmime-utils.c: #include "gmime-parse-utils.h" for decode_lwsp() and decode_domain() (decode_addrspec): Moved here from internet-address.c which had been exporting the symbol previously (so that decode_domain didn't have to be copy/pasted). Now this function can be made static - yay! No more exporting un-namespaced symbols! * gmime/gmime-message.c: #include "gmime-parse-utils.h" for decode_lwsp() * gmime/gmime-parse-utils.[c,h]: New source files containing some parse utility functions that had been copy/pasted between several source files previously. 2007-03-25 Jeffrey Stedfast <fejj@gnome.org> * README: Bumped version * configure.in: Bumped version to 2.2.5 2007-03-25 Jeffrey Stedfast <fejj@gnome.org> * tests/Makefile.am (local-check): Simplified. * tests/test-streams.c: Generate our own test data if we aren't given any. * tests/test-cat.c: Updated for the new Makefile.am rule. * gmime/gmime-stream-mmap.c (stream_length): Fixed to return the correct length when bound_end == -1 but bound_start != 0. Discovered this thanks to my new testsuite. * gmime/internet-address.c (decode_mailbox): If we can't find a local-part and inptr is ',', set *in = inptr; rather than *in = inptr + 1; Discovered this bug thanks to my new testsuite. * tests/test-mime.c: Rewritten to use testsuite library. 2007-03-24 Jeffrey Stedfast <fejj@gnome.org> * tests/Makefile.am (check-local): Rewritten to actually run the automated tests. * tests/test-mbox.c: Rewritten to use testsuite library. * tests/test-pgp.c: Rewritten to use testsuite library. * tests/test-pgpmime.c: Rewritten to use testsuite library. * tests/test-cat.c: Rewritten to use testsuite library. * tests/test-streams.c: Rewritten to use testsuite library. * tests/test-iconv.c: Rewritten to use testsuite library. * tests/testsuite.[c,h]: New automated test-suite helper library. 2007-03-20 Jeffrey Stedfast <fejj@gnome.org> * configure.in: Check for the existance of _timezone and nfds_t. * gmime/gmime-utils.c (mktime_utc): Use _timezone if HAVE__TIMEZONE is set. * gmime/gmime.c (g_mime_init): If HAVE_TIMEZONE or HAVE__TIMEZONE is set, call tzset() to initialise the timezone variable. 2007-03-12 Jeffrey Stedfast <fejj@gnome.org> * gmime/gmime-param.c (decode_param): Instead of only checking that the param value begins with "=?", check if that sequence exists anywhere in the value. Fixes bug #407522. * src/uudecode.c (uudecode): Use a strcmp instead of comparing against a string literal (which was technically correct in this case, but the prettyification would be nice if "-" was specified in argv too). Fixes bug #408613. 2007-03-10 Jeffrey Stedfast <fejj@gnome.org> * gmime/gmime-message.c (g_mime_message_get_all_recipients): New convenience function to get To, Cc, and Bcc recipients all in a single list. 2007-02-19 Jeffrey Stedfast <fejj@gnome.org> * gmime/gmime-message.h: Moved g_mime_message_get_body() into the deprecated block. 2007-02-11 Jeffrey Stedfast <fejj@gnome.org> * gmime/gmime-utils.c: Removed the need for the ctype isblank() function. * gmime/gmime-param.c (decode_int): Need to use (unsigned char *) when passing indexes to ctype functions. 2007-02-10 Jeffrey Stedfast <fejj@gnome.org> * gmime/gmime-charset.c: Changed the names of the charset format macros to coincide with the new names output by iconv-charset.c. (g_mime_charset_iconv_name): Use the new macro names. * iconv-detect.c: Use %u instead of %d, also changed the names of the format #defines that we print out. * gmime/gmime-utils.c (g_mime_utils_quote_string): Optimise a smidgen. (g_mime_utils_unquote_string): Fixed, this wasn't working right... 2007-02-09 Jeffrey Stedfast <fejj@gnome.org> * gmime/gmime-stream-filter.c (stream_write): Instead of comparing the return value of the source stream write() to our input length to write, compare to -1. We can't assume the the value the source stream will return will be what we expected, all we can do is check for error. * gmime/gmime-part.c: Same as below. * gmime/gmime-filter-basic.c: Fixes to signedness compile warnings and updated to reflect gmime-utils.h changes. * gmime/gmime-multipart.c (multipart_set_boundary): Updated to reflect gmime-utils.h changes. * gmime/gmime-stream.c (g_mime_stream_writev): If any of the writes fail, return -1. * gmime/gmime-utils.c: header_encode_*() and header_decode_*() now take const char * rather than const unsigned char * arguments. This has been done in an effort to fix compile warnings about signed vs unsigned char * pointers. The 'save' argument to all of the stream encoders/decoders have been changed to a guint32, again for signed vs unsigned warning fixes. 2007-02-08 Jeffrey Stedfast <fejj@gnome.org> * README: Bumped version * configure.in: Bumped version to 2.2.4 2007-02-06 Jeffrey Stedfast <fejj@gnome.org> Fix for bug #394433 * configure.in: Detect if the system has GNU's getopt implementation available for us to use. * Makefile.am: Don't build our own copy of the GNU getopt library if the system has it available. * src/uuencode.c: If the system has getopt.h, use it instead of our own getopt.h. * src/uudecode.c: If the system has getopt.h, use it instead of our own getopt.h. 2007-02-06 Jeffrey Stedfast <fejj@gnome.org> More fixes on account of my test suite... * tests/test-cat.c (test_cat_substream): end = start + random amount... duh. Fixes a bug where sometimes the end bound was < the start bound. * gmime/gmime-stream-cat.c (stream_substream): Calculate the length of each of the source streams correctly. D'oh. (stream_substream): Fixed the calculation for s->start. (stream_substream): Fixed the s->end calculation for when end within the source stream's bounds. (stream_substream): Keep track of how long our substream is going to be for use with setting absolute bound_end on a multi-stream substream. 2007-02-05 Jeffrey Stedfast <fejj@gnome.org> Fixes on account of the awesome test suite I wrote earlier... still need to fix ::substream() tho (or maybe it's just the test that's broke?). * gmime/gmime-stream-cat.c: Added an id member to struct _cat_node, for use with debugging... (stream_read): Seek in the source stream, don't call Cat::stream_seek() to do it. (stream_seek): Swapped the logic of the "within bounds" check, had it backwards. When seeking past a stream, set the node->position to the length of the stream (technically, it's like we read() thru all that data, right?). Instead of resetting all streams starting at n->next, reset them all starting at current->next... since 'n' technically might be before 'current'. (g_mime_stream_cat_add_source): Assign each node an id for easier debugging... 2007-02-05 Jeffrey Stedfast <fejj@gnome.org> * tests/test-cat.c: The beginnings of a test suite for GMimeStreamCat. * gmime/gmime-stream-cat.c (stream_read): Go to the next stream if nread <= 0, not just nread == 0. 2007-02-04 Jeffrey Stedfast <fejj@gnome.org> * gmime/gmime-stream-mem.c (stream_reset): No longer need to update stream->position. * gmime/gmime-stream-mmap.c (stream_reset): Same g_return_if_fail change. Also don't update stream->position. (stream_seek): Added similar sanity checking/eos resetting as StreamFs code. * gmime/gmime-stream-file.c (stream_read): Style changes. (stream_write): Style changes. (stream_close): Fixed compiler warning. (stream_reset): Changed g_return_if_fail to a true if-then. (stream_seek): Changed to mimic the StreamFs changes. (g_mime_stream_file_new): Similar to fs_new() change. * gmime/gmime-stream-fs.c (stream_close): Loop the close() ourselves. (stream_reset): Changed g_return_if_fail to a true if-then. Also be better about resetting eos. (stream_seek): Rewritten to be more correct/robust (at least I hope). Also properly reset eos when appropriate. (g_mime_stream_fs_new): If lseek() fails, pretend start offset is 0. * gmime/gmime-stream.c (stream_reset): No longer needs to update stream->position. (g_mime_stream_reset): Update stream->position if everything reset smoothly. This is just a convenience change to subclass implementations. * gmime/gmime-stream-cat.c (stream_read): Rewritten. Hopefully correct now? Ugh. We can hope... (stream_write): Fixed to work better. (stream_close): Rewritten. (stream_reset): Rewritten to reset the streams, don't seek. (stream_seek): Rewritten... still not correct, but should be ok assuming our bound_start is 0. (stream_length): Rewritten to not depend on a pre-calculated length value... this Does Not Work (tm) if the source streams are unbound and we've written to them. (stream_substream): Rewritten... because ::seek() is so complex for this type of stream, I've tried to eliminate a lot of the headaches by making substreams only slurp up the streams within the bounds of the start/end requested. If the entire contents within the requested bounds are contained within a single source stream, we return a substream of said source stream instead. (g_mime_stream_cat_add_source): Don't precalculate the length here anymore. * gmime/gmime-stream-buffer.c (stream_read): Fixed to never allow buflen to be negative if the read() of our source stream fails. (stream_close): Handle the case where we've already been closed. (stream_eos): Simplified. (stream_reset): Stylistic changes. (stream_seek): Don't allow seeks under our bound_start. 2007-02-03 Jeffrey Stedfast <fejj@gnome.org> * gmime/gmime-stream-cat.c (stream_flush): Flush all streams up to and including the current stream, not just the current stream. (stream_write): break if we don't write any data to current->stream or get an error so we can try the next stream. * gmime/gmime-stream-file.c (stream_close): Same as below. * gmime/gmime-stream-fs.c (stream_close): Allow closing multiple times... makes this consistant with the other streams. (stream_write): If a system write fails with EFBIG or ENOSPC, set eos to TRUE. 2007-01-20 Jeffrey Stedfast <fejj@gnome.org> * tests/test-streams.c (test_stream_gets): printf formatter fixes. * examples/imap-example.c: #include <glib/gstdio.h>, fixes bug #394434. 2007-01-20 Jeffrey Stedfast <fejj@gnome.org> Fixes bug #394419 * gmime/gmime-filter-charset.c (filter_filter): Do iconv const casting. (filter_complete): Same. 2006-11-02 Jeffrey Stedfast <fejj@novell.com> * gmime/gmime-utils.c (g_mime_utils_header_format_date): Changed the names of the parameters to date and tz_offset to prevent warnings from -Wshadow. * gmime/gmime-filter-html.c (writeln): Fixed another possible buffer overflow condition pointed out by hpj. * gmime/gmime-filter-crlf.c (filter_filter): Fixed a possible buffer overflow condition pointed out by hpj. * gmime/gmime-gpg-context.c (gpg_ctx_op_step): Modified to use poll() rather than select() 2006-09-18 Joe Shaw <joeshaw@novell.com> * mono/Makefile.am: Use SOURCES_XML instead of XML_SOURCES to specify the sources.xml file. XML_SOURCES breaks with newer automakes. 2006-08-29 Pawel Salek <pawsa@theochem.kth.se> * gmime/gmime-message-partial.c: set buf just before use - since the mem stream buffer may get reallocated in the meantime leading to segfaults. 2006-08-29 Jeffrey Stedfast <fejj@novell.com> * gmime/gmime-param.c (decode_quoted_string): Unescape escape sequences. Fixes bug #352771. * gmime/gmime-message.c (g_mime_message_set_subject): Updated the docs. (g_mime_message_get_subject): Same. 2006-08-21 Peter Bloomfield <peterbloomfield@bellsouth.net> * gmime/gmime-utils.c (g_mime_utils_unquote_string): handle an arbitrary sequence of quoted and unquoted sections. 2006-08-02 Jeffrey Stedfast <fejj@novell.com> * README: Bumped version * configure.in: Bumped version to 2.2.3 * gmime/gmime-message.c (process_header): Decode the values for Subject, From, Reply-To so that g_mime_message_get_subject/etc all return decoded strings like they were meant to. 2006-06-23 Jeffrey Stedfast <fejj@novell.com> * gmime/gmime-gpg-context.c (swrite): Use g_build_filename() and g_get_tmp_dir() rather than hard-coding the tmpfile to be in /tmp. 2006-06-23 Jeffrey Stedfast <fejj@novell.com> * gmime/gmime-part.c: Use g_ascii_* versions of str[n]casecmp. * gmime/gmime-parser.c: Use g_ascii_* versions of str[n]casecmp. * gmime/gmime-param.c: Use g_ascii_* versions of str[n]casecmp. * gmime/gmime-multipart-signed.c: Use g_ascii_* versions of str[n]casecmp. * gmime/gmime-multipart-encrypted.c: Use g_ascii_* versions of str[n]casecmp. * gmime/gmime-multipart.c: Use g_ascii_* versions of str[n]casecmp. * gmime/gmime-message-partial.c: Use g_ascii_* versions of str[n]casecmp. * gmime/gmime-message-part.c: Use g_ascii_* versions of str[n]casecmp. * gmime/gmime-message.c: Use g_ascii_* versions of str[n]casecmp. * gmime/gmime-iconv.c (g_mime_iconv_open): Use g_ascii_* versions of str[n]casecmp. * gmime/gmime-header.c (g_mime_header_new): Use g_mime_strcase_[hash,equal] rather than param_[hash,equal] to reuse code. * gmime/gmime-gpg-context.c: Use g_ascii_* versions of str[n]casecmp. * gmime/gmime-filter-enriched.c: Use g_ascii_* versions of str[n]casecmp. * gmime/gmime-disposition.c (g_mime_disposition_add_parameter): Use g_mime_strcase_[hash,equal] rather than param_[hash,equal] to reuse code. (g_mime_disposition_new): Same. (param_equal): Removed. (param_hash): Removed. * gmime/gmime-content-type.c: Use g_ascii_* versions of str[n]casecmp. (g_mime_content_type_new_from_string): Use g_mime_strcase_[hash,equal] rather than param_[hash,equal] to reuse code. (g_mime_content_type_set_parameter): Same. (param_equal): Removed. (param_hash): Removed. * gmime/gmime-charset.c: Use g_ascii_* versions of str[n]casecmp. 2006-06-23 Jeffrey Stedfast <fejj@novell.com> * gmime/gmime-stream-cat.c (stream_seek): Fixed to only seek if necessary and also to use ::reset() if seeking back to the beginning of the stream so that it works for non-seekable streams too. Fixes bug #345503 - again thanks to Charles for reporting this bug. * gmime/gmime-object.c (subtype_bucket_foreach): Fixed to also free the bucket memory. Fixes bug #345768, thanks to Charles Kerr for pointing this out. 2006-06-22 Jeffrey Stedfast <fejj@novell.com> * gmime/gmime-gpg-context.c: Removed #define _POSIX_SOURCE to fix bug #172179. 2006-06-15 Jeffrey Stedfast <fejj@novell.com> * README: Bumped version * configure.in: Bumped version to 2.2.2 2006-06-01 Jeffrey Stedfast <fejj@novell.com> * gmime/gmime-utils.c (parse_broken_date): Fixed to handle MM-DD-YY properly and also to fallback to DD-MM-YY if the first pair of digits isn't within range for a proper month. 2006-05-30 Jeffrey Stedfast <fejj@novell.com> * gmime.h.in: Removed. * gmime.h: Now static, no longer auto-generated. * gmime/gmime.c: Set the gmime_[major,minor,micro]_version variables. (g_mime_check_version): New function to check the required version. * gmime/gmime-stream-fs.c: Implement our own no-op version of fsync() for systems that don't have fsync(). 2006-05-24 Jeffrey Stedfast <fejj@novell.com> * examples/imap-example.c (main): Use g_mkdir() to make this example portable to Win32. 2006-05-01 Jeffrey Stedfast <fejj@novell.com> * gmime/gmime-gpg-context.c (gpg_ctx_parse_status): Handle prompts from GnuPG asking for the user's PIN for their SmartCard. 2006-04-21 Jeffrey Stedfast <fejj@novell.com> * gmime/gmime-stream.h: #include <stdio.h> for SEEK_SET/CUR/END enum values. 2006-03-16 Jeffrey Stedfast <fejj@novell.com> * README: Bumped version * configure.in: Bumped version to 2.2.1 * gmime/gmime-parser.c (parser_step): No-op if we are in an ERROR state. (parser_construct_message): Don't bail if we don't start in state INIT, this is valid. (parser_step_from): We need to bail even if parser_fill() returns > 0 if the line is incomplete (e.g. a forced refill was needed but no additional data could be read). 2006-03-16 Jeffrey Stedfast <fejj@novell.com> * README: Bumped version * configure.in: Bumped version to 2.2.0, it's about time I made a stable release. 2006-03-15 Jeffrey Stedfast <fejj@novell.com> * gmime/gmime-parser.c (parser_step_from): If we fail to find a From line, set an error state. Also fixed the End-Of-Data check to prevent an infinite loop if the stream ends with \n\n. (parser_construct_message): Make sure our state starts off at INIT. Also check for the ERROR state in our parser_step() loop and return NULL if we encounter an error. 2006-03-03 Jeffrey Stedfast <fejj@novell.com> * util/url-scanner.c (g_url_web_end): Allow urls such as "http://www.novell.com./path" (note the '.' before the path component). (g_url_addrspec_start): If the '@' is the first character in the match, then it isn't a valid email address. 2006-01-12 Jeffrey Stedfast <fejj@novell.com> * configure.in: Bumped version to 2.1.19 2006-01-19 Joe Shaw <joeshaw@novell.com> * mono/DataWrapper.custom: We need to manually create a decoding filtering stream and wrap that in a StreamWrapper rather than the DataWrapper's GMimeStream directly, which contains undecoded data. * mono/GMime.metadata: Rename some enum members, add DataWrapper's GMimeStream property and MimePart's ContentObject properties as items which return an owned ref. 2006-01-12 Jeffrey Stedfast <fejj@novell.com> ** made a release of 2.1.18 ** * gmime/gmime-stream-mem.c (g_mime_stream_mem_get_byte_array): Use g_return_val_if_fail() rather than g_return_if_fail() since we need to return NULL on error. 2006-01-09 Joe Shaw <joeshaw@novell.com> * mono/Message.custom: Add a References property. Based on a patch from D Bera <dbera.web@gmail.com> 2006-01-05 Joe Shaw <joeshaw@novell.com> * configure.in: Require gtk-sharp 2.4.0. Set the mono API version to <major>.<minor>.0.<interface>, which initially is set to 2.1.0.0, so that version numbers are handled better with gmime upgrades (and hopefully RPM deps on most distros). Bump version to 2.1.18. * README: Updated version * gmime/gmime-stream-mem.[ch]: Add a g_mime_stream_mem_get_byte_array() method for the mono bindings. * mono/DataWrapper.custom: * mono/Header.custom: * mono/Object.custom: Remove WriteToStream() and replace with a new Stream property which returns a wrapped gmime memory stream. * mono/GMime.metadata: A bunch of metadata fixes, mainly for 64-bit compatibility. gtk-sharp incorrectly maps off_t to size_t, which is an int; it's actually a long, so map it manually ourselves. * mono/ObjectStream.cs: Remove this; it's been replaced by StreamWrapper, which is much more memory efficient. * mono/Stream.custom: Seek() returns a long. Remove the CopyToStream() and WriteToStream() methods, since streams can now just be wrapped with a StreamWrapper. Implement the Read() method, and return a long. * mono/StreamWrapper.cs: Added. Wraps a GMime.Stream in a System.IO.Stream. * mono/gmime-api.raw: Regenerated. 2005-11-14 Jeffrey Stedfast <fejj@novell.com> * gmime/gmime-utils.c (g_mime_references_next): Added for the C# bindings. 2005-10-12 Jeffrey Stedfast <fejj@novell.com> * README: Updated version * configure.in: Bumped version to 2.1.17 * gmime/gmime-message.c (message_get_header): For added convenience, if the requested header is a Content-* header and a top-level MIME part exists, query for the requested header on the top-level MIME part and return the value. * gmime/gmime-parser.c (parser_step_headers): If we weren't able to find the end of the header, save it to our tmp buff before refilling our input buffer and set midline to TRUE. No need to check inptr < inend later because we know it to be true. (parser_step_headers): Append the raw header leftovers in the parser_fill() failure case. 2005-09-27 Jeffrey Stedfast <fejj@novell.com> * gmime/gmime-message-partial.c (g_mime_message_partial_split_message): Reworked the splitting logic to try and split on whole-lines. * gmime/gmime-multipart-signed.c (g_mime_multipart_signed_verify): Return NULL if the number of parts is incorrect. 2005-09-20 Jeffrey Stedfast <fejj@novell.com> * gmime/gmime-message-partial.c (header_copy): Only set the value if the value is non-NULL. Thanks to Peter Bloomfield for this fix. 2005-08-18 Jeffrey Stedfast <fejj@novell.com> * README: Updated version * configure.in: Bumped version to 2.1.16 2005-08-18 Joe Shaw <joeshaw@novell.com> * mono/Makefile.am: Install gmime-api.xml into gapi-2.0 2005-08-17 Joe Shaw <joeshaw@novell.com> * configure.in: Require gtk-sharp 2 for the mono bindings. * mono/GMime.metadata: Rename a few items that the gtk-sharp 2 parser added. * mono/gmime-api.raw: Regengerate this using the gtk-sharp 2 parser. 2005-08-16 Joe Shaw <joeshaw@novell.com> * mono/Makefile.am: libexecdir isn't right; we should be using $prefix/lib instead. 2005-07-12 Jeffrey Stedfast <fejj@novell.com> * mono/Makefile.am: libexecdir fixes by Stanislav * gmime/internet-address.c: Fixes to various functions that used incorrect g_return*_if_fail variants. Thanks to sbrabec@suse.cz 2005-06-23 Jeffrey Stedfast <fejj@novell.com> * gmime/gmime-utils.c (g_mime_utils_header_decode_date): Handle the case where the number of tokens returned from datetok is 0 which can happen if broken software sends an empty Date: header. 2005-06-13 Jeffrey Stedfast <fejj@novell.com> * README: Updated * configure.in: Bumped version to 2.1.15 * gmime/gmime-parser.c (parser_step_headers): Don't check inptr[-1] unless inptr > start 2005-06-10 Joe Shaw <joeshaw@novell.com> * mono/Stream.custom (CopyToStream): Check to see if byte_array.data is IntPtr.Zero and don't try to copy if it is. 2005-06-10 Joe Shaw <joeshaw@novell.com> * mono/DataWrapper.custom: Added. Adds a WriteToStream() overload which takes a System.IO.Stream. * mono/Header.custom: Ditto. * mono/Makefile.am: Add DataWrapper.custom and Header.custom to customs. * mono/Object.custom: Remove the GetData() method... it was rather flawed. WriteToStream() is the right way to go about it now. Add a WriteToStream() overload like DataWrapper and Header. * mono/Stream.custom: Add an internal CopyToStream() method which instantiates a GMime.StreamMem, calls WriteToStream() on it, and then copies the data from the GByteArray into a System.IO.Stream. Also add a WriteToStream() overload like the others. 2005-05-25 Joe Shaw <joeshaw@novell.com> * mono/GMime.metdata: Add a few extra rules since the parser/generator changed how certain types are represented. * mono/InternetAddress.custom: Remove this file, move the code to... * mono/InternetAddressList.cs: ... this file, making it a first-order object. Since it implements IDisposable and people might want to explicitly dispose it. * mono/Message.custom (GetRecipients): Return an InternetAddressList rather than an ICollection, so people can dispose when finished. Also have it always return a valid InternetAddressList, so you don't have to do a null check before a foreach. * mono/Makefile.am: Remove InternetAddress.custom from customs and add InternetAddressList.cs to sources. 2005-05-25 Joe Shaw <joeshaw@novell.com> * gmime/internet-address.c: Add accessor functions internet_address_get_type(), internet_address_get_name(), internet_address_get_addr() and internet_address_get_members() for binding into the Mono bindings. * mono/GMime.metadata: Work around an automatic rename of the gtk-sharp generator of a method named "GetType" to a property named "GType," since this method doesn't return a GType. Rename it to "GetAddressType" which is mapped to an "AddressType" property. * mono/gmime-api.raw: Regenerated. 2005-05-20 Jeffrey Stedfast <fejj@novell.com> * gmime/gmime-utils.c (header_fold): Eat up extraneous whitespace after forcing a fold. 2005-03-30 Tim Mooney <Tim.Mooney@ndsu.edu> * tests/test-stream.c: include <glib.h>, so we can use G_GNUC_FUNCTION and therefore compile with non-gcc compilers. 2005-04-14 Jeffrey Stedfast <fejj@novell.com> * configure.in: Applied patch from mooney@dogbert.cc.ndsu.nodak.edu to not assume that mcs was GNU Mono and to instead verify that it was. Fixes bug #172175. 2005-03-29 Jeffrey Stedfast <fejj@novell.com> * README: Updated. * configure.in: Bumped version to 2.1.14 * gmime/gmime-parser.c (parser_step_headers): If we didn't find EOL for a header, set state based on 'inptr' rather than 'start'. Fixes a bug parsing headers that cross read boundaries (and where headers are longer than the internal read-ahead buffer size). 2005-03-23 Joe Shaw <joeshaw@novell.com> * configure.in: Require gtk-sharp >= 1.0.6 for important memory leak fixes 2005-03-15 Joe Shaw <joeshaw@novell.com> * mono/Makefile.am: Build ObjectStream.cs * mono/ObjectStream.cs: Added. Implements a .net Stream for getting the conents from a GMime.Object. 2005-03-12 Joe Shaw <joeshaw@novell.com> * mono/GMime.metadata: Tag the return values of MessagePart.Message, Message.MimePart, Multipart.GetPart() and Multipart.GetSubpartFromContentId() as "owned", meaning that gtk-sharp should not ref them but take ownership of the single reference that's returned from the underlying C functions. * mono/Message.custom: Don't instantiate InternetAddress objects, just deal with the C APIs directly. This saves us a lot of allocations and fixes a bug in gtk-sharp where opaque objects would leak references. 2005-03-07 Jeffrey Stedfast <fejj@novell.com> * gmime/gmime-header.c (g_mime_header_prepend): New function to prepend a header to the list. 2005-03-07 Jeffrey Stedfast <fejj@novell.com> * README: Updated. * configure.in: Bumped version to 2.1.13 * gmime/gmime-charset.c (g_mime_charset_step): Don't bother with MAX() for cases where we'll just end up setting level to 2. 2005-03-07 Joe Shaw <joeshaw@novell.com> * mono/GMime.metadata: Add the "owned" flag to the return value parameter for ConstructMessage on the GMimeParser, because this method returns a new object with a refcount of 1. The binding needs to take ownership of the object. 2005-02-14 Jeffrey Stedfast <fejj@novell.com> * README: Updated * configure.in: Bumped version to 2.1.12 2005-01-31 Jeffrey Stedfast <fejj@novell.com> * gmime/gmime-utils.c (header_fold): Don't break apart rfc2047 encoded tokens. 2005-01-18 Jeffrey Stedfast <fejj@novell.com> * README: Updated * configure.in: Bumped version to 2.1.11 2005-01-26 Joe Shaw <joeshaw@novell.com> * mono/GMime.metdata: The gtk-sharp generator doesn't handle "const unsigned char *" well, so override those methods in metadata. 2005-01-20 Jeffrey Stedfast <fejj@novell.com> * gmime/gmime-param.c (param_list_format): If folding mode is enabled, terminate the header with a \n. 2005-01-19 Jeffrey Stedfast <fejj@novell.com> * gmime/gmime-part.c (g_mime_part_init): Register a writer for Content-Disposition. * gmime/gmime-object.c (g_mime_object_init): Register a new writer func for Content-Type headers so that we don't accidently fold in the middle of a parameter value. 2005-01-13 Joe Shaw <joeshaw@novell.com> * autogen.sh: Allow automake 1.9 2005-01-11 Jeffrey Stedfast <fejj@novell.com> * README: Updated * configure.in: Bumped version to 2.1.10 2004-12-10 Jeffrey Stedfast <fejj@ximian.com> * gmime/internet-address.c (internet_address_to_string): rfc2047 encode the group name too. 2004-12-08 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-content-type.c (g_mime_content_type_is_type): Fixed to do as advertised - allow wildcard matching for type. 2004-12-06 Joe Shaw <joeshaw@novell.com> * mono/Makefile.am: Add InternetAddress.custom * mono/InternetAddress.custom: Added. Implements a new class which will handle the destroying of InternetAddressLists. Implement ParseString, which basically implements a managed version of internet_address_parse_string. * mono/Message.custom: Use the InternetAddressList for GetRecipients (). 2004-12-01 Joe Shaw <joeshaw@novell.com> * configure.in: Error out if the user explicitly enables the mono bindings and we can't find mcs. * gmime.spec.in: Add support for the mono bindings, placing them in a separate gmime-sharp package. Patch from Ryan Skadberg <skadz@stigmata.org> 2004-11-29 Joe Shaw <joeshaw@novell.com> * mono/AssemblyInfo.cs.in: Add @srcdir@ to AssemblyKeyFile so we build when builddir != srcdir. * mono/Makefile.am: Add gmime-sharp.pub to EXTRA_DIST. 2004-11-27 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-gpg-context.c: #define _POSIX_SOURCE so it compiles on IRIX. * gmime/gmime-multipart-signed.c (multipart_signed_remove_header): Same. * gmime/gmime-multipart-encrypted.c (multipart_encrypted_remove_header): Don't return. 2004-11-19 Joe Shaw <joeshaw@novell.com> * mono/GMime.metadata: Don't autogenerate get GetDate method * mono/Message.custom: Implement it by hand and return a DateTime. 2004-11-17 Joe Shaw <joeshaw@novell.com> * mono/GMime.metadata: More metadata goodness. * mono/Makefile.am: Added Object.custom and Stream.custom. * mono/Object.custom: Add a GetData() method which returns a byte array of the object's data. * mono/Stream.custom: Add a wrapper around Seek() so that you don't need to specify whence. 2004-11-16 Joe Shaw <joeshaw@novell.com> * configure.in: Generate mono/gmime-sharp.pc. * mono/GMime.metadata: Convert all ssize_t and off_t values to ints in C#, since they're not automatically handled by the generator right now. * mono/Makefile.am: Install the gmime-sharp stuff as gmime-sharp and not gmime. * mono/gmime-sharp.pc.in: Added. pkgconfig file for the mono bindings. 2004-11-16 Joe Shaw <joeshaw@novell.com> * Makefile.am: iconv-detect.h should be in DISTCLEANFILES, not CLEANFILES, or else the build fails following a "make clean" unless you re-autogen. * gmime/internet-address.[ch]: Added functions internet_address_list_next() and internet_address_list_get_address() since we can't poke at the structures by hand in mono. * mono/GMime.metadata: Remove a bunch of commented out stuff, hide the entire InternetAddressList structure. We'd prefer to do it with .net datatypes. * mono/Message.custom: Added. Adds a GetRecipients() method which returns an ICollection of InternetAddresses, and a GetRecipientsAsString() method which returns a stringified list for pretty printing. * mono/gmime-api.raw: Regenerate this for the new InternetAddress.GetAddress() and Next() methods. 2004-11-15 Joe Shaw <joeshaw@novell.com> * Added a mono binding * configure.in: Add optional checks for mono and gtk-sharp. * Makefile.am: Build the mono subdir if enabled. * gmime/Makefile.am: Add $(GLIB_LIBS) to the libgmime LIBADD line. * gmime/*.h: Replace GMIME_CHECK macros with the G_TYPE_CHECK ones, because the gtk-sharp binding generator looks for them. * gmime/gmime-type-utils.h: Removed. * mono/AssemblyInfo.cs.in: Added. * mono/sources.xml: Added. The sources file, which tells the generator how to generate the API data. * mono/GMime.metadata: Added. Metadata file used to tweak the generated API. * mono/Global.custom: Added. The g_mime_init() function isn't being wrapped automatically for some reason, so add the code here. * mono/gmime-api.raw: Added. The raw generated API, so that the parser doesn't have to be run by most people. * mono/gmime-sharp.pub: Added. Public key used to sign the assembly. 2004-10-22 Jeffrey Stedfast <fejj@ximian.com> * configure.in: Removed the --enable-ipv6 option. getaddrinfo is now the only way hostname resolution is done. Added checks to see if getaddrinfo requires -lsocket for Solaris boxen. * gmime/gmime-host-utils.[c,h]: Removed * gmime/gmime.h.in: Removed gmime-host-utils.h * gmime/gmime-utils.c (g_mime_utils_generate_message_id): Use getaddrinfo to resolve hostnames, don't bother with the gethostbyname() variants. Makes this code simpler and allows us to get rid of gmime-host-utils.[c,h]. 2004-10-01 Jeffrey Stedfast <fejj@ximian.com> * README: Updated * configure.in: Bumped version to 2.1.9 2004-09-29 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-parser.c (parser_step_headers): Save the entire raw part header as well. (parser_init): Init the rawbuf (will be used for holding the raw part header). (parser_close): Free the rawbuf. (parser_construct_leaf_part): Set the raw header on the mime part. (parser_construct_multipart): Set the raw header on the multipart. (parser_construct_message): Don't use g_mime_message_set_mime_part or we'll end up clearing the raw header that we worked so hard to preserve. (parser_scan_message_part): Same. (parser_scan_multipart_face): Change comparison to >= so that we actually get rid of the last crlf sequence like we meant to. (parser_fill): Get rid of the atleast check (it isn't really needed and can cause breakage). * gmime/gmime-message.c (message_get_headers): Modified to only write part headers if the toplevel mime part contains the raw header. (message_write_to_stream): Same. (g_mime_message_set_mime_part): Clear the raw message headers since it obviously won't contain the raw message headers. (message_add_header): If any message headers change, clear the raw header from the toplebel mime part. (message_set_header): Same. * gmime/gmime-header.c (g_mime_header_set_raw): New function to set the raw part header (to be used in place of our own folding if available). (g_mime_header_has_raw): New function to check if the raw header is available. 2004-09-28 Peter Bloomfield <PeterBloomfield@bellsouth.net> * gmime/gmime-multipart-signed.c (sign_prepare): Must treat multipart/signed and multipart/encrypetd parts as opaque (e.g. don't even attempt to change their encodings). 2004-09-13 Jeffrey Stedfast <fejj@novell.com> * gmime/gmime-message.c (write_addrspec): New folding callback to use on addrspec headers. (g_mime_message_init): Register write_addrspec for all address headers. * gmime/gmime-utils.c (header_fold): Fixed the logic a bit for structured headers such that we don't break long tokens. 2004-08-22 Jeffrey Stedfast <fejj@ximian.com> * README: Updated. * configure.in: Bumped the version to 2.1.8 * gmime/gmime.h.in: #include <gmime/gmime-session-simple.h> for ia64 build fix on Debian (required because of the way gtk-doc's scan program works). * gmime/gmime-filter-enriched.c (enriched_to_html): Don't replace <nofill> with <pre>. Also, replace lone '\n's with a space as suggested by rfc1896. 2004-08-08 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-multipart-encrypted.c (g_mime_multipart_encrypted_encrypt): Don't set encrypted.asc as the filename anymore. * gmime/gmime-multipart-signed.c (g_mime_multipart_signed_sign): Added a hack for Balsa so it can support S/MIME. Also don't set the filename to signature.asc. Balsa maintainers don't want this *shrug*. (g_mime_multipart_signed_verify): Same. These changes really require a design change to CipherContext but that'll have to wait. 2004-08-04 Jeffrey Stedfast <fejj@ximian.com> * configure.in: Changed the iconv-detect logic to not error-out on fail. The code can properly handle the case where iconv-detect.h doesn't exist, so let it do that instead. 2004-07-30 Jeffrey Stedfast <fejj@novell.com> * gmime/gmime-utils.c (rfc2047_encode_get_rfc822_words): Don't use g_unichar_isspace() here, we only want to break 'words' on ascii lwsp. 2004-07-16 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime.c (g_mime_init): Make intialisation ref-counted. (g_mime_shutdown): Updated. 2004-07-06 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-utils.c (rfc2047_encode_get_rfc822_words): Break apart long words so that they we don't generate encoded-word tokens that are >75 chars. Fixes bug #145497. 2004-07-04 Jeffrey Stedfast <fejj@novell.com> * README: Updated. * configure.in: Bumped the version to 2.1.7 * gmime/gmime-parser.c (parser_construct_leaf_part): Removed code to check that the content_type argument is NULL - it can never be NULL. (parser_scan_multipart_face): Fixed a possible buffer-overrun. * gmime/gmime-object.c (process_header): Modified to call g_mime_object_set_content_type() if we got called with a Content-Type header. This way all the ::set_content_type() subclass methods get a chance to update the object's state. (process_header): Return TRUE if we've "processed" the value or FALSE otherwise. (add_header): Only add the header if process_header() didn't do anything with the header. (set_header): Same. * gmime/gmime-message.c (g_mime_message_set_sender): Parse the sender string so we can properly encode it before setting it as the From header. 2004-06-28 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-parser.c (parser_scan_content): Updated to handle crlf sequences. (parser_scan_mime_part_content): Same. (crlf2lf): New function to convert CRLF to LF. (parser_scan_multipart_face): Convert the pre/postface into lf format. 2004-06-27 Jeffrey Stedfast <fejj@novell.com> * util/url-scanner.c (g_url_web_end): Some fixes that I had to do recently for Camel as well. 2004-06-22 Jeffrey Stedfast <fejj@novell.com> * gmime/gmime-parser.c (parser_construct_leaf_part): Only destroy the existing content_type on the object if it is non-NULL. (parser_construct_multipart): Same. 2004-06-15 Jeffrey Stedfast <fejj@ximian.com> * configure.in: Added --enable-profile option and removed --enable-gprof. --enable-profile enables gprof and gcov. * gmime/gmime-parser.c: #include <stdlib.h> for strtoul() (parser_construct_leaf_part): Got rid of an unused variable. * gmime/gmime-param.c (rfc2184_param_new): Got rid of an unused variable. (rfc2184_decode): Got rid of an unused variable. * util/gtrie.c (trie_utf8_getc): Get rid of the unused labels. 2004-06-09 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-stream-filter.c (stream_write): Set flushed to FALSE. (stream_read): Set flushed to FALSE if we end up filtering more data. * gmime/gmime-gpg-context.c (gpg_ctx_parse_status): Record the nodata state. (gpg_verify): Check the nodata state. 2004-06-06 Jeffrey Stedfast <fejj@ximian.com> * README: Updated. * configure.in: Bumped version to 2.1.6 * gmime/gmime-parser.c (parser_construct_multipart): Instead of using g_mime_object_set_content_type(), destroy the current content_type object and set our own on it directly. This prevents the raw Content-Type header value from being overridden by the re-written version from our parsed object. (parser_construct_leaf_part): Same. * gmime/gmime-part.c (mime_part_write_to_stream): Don't sync the GMimeDisposition object to the header here anymore. We want to try and keep the original raw header if this is a parsed message. 2004-06-03 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-part.c (sync_content_disposition): Moved. Also protect against a NULL disposition. (mime_part_write_to_stream): Sync the Content-Disposition header before writing to the stream. * gmime/gmime-utils.c (header_fold): Fixed a folding bug where we could get a blank line (well, wasn't really blank - but we would get a "\n\t\n" sequence which isn't really useful nor desirable). * gmime/gen-table.c: Added a new bit and corresponding macro. * gmime/gmime-table-private.h: Updated. * gmime/gmime-param.c (encode_param): If conversion into the best charset fails, fall back to using UTF-8. Also use the new convenience macro, is_attrchar(), to decide which characters in the param value to encode. (param_list_format): Use is_attrchar() for calculating how many characters we expect to either have to quote or encode. (decode_param_list): Rewritten. 2004-05-31 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-data-wrapper.c (g_mime_data_wrapper_set_stream): Updated gtk-doc comments to note that you'll probably also want to call g_mime_data_wrapper_set_encoding(). 2004-05-26 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-message.c (write_subject): New function. Use unstructured folding rather than the default. (g_mime_message_init): Register the subject header writer. * gmime/gmime-utils.c (g_mime_utils_structured_header_fold): New function (same as g_mime_utils_header_fold() but more appropriately named). (g_mime_utils_unstructured_header_fold): Fold unstructured headers like Subject. (header_fold): Moved all of the g_mime_utils_header_fold() logic into here with a small adjustment to differentiate structured vs unstructured header folding. 2004-05-25 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-param.c (param_list_format): Modified to try and squeeze more characters per line and still keep it under 76 chars per line. 2004-05-24 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-filter-gzip.c (g_mime_filter_gzip_finalize): Call inflateEnd/deflateEnd to fix a memory leak. * gmime/gmime-parser.c (parser_offset): If priv->offset == -1, don't bother doing any pointer arithmetic as it will result in a value that will break certain code (eg. the boundary matching code). 2004-05-20 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-gpg-context.c (gpg_ctx_new): Remember if our environment is in UTF-8 or not. (gpg_ctx_parse_status): Only convert the user name from the locale charset to UTF-8 if the env isn't UTF-8. (gpg_ctx_parse_status): Convert the password to the locale charset if the locale isn't UTF-8. 2004-05-15 Jeffrey Stedfast <fejj@ximian.com> * README: Updated. * configure.in: Bumped version to 2.1.5 * gmime/gmime-multipart-signed.c (g_mime_multipart_signed_verify): Updated. * gmime/gmime-cipher-context.h: Added a new GMimeSignatureValidity which replaces the now deprecated GMimeCipherValidity. Typedef GMimeCipherValidity to GMimeSignatureValidity and wrap deprecated functions with #ifndef GMIME_DISABLE_DEPRECATED. * gmime/gmime-cipher-context.c (g_mime_signature_validity_new): New function. (g_mime_signature_validity_free): New. (g_mime_signature_validity_get_status): New. (g_mime_signature_validity_set_status): New. (g_mime_signature_validity_get_details): New. (g_mime_signature_validity_set_details): New. (g_mime_signature_validity_get_signers): New. (g_mime_signature_validity_add_signer): New. (g_mime_cipher_validity_new): Deprecated. (g_mime_cipher_validity_init): Deprecated. (g_mime_cipher_validity_get_valid): Deprecated. (g_mime_cipher_validity_set_valid): Deprecated. (g_mime_cipher_validity_get_description): Deprecated. (g_mime_cipher_validity_set_description): Deprecated. (g_mime_cipher_validity_clear): Deprecated. (g_mime_cipher_validity_free): Deprecated. (g_mime_signer_new): New function (g_mime_signer_free): New function. * gmime/gmime-gpg-context.c (gpg_ctx_parse_status): Save more state. (gpg_verify): Updated to fill out the new GMimeSignatureValidity structure with more details. 2004-05-15 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-host-utils.h: Wrap inclusion of netdb.h with G_OS_WIN32 * util/memchunk.c (memchunk_alloc): Fixed another cast warning on win32. * gmime/gmime-message.c (g_mime_message_get_mime_part): New function. (g_mime_message_get_body): Fixed a bug where is_html could get set to TRUE even if the part wasn't html. 2004-05-13 Jeffrey Stedfast <fejj@ximian.com> * util/memchunk.c (memchunk_alloc): Add parens to fix casting warning on win32. * gmime/gmime-message.c (write_received): Rewritten. 2004-05-10 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-filter-gzip.c: New filter for compressing/inflating gzip streams. 2004-05-09 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-message.c (write_received): Be careful to never append bytes beyond the end of the header value (eg the nul byte). * gmime/gmime-utils.c (g_mime_utils_header_fold): Don't allow folded headers to end with \n\n. 2004-04-28 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-multipart-encrypted.c (g_mime_multipart_encrypted_decrypt): Reset the stream before trying to parse it. 2004-04-25 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-utils.c (g_mime_utils_header_fold): Rather than always using a tab character when folding, use the lwsp character that we are wrapping at instead. 2004-04-24 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-parser.c (g_mime_parser_init): Initialise respect_content_length. 2004-04-24 Jeffrey Stedfast <fejj@ximian.com> * README: Updated * configure.in: Bumped version to 2.1.4 * gmime/gmime-part.c (g_mime_part_get_content): Disable debug warning. * gmime/gmime-iconv.c: Same. * gmime/gmime-iconv-utils.c: Disable warnings. * gmime/gmime-utils.c (decode_msgid): Try to always return a string buffer containing whatever we can get from the msg-id, even if it isn't a valid msg-id token. 2004-04-19 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-content-type.c (g_mime_content_type_new_from_string): Chew up lwsp between the end of the subtype and the ';' token, if there is any. 2004-04-13 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-gpg-context.c (gpg_ctx_parse_status): Save both the TRUST_UNDEFINED trust state as well as the whether or not we get a NO_PUBKEY status message. 2004-04-11 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-stream-filter.c (stream_read): Check that we haven't already flushed the stream if the source stream is at EOS - fixes an infinite loop case if the user doesn't use a loop to check eos() each loop. 2004-04-02 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-stream-cat.c (stream_write): This should be writing data, not reading it from the underlying streams. Oops. 2004-03-30 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-charset.c (charset_best_mask): Don't use the charset if it is lang specific and the lang doesn't match the locale. Fixes bug #138218. * gmime/gmime-utils.c (mktime_utc): New function to mktime() into UTC. (parse_rfc822_date): Use mktime_utc() instead of doing it ourselves. (parse_broken_date): Same. 2004-03-21 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-stream-buffer.c (stream_write): Fixed a bug when writing across block boundaries. 2004-03-09 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-cipher-context.c (g_mime_cipher_verify): Allow the sigstream to be NULL (it is optional afterall). Thanks to Peter Bloomfield for reminding me about g_ascii_strdown() and g_ascii_strup() and for providing the original patch. * gmime/gmime-charset.c (locale_parse_lang): Don't use g_ascii_strdown() and g_ascii_strup() as these functions strdup the result rather than working on the input string. (g_mime_charset_map_init): Instead of strdup()ing the charset name and then using g_ascii_strdown(), just use g_ascii_strdown() since it malloc's. Also, even if we have nl_langinfo(), we want to parse LC_ALL to get the locale lang. 2004-03-06 Jeffrey Stedfast <fejj@ximian.com> * README: Updated * configure.in: Bumped version to 2.1.3 2004-02-28 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-stream-buffer.c (stream_write): Shrink buflen down by the number of bytes flushed or we'll loop forever writing the same block over and over. * gmime/gmime-strea.[c,h]: Make stream_write() take a const char *buf argument instead of char *buf. * gmime/gmime-stream-*.c (stream_write): constify the buf argument. * gmime/gmime-stream-null.c (stream_write): Count newlines as well. 2004-02-26 Jeffrey Stedfast <fejj@ximian.com> * util/*.[c,h]: Moved here from gmime/ * gmime/*.h: Fixed #includes * gmime/cache.[c,h]: Moved to util/ * gmime/gtrie.[c,h]: Moved to util/ * gmime/list.[c,h]: Moved to util/ * gmime/md5-utils.[c,h]: Moved to util/ * gmime/memchunk.[c,h]: Moved to util/ * gmime/url-scanner.[c,h]: Moved to util/ * gmime/gmime-parser.c: Don't use gobject macro casts. * gmime/gmime-filter-md5.c: Move the MD5Context into a private structure so that we don't need to install md5-utils.h 2004-02-18 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-utils.c (rfc2047_encode): Return a duplicate of the input string if there are no 'words'. * gmime/internet-address.c (internet_address_to_string): Make sure ia->name is not an empty string. 2004-02-13 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-parser.c (parser_construct_multipart): Pop our end boundary before scanning postface text data. Prevents a hang if a multipart brokenly has 2 end boundaries. 2004-02-08 Jeffrey Stedfast <fejj@ximian.com> * gmime/*.c: Use g_object_ref/unref instead of the g_mime_object_ref/unref and g_mime_stream_ref/unref. 2004-02-08 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-utils.c (rfc2047_encode): Changed to take a safemask arg instead of a gboolean phrase arg since we never used 'phrase' directly. (g_mime_utils_header_encode_phrase): Pass IS_PSAFE as second argument. (g_mime_utils_header_encode_text): Pass IS_ESAFE as second argument. 2004-02-07 Jeffrey Stedfast <fejj@ximian.com> * README: Updated. * configure.in: Bumped version to 2.1.2 * examples/README: New README explaining the purpose of each of the example sources. 2004-02-06 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-parser.c (parser_construct_message): If we've been told to respect the Content-Length header, then parse the length value and calculate the offset of the beginning of the next message. (g_mime_parser_get_respect_content_length): New function to get whether we've been told to respect the Content-Length header. (g_mime_parser_set_respect_content_length): New function to set this option. (parser_offset): Now takes a private struct pointer rather than the parser object since it didn't really need it. Also makes it usable from check_boundary(). (g_mime_parser_tell): Updated. (check_boundary): Only scan for end-boundaries if we've reached the projected end-of-content offset as calculated using the Content-Length header. 2004-02-06 Jeffrey Stedfast <fejj@ximian.com> * configure.in: Generate examples/Makefile * gmime/gmime-utils.c (g_mime_utils_generate_message_id): Simplified and updated for g_gethostbyname_r() API changes. * gmime/gmime-error.h: Changed the #define of GMIME_ERROR_QUARK to just be the GQuark variable. Also added GMIME_ERROR_IS_SYSTEM() to decide if an error is a system error (aka errno) or a GMime error. * gmime/gmime.c: Make gmime_error_quark an actual variable and initialise it here. 2004-02-05 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-host-utils.c (g_gethostbyname_r): Replace the herr argument with a GError to make the interface a bit nicer to use. (g_gethostbyaddr_r): Same. * gmime/url-scanner.c: Added single/double quotes to url_braces[] in case the user is quoting the url. (g_url_web_end): Add "-;:" to list of punctuation to strip off the end of urls. Also fixed to handle user@domain's (g_url_addrspec_start): Strip open brace characters from the beginning of the addr. (g_url_web_start): Make sure "www" wasn't part of something not a url (like "Ewww.Gross") by check that pos[-1] is either an open brace or whitespace. (g_url_addrspec_end): Don't allow toplevel domain addr-specs (if we encounter something that looks like it is a toplevel domain addr, it is more likely to be bogus than correct). 2004-02-04 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-stream-buffer.c (g_mime_stream_buffer_gets): Strip off \r too if the stream is in the canonical form. * gmime/gmime.c (g_mime_shutdown): Oops, call g_mime_charset_map_shutdown(), not g_mime_charset_shutdown(). 2004-01-26 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime.c (g_mime_shutdown): New public function to shutdown GMime. Fixes a segfault in applications that dynamically load/unload GMime during execution. * gmime/gmime-iconv.c (g_mime_iconv_init): Don't register an atexit handler. (g_mime_iconv_shutdown): Make public. * gmime/gmime-charset.c (g_mime_charset_map_init): Don't set a g_atexit handler for the shutdown routine. (g_mime_charset_map_shutdown): Make public. 2004-01-25 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-param.c: Disable debugging and conditionally disable warnings. * gmime/gmime-multipart.c: Disable debugging. * gmime/gmime-stream.c: Disable debugging. * gmime/internet-address.c: Same. * gmime/gmime-parser.c: Conditionally disable warnings. 2004-01-19 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-host-utils.c (g_gethostbyaddr_r): Fixed some compile problems in the IPv6 implementation. 2003-12-16 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-stream-mmap.c (g_mime_stream_mmap_new): Don't add getpagesize() to the file length. (g_mime_stream_mmap_new_with_bounds): Same. 2003-12-11 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-gpg-context.c (gpg_ctx_parse_status): Don't immediately prompt for a passwd after receiving the NEED_PASSPHRASE status message. Instead, parse the userid that gpg needs a passwd for and store it on our context. Wait for a GET_HIDDEN status message before prompting, this way if the user has their gpg configured to use gpg-agent, the user won't get 2 passwd prompts. 2003-12-06 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-parser.c (parser_step_headers): If scanning for eoln results in finding inend, request a refill and try again (changed from inptr + 1 >= inend). 2003-12-05 Jeffrey Stedfast <fejj@ximian.com> * gmime/internet-address.c (decode_domain): Make sure domain->len > 0 before checking domain->str[domain->len - 1]. * gmime/gmime-gpg-context.c (gpg_ctx_op_start): Properly set the O_NONBLOCK flag on each of the pipes (ie. we need to get the current flags first and then add the O_NONBLOCK flag rather than just setting the O_NONBLOCK flag by itself). 2003-12-04 Jeffrey Stedfast <fejj@ximian.com> * README: Updated. * configure.in: Bumped version to 2.1.1 2003-12-02 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-gpg-context.c (gpg_ctx_op_start): Modified the code that closes the child's fds to use fcntl and also to start at fd = 3 so as to get rid of the need to check for stdin/out/err. * gmime/gmime-filter-from.c (filter_filter): Fixed to malloc the correct buffer length. 2003-10-28 Pawel Salek <pawsa@theochem.kth.se> * gmime.h.in: Use macros rather than the global variables to prevent compiler warnings. * gmime-error.h: Removed the trailing comma after the last enum value to fix ANSI compile warnings. * gmime-filter-basic.h: Same. * gmime-filter-best.h: Here too. * gmime-filter-crlf.h: And here. * gmime-filter-from.h: Same. * gmime-filter-yenc.h: Again here. * gmime-multipart-encrypted.h: And here. * gmime-multipart-signed.h: Here too. * gmime-stream-buffer.h: Same. * gmime-stream.h: And finally here. 2003-10-08 Jeffrey Stedfast <fejj@ximian.com> * configure.in: Added a check for altzone. * gmime/gmime-utils.c (parse_broken_date, parse_rfc822_date): Account for altzone if the system libc defines it. 2003-09-26 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-host-utils.c (g_gethostbyaddr_r): IPv6 implementation rewritten to use getnameinfo() which is the proper function to use in this case. * gmime/internet-address.c (internet_address_list_length): Changed to take a const argument. (internet_address_to_string): Now takes a const InternetAddress. (internet_address_list_to_string): Now takes a const InternetAddressList. 2003-09-12 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-stream.c (g_mime_stream_read): If len == 0, return 0. (g_mime_stream_write): Same. * gmime/gmime-parser.c (parser_push_boundary): Fix the boundarylenfinal calculation. Thanks to Bart Visscher for catching this mistake. 2003-08-30 Jeffrey Stedfast <fejj@ximian.com> * gmime/md5-utils.c (md5_get_digest_from_file): Open in binary mode, fixes a bug when built on Win32 systems. 2003-08-09 Jeffrey Stedfast <fejj@ximian.com> * README: Bumped to version 2.1.0 * configure.in: Bumped to version 2.1.0 * gmime/gmime-charset.c (g_mime_charset_name): Added back this symbol in order to avoid breaking ABI. (g_mime_charset_locale_name): Same. * gmime/gmime-utils.c (g_mime_utils_generate_message_id): Slight fix for growing the buffer used by g_gethostbyname_r(). 2003-08-09 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime.h.in: Added new headers. * gmime/gmime-utils.c (g_mime_utils_generate_message_id): Use the re-entrant g_gethostbyname_r() function rather than gethostbyname() so that we are threadsafe. * gmime/gmime-host-utils.[c,h]: New source files containing gethostbyname_r() and gethostbyaddr_r() implementations. * gmime/gmime-filter-windows.[c,h]: New source files implementing a windows charset detection filter. * gmime/gmime-charset.c (g_mime_charset_iso_to_windows): New function to return the windows-cp125# equivalent charset for iso-8859-# charsets. * gmime/gmime-parser.c (parser_push_boundary): Soptimise a bit :-) (parser_push_boundary): 2003-08-06 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-multipart.c (g_mime_multipart_foreach): Simplified. * gmime/gmime-stream-cat.c (stream_read): Same here. (stream_write): And finally here. * gmime/gmime-stream-file.c (stream_read): Same. (stream_write): And again... * gmime/gmime-stream-fs.c (stream_read): Here too. (stream_write): And here. * gmime/gmime-stream-mmap.c (stream_read): Same as the mem stream. (stream_write): Same. * gmime/gmime-stream-mem.c (stream_read): Need to fix the MIN expresion so that both args are signed, otherwise 'len' will be the min if the 'bytes-left' calculation is negative. (stream_write): Same. 2003-07-29 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-message.c (g_mime_message_get_recipients): Return const. * gmime/gmime-message-part.c (g_mime_message_part_get_message): Ref the content message before returning it. 2003-07-25 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-multipart.c (g_mime_multipart_foreach): Don't descend recursively... make the user descend into sub-multiparts him/herself. This makes more sense since the callback will be called on the multipart too... (g_mime_multipart_get_subpart_from_content_id): Make checking if the subpart is a multipart more efficient by using GMIME_IS_MULTIPART macro. 2003-07-15 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-charset.c (g_mime_charset_canon_name): Updated to return canonical charset names for windows-cp125x charsets. 2003-06-19 Jeffrey Stedfast <fejj@ximian.com> * README: Added a section for links to language bindings starting with the Perl MIME::Fast modules. * docs/reference/question_index.sgml: Updated docs about the Perl bindings. * docs/tutorial/gmime-tut.sgml: Updated slightly. 2003-06-14 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-parser.c (g_mime_parser_get_persist_stream): New function to get whether or not the parser will attempt to keep the content on disk when it constructs messages. (g_mime_parser_set_persist_stream): New function to set whether or not the above should be done. (parser_scan_mime_part_content): Only load content if persist and seekable are both TRUE. * gmime/gmime-stream-fs.c (g_mime_stream_fs_get_owner): Same idea. (g_mime_stream_fs_set_owner): And here. * gmime/gmime-stream-file.c (g_mime_stream_file_get_owner): New function, just like StreamMem. (g_mime_stream_file_set_owner): Same. * gmime/gmime-stream-mem.c (g_mime_stream_mem_set_owner): New function to set whether or not the memory stream should free the backend memory buffer when finalized. (g_mime_stream_mem_get_owner): New function to get the above attribute. 2003-06-12 Jeffrey Stedfast <fejj@ximian.com> * gmime/gtrie.c (g_trie_free): Free the fail_states array. 2003-05-26 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-common.c (g_mime_strcase_hash): Oops, fixed a bug. * gmime/gmime-multipart-signed.c (g_mime_multipart_signed_verify): Do not strip trailing whitespace when verifying, this should allow us to verify both rfc2015 and rfc3156 signed messages (as well as this being the correct way of doing it anyway). 2003-05-26 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-common.[c,h]: New source files implementing some common routines scattered throughout the gmime sources (currently a strcase_hash and strcase_equal implementation). * gmime/gmime-object.c (type_registry_init): Use the new g_mime_strcase_[hash,equal] functions from gmime-common.h. (g_mime_object_register_type): Here too. * gmime/gmime-filter-enriched.c (g_mime_filter_enriched_class_init): Use the new g_mime_strcase_[hash,equal] functions from gmime-common.h. 2003-05-22 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-parser.c (parser_construct_multipart): Fixed to properly handle multiparts which do not end with their own end-boundary. See bug #113527 for details. 2003-05-22 Jeffrey Stedfast <fejj@ximian.com> * configure.in: Check for sys/param.h * gmime/gmime-stream-mmap.h: Removed sys/mman.h and unistd.h from the #includes. These are needed in the ehader and will break the build on win32. * gmime/gmime-utils.c: Only #include sys/param.h if the system has it. Also added unistd.h and sys/types.h as they should have been there for pid_t. 2003-05-21 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-message.c (handle_multipart_mixed): Don't look at the subtype of the first_type unless we have already defined first_type. Fixes a crash. * gmime/gmime-multipart.c (g_mime_multipart_get_subpart_from_content_id): Don't return a const GMimeObject, ref it to be consistant with the rest of the API. * gmime/gmime-message-partial.c (g_mime_message_partial_split_message): Fixed an optimisation gone bad. Thanks to Piotr Klaban for reporting this. 2003-05-19 Jeffrey Stedfast <fejj@ximian.com> * tests/test-mbox.c: Fixed a memory leak. * gmime/gmime-multipart-encrypted.c: Same as below. * gmime/gmime-multipart-signed.c: Fixed the prototype for write_to_stream(). 2003-05-17 Jeffrey Stedfast <fejj@ximian.com> * docs/reference/streams.sgml: Updated for correctness. * docs/reference/data-wrappers.sgml: Pretty much re-written to better explain GMimeDataWrapper. * gmime/gmime-session-simple.[c,h]: New simple instantiable class implementing the GMimeSession interfaces. 2003-04-30 Jeffrey Stedfast <fejj@ximian.com> * tests/test-mime.c: Fixed some compile warnings. * src/uudecode.c: Fixed some compile warnings. * src/uuencode.c: Fixed some compile warnings. * gmime/gmime-parser.c (parser_scan_content): Initialise 'start'. * gmime/gmime-multipart-signed.c: #include <string.h> * gmime/gmime-message-part.c: #include <string.h> * gmime/gmime-filter-enriched.c: #include <stdlib.h> for strtoul. * gmime/gmime-charset.c (strdown): New function to lowercasify a string inline (rather than being lame and strdup'ing the bloody string like g_ascii_strdown does). * gmime/gmime-iconv.c: Turn off cache debugging. 2003-04-21 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-gpg-context.c (gpg_ctx_new): Initialise seen_eof1 to TRUE. (gpg_ctx_set_ostream): Set seen_eof1 to FALSE here, this way we only ever check for EOF for gpg's stdout if we care about the data received from it. (gpg_ctx_parse_status): Remove the hack that set seen_eof1 to TRUE when we received a TRUST status from gpg when verifying a signature. Same for when importing signatures. (gpg_ctx_op_step): Only FD_SET() fd's that we have not finished reading from. (gpg_ctx_op_exited): #if 0'd for now since we aren't using it anymore. Keeping it around for historical reasons and in case we find we really do need it back. 2003-04-15 Jeffrey Stedfast <fejj@ximian.com> * configure.in: Check for netdb.h, gethostname and gethostbyname. * gmime/gmime-utils.c (g_mime_utils_generate_message_id): Guard against systems without netdb.h, gethostname() and/or gethostbyname(). Seems MingW does not have these things. * gmime/gmime-gpg-context.c (gpg_ctx_get_diagnostics): Flush the diagnostics stream and append a nul-byte. This allows us to return a const char * which will allow us to avoid strdup/free later. (gpg_ctx_free): Unref the diagnostics stream. (gpg_ctx_new): Get the locale charset and setup a charset filter for the diagnostics stream (use a stream instead of a GByteArray like we did before so we can do charset conversion more easily). (gpg_ctx_op_step): Use g_mime_stream_write() to append data to the diagnostics buffer instead of g_byte_array_append() - this way we get some charset filtering action. When reporting errors, use gpg_ctx_get_diagnostics(). Also make the errors reported to the user a little nicer. (gpg_sign): Diagnostics is now const, so don't free the result. (gpg_verify): Same. But also don't exit the main loop when gpg exits - there could still be data in the pipes left to read. (gpg_encrypt): Same as gpg_sign(). (gpg_decrypt): Same here. (gpg_import_keys): Here too. (gpg_export_keys): And here. (gpg_ctx_parse_status): Convert the userid hint to UTF-8. 2003-03-31 Jeffrey Stedfast <fejj@ximian.com> * gmime/*.c: s/g_str[n]casecmp/str[n]casecmp/g * configure.in: Change the check for mmap so that we know we not only have mmap defined, but also that it "works". Also added checks for strcasecmp and strncasecmp and define them to the glib versions if appropriate (g_ascii_str[n]casecmp since g_str[n]casecmp is apparently deprecated *sigh*). Doing this because I don't want to type g_ascii_str[n]casecmp. Call me a lazy bastard, but this is rediculous. * gmime/gmime-filter-enriched.[c,h]: New source files that can be used to convert text/enriched and text/rtf to text/html. 2003-03-31 Jeffrey Stedfast <fejj@ximian.com> * PORTING: Began writing a porting guide for developers porting their applications from GMime 2.0 to GMime 2.2. * gmime/gmime-utils.c (g_mime_utils_8bit_header_encode_phrase): Re-added for binary compatability. At least for now? (g_mime_utils_8bit_header_encode): Same. (g_mime_utils_8bit_header_decode): Here too. 2003-03-30 Jeffrey Stedfast <fejj@ximian.com> * gmime/internet-address.c (internet_address_new_name): Use header_decode_phrase(). (internet_address_new_group): Same. (internet_address_set_name): Again here. (encoded_name): Always use encode_phrase() here if rfc2047_encode is TRUE, even if the raw name contains no 8bit characters. It *should* do the Right Thing (tm) now. * gmime/gmime-param.c (decode_param): Use g_mime_utils_header_decode_text(). * gmime/gmime-message.c (g_mime_message_set_subject): Use g_mime_utils_header_encode_text(). * gmime/gmime-utils.c (g_mime_utils_header_encode_phrase): Renamed. Also rewritten to do the Right Thing (ie. Group 'word's by type and so forth). (g_mime_utils_header_encode_text): Renamed from 8bit_header_encode() to make it clear that this function is meant to encode 'text' fields (see rfc822 for the definition of 'text' and for which headers have text values). Does the same basic thing, but now shares a lot of code with encode_phrase(). (rfc2047_encode_get_rfc822_words): Renamed from rfc2047_encode_phrase_get_words() - also now handles WORD_QSTRING and takes an arg to determine whether or not to allow for QSTRING words. (g_mime_utils_text_is_8bit): Don't go past '\0' if we encounter one before inend. Should allow our caller to cheat and pass in -1 instead of strlen()ing the string if the string is nul-terminated. (g_mime_utils_header_decode_text): Renamed from 8bit_header_decode(). Also made a lot less strict. (g_mime_utils_header_decode_phrase): Basically the same as decode_text() but with the same strictness of previous versions. 2003-03-30 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-message.c (g_mime_message_set_subject): Encode the subject before setting it in the raw header list. * gmime/gmime-header.c (g_mime_header_add): Don't try to encode the header here. This is not our responsibility. (g_mime_header_set): Same. 2003-03-27 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-utils.c (rfc2047_encode_word): Add 1 to enclen so as to protect against buffer overruns. (rfc2047_encode_phrase_get_words): if c > 127 && c < 256, then set encoding to MAX (encoding, 1), not 2. 2003-03-11 Charles Kerr <charles@rebelbase.com> * gmime/md5-utils.c (md5_get_digest_from_file): fix dangling file pointer. 2003-03-09 Jeffrey Stedfast <fejj@ximian.com> * gmime/url-scanner.c (g_url_addrspec_end): Make sure inptr != pos + 1, if it does, then return FALSE. 2003-03-06 Jeffrey Stedfast <fejj@ximian.com> * configure.in: Check that the compiler supports the inline optimisation keyword (or variant) and #define it to 'inline'. * gmime/gtrie.c (trie_utf8_getc): Same. * gmime/gmime-filter-html.c (html_utf8_getc): Use the inline macro. 2003-03-03 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-filter-charset.c (filter_filter): Use outbuf - filter->outbuf to calculate how much data we've written - simpler and less likely to be wrong. (filter_complete): Same. * gmime/gmime-iconv.c: Modified to use the new cache implementation in cache.c * gmime/cache.[c,h]: New source files implementing an LRU cache. * gmime/list.[c,h]: New source files containing a really nice/fast linked-list implementation. 2003-03-02 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-iconv.c (iconv_cache_bucket_new): If the current list of cache buckets is non-NULL, set list->prev to the new bucket being prepended. (g_mime_iconv_open): Only expire unused if the cache size is greater than the max allowable size. 2003-02-27 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-stream-filter.c (stream_read): Set priv->flushed to TRUE if we call g_mime_filter_complete() on our filters. (stream_eos): It's not actually the end of the stream until we've flushed the filters. This fixes some possible truncation when reading from a filtered stream. 2003-02-25 Jeffrey Stedfast <fejj@ximian.com> * README: Bumped version to 2.1.0 * configure.in: Bumped version to 2.1.0 * gmime/gmime-utils.c (rfc2047_decode_word): Use g_mime_locale_charset(). * gmime/gmime-param.c (rfc2184_decode): Use g_mime_locale_charset(). * gmime/gmime-iconv-utils.c (iconv_utils_init): Same as below. Also use g_mime_locale_charset() rather than g_mime_charset_locale_name(). * gmime/gmime-iconv.c (g_mime_iconv_open): Use g_mime_charset_iconv_name() instead of the older deprecated g_mime_charset_name() function. * gmime/gmime-charset.c (g_mime_charset_map_init): Initialize the locale_lang. (g_mime_charset_iconv_name): Renamed from g_mime_charset_name() (g_mime_charset_canon_name): New function which does almost the same thing as g_mime_charset_iconv_name() except that it will always return the canonical forms of the iso-8859 charsets. (g_mime_locale_charset): Renamed from g_mime_charset_locale_name() (g_mime_locale_language): New function to return the user's locale language. (g_mime_charset_language): New function to map charsets to their language code (meant for CJKR). 2003-02-13 Jeffrey Stedfast <fejj@ximian.com> * README: Bumped version to 2.0.2 * configure.in: Bumped version to 2.0.2 * gmime/gmime-parser.c (parser_scan_content): Stop looping if/when we find EOS in all cases. Also handle the case where an [end-]boundary ends an an EOS rather than a new-line. 2003-02-14 Jeffrey Stedfast <fejj@ximian.com> * gmime/url-scanner.c (g_url_file_end): If the file:// url is preceded with some sort of brace, when scanning for the end of the url - take this into consideration. (g_url_web_end): Same. 2003-02-13 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-gpg-context.c: #include <sys/time.h> 2003-02-12 Jeffrey Stedfast <fejj@ximian.com> * gmime/url-scanner.c: Fixed the table to treat >=127 as a CTRL character. * gmime/gtrie.c (trie_utf8_getc): When we encounter an invalid UTF-8 sequence, update in to point to in+1 and return 0xffff. (g_trie_add): Handle invalid UTF-8 sequences (ie, c == 0xffff). (g_trie_search): Same. * gmime/gmime-filter-html.c (html_utf8_getc): Shortcut if inptr == inend by returning 0 and treating it as if we found the terminating nul-char. 2003-02-08 Jeffrey Stedfast <fejj@ximian.com> * configure.in: Bumped the version to 2.0.1 * docs/*: A completely new set of documentation. 2003-02-07 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-multipart.c (multipart_remove_part): When the part being removed is not the first part in the list, make sure to set node->prev->next = node->next -- oops :-) (multipart_remove_part_at): Same. 2003-01-25 Jeffrey Stedfast <fejj@ximian.com> * configure.in: Bumped the version to 2.0.0 * gmime/gmime-filter-html.c (writeln): Read the stream as UTF-8 rather than 8bit so that we can properly write out unicode entities. 2002-12-17 Jeffrey Stedfast <fejj@ximian.com> Build fixes for G_DISABLE_DEPRECATED * gmime/gmime-param.c (encode_param): Replace calls to g_string_sprintfa() with g_string_append_printf() since the former is marked as being deprecated. (param_list_format): Same. * gmime/gmime-utils.c (rfc2047_encode_word): Here too. 2002-12-16 Jeffrey Stedfast <fejj@ximian.com> * configure.in: Bumped the version to 1.90.8 * doc/gmime-doc.sgml: Added a section for GMimeFilterMd5. * doc/gmime-sections.txt: Added a section on GMimeFilterMd5. * tests/test-parser.c (print_mime_struct): Validate Content-Md5 headers. * gmime/gmime-part.c (g_mime_part_set_content_md5): Rewritten to use the md5 filter and also to do things the right way by converting textual parts to their canonical CRLF form. (g_mime_part_verify_content_md5): Same. * gmime/gmime-filter-md5.[c,h]: New filter to compute the md5 digest of a stream passed through it. 2002-12-11 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-message.c (g_mime_message_get_body): Reworked the logic a bit to properly handle multipart/alternative. 2002-12-10 Jeffrey Stedfast <fejj@ximian.com> * configure.in: Bumped the version to 1.90.7 2002-12-09 Jeffrey Stedfast <fejj@ximian.com> * gmime/url-scanner.c: Use our own masking table since we need it atoms to be slightly different. There's a few more chars we want to restrict. Also has the benefit of being easier to split out if someone else wants to use it. (g_url_addrspec_end): Fixed to not be fooled in the case where the address is followed immediately by a period. (g_url_web_end): Made more robust. (g_url_scanner_scan): Oops. We need to set the match->pattern string pointer to the correct pattern before executing the start/end methods (as some of them rely on this info). 2002-12-09 Jeffrey Stedfast <fejj@ximian.com> * gmime/url-scanner.c: Don't need a hash table anymore. (g_url_scanner_add): When adding a pattern to the trie, use the array index as the pattern_id argument. (g_url_scanner_scan): Use the matched_id set by g_trie_search() to lookup the urlpattern_t instead of using a hash table. * gmime/gtrie.c (g_trie_add): Now takes a pattern_id argument so that we can avoid the use of GQuarks and thus save on unecessary memory usage. (g_trie_search): Instead of giving our caller back the pattern string pointer, give him back the pattern id. 2002-12-09 Jeffrey Stedfast <fejj@ximian.com> * gmime/gtrie.c (g_trie_matches): Removed. (g_trie_search): Fixed the FIXME. 2002-12-09 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-filter-html.c: Modified to use url-scanner.c instead of using glibc's regex routines. This has improved performance by ~16.5x not to mention that it is also more accurate than the regex patterns had been (the url scanner can be setup to be much stricter in the matching). * gmime/url-scanner.c: New source file implementing a simple expression scanner meant (currently designed for url matching) which uses gtrie. * gmime/gtrie.c: New source file implementing Aho-Corasick's Trie graph algorithm. 2002-12-08 Jeffrey Stedfast <fejj@ximian.com> Fix for bug #91536 * gmime/gmime-object.c (g_mime_object_register_type): Use a struct to hold the object_type for the subtype hash. 64 archs use 32bit ints and so using GINT_TO_POINTER() and GPOINTER_TO_INT() doesn't work. (g_mime_object_new_type): Get the object_type from the subtype bucket. 2002-12-06 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-stream.c (g_mime_stream_writev): Pointer arithmetic fixes. * gmime/memchunk.c (memchunk_alloc): Pointer arithmetic fixes. 2002-12-03 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-utils.c (datetok): Modified to properly handle when the first char of a token is a special char (such as a '-') that is also used as a token delimiter. 2002-12-02 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-filter-html.c (g_mime_filter_html_init): match REG_ICASE so we don't cut off at the first capital letter, duh. 2002-12-01 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-utils.c: #define _GNU_SOURCE for isblank on GNU systems. * gmime/gmime-gpg-context.c (gpg_ctx_op_wait): Fixed the errno saving. 2002-11-21 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-message.c (write_received): After skipping the special received token and it's value, skip any following comments as well. (skip_addrspec): Skip past the '.' and '@' chars before decoding the next word or domain respectively. 2002-11-20 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-message.c (write_received): New function to nicely format Received headers. (write_msgid): New writer function that doesn't fold the msg-id no matter now long it is. (g_mime_message_init): Override the writer functions for Received and Message-Id headers. Should we also override the writer function for Path headers to not wrap? * gmime/internet-address.c (decode_addrspec): Get rid of an extra call to decode_lwsp that wasn't needed. * gmime/gmime-header.c (g_mime_header_register_writer): Renamed. 2002-11-18 Jeffrey Stedfast <fejj@ximian.com> * configure.in: Make sure to include -liconv on systems that need it. 2002-11-17 Jeffrey Stedfast <fejj@ximian.com> * configure.in: Check for gethostbyname in -lnsl and also bump the version to 1.90.6. * src/getopt*.[c,h]: Added for portability to non-GNU systems. * gmime/gmime-parser.c (g_mime_parser_init): Initialize scan_from and have_regex here instead of in parser_init() since we don't want these flags to be reset when a new stream gets set. (g_mime_parser_new_with_stream): New convenience function. 2002-11-16 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-utils.c (decode_msgid): Eat the '<' before continuing to parse the addr-spec. 2002-11-14 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-content-type.c (g_mime_content_type_new_from_string): #include "gmime-table-private.h" and use is_ttoken() to correctly parse type/subtype. Fixes bug #98463. 2002-11-13 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-gpg-context.c (gpg_ctx_op_start): Don't bother stat()ing gpg->path, if the file doesn't exist, the exec() call will return immediately anyway. 2002-11-13 Jeffrey Stedfast <fejj@ximian.com> * configure.in: Bumped the version to 1.90.5. * gmime/Makefile.am: Remove gmime-exception-list.def from the EXTRAS. 2002-11-12 Jeffrey Stedfast <fejj@ximian.com> * doc/*: Updated. * gmime/gmime-error.h: Added. * gmime/gmime-multipart-encrypted.[c,h]: Use GError instead of GMimeException. * gmime/gmime-multipart-signed.[c,h]: Same. * gmime/gmime-session.[c,h]: Here too. * gmime/gmime-gpg-context.[c,h]: Don't use GMimeException anymore, instead use GError. * gmime/gmime-cipher-context.[c,h]: Same here. * gmime/gmime.h.in: Remove gmime-exception.h and add gmime-error.h 2002-11-09 Jeffrey Stedfast <fejj@ximian.com> * configure.in: Generate src/Makefile. * Makefile.am: Add src to the SUBDIRS. * src/Makefile.am: Build uuencode and uudecode. * src/uuencode.c: New source file emulating GNU shareutils' uuencode. * src/uudecode.c: New source file emulating GNU shareutils' uudecode. 2002-11-07 Jeffrey Stedfast <fejj@ximian.com> * configure.in: Bumped the version to 1.90.4 * PORTING: New document meant to help developers port their applications from gmime-1.0 to gmime-2.0. * iconv-detect.c: Removed unused variables and #include <stdlib.h> * gmime/gmime-multipart.c (g_mime_multipart_get_subpart_from_content_id): Init part to NULL. * gmime/gmime-stream-cat.c (stream_write): Init n to -1 each time through the outer loop. * gmime/gmime-filter-strip.c: #include <string.h> for memcpy. * gmime/gmime-filter-html.c (html_convert): Make sure to initialise depth to 0 each loop so we don't use it uninitialised. 2002-11-07 Jeffrey Stedfast <fejj@ximian.com> * gmime*.[c,h]: Moved to gmime/ subdirectory. Also updated to #include <gmime/some-header.h> instead of #include "some-header.h" * test-*.c: Moved to tests/ subdirectory. 2002-11-06 Jeffrey Stedfast <fejj@ximian.com> * Makefile.am: Install headers to $(includedir)/gmime-2.0/gmime 2002-11-04 Jeffrey Stedfast <fejj@ximian.com> * gmime-filter-basic.c (g_mime_filter_basic_new_type): Set the new->type to type. 2002-11-01 Jeffrey Stedfast <fejj@ximian.com> * gmime.h.in: Wrap in #ifdef __cplusplus * gmime-filter-html.c (html_convert): If flush is TRUE, flush any remaining input rather than backing it up. 2002-10-31 Jeffrey Stedfast <fejj@ximian.com> * gmime-gpg-context.c: Renamed stdin to stdin_fd, stdout to stdout_fd, and stderr to stderr_fd to be more portable. 2002-10-30 Jeffrey Stedfast <fejj@ximian.com> * gmime-filter-html.c (html_convert): Rewrote to use regex for url/addr extraction. Outputs more correct html now too. 2002-10-18 Jeffrey Stedfast <fejj@ximian.com> * gmime-stream-filter.c (stream_read): Change presize from an int to a size_t to fix a 64bit cleanliness bug. (stream_write): Same. 2002-10-14 Jeffrey Stedfast <fejj@ximian.com> * gmime-gpg-context.c (gpg_ctx_get_argv): Setup the import/export command-line. (gpg_ctx_op_step): Handle import/export errors. (gpg_import_keys): Implemented. (gpg_export_keys): Implemented. (gpg_ctx_op_step): Don't do anything with gpg's stdin unless we have something to write to it (exporting keys doesn't require writing to gpg's stdin). 2002-10-13 Jeffrey Stedfast <fejj@ximian.com> * doc/*: Updated. * gmime-utils.c (g_mime_utils_generate_message_id): New function to generate a valid unique message-id string. 2002-10-08 Jeffrey Stedfast <fejj@ximian.com> Fixes to make g_mime_message_partial_split_message() use the correct token as the id parameter. * gmime-object.c (g_mime_object_set_content_id): Same as with GMimeMessage::message_id. (process_header): Same as process_header for gmime-message.c but for content_id. * gmime-message.c (process_header): Set only the addr-spec portion of the msgid. (g_mime_message_set_message_id): Treat the message_id passed in as the addr-spec msgid (ie, as if it didn't contain <>'s). 2002-10-02 Jeffrey Stedfast <fejj@ximian.com> * gmime-gpg-context.c (gpg_import_keys): Renamed. (gpg_export_keys): Renamed. * gmime-cipher-context.c (g_mime_cipher_export_keys): Renamed to be friendlier toward c++. (g_mime_cipher_import_keys): Renamed to be similarly named with the above function. 2002-09-30 Jeffrey Stedfast <fejj@ximian.com> * configure.in: Bumped version. * Makefile.am: Don't install gmime.m4 * gmime.m4: Removed. 2002-09-30 Jeffrey Stedfast <fejj@ximian.com> * gmime-filter-charset.c (filter_filter): Rewritten, don't set errno to 0 before calling iconv (we can't assume that on success errno will not be set?). Also, don't grow the buffer here, save any un-converted text in the backup buffer to be converted next time through. (filter_complete): Pick up the slack of filter_filter by converting anything left over. 2002-09-29 Jeffrey Stedfast <fejj@ximian.com> * gmime-filter[c,h]: Ported to GObject. * gmime-filter-basic.[c,h]: * gmime-filter-best.[c,h]: * gmime-filter-charset.[c,h]: * gmime-filter-crlf.[c,h]: * gmime-filter-from.[c,h]: * gmime-filter-html.[c,h]: * gmime-filter-strip.[c,h]: * gmime-filter-yenc.[c,h]: Ported to the new GMimeFilter. * gmime-data-wrapper.c (write_to_stream): Unref the filter after adding it to the filtered stream. * gmime-multipart-encrypted.c (g_mime_multipart_encrypted_encrypt): Unref the filters once we've added them to the filtered_stream. (g_mime_multipart_encrypted_decrypt): And here. * gmime-multipart-signed.c (g_mime_multipart_signed_sign): Unref the filters once we've added them to the filtered_stream. (g_mime_multipart_signed_verify): Same here. * gmime-part.c (write_content): Unref the filter. (g_mime_part_set_pre_encoded_content): Here too. * gmime-stream-filter.c (g_mime_stream_filter_add): Ref the filter here. (g_mime_stream_filter_remove): Unref the filter. (g_mime_stream_filter_finalize): Unref the filters here. 2002-09-23 Jeffrey Stedfast <fejj@ximian.com> * gmime-filter-charset.c: Try our best to handle EILSEQ (illegal multibyte sequences) by eating the illegal bytes and continuing. This seems to be what users expect (it's what Mozilla seems to do). 2002-09-15 Jeffrey Stedfast <fejj@ximian.com> * gmime-charset.c (g_mime_charset_name): Don't g_assert after using strtoul on the iso charset name, seems that some news clients use 'isolatin' as if it were a real charset (it's not) and we don't want to abort() on this. 2002-09-14 Jeffrey Stedfast <fejj@ximian.com> * doc/*: Updated. * gmime-utils.c (g_mime_utils_decode_message_id): New function to decode a message-id as defined by rfc822. (g_mime_references_decode): New function to decode a references or in-reply-to header. (g_mime_references_append): New function to append a raw message-id to a GMimeReferences list. (g_mime_references_clear): New function to clear a GMimeReferences list. * internet-address.c (decode_addrspec): New function to parse an addr-spec needed by the msg-id decoder. (decode_lwsp): Make public. (decode_word): Same. 2002-09-08 Jeffrey Stedfast <fejj@ximian.com> * gmime-utils.c (parse_broken_date): Wrap printfs in d() to prevent them from printing anything unless debugging is turned on. 2002-09-03 Jeffrey Stedfast <fejj@ximian.com> * gmime-utils.c (get_tzone): Fixed to not get false positives when the token is shorter than the actual timezone string (but matches the first little bit of it). 2002-09-03 Tomasz K³oczko <kloczek@pld.org.pl> * Makefile.am: fixes for automake >= 1.5 (removed duplicated variables) and few minor cleanups and better method for install gmime aclocal macros. * doc/Makefile.am: fixes for "make install DESTDIR=</install/prefix>". 2002-09-01 Jeffrey Stedfast <fejj@ximian.com> * internet-address.c (decode_mailbox): When erroring out due to no local part in the add-spec, set *in to inptr + 1 so we don't get into an infinite loop. * gmime-message-part.c (message_part_remove_header): Same as below. * gmime-multipart.c (multipart_remove_header): Same as gmime-part.c * gmime-part.c (mime_part_remove_header): Don't return anything here since our function is supposed to return void. 2002-08-31 Jeffrey Stedfast <fejj@ximian.com> * gmime-parser.c (parser_scan_mime_part_content): Pass `content' into parser_scan_content(), fixes bug #92183. 2002-08-30 Jeffrey Stedfast <fejj@ximian.com> * configure.in: Bumped version to 1.90.1 * doc/Makefile.am: Don't gtkdoc-fixxref if the user disabled gtk-doc from the build. 2002-08-25 Jeffrey Stedfast <fejj@ximian.com> * test-best.c: New test suite for the gmime-filter-best filter. * gmime.h.in: Added gmime-filter-best.h * gmime-filter-best.c (g_mime_filter_best_charset): Never return NULL, instead return us-ascii. (filter_filter): Fixed to not get into an infinite loop. 2002-08-23 Jeffrey Stedfast <fejj@ximian.com> * doc/*: Updated. * gmime-message-part.c (message_part_write_to_stream): Changed the prototype to return ssize_t and not int. 2002-08-21 Jeffrey Stedfast <fejj@ximian.com> * gmime-filter-best.c: New filter for calculating the best charset and encoding for a stream. * gmime-iconv-utils.c (g_mime_iconv_locale_to_utf8): Make threadsafe. (g_mime_iconv_locale_to_utf8_length): Same. (g_mime_iconv_utf8_to_locale): Here too. (g_mime_iconv_utf8_to_locale_length): And here. * gmime.c (g_mime_init): Updated to call g_mime_charset_map_init(). * gmime-charset.c (g_mime_charset_locale_name): Initialize the charset map if it hasn't already been initialized. (g_mime_charset_map_init): Renamed from g_mime_charset_init(). (g_mime_charset_init): Renamed from charset_init() and also made it globally accessable. (g_mime_charset_step): New external function (was an internal function before). (g_mime_charset_best_name): Now an external function also. 2002-08-19 Jeffrey Stedfast <fejj@ximian.com> * gmime-gpg-context.c (gpg_decrypt): Report better errors for when gpg fails to be executed. (gpg_encrypt): Same. (gpg_verify): Here too. (gpg_sign): And here. (gpg_ctx_op_start): Try stat()ing the gpg binary to make sure it exists and when handling an exception, save errno so we can re-set it after cleanup. 2002-08-11 Jeffrey Stedfast <fejj@ximian.com> * gmime-iconv.c: Instead of checking for #ifdef _REENTRANT, just check #ifdef G_THREADS_ENABLED and use a GStaticMutex rather than a pthread_mutex_t. * gmime-charset.c (g_mime_charset_init): Use nl_langinfo() if it is available. (g_mime_charset_name): Call g_mime_charset_init() if iconv_charsets is NULL (meaning the programmer did not properly initialize gmime). Also do mutex locking around the use of the iconv_charset hash table. 2002-08-10 Jeffrey Stedfast <fejj@ximian.com> * test-pgpmime.c (test_multipart_signed): Unref the content object after setting it on the MIME part. * gmime-multipart-signed.c (g_mime_multipart_signed_sign): Unref the content object after setting it on the MIME part. (g_mime_multipart_signed_verify): Unref the content object after we're done with it. * gmime-multipart-encrypted.c (g_mime_multipart_encrypted_encrypt): Unref the content object after setting it on the MIME part. (g_mime_multipart_encrypted_decrypt): Unref the content object after we're done with it. * gmime-message-partial.c (g_mime_message_partial_reconstruct_message): Unref the content object when we're done with it. (g_mime_message_partial_split_message): Unref the content object after setting it on the MIME part. * gmime-parser.c (parser_scan_mime_part_content): Unref the content object after setting it on the MIME part. * gmime-part.c (g_mime_part_set_content_object): Ref the new content object and unref the old. (g_mime_part_get_content_object): Ref the content object before returning it to our caller. (g_mime_part_finalize): Unref the content object. * gmime-data-wrapper.c: Rewritten to subclass GObject. (g_mime_data_wrapper_destroy): Removed. (g_mime_data_wrapper_write_to_stream): Virtualize. 2002-08-08 Jeffrey Stedfast <fejj@ximian.com> * gmime-iconv.c: Implemented an all new iconv cache. Also has the beginnings of thread-safety but I'd really need to fix the Makefiles to conditionally link with -lpthread before it'd be of any value as well as needing to make gmime-charset.c's functions thread-safe. 2002-08-07 Jeffrey Stedfast <fejj@ximian.com> * gmime-message.c (message_remove_header): If the header to be removed is one of the special headers, then g_free() the cached value on the message object and set it to NULL. Fixes bug #90138. 2002-08-05 Jeffrey Stedfast <fejj@ximian.com> * doc/*: Updated. * gmime-multipart-signed.c (g_mime_multipart_signed_sign): Documented. (g_mime_multipart_signed_verify): Documented. * gmime-filter-from.c (g_mime_filter_from_new): Updated the documentation to explain the new mode argument. * gmime-multipart-encrypted.c (g_mime_multipart_encrypted_encrypt): Documented. (g_mime_multipart_encrypted_decrypt): Documented. * gmime-gpg-context.c (g_mime_gpg_context_get_always_trust): Implemented. 2002-08-04 Jeffrey Stedfast <fejj@ximian.com> * doc/*: Updated. 2002-08-03 Jeffrey Stedfast <fejj@ximian.com> * gmime-message.c (g_mime_message_set_message_id): Revert Charles' previous fix and just g_return_if_fail() if the message_id is NULL instead. (g_mime_message_set_subject): Same for NULL subjects. (g_mime_message_set_reply_to): Here too. (g_mime_message_set_sender): Again here. (g_mime_message_add_header): Check that the value != NULL. (g_mime_message_set_header): Same here. * internet-address.c (decode_mailbox): Changed a for-loop into a while-loop to make the code a tad easier to read. Also fixed a type-o that meant to wrap a debug printf in d(). While we're at it, g_strstrip the resulting comment before using it as the name part of the address. 2002-08-02 Jeffrey Stedfast <fejj@ximian.com> * gmime-message-part.c: Fix some comments that say "message/*" (which is meant as a wildcard mime-type match) and change them to just "message" to prevent compiler warnings about a /* being inside a comment. * gmime-charset.c: Get rid of a #include "unicode.h". This is no longer needed since we use glib2's unicode stuff. 2002-08-02 Charles Kerr <charles@rebelbase.com> * gmime-message.c (gmime_message_foreach_part): if the message isn't a multipart message, just invoke the callback directly, passing in the single part. * gmime-message.c (gmime_message_set_message_id): work around a g_strstrip() warning if message_id is NULL. * gmime-part.c (g_mime_part_get_content_object): remove "const" from the retval; otherwise it's impossible to add a new filter. 2002-07-31 Jeffrey Stedfast <fejj@ximian.com> * gmime-filter-html.c (is_addr_char): Don't use "isprint(c)" to mean "c >= 32 && c < 128" since it doesn't in most locales. (is_url_char): Same. (is_trailing_garbage): Same. (is_domain_name_char): New macro for dns-valid characters (email_address_extract): Use is_domain_name_char rather than is_addr_char for the part after the @. 2002-07-30 Jeffrey Stedfast <fejj@ximian.com> * gmime-parser.c (parser_step_headers): Finish the fix from yesterday, the last statement of the while-loop needs to re-calculate `len' for parser_fill(). 2002-07-30 Charles Kerr <charles@rebelbase.com> * gmime-message.c (message_remove_header): Fix April 3 2002 bug that kept message-remove-header from removing headers. 2002-07-29 Jeffrey Stedfast <fejj@ximian.com> * gmime-message.c (message_get_headers): Write the toplevel MIME Part's headers to the string as well, this fixes bug #88632 in bugzilla.gnome.org. 2002-07-29 Jeffrey Stedfast <fejj@ximian.com> The following changes are meant to address bug #88100 on bugzilla.gnome.org - I'm as of yet unsure whether or not GMime should override the Message-Id write function or if Pan should do it. I'm sort of leaning towards Pan doing it simply because the current behavior is RFC compliant and the bug is really a "we need a workaround for a buggy NNTP server". However... It might just be simpler to have GMime do it. * gmime-header.c (g_mime_header_new): Init a new hash table that stores info on how to write a particular header. (g_mime_header_destroy): Free the hash table. (g_mime_header_set_write_func): Set the writer function for a header. (g_mime_header_write_to_stream): Use the specified header write function for each ehader. If one wasn't specified, use the default. 2002-07-29 Charles Kerr <charles@rebelbase.com> * remove strlib.[ch] * use g_strcasecmp instead of strcasecmp * use g_strncasecmp instead of strncasecmp * use g_stpcpy instead of stpcpy * added "#include <string.h>" where needed 2002-07-29 Charles Kerr <charles@rebelbase.com> * gmime-filter-strip: fix trivial compiler warning. * gmime-message-part.c: same. * gmime-multipart-signed.c: same. * gmime-object.c: same. * gmime-param.c: same. * gmime-session.c: same. * test-iconv.c: same. * test-mbox.c: same. * test-parser.c: same. * test-partial.c: same. 2002-07-29 Jeffrey Stedfast <fejj@ximian.com> * gmime-parser.c (parser_step_headers): When refilling, make sure that the refilled buffer is larger than the buffer was before refilling, otherwise break out of the loop and parse whatever is left. Fixes bug #89260 on bugzilla.gnome.org 2002-07-27 Jeffrey Stedfast <fejj@ximian.com> * gmime-stream-cat.c (stream_read): Initialize `n' at the beginning of the while-loop so that it can't be used uninitialized. * gmime-parser.c (header_parse): Check to make sure that the header was valid (ie, `colon' == ':'). If not, then set header->value to "". 2002-05-26 Charles Kerr <charles@rebelbase.com> * alloca.c: removed. * gmime-charset.c: use g_alloca instead of alloca. * gmime-filter-from.c: same. * gmime-filter-strip.c: same. * gmime-iconv.c: same. * gmime-param.c: same. * gmime-part.c: same. * gmime-utils.c: same. * memchunk.c: same. 2002-07-21 Jeffrey Stedfast <fejj@ximian.com> * gmime-filter-crlf.c (filter_filter): Fix to not add an extra \r for pre-canonicalised streams. 2002-07-19 Jeffrey Stedfast <fejj@ximian.com> * gmime-iconv-utils.c (g_mime_iconv_strndup): Fix a logic mistake in the calculation of the number of bytes converted. 2002-07-18 Jeffrey Stedfast <fejj@ximian.com> * gmime-part.c (set_disposition): Fix to parse the disposition parameter values rather than assuming it is only the "attachment" or "inline" part of the value. 2002-07-14 Jeffrey Stedfast <fejj@ximian.com> * configure.in: check for gmtime_r * gmime-utils.c (g_mime_utils_header_format_date): Use gmtime_r() if we have this function available to us. * gmime-parser.c (parser_step_from): Save the From-line offset. (g_mime_parser_get_from_offset): Newly implemented function used for retrieving the offset of the From-line (for use when parsing mbox files). 2002-07-11 Jeffrey Stedfast <fejj@ximian.com> * strlib.c (strlcpy): Changed to behave the same as the Solaris strlcpy function. (strlcat): Changed to behave the same as the Solaris strlcat function. 2002-07-04 Jeffrey Stedfast <fejj@ximian.com> * gmime-iconv-utils.c (g_mime_iconv_strndup): Fix for nul-terminating some multibyte charsets. 2002-06-28 Jeffrey Stedfast <fejj@ximian.com> * gmime-gpg-context.c (gpg_ctx_op_step): If we get an EOF from the status-fd, then set gpg->complete to TRUE. (gpg_ctx_get_argv): Use --charset=UTF-8 and --keyserver-options to disable auto-key-retrieve rather than the deprecated --no-auto-key-retrieve flag. 2002-06-27 Jeffrey Stedfast <fejj@ximian.com> * gmime-gpg-context.c (gpg_ctx_op_step): Loop on our reads while errno is EINTR or EAGAIN. Also make sure to completely read stdout and stderr by keeping better state. (gpg_ctx_parse_status): If we encounted a NODATA error from gpg and we have diagnostics output, use that as the exception string. (gpg_ctx_op_exited): New function to determine if the gpg process has exited. (gpg_ctx_op_wait): Reuse any exit status information from gpg_ctx_op_exited(). (gpg_verify): Check that the gpg process has not exited each loop. 2002-06-26 Jeffrey Stedfast <fejj@ximian.com> * gmime-multipart-signed.c (g_mime_multipart_signed_sign): Once we've created the mime-part stream and armored the From lines and such, create a new MIME part based on this stream (since normally our QP encoder will not armor From lines) and use it as the content part for this multipart/signed part rather than the original MIME part. (multipart_signed_write_to_stream): This can now be simplified by calling our parent class's write_to_stream implementation since g_mime_multipart_signed_sign() takes care of all the From armoring. 2002-06-26 Jeffrey Stedfast <fejj@ximian.com> * test-pgpmime.c: New test suite for the pgp/mime code. * gmime-gpg-context.c (gpg_ctx_parse_status): Handle a NODATA status message from gpg. * gmime-message.c (g_mime_message_new): Don't set NULL header values via the g_mime_object_set_header interface. * gmime-object.c (g_mime_object_add_header): Don't allow value == NULL. (g_mime_object_set_header): Same. * gmime.h.in: Updated to #include the new headers related to encryption and digital signatures. * gmime.c (g_mime_init): register the multipart/encrypted and multipart/signed cclass types. * gmime-multipart-signed.c: Fixed to compile cleanly. (multipart_signed_write_to_stream): We need to handle writing out the subparts ourselves because we need to armor From-lines. * gmime-multipart-encrypted.c: Fixed to compile cleanly. 2002-06-25 Jeffrey Stedfast <fejj@ximian.com> * gmime-param.c (g_string_append_len_quoted): Append length as advertised rather than appending the whole string. Oops. * gmime-multipart-encrypted.c (g_mime_multipart_encrypted_decrypt): Ugh, the g_return_val_if_fail()'s should be returning NULL. * test-pgp.c: New test suite to make sure that the gpg code works. * gmime-gpg-context.c: Keep more state as it seems we needed it. Also keep information such as trust level and whether the signature was found to be valid and such (in case we ever decide to use it). 2002-06-24 Jeffrey Stedfast <fejj@ximian.com> * gmime-multipart-signed.c (g_mime_multipart_signed_get_type): Register as a subclass of a GMimeMultipart. * gmime-multipart-encrypted.c (g_mime_multipart_encrypted_get_type): Same. * gmime-gpg-context.[c,h]: A new class implementing the GMimeCipherContext interfaces for GnuPG. * gmime-session.[c,h]: New abstract session class for use by the cipher context classes for requesting passphrases/etc. * gmime-cipher-context.c (g_mime_cipher_context_finalize): Unref the gmime-session. 2002-06-22 Jeffrey Stedfast <fejj@ximian.com> * gmime-part.c: Oops, a prototype had the wrong return type. 2002-06-19 Jeffrey Stedfast <fejj@ximian.com> * gmime-multipart.c: Oops, some prototypes had the wrong return type. 2002-06-15 Jeffrey Stedfast <fejj@ximian.com> * gmime-parser.c (parser_scan_mime_part_content): Use g_mime_stream_mem_new_with_byte_array() so that the mem stream owns the byte array so we don't leak. 2002-06-12 Jeffrey Stedfast <fejj@ximian.com> * gen-table.c: Updated. * gmime-utils.c (quoted_decode): Oops. ESPECIALs are allowed inside of the encoded-text section of the encoded-word. * gmime-message.c (process_header): Add some NULL-protection. * gmime-iconv.c (g_mime_iconv_open): If the from charset is "x-unknown", replace it with the user's locale charset. 2002-06-11 Jeffrey Stedfast <fejj@ximian.com> * gmime-parser.c (parser_scan_mime_part_content): If the parser stream is not seekable, then scan the content into a memory stream. 2002-06-09 Jeffrey Stedfast <fejj@ximian.com> * gmime-2.0.pc.in: New file for use in pkg-config. * gmime-filter-strip.[c,h]: New source files implementing a stream filter for stripping trailing whitespace from lines (needed for PGP/MIME). * gmime-exception.[c,h]: New source files implementing generic error reporting functionality. * gmime-cipher-context.[c,h]: New abstract class for performing common functionality (such as encryption, decryption, signing, verifying, importing keys, and exporting keys) needed by any MIME cipher suite (PGP/MIME and S/MIME specifically). * gmime-multipart-signed.[c,h]: New source files implementing the multipart/signed specification. * gmime-multipart-encrypted.[c,h]: New source files implementing the multipart/encrypted specification. 2002-06-06 Jeffrey Stedfast <fejj@ximian.com> * test-mbox.c (test_parser): Test the new set_header_regex function. * gmime-parser.c (g_mime_parser_set_header_regex): New convenience function to allow an application to be notified when a header matching a particular pattern is parsed by the parser. Particularly useful for finding the Status: header when parsing mbox files. 2002-06-04 Jeffrey Stedfast <fejj@ximian.com> * gmime-iconv-utils.c (g_mime_iconv_strndup): Pull up past fixes from the gmime-1 branch. 2002-06-02 Jeffrey Stedfast <fejj@ximian.com> * gmime.c (g_mime_init): Register the message-part class. * gmime-message-part.c: New class for handling message/* subparts. * gmime-parser.c (parser_scan_message_part): Handle mime parts of type message. (parser_construct_leaf_part): Find out if the leaf part is actually a message part. * gmime-filter-from.c (g_mime_filter_from_new): Now takes a mode argument to specify how "From "'s should be protected. (filter_filter): If we are to armor the "From " then transform it into "=46rom " otherwise transform it into the normal ">From ". 2002-05-31 Jeffrey Stedfast <fejj@ximian.com> * gmime/gmime-stream-cat.c (stream_read): Rewritten to work correctly. This was broken worse than I could imagine :-) (stream_write): Fix similarly. 2002-05-30 Jeffrey Stedfast <fejj@ximian.com> * gmime-stream-cat.c (stream_reset): Same. * gmime-stream-file.c (stream_reset): Same. * gmime-stream-fs.c (stream_reset): If the stream position is already reset, just return 0. 2002-05-23 Jeffrey Stedfast <fejj@ximian.com> * doc/*: Updated documentation. 2002-05-22 Jeffrey Stedfast <fejj@ximian.com> * gmime-multipart.c (multipart_write_to_stream): Avoid adding an extranious newline character when a preface doesn't exist. 2002-05-20 Jeffrey Stedfast <fejj@ximian.com> * gmime-part.c (g_mime_part_set_content_md5): Fix some compiler warnings as well as doing some more error handling. (g_mime_part_verify_content_md5): Same. * md5-utils.c: Removed some compiler warnings. 2002-05-20 Jeffrey Stedfast <fejj@ximian.com> * gmime-stream-cat.c (stream_seek): Return the absolute offset into the cat stream rather than the relative offset of one of the substreams on success. Fixed a few other things too. (stream_read): Fix the logic here so that we never try reading from a stream that is current at EOS. 2002-05-16 Jeffrey Stedfast <fejj@ximian.com> * gmime-parser.c (parser_scan_mime_part_content): Only compensate for the '\n' if we found a boundary. 2002-05-16 Charles Kerr <charles@rebelbase.com> * gmime-filter-yenc.c: fixed regression that caused end line of yenc encoding to not be detected. This was causing crc errors in Pan. 2002-05-14 Jeffrey Stedfast <fejj@ximian.com> * gmime-stream-filter.c (stream_destroy): Removed. 2002-05-12 Jeffrey Stedfast <fejj@ximian.com> * gmime-stream-cat.c (stream_read): Don't allow our caller to read past the end of the stream. (stream_write): Same. (stream_seek): Don't forget to add the current source stream's bound_start when seeking on the current source stream. * gmime-message-partial.c (g_mime_message_partial_init): Zero our extra fields. (g_mime_message_partial_finalize): Cleanup strdup'd memory. (message_partial_set_content_type): Implemented. (g_mime_message_partial_class_init): Override set_content_type(). (g_mime_message_partial_get_id): Simplify. (g_mime_message_partial_get_number): Simplify. (g_mime_message_partial_get_total): Simplify. * gmime-multipart.c (multipart_set_content_type): Implement. (g_mime_multipart_class_init): Override set_content_type(). * gmime-object.c: Make set_content_type() virtual. 2002-05-12 Jeffrey Stedfast <fejj@ximian.com> * gmime-message-partial.c (partial_compare): Fixed to work properly. 2002-05-12 Jeffrey Stedfast <fejj@ximian.com> * test-partial.c: New test suite for gmime-message-partial.c. * gmime-stream-cat.c: Several fixes. (g_mime_stream_cat_class_init): Overload the seek method. * gmime-stream-mmap.c (g_mime_stream_mmap_class_init): Overload the seek method. * gmime-stream-buffer.c (g_mime_stream_buffer_class_init): Overload the seek method. * gmime-stream-null.c (g_mime_stream_null_class_init): Overload the seek method. * gmime-stream-filter.c (g_mime_stream_filter_class_init): Overload the seek method. * gmime-stream.c (g_mime_stream_class_init): Overload the seek method. * gmime-stream-mem.c (g_mime_stream_mem_class_init): Overload the seek method. * gmime-stream-file.c (g_mime_stream_file_class_init): Overload the seek method. (stream_length): The length of the stream is bound_end - bound_start. * gmime-stream-fs.c (g_mime_stream_fs_class_init): Overload the seek method. (stream_length): The length of the stream is bound_end - bound_start. 2002-05-10 Jeffrey Stedfast <fejj@ximian.com> * gmime-stream-cat.c (stream_reset): Use stream_seek(). (stream_read): Seek to position before starting our read, this is to protect against one of our source streams being read while we weren't looking and/or a substream related to our cat stream. (stream_write): Same. 2002-05-09 Jeffrey Stedfast <fejj@ximian.com> * gmime-message-partial.c: New class to handle MIME parts with a content-type of message/partial. * gmime.c (g_mime_init): Register the message/partial class. * gmime-object.c (g_mime_object_new_type): If we fail to find an appropriate mime object class, try falling back to the */* handler. Only if that fails do we return NULL. 2002-05-08 Jeffrey Stedfast <fejj@ximian.com> * Makefile.am: Added gmime-stream-cat.c to the build. * gmime-stream-cat.c: New stream that acts similar to the Unix `cat` command by concatenating multiple streams. 2002-05-07 Jeffrey Stedfast <fejj@ximian.com> * gmime-stream-fs.c (stream_write): Do more error handling and also try to write out everything. 2002-05-02 Jeffrey Stedfast <fejj@ximian.com> * gmime-charset.c (main): Generate the multibyte charsets without the need for using external .dat files. Also attempt to condense the charset-map table a bit. * gen-multibyte.c: Removed. 2002-04-30 Jeffrey Stedfast <fejj@ximian.com> * gmime-charset.c (main): Instead of converting the multibyte charset tables to UTF-8 and then using the unicode functions to convert UTF-8 to UCS4, just convert directly to UCS4. Also fixed a type-o in the Big5.dat filename (it should be Big5.dat not Big5.data). 2002-04-26 Jeffrey Stedfast <fejj@ximian.com> * gmime-parser.c (parser_fill): Try to align the end of our left-over buffer with realbuf + SCAN_HEAD so that we avoid: 1) completely filling the prespace or 2) reading more than SCAN_BUF bytes per read() call. 2002-04-25 Jeffrey Stedfast <fejj@ximian.com> * gmime-utils.c (g_mime_utils_base64_decode_step): Only backtrack if we have output data. 2002-04-23 Jeffrey Stedfast <fejj@ximian.com> * gmime-utils.c (rfc2047_encode_phrase): Fixed a small memory leak. Thanks to the Pan guys for finding this. 2002-04-21 Jeffrey Stedfast <fejj@ximian.com> * gmime-parser.c (parser_step_from): Fixes to make it work. (g_mime_parser_eos): New function to tell if a parser is at the end of it's stream. 2002-04-20 Jeffrey Stedfast <fejj@ximian.com> * docs/*: Updated. * configure.in: Add $srcdir to the include path so it catches iconv-detect.h. 2002-04-18 Jeffrey Stedfast <fejj@ximian.com> * gmime-parser.c (parser_step_headers): Take advantage of the same optimization as parser_scan_content. 2002-04-17 Jeffrey Stedfast <fejj@ximian.com> * gmime-parser.c (parser_scan_content): Optimized by a good 15% by simply changing my inner while-loop. See comment for explanation. * gmime-part.c (g_mime_part_encoding_from_string): Added support for the binary encoding. (g_mime_part_encoding_to_string): Same. * gmime-utils.h: Added GMIME_PART_ENCODING_BINARY. 2002-04-17 Jeffrey Stedfast <fejj@ximian.com> * gmime-parser.c (parser_scan_multipart_subparts): Don't leak objects! 2002-04-16 Jeffrey Stedfast <fejj@ximian.com> * gmime-message.c (process_header): process the headers we care about. (message_add_header): Call process_header. (message_set_header): Same. * gmime-part.c (process_header): process the headers we care about. (mime_part_add_header): Call process_header. (mime_part_set_header): Same. * gmime-object (process_header): process the headers we care about. (add_header): Call process_header. (set_header): Same. 2002-04-15 Jeffrey Stedfast <fejj@ximian.com> * gmime-parser.c (g_mime_parser_set_scan_from): New accessor method to set whether or not to scan from-lines. (g_mime_parser_get_scan_from): New accessor method to get the from-line mode. 2002-04-14 Jeffrey Stedfast <fejj@ximian.com> * gmime-utils.c (datetok): Treat ',' as a token delimeter. Also updated the datetok lookup table. * configure.in: Check for off_t, size_t, and ssize_t. 2002-04-15 Jeffrey Stedfast <fejj@ximian.com> * gmime-parser.[c,h]: Brand spankin' new parser. Seems to work for at least simple messages, needs a lot more love though. * gmime-stream*.c: Don't use a base_class init or finalize. * gmime-object.c: Same. * gmime-part.c: Same here. * gmime.c (g_mime_init): Call g_type_init. * gmime-utils.c (g_mime_utils_header_fold): Slight bugfix to get rid of extra whitespace at the end of a line. * gmime-multipart.c (g_mime_multipart_set_preface): New accesor function to set the multipart preface. (g_mime_multipart_get_preface): New accesor function to get the multipart preface. (g_mime_multipart_set_postface): New accesor function to set the multipart postface. (g_mime_multipart_get_postface): New accesor function to get the multipart postface. (write_to_stream): Don't force a preface if we don't have one. 2002-04-08 Jeffrey Stedfast <fejj@ximian.com> * gmime-object.c: Don't tie the type-registry lifetime to the GMimeObject lifetime. * gmime.c (g_mime_init): Register our generic and multipart/* MIME object classes here. * gmime-part.c (g_mime_part_class_init): Don't register ourselves here anymore. * gmime-multipart.c (g_mime_multipart_class_init): Don't register ourselves here anymore. 2002-04-07 Jeffrey Stedfast <fejj@ximian.com> * gmime-utils.c (g_mime_utils_uuencode_close): Fixed a bug that crept in during my simplification. 2002-04-07 Jeffrey Stedfast <fejj@ximian.com> * gmime-part.c (g_mime_part_set_content_id): Wrap the object set_content_id. (g_mime_part_get_content_id): Same. * gmime-multipart.c (g_mime_multipart_get_subpart_from_content_id): Compare the object->content_id's. * gmime-object.c (g_mime_object_set_content_id): New function since the Content-Id should really be stored on the object class. (g_mime_object_get_content_id): Same. (set_header): If we are setting the Content-Id header, also set our internal content_id member. (add_header): Same. * gmime-content-type.c (g_mime_content_type_set_parameter): Renamed from g_mime_content_type_add_parameter. * gmime-multipart.c (g_mime_multipart_new_with_subtype): New convenience function. * Makefile.am temporarily removed gmime-parser.c from the build. It needs to be completely rewritten from scratch pretty much. 2002-04-06 Jeffrey Stedfast <fejj@ximian.com> * gmime-part.c (g_mime_part_add_subpart): Removed. (g_mime_part_set_boundary): Removed. (g_mime_part_get_boundary): Removed. * gmime-object.c (g_mime_object_get_content_type_parameter): New function. (g_mime_object_set_content_type_parameter): New function. * gmime-multipart.c (g_mime_multipart_new): New function, forgot to implement it before ;-) (multipart_set_boundary): Set the boundary parameter on the content-type. 2002-04-06 Jeffrey Stedfast <fejj@ximian.com> * gmime-part.c (g_mime_part_foreach): Removed. (g_mime_part_get_subpart_from_content_id): Same. * gmime-multipart.c (g_mime_multipart_foreach): Moved here from gmime-part.c:g_mime_part_foreach since this is really only meant to work on multiparts. (g_mime_multipart_get_subpart_from_content_id): Same idea here too. * gmime-object.c (g_mime_object_set_content_type): Move g_mime_part_set_content_type up to the GMimeObject abstraction. (g_mime_object_get_content_type): Same. 2002-04-03 Jeffrey Stedfast <fejj@ximian.com> * gmime-message.c: Initial port to GObject. 2002-04-02 Jeffrey Stedfast <fejj@ximian.com> * gmime-message.c (g_mime_message_add_recipients_from_string): Destroy the temporary addrlist. 2002-03-29 Jeffrey Stedfast <fejj@ximian.com> * configure.in: Detect the iconv-friendly formats for iso charsets at configure time and dump them into iconv-detect.h for use in gmime-charset.c. * gmime-charset.c: Updated to use iconv-detect.h if it exists. 2002-03-25 Jeffrey Stedfast <fejj@ximian.com> * gmime-multipart.c: Compile fixes. * gmime-header.c (g_mime_header_write_to_stream): Now returns the number of bytes written or -1 on fail. * gmime-object.c: Compile fixes. * gmime-stream-null.c (g_mime_stream_null_finalize): And finally here. * gmime-stream-mmap.c (g_mime_stream_mmap_finalize): Here too. * gmime-stream-mem.c (g_mime_stream_mem_finalize): And again... * gmime-stream-fs.c (g_mime_stream_fs_finalize): Again here. * gmime-stream-filter.c (g_mime_stream_filter_finalize): Here too. * gmime-stream-file.c (g_mime_stream_file_finalize): Same. * gmime-stream-buffer.c (g_mime_stream_buffer_finalize): Call GObject's finalize function. 2002-03-24 Jeffrey Stedfast <fejj@ximian.com> * memchunk.c: Make this compile. * internet-address.c (decode_mailbox): No longer check gmime_interfaces_utf8 as that was a hack in gmime-1's branch. * gmime-charset.c (charset_step): Sync with the gmime-1 branch. We now have multibyte charset detection. * gmime-utils.c: Sync with gmime-1's changed. (rfc2047_decode_word): Always convert decoded text to UTF-8. (rfc2047_encode_phrase_get_words): We can always assume our input is in UTF-8 now. (rfc2047_encode_phrase): Sam here. (g_string_append_len): Removed since glib2 now has this function. * gmime-param.c (decode_param): Make sure the decoded text is valid UTF-8. (encode_param): Convert to the best charset before encoding. (g_string_append_len): Removed since glib2 now has this function. * gmime.c (g_mime_init): Initializes gmime. We no longer care about GMIME_INIT_FLAGS_UTF8 as we now always use UTF-8 interfaces. 2002-03-17 Jeffrey Stedfast <fejj@ximian.com> * gmime-stream-null.c (g_mime_stream_null_get_type): Use GMIME_TYPE_STREAM as our base class. (g_mime_stream_null_class_init): Our parent class is a GMIME_STREAM_CLASS, not a G_OBJECT_CLASS. (g_mime_stream_null_finalize): Call our parent's finalize, which is GMIME_STREAM_CLASS's finalize, not G_OBJECT_CLASS's finalize. * gmime-stream-mmap.c: Same. * gmime-stream-filter.c: Here too. * gmime-stream-file.c: And here. * gmime-stream-fs.c: Again here. * gmime-stream-mem.c: And again... * gmime-stream-buffer.c: And finally here. * gmime-multipart.[c,h]: New class that inherits from GMimeObject that represents a MIME multipart. 2002-03-17 Jeffrey Stedfast <fejj@ximian.com> * gmime-object.c: Ported to glib2 by subclassing GObject and also added a GMimeHeader data member and methods to access those headers as well as adding abstract methods for getting the headers as one big string buffer and writing the object headers/content to a stream. * gmime-stream-*.c (*_class_init): Don't set a destroy handler - we can't, we don't have a virtual function pointer for it! * gmime-stream.c (g_mime_stream_substream): Use GET_CLASS since we are passing in an object. (g_mime_stream_length): Same. (g_mime_stream_tell): Here too. (g_mime_stream_seek): And here. (g_mime_stream_reset): And again here. (g_mime_stream_eos): Again. (g_mime_stream_close): Here too. (g_mime_stream_flush): Same. (g_mime_stream_write): Same here. (g_mime_stream_read): And finally here. (g_mime_stream_class_init): Setup default implementations of all the stream methods. Also no longer set a destroy handler. * gmime-stream-buffer.[c,h]: Updated to subclass the new GMimeStream based on GObject. 2002-03-16 Jeffrey Stedfast <fejj@ximian.com> * gmime-stream-filter.[c,h]: Updated to subclass the new GMimeStream based on GObject. * gmime-stream-fs.[c,h]: Updated to subclass the new GMimeStream based on GObject. * gmime-stream-file.[c,h]: Updated to subclass the new GMimeStream based on GObject. * gmime-stream-mmap.[c,h]: Updated to subclass the new GMimeStream based on GObject. * gmime-stream-null.[c,h]: Updated to subclass the new GMimeStream based on GObject. * gmime-stream-mem.[c,h]: Updated to be based on the new implementation of GMimeStream. * gmime-type-utils.h: New file to contain some more-friendly type-cast macros around the glib2 ones. * gmime-stream.[c,h]: Now subclasses GObject. Not sure if I got everything right, but I think it's mostly there? 2002-03-15 Charles Kerr <charles@rebelbase.com> * gmime-filter-charset.c: fixed minor compiler warnings. * gmime-iconv-utils.c: same. * test-html.c: same. * test-iconv.c: same. * test-mime.c: same. * test-streams.c: same. 2002-03-15 Jeffrey Stedfast <fejj@ximian.com> * gmime-utils.c (g_mime_utils_uudecode_step): Fixed a logic mistake. All is good now in the land of UU :-) 2002-03-15 Charles Kerr <charles@rebelbase.com> Syncing up with small changes from Pan... * gmime-content-type.c: remove unused #include <alloca.h> * gmime-message.c: same. * gmime-part.c: same. * internet-address.c: same. * gmime-filter-basic.c: add #include <string.h> (strncmp) * gmime-filter-yenc.c: add #include <string.h> (strncmp) * gmime-iconv-utils.c: add #include <string.h> (strlen) * gmime-iconv.c: add #include <string.h> (strlen) * gmime-iconv.c: add #include <stdio.h> (sprintf) 2002-03-14 Jeffrey Stedfast <fejj@ximian.com> * gmime-filter-yenc.c (filter_reset): Added a switch-statement based on direction. Yes, for now the INIT state for encode/decode are both the same but this may change? Probably not but oh well :-) (g_mime_ydecode_step): Sync up with Charles' yenc fixes. 2002-03-13 Jeffrey Stedfast <fejj@ximian.com> * gmime-filter-yenc.c: Compile fixes. 2002-03-12 Jeffrey Stedfast <fejj@ximian.com> * gmime-filter-yenc.c (g_mime_filter_yenc_get_pcrc): Finalize the crc before returning. (g_mime_filter_yenc_get_crc): Same. 2002-03-12 Jeffrey Stedfast <fejj@ximian.com> * gmime-filter-yenc.c: New filter to encode/decode yEnc streams. 2002-03-03 Jeffrey Stedfast <fejj@ximian.com> Thanks to Carlos Morgado <chbm@chbm.nu> * gmime.spec.in: Fix. 2002-03-03 Jeffrey Stedfast <fejj@ximian.com> * gmime-part.c (g_mime_part_write_to_stream): Get rid of some extra line feeds. 2002-02-21 Jeffrey Stedfast <fejj@ximian.com> * doc/*: Updated. * configure.in: Updated version to 0.8.0 2002-01-25 Jeffrey Stedfast <fejj@ximian.com> * gmime-charset.c (g_mime_charset_name): Updated for AIX, HPUX, IRIX, and Sun systems. 2002-01-24 Jeffrey Stedfast <fejj@ximian.com> * gmime-iconv.c (iconv_cache_bucket_add_node): Fixed an oops. (iconv_cache_bucket_get_first_unused): Fixed another oops. 2002-01-20 Jeffrey Stedfast <fejj@ximian.com> * gmime-data-wrapper.c (g_mime_data_wrapper_write_to_stream): Handle the x-uuencode encoding type. * gmime-utils.c (g_mime_utils_uuencode_close): No longer needs a uulen argument since it is now compacted into the state argument. (g_mime_utils_uuencode_step): Same here. * gmime-filter-basic.c (filter_filter): Ignore data until we have found the "begin" line. Also, we no longer need uulen. (filter_complete): Same. * gmime-part.c (g_mime_part_encoding_to_string): Handle x-uuencode. (g_mime_part_encoding_from_string): Same. (g_mime_part_set_pre_encoded_content): Here too. (write_content): And again here. 2002-01-19 Jeffrey Stedfast <fejj@ximian.com> * gmime-iconv.c (iconv_node_new): Return the node - how did I miss this!? 2002-01-18 Jeffrey Stedfast <fejj@ximian.com> * configure.in: Fixed more silliness. * acconfig.h: Added #undef's for some iconv stuff. * gmime-filter-charset.c (g_mime_filter_charset_new): Put the charset arguments in the right order. * gmime-iconv.c (g_mime_iconv_open): Swap the to/from arguments so that they are in the same order as iconv_open. * gmime-iconv-utils.c (iconv_utils_init): Put the to/from arguments in the right order. 2002-01-17 Jeffrey Stedfast <fejj@ximian.com> * gmime-iconv-utils.c (g_mime_iconv_strndup): If we get an EILSEQ, just return NULL rather than g_strndup'ing the original string. We'd rather get back NULL and know it failed than get back a string thinking everything went okay. * configure.in: Fixed some silliness, thanks to Charles Schmidt. 2002-01-16 Jeffrey Stedfast <fejj@ximian.com> * gmime-iconv-utils.c (g_mime_iconv_strndup): New utility function to iconv n bytes of a string and return a buffer containing the converted string. (g_mime_iconv_strdup): Same but for the whole string. (g_mime_iconv_locale_to_utf8): Converts a string in the locale charset to utf8. (g_mime_iconv_locale_to_utf8_length): Same but for a sublength of the string. (g_mime_iconv_utf8_to_locale): Converts a string from utf8 to the locale charset. (g_mime_iconv_utf8_to_locale_length): Same but for a sublength of the string. 2002-01-15 Jeffrey Stedfast <fejj@ximian.com> * test-iconv.c: test suite to make sure that the gmime-iconv cache works. * gmime-iconv.c (g_mime_iconv_init): Initialize the iconv_node memchunk. (g_mime_iconv_shutdown): Destroy the iconv_node memchunk. (iconv_node_destroy): Use memchunk_free instead of g_free. (iconv_node_new): Use memchunk_alloc. (iconv_node_set_used): Add/Remove the node to the iconv_open_hash. 2002-01-14 Jeffrey Stedfast <fejj@ximian.com> * configure.in: Bumped the version to 0.7.7 * doc/*: Updated to document the new gmime-iconv interfaces. * gmime-filter-charset.c (g_mime_filter_charset_new): Use g_mime_iconv_open instead of iconv_open. Also no longer need to use g_mime_charset_name() since gmime-iconv does this for us. (filter_destroy): Use g_mime_iconv_close() instead of iconv_close(). * gmime-iconv.c (g_mime_iconv_open): New wrapper around iconv_open() so that we can cache the results. This'll be a major speedup for systems like Solaris where iconv_open() must dlopen a module for each of the charsets. Also uses g_mime_charset_name() to get the iconv-friendly charset name for you. (g_mime_iconv_close): New wrapper around iconv_close(). 2002-01-13 Jeffrey Stedfast <fejj@ximian.com> * configure.in: Bumped version to 0.7.6 * doc/*: Updated to document the new charset code. * gmime.h.in: Added #includes for gmime-charset.h and gmime-filter-charset.h. * gmime-filter-charset.c: New filter for converting text between charsets using iconv. * gmime-charset.c (g_mime_charset_name): New function to derive the iconv-friendly name for a given charset. 2002-01-09 Charles Kerr <charles@rebelbase.com> * internet-address.c (internet_address_list_prepend): replaced "g_return_if_fail" with "g_return_val_if_fail". * internet-address.c (internet_address_list_append): same. * internet-address.c (internet_address_set_group): removed unused variables to shut up compiler. * gmime-param.c (rfc2184_decode): same. 2002-01-08 Jeffrey Stedfast <fejj@ximian.com> * config.h.in: Added a #include <alloca.h> if HAVE_ALLOCA_H is defined - this limits the number of places I have to conditionally add #include <alloca.h> in the source files. 2002-01-05 Jeffrey Stedfast <fejj@ximian.com> * gmime-utils.c (parse_broken_date): Implemented. 2002-01-04 Jeffrey Stedfast <fejj@ximian.com> * memchunk.c (memchunk_clean): Oops, when tree_search() returns 0 we want to prune it, not the other way around :-) 2002-01-02 Jeffrey Stedfast <fejj@ximian.com> * memchunk.c (memchunk_clean): Fixed a logic mistake that prevented pruning of the head node. 2002-01-01 Charles Kerr <charles@rebelbase.com> * gmime-message (g_mime_message_get_body): added g_return_val_if_fail checks in the entry point. 2001-12-31 Jeffrey Stedfast <fejj@ximian.com> * internet-address.c (decode_address): Optimized group parsing. * doc/*: Updated. 2001-12-31 Jeffrey Stedfast <fejj@ximian.com> * strlib.c (strncasecmp): Convert the chars to lowercase before diffing. 2001-12-30 Jeffrey Stedfast <fejj@ximian.com> * configure.in: Bumped version number to 0.7.5 since the internet-address API and bits of the gmime-message API have changed. * internet-address.c (internet_address_new): Initialize the refcount to 1. (internet_address_destroy): This is now an internal function. (internet_address_ref): New function to ref an InternetAddress object. (internet_address_unref): New function to unref an InternetAddress object. (internet_address_set_group): Updated to use the new internet_address_list functions. (internet_address_add_member): Same. (internet_address_list_prepend): New function to manipulate a list of InternetAddress objects. (internet_address_list_append): Same. (internet_address_list_concat): Another new function. (internet_address_list_length): Again... (internet_address_list_destroy): Destroy a list of addresses. (internet_address_list_to_string): New utility function to write a list of addresses to a string. (internet_address_parse_string): Optimized slightly by not using GLists' generic append function and also updated to use InternetAddressList. * gmime-message.c (recipients_destroy): Updated to call internet_address_list_destroy. (sync_recipient_header): Updated to let the InternetAddress code do the work for us. (g_mime_message_add_recipient): Updated to use the new InternetAddress API. (g_mime_message_add_recipients_from_string): Same. (g_mime_message_get_recipients): Return an InternetaddressList instead of GList. 2001-12-30 Jeffrey Stedfast <fejj@ximian.com> * strlib.c (strncasecmp): Do null-checking. * TODO: Remove features that have already been implemented/fixed/whatever. 2001-12-30 Jeffrey Stedfast <fejj@ximian.com> * memchunk.c (memchunk_clean): Prune 'cleaned' nodes from our free-node list. Thanks to Charles Kerr for discovering this bug. * strlib.c (strncasecmp): Moved the return calculation to within the loop so as to only take a difference if the strings are not identical. This also fixes a bug that would falsely return non-zero for strings that were identical for the first n bytes. 2001-12-20 Jeffrey Stedfast <fejj@ximian.com> * gmime-stream.c (g_mime_stream_construct): 'type' is now an unsigned int rather than a signed int. * memchunk.c (memchunk_clean): Oops. Don't forget to free the tree after we're finished with it... 2001-12-18 Jeffrey Stedfast <fejj@ximian.com> Various compiler warning fixes to several source files (mostly "unused variable" type stuff). 2001-12-17 Jeffrey Stedfast <fejj@ximian.com> * gmime-utils.c (datetok): reimplement to not use GLists (appending is slow) and also to not g_strndup the token, instead just remember it's offset and length so we can examine it later. (decode_int): New function to decode an int. (get_wday): Now takes an inlen argument. (get_mday): Same. Also calls decode_int. (get_month): Here too. (get_year): Again here... also calls decode_int. (get_tzone): Modified to use struct _date_token. (get_time): Completely rewritten. 2001-12-16 Jeffrey Stedfast <fejj@ximian.com> * memchunk.[c,h]: A memchunk library similar to g_mem_chunk's but faster. 2001-12-16 Jeffrey Stedfast <fejj@ximian.com> * configure.in: Added a --enable-warnings to turn on compiler warnings. * gmime-utils.c: Various compiler warning cleanup. * gmime-object.c (g_mime_object_construct): Change the type argument to be of type unsigned rather than int. * gmime-filter-html.c (url_extract): g_strndup takes an unsigned length argument. * gmime-filter-from.c (filter_filter): memcpy takes an unsigned length argument. * gmime-disposition.c (g_mime_disposition_new): g_strndup takes an unsigned length argument. * gmime-content-type.c (g_mime_content_type_new_from_string): g_strndup takes an unsigned length argument. * gmime-charset.c (g_mime_charset_init): g_strndup takes an unsigned length argument. 2001-12-16 Jeffrey Stedfast <fejj@ximian.com> * gmime-part.c (g_mime_part_destroy): Now an internal-only method. * gmime-message.c (g_mime_message_destroy): Now an internal-only method. 2001-12-05 Jeffrey Stedfast <fejj@ximian.com> * gmime-filter-basic.c (filter_filter): (filter_complete): The outbuf for QP decoding can be up to len + 2 bytes and UU decoding outbuf can be up to len + 3 bytes. 2001-12-01 Jeffrey Stedfast <fejj@ximian.com> * gmime-parser.c (parse_content_headers): Set is_multipart to FALSE. (g_mime_parser_construct_part_internal): Get the inlen properly and do content-offsetting a little better by skipping past the end-of-header marker. * gmime-stream-buffer.c (g_mime_stream_buffer_gets): Use the 'register' keyword for some variables. * gmime-data-wrapper.c (g_mime_data_wrapper_set_stream): Safeguard against NULL streams. (g_mime_data_wrapper_write_to_stream): Reset the stream before writing too. * gmime-stream-mem.c (stream_seek): Fix to work like the others. (stream_read): On error, always return -1 (and not just any value less than 0) (stream_write): Same. 2001-11-30 Jeffrey Stedfast <fejj@ximian.com> * gmime-part.c (write_content): Implemented a slight optimization which bypasses the need to do any encoding in certain circumstances. 2001-11-28 Jeffrey Stedfast <fejj@ximian.com> * pan-mime-parser.c (parser_read_until_boundary): Make sure boundary is non-NULL before calling strlen on it. 2001-11-26 Jeffrey Stedfast <fejj@ximian.com> * gmime-parser.c (g_mime_parser_construct_part_internal): Fixed a bug - don't set bounds on the original stream, set the bounds on our temporary memory stream. Also got rid of find_header_end(). * gmime-filter-from.c (filter_filter): initialize fromcount to 0. 2001-11-25 Jeffrey Stedfast <fejj@ximian.com> * strlib.c (strlcpy): BSD defines the prototype as returning size_t, the strlen of the resultant string. (strlcat): Same. * gmime-stream-buffer.c (stream_flush): Oops, memmove the buffer too and a smidgen of code cleanup. (stream_reset): Fix reset for block write mode. * configure.in: Bumped the version to 0.7.4 and added checks for system mmap functions. * gmime-stream-mmap.[c,h]: New stream that uses an mmaped buffer. 2001-11-24 Jeffrey Stedfast <fejj@ximian.com> * doc/gmime-docs.sgml: Added documentation of the use of filters. 2001-11-23 Jeffrey Stedfast <fejj@ximian.com> * gmime-stream-buffer.c (stream_seek): Implemented. * gmime-parser.c (parse_content_headers): Fixed another memory leak here. * gmime-param.c (decode_param_list): Fixed a small memory leak. 2001-11-22 Jeffrey stedfast <fejj@ximian.com> * gmime-filter-from.[c,h]: New filter to escape from-lines. * pan-mime-parser.c (parser_read_until_boundary): Slight optimization. 2001-11-21 Jeffrey Stedfast <fejj@ximian.com> * gmime-utils.c (is_8bit_word_encoded): Make into a macro, we don't need to do a strlen because the atom is a GString which means we have it's length already. This also saves us some overhead of calling a function. (g_mime_utils_8bit_header_decode): Update to pass the len argument to is_8bit_word_encoded. 2001-11-18 Jeffrey Stedfast <fejj@ximian.com> * configure.in: Bumped version to 0.7.3 * gmime-param.c: GMimeParam is now a linked list of parameters rather than a single name/value pair. (g_mime_param_new_from_string): Now returns a parameter list based on the input string rather than only returning a single parameter name/value pair. Also updated to handle rfc2184 encoded parameters. (g_mime_param_destroy): Destroy the linked list of params. (g_mime_param_append): Append a new parameter. (g_mime_param_append_param): Append a new parameter object. (g_mime_param_write_to_string): New function (which replaces g_mime_param_to_string) which correctly encodes (either by quoting the value or rfc2184 encoding it) the list of parameters and optionally folds them suitable for header wrapping. * gmime-disposition.[c,h]: New source files to handle parsing/generating Content-Disposition headers. * gmime-part.c (g_mime_part_destroy): Updated to use g_mime_disposition_destroy. (g_mime_part_set_content_disposition_object): New function for setting the disposition object on a mime part. (g_mime_part_set_content_disposition): Updated to use g_mime_disposition_set. (g_mime_part_get_content_disposition): Updated to use g_mime_disposition_get. (g_mime_part_add_content_disposition_parameter): Updated to use g_mime_disposition_add_parameter. (g_mime_part_get_content_disposition_parameter): Updated to use g_mime_disposition_get_parameter. (g_mime_part_set_filename): Updated to use g_mime_disposition_add_parameter. (g_mime_part_get_filename): Updated to use g_mime_disposition_get_parameter. * gmime-content-type.c (g_mime_content_type_new_from_string): Use the gmime-param code to parse any Content-Type parameters. (g_mime_content_type_destroy): Updated to use g_mime_param_destroy. (g_mime_content_type_add_parameter): Updated to use g_mime_param functions. * gmime-utils.c (g_mime_utils_header_fold): Fixed a small header folding bug. * gmime-parser.c (parse_content_headers): Updated to use the GMimeDisposition parser. * pan-mime-parser.c (parse_content_headers): Updated to use the GMimeDisposition parser. 2001-11-16 Jeffrey Stedfast <fejj@ximian.com> * configure.in: Bumped version to 0.7.2 due to the change-over to refcounted mime objects. * gmime-object[c,h]: New source files that implement an abstract Object class. * gmime-message.c: Updated to subclass GMimeObject * gmime-part.c: Updated to subclass GMimeObject (g_mime_part_set_content_header): Set an arbitrary mime content header. (g_mime_part_get_content_header): Get an arbitrary mime content header. (g_mime_part_add_child): Finally deprecated, please use g_mime_part_add_subpart instead if you aren't already. * gmime-parser.c: Updated to unref mime parts where appropriate as well as set unknown content headers on mime parts. * pan-mime-parser.c: Same as gmime-parser.c 2001-11-14 Jeffrey Stedfast <fejj@ximian.com> * gmime-stream-null.c (g_mime_stream_null_new): A new stream, similar to /dev/null basically. 2001-11-10 Jeffrey Stedfast <fejj@ximian.com> * configure.in: Added checks for strlib functions and bumped the version to 0.7.1 (there won't be an official 0.7.1 release but I figure I should be bumping version numbers whenever I add functionality). * strlib.[c,h]: New string library that provides anything that the system libc doesn't (includig strnstr and stpcpy). * gmime-filter-html.[c,h]: New filter that converts plain text into HTML suitable for display in things like GtkHTML (makes urls into hyperlinks and preserves whitespace and such). * gmime-parser.c (g_strstrbound): Removed. (find_header_part_end): Use strnstr. (g_mime_parser_construct_part_internal): Use strnstr. 2001-10-26 Jeffrey Stedfast <fejj@ximian.com> * configure.in: Updated the version to 0.7.0 * doc/*: Updated. 2001-10-25 Jeffrey Stedfast <fejj@ximian.com> * gmime-message.c (g_mime_message_new): Now takes an "init_headers" argument, it doesn't really matter what value you put here - it's more a "I want my message headers to be in a nice friendly order rather than the order they are set in". * gmime-parser.c (g_mime_parser_construct_message): Use !preserve_headers as the init_headers argument to g_mime_message_new (). * pan-mime-parser.c (g_mime_parser_construct_message): Same. 2001-10-24 Jeffrey Stedfast <fejj@ximian.com> * pan-mime-parser.c (construct_message_headers): Use g_mime_header_add instead of g_mime_header_set so we can get multiple of the same header (such as "Received:"). * gmime-parser.c (construct_headers): Use g_mime_header_add instead of g_mime_header_set so we can get multiple of the same header (such as "Received:") and also move it into the switch statement into the default case. * gmime-message.c (g_mime_message_set_header): New function to add a header to a message. * gmime-header.c (g_mime_header_add): New function to add a header. * gmime-stream.c (g_mime_stream_writev): New function to write a vector to a stream. 2001-10-21 Jeffrey Stedfast <fejj@ximian.com> * pan-mime-parser.c: Updated to use g_mime_stream_buffer_readln. * gmime-stream-buffer.c (g_mime_stream_buffer_readln): New convenience function to read a single line from a stream. 2001-10-12 Jeffrey Stedfast <fejj@ximian.com> * gmime-part.c (g_mime_part_write_to_stream): No longer takes a 'toplevel' argument. (g_mime_part_to_string): No longer takes a 'toplevel' argument. * gmime-message.c (g_mime_message_write_to_stream): Write the MIME-Version header here instead of needing to pass a 'toplevel' argument to g_mime_part_write_to_stream(). * gmime-charset.c (g_mime_charset_init): Fix for Debian and Solaris. 2001-10-09 Charles Kerr <charles@rebelbase.com> * gmime-filter.c (g_mime_filter_construct): make sure outptr is zeroed out before we read it in g_mime_filter_set_size(). 2001-10-06 Jeffrey Stedfast <fejj@ximian.com> * gmime-filter-basic.c (filter_filter): Implemented uuencoding. (filter_complete): Implemented uuencoding. * gmime-utils.c (g_mime_utils_uuencode_close): New function to flush the uuencoder. (g_mime_utils_uuencode_step): New function to uuencode a block of data. 2001-10-05 Jeffrey Stedfast <fejj@ximian.com> Fixes for c++ compilation * gmime-stream*.c: s/template/stream_template * gmime-filter*.c: s/template/filter_template 2001-10-04 Jeffrey Stedfast <fejj@ximian.com> * gmime-data-wrapper.c (g_mime_data_wrapper_set_stream): If we just change the order of operations, we can get away without a second stream pointer. * gmime-stream.c (g_mime_stream_substream): Revert. * gmime-stream-buffer.c (stream_substream): Instead of calling g_mime_stream_substream(), call the source stream's substream method directly. I think this is the better fix for the bug Charles just fixed. 2001-10-04 Charles Kerr <charles@rebelbase.com> * gmime-stream.c (g_mime_stream_substream): fix refcount stealth bug. Calling this on a buffered stream wound up reffing two streams instead of one because of a nested call to g_mime_stream_substream(). This took a lot of scaffolding to find. :) * gmime-data-wrapper.c (g_mime_data_wrapper_set_stream): fix refcount paranoia bug. ref the new *before* unreffing the old just in case new==old. * gmime-filter-basic.[ch]: fix some compiler warnings that I introduced yesterday. (Strange how the same version of gcc finds different warnings on different platforms.) 2001-10-03 Charles Kerr <charles@rebelbase.com> * gmime-part.c (g_mime_part_get_content): bugfix for when getting the content from a stream-mem. We were just returning the stream-mem's gbytearray buffer, but we need to check against the stream's bounds. * gmime-filter-basic.[ch]: added support for decoding a uuencoded stream; added a placeholder for uuencoding a stream. * md5-utils.c: commented out d(x) macro. 2001-10-02 Jeffrey Stedfast <fejj@ximian.com> * gmime-stream-buffer.h: buflen should be an ssize_t not a size_t. Thanks to Charles for catching this. 2001-10-01 Charles Kerr <charles@rebelbase.com> * gmime-filter.c: include <string.h> to pick up memcpy prototype. * gmime-stream-mem.c: same. * gmime-stream-buffer.c: same. * gmime-stream-filter.c: same. * gmime-stream-mem.c (stream_flush): added a retval of 0. * gmime-filter-crlf.h (g_mime_filter_crlf_new_type): renamed prototype as g_mime_filter_crlf_new to sync with .c * gmime-part.h: added g_mime_part_set_content_object() prototype. * gmime-content-type.h: Replaced <> with "" in #include <gmime-param.h> * pan-mime-parser.c: added #include gmime-stream-buffer.h to pick up prototype for g_mime_stream_buffer_gets. (g_strstrbound): removed unused func. * gmime-utils.c: on calls to ctype functions, explicitly upcast the char arguments as ints to shut up gcc warnings on Solaris. * gmime-param.c: same. 2001-09-29 Jeffrey Stedfast <fejj@ximian.com> * pan-mime-parser.c: New parser (with exactly the same API as gmime-parser.c) that is meant to parse MIME objects without needing them to be memory mapped. Quite a bit slower on average, but is vastly sped up by using a GMimeStreamBuffer in BLOCK_READ mode. * gmime-stream-buffer.c (stream_write): Incremement the stream position by the number of bytes we wrote. (stream_tell): Return stream->position. (stream_substream): Just return a substream of our source stream. (g_mime_stream_buffer_gets): Increment the stream position by the number of bytes read if and only if we are operating on a buffered stream. 2001-09-27 Jeffrey Stedfast <fejj@ximian.com> * gmime-stream-file.c (stream_tell): Return stream->position here too. * gmime-part.c (g_mime_part_set_pre_encoded_content): Don't decode into a stream and then set the data wrapper encoding to the incoming encoding type, instead use filters to decode into the stream and set the data wrapper encoding to the default. * gmime-stream.c (g_mime_stream_set_bounds): Don't set the position equal to end if end == -1. * gmime-parser.c (g_mime_parser_construct_message): Use the stream functions to find the beginning and end of the stream rather than breaking abstractions. Also reset the mem stream after writing to it. (g_mime_parser_construct_part): Reset the mem stream here too. (g_mime_parser_construct_part_internal): Use the stream interfaces to get the position instead of breaking abstractions. * gmime-stream-fs.c (stream_tell): Return stream->position. * gmime-stream-mem.c (stream_seek): Return the new syteam position. (stream_tell): Return stream->position. 2001-09-23 Jeffrey Stedfast <fejj@ximian.com> * doc/gmime-docs.sgml: Documented streams. * gmime-stream-fs.c (stream_write): Seek to the position we think we're at before attempting to write, and increment the stream position after the write. * gmime-stream-file.c (stream_write): Seek to the position we think we're at... this is just in case we are or have substreams that might have read or written in the meantime. Also remember to increment the stream position after the write. (stream_eos): Only return feof() if our end boundary is unlimited. * gmime-stream-mem.c (stream_write): Start writing data at stream->position rather than always appending it to the end of the mem stream. Also don't go writing past the end boundary if it's set. (stream_length): Use a relative bound_end. (stream_seek): Same. (stream_eos): Here too. (stream_write): And here. (stream_read): And here. (stream_substream): Correctly set the bounds. (g_mime_stream_mem_new): Here too. (g_mime_stream_mem_new_with_byte_array): And here. (g_mime_stream_mem_new_with_buffer): Same. (g_mime_stream_mem_set_byte_array): And finally here. 2001-09-22 Jeffrey Stedfast <fejj@ximian.com> * test-streams.c: New test suite for streams. * gmime-stream-buffer.c (stream_read): Fixed some logic bugs (including forgetting a break statement at the end of a case). (g_mime_stream_buffer_gets): Fixed some logic bugs. * gmime-stream-mem.c (stream_read): Fixed logic error. 2001-09-21 Jeffrey Stedfast <fejj@ximian.com> * gmime-stream-buffer.c (g_mime_stream_buffer_gets): Implemented. (stream_reset): Implemented. (stream_eos): Implemented. (stream_write): Reimplemented. (stream_read): Reimplemented. 2001-09-21 Jeffrey Stedfast <fejj@ximian.com> * gmime-stream-buffer.[c,h]: New stream that buffers reads or writes to/from another stream. Will also implement a gets() method for Charles. 2001-09-20 Jeffrey Stedfast <fejj@ximian.com> * gmime-stream-mem.c (stream_eos): Check for position >= instead of == bound_end * gmime-stream.c (g_mime_stream_eos): Do some simple bounds checking. * doc/*: Updated. * gmime-part.c (g_mime_part_get_content_object): Added. 2001-09-19 Jeffrey Stedfast <fejj@ximian.com> * gmime-stream-fs.c (stream_seek): Improve. * gmime-stream-file.c (stream_reset): Oops, reset the position pointer on a successful reset. (stream_seek): Fixed. 2001-09-19 Jeffrey Stedfast <fejj@ximian.com> * gmime-stream-fs.c (stream_reset): Reset the position offset. Doh! * gmime-stream.c (g_mime_stream_write_to_stream): Don't increment total if no bytes were read/written. * gmime-stream-filter.c (stream_substream): Copy over the filters. * gmime-part.c (g_mime_part_verify_content_md5): Updated. (g_mime_part_set_content_md5): Updated. (g_mime_part_get_content): Updated. (write_content): Updated. * gmime-data-wrapper.c (g_mime_data_wrapper_write_to_stream): Implemented. * gmime-filter-basic.[c,h]: A basic filter that does Base64 and QP encoding/decoding. * gmime-filter-crlf.[c,h]: A simple filter that does crlf(/dot) encoding/decoding. 2001-09-19 Jeffrey Stedfast <fejj@ximian.com> * gmime-data-wrapper.c (g_mime_data_wrapper_new_with_stream): Ref the stream. (g_mime_data_wrapper_set_stream): Same. (g_mime_data_wrapper_get_stream): Return the internal stream. (g_mime_data_wrapper_get_encoding): Return the internal stream's encoding. (g_mime_data_wrapper_write_to_stream): Not-yet-implemented. * gmime-filter.[c,h]: Abstract class for filters. * gmime-stream-filter.[c,h]: Abstract stream for filtering. * gmime-part.c (g_mime_part_set_content): Updated for data-wrapper changes. (g_mime_part_set_content_byte_array): Same. (g_mime_part_set_pre_encoded_content): And here. (g_mime_part_get_content): And here too. * gmime-parser.c (g_mime_parser_construct_part_internal): Fix offset calculations. (g_mime_parser_construct_part_internal): Updated for data-wrapper changes. 2001-09-18 Jeffrey Stedfast <fejj@ximian.com> * test-parser.c (test_parser): Updated. * test-mime.c (test_parser): Updated. * gmime-utils.h: Move the GMimePartEncodingType enum here. * gmime-stream-fs.[c,h]: Implemented. * gmime-stream.c (g_mime_stream_construct): New function to initialize the stream data members. (g_mime_stream_substream): New function to get a substream of another stream. (g_mime_stream_unref): If the stream is actually a substream, unref it's "super" stream if we are destroying the substream. * gmime-stream-mem.c (stream_substream): Implemented. (g_mime_stream_mem_new): Updated to use g_mime_stream_construct(). (g_mime_stream_mem_new_with_byte_array): Same. (g_mime_stream_mem_new_with_buffer): And here too. * gmime-stream-file.c (stream_substream): Implemented. (g_mime_stream_file_new): Updated to use g_mime_stream_construct(). (g_mime_stream_file_new_with_bounds): Same. * gmime-part.c (g_mime_part_set_content_md5): Updated to use streams. (g_mime_part_verify_content_md5): Same. (g_mime_part_set_content): Updated to use streams and data wrappers. (g_mime_part_set_content_byte_array): Same. (g_mime_part_set_pre_encoded_content): And here. (g_mime_part_set_content_object): New function that allows one to set the content object of a MIME part. (g_mime_part_get_content): Updated to use streams. (write_content): Same. (g_mime_part_write_to_stream): Replacement for g_mime_part_write_to_string(). (g_mime_part_to_string): Updated to use g_mime_part_write_to_stream(). (g_mime_part_destroy): Updated to destroy the content object rather than destroying a GByteArray (since we longer use a GByteArray for the content data). * gmime-parser.c (g_mime_parser_construct_message): Now takes a stream argument instead of a string. (g_mime_parser_construct_message_from_file): Deprecated. (g_mime_parser_construct_part): Also takes a stream now. * gmime-message.c (g_mime_message_write_to_stream): Replacement for g_mime_message_write_to_string(). (g_mime_message_to_string): Updated. * gmime-header.c (g_mime_header_write_to_stream): Replacement for g_mime_header_write_to_string(). (g_mime_header_to_string): Updated. 2001-09-17 Jeffrey Stedfast <fejj@ximian.com> * gmime-stream.[c,h]: Abstract stream class. * gmime-stream-mem.[c,h]: Memory stream. * gmime-stream-file.[c,h]: File stream. * gmime-data-wrapper.[c,h]: Data wrapper class. Will be used as the content object in MIME parts. 2001-08-23 Jeffrey Stedfast <fejj@ximian.com> * gmime-utils.c (encode_8bit_word): Oops. Add the closing ? char. (g_mime_utils_8bit_header_encode): Oops. Make sure we encode *all* lwsp chars. (g_mime_utils_8bit_header_decode): Slightly better fix for the other day. 2001-08-19 Jeffrey Stedfast <fejj@ximian.com> * doc/*: Updated. 2001-08-18 Jeffrey Stedfast <fejj@ximian.com> * Makefile.am: Added gmime-charset.[c,h] to the build. * gmime-charset.[c,h]: New source files for managing charset related issues. (g_mime_charset_init): New function to retrieve the user's locale information for later use with gmime_charset_locale_name. (g_mime_charset_locale_name): New function to return user's locale. * gmime-utils.c (g_mime_utils_8bit_header_decode): linear whitespace isn't the only thing that can delimit atoms. (get_codeset): Removed in favor of the new gmime-charset functions. (g_mime_utils_8bit_header_encode): Use g_mime_charset_locale_name. (encode_8bit_word): And here too. 2001-08-15 Jeffrey Stedfast <fejj@ximian.com> * internet-address.c (decode_mailbox): When returning due to a missing local part, make sure to set *in to inptr. 2001-08-13 Charles Kerr <charles@rebelbase.com> * gmime-utils.c (encode_8bit_word): query nl_langinfo for the codeset instead of just assuming iso-8859-1. Thanks to Volodymyr M . Lisivka <lvm@mystery.lviv.net> for suggesting this patch. * gmime-utils.c (g_mime_utils_8bit_header_encode): same. * gmime-parser.c (find_header_part_end): new utility function to find the dividing line between body & header. (g_mime_parser_construct_part): sync. (g_mime_parser_construct_message): sync. * gmime-parser.c (get_header_block): remove unused func. (rfc822_headers): remove unused static array. 2001-07-02 Jeffrey Stedfast <fejj@ximian.com> * zentimer.h: Added. Provides some timing macros for performace testing. * zenprofiler.h: Added. Extends zentimer.h as a simple profiler that gives nice printouts. * test-parser.c: Use zentimer.h 2001-06-23 Jeffrey Stedfast <fejj@ximian.com> * gmime-header.c (g_mime_header_remove): New function. (g_mime_header_set): Setting header to NULL no longer removes the header. Use g_mime_header_remove instead. * gmime-message.c (g_mime_message_write_to_string): No longer have to sync the headers. (g_mime_message_get_headers): Same. (g_mime_message_set_sender): sync the From header. (g_mime_message_set_reply_to): Sync the Reply-To header. (g_mime_message_add_recipient): Sync the recipient header. (g_mime_message_add_recipients_from_string): Same. (g_mime_message_set_subject): Sync the Subject header. (g_mime_message_set_date): Sync the date header. (g_mime_message_set_message_id): Sync the Message-Id header. 2001-06-03 Jeffrey Stedfast <fejj@ximian.com> * gmime-utils.c (quoted_encode): Minor cleanup. 2001-06-02 Jeffrey Stedfast <fejj@ximian.com> * gmime-message.c (sync_headers): Oops. Don't place "Cc:" in the header value string :-) 2001-03-31 Charles Kerr <charles@rebelbase.com> * gmime-utils.c (g_mime_utils_8bit_header_decode): big speedups. * gmime-utils.c (g_mime_utils_8bit_header_encode): small speedups. 2001-05-29 Jeffrey Stedfast <fejj@ximian.com> * internet-address.c (decode_mailbox): Oops, test to make sure we won't be running past the end of the buffer when considering a retry. Thanks to Charles Kerr for this fix. 2001-03-29 Charles Kerr <charles@rebelbase.com> * gmime-part.c (g_mime_part_append_pre_encoded_content): fix small bug that crept into the last commit. 2001-05-29 Jeffrey Stedfast <fejj@ximian.com> Fixes on behalf of Charles Kerr of Pan fame: * gmime-parser.c (g_mime_parser_construct_part_from_file): Use g_mime_part_append_pre_encoded_content(). * gmime-part.c (g_mime_part_append_pre_encoded_content): New function so that the FILE parser doesn't need to manage it's own content array. * gmime-header.[c,h]: const'ify. (g_mime_header_foreach): New function to call a chosen function for each header in the header object. 2001-05-26 Jeffrey Stedfast <fejj@ximian.com> * configure.in: Updated version to 0.6.0. * README: Updated version to 0.6.0. * doc/*: Updated again. * gmime-header.c (g_mime_header_to_string): New function - mostly for the sake of keeping with the API of the rest of GMime. (g_mime_header_set): Make sure to always encode the header value before we set it. * gmime-part.c (g_mime_part_write_to_string): New function to write the mime part to a GString. (g_mime_part_to_string): Use g_mime_part_write_to_string. * gmime-message.c (g_mime_message_get_headers): Use the new g_mime_header_to_string function. (g_mime_message_write_to_string): New function to write the message to a GString. (g_mime_message_to_string): Use write_to_string. 2001-05-25 Jeffrey Stedfast <fejj@ximian.com> * doc/*: Updated. * Makefile.am: Add gmime-header.[c,h] to the build. * gmime-parser.c: Numerous changes to use gmime-header. * gmime-message.c: Numerous changes to use gmime-header. (g_mime_message_add_arbitrary_header): Removed. (g_mime_message_set_header): The replacement for add_arbitrary_header. (g_mime_message_get_header): New function to get a header. * gmime-header.[c,h]: New source fies to handle the complicated nature of setting/getting header pairs. 2001-05-24 Jeffrey Stedfast <fejj@ximian.com> * doc/*: Updated. * doc/Makefile.am: Use $(INSTALL) and $(INSTALL_DATA) rather than `install -m 644` * alloca.c: New file for systems that do not have alloca(). * Makefile.am: build alloca.c * gmime-utils.c: Don't #include <alloca.h> - this is now handled by config.h. * config.h.in: Added alloca define checks. * acconfig.h: Remove some extra defines that we don't care about. 2001-05-20 Jeffrey Stedfast <fejj@ximian.com> * gmime-parser.c (parse_content_headers): Simplified and also unfolded content-headers. * gmime-part.c (g_mime_part_get_filename): If there isn't a disposition, make sure that we don't ignore the possibility of a "name" param in the Content-Type header. 2001-05-12 Jeffrey Stedfast <fejj@ximian.com> * gmime-utils.c (need_quotes): Include '.' as a char to quote. * gen-table.c (main): Fixed a type-o. * internet-address.c (decode_mailbox): Be a little more forgiving about unexpected chars while parsing the name part of the email address. Skip the bad char and then retry. If we fail again, *then* we abort. * gmime-utils.c: #include <alloca.h> * gmime-parser.c (g_mime_parser_construct_part): Oops, inend points to the end of the string, not the last char of the string (ie, '\0' not the char before it). 2001-05-08 Jeffrey Stedfast <fejj@ximian.com> * gmime-table-private.h: Oops, take out the check for isblank(). * internet-address.c (decode_quoted_string): Get rid of unused variable. (decode_address): Same. 2001-04-03 Jeffrey Stedfast <fejj@ximian.com> * internet-address.c (decode_domain): Try to only get "fully-qualified" domain names, or ones that "look" like they are at least ;-) (decode_mailbox): If decode_domain() returns NULL, don't append the '@' char. Also make sure that the name is non-empty. 2001-04-01 Jeffrey Stedfast <fejj@ximian.com> * gmime-utils.c (g_mime_utils_quote_string): Made smarter. 2001-03-31 Jeffrey Stedfast <fejj@ximian.com> * Makefile.am: Added rules to build gen-table.c and added gmime-table-private.h to the build. * gen-table.c: New file to generate gmime-table-private.h if need be. * gmime-table-private.h: New file that contains gmime_special_table. * gmime-utils.c: Remove the gmime_special_table from here and instead #include gmime-table-private.h. * internet-address.c: #include gmime-table-private.h 2001-03-30 Jeffrey Stedfast <fejj@ximian.com> * gmime-message.c (create_header): Simplified a tad. (g_mime_message_add_recipient): Updated for the new InternetAddress API. (g_mime_message_add_recipients_from_string): Simplified greatly using the new InternetAddress API. * internet-address.[c,h]: Completely rewritten to be a lot more rfc0822 compliant. 2001-03-28 Jeffrey Stedfast <fejj@ximian.com> * README, configure.in: Updated version to 0.5.0 2001-03-29 Charles Kerr <charles@rebelbase.com> * gmime-parser.c (g_mime_parser_construct_message_from_file): new function to read a message from a FILE* instead of a character array. This can be used to reduce the memory requirements of very large messages. * gmime-parser.c (get_next_line): new internal function. * gmime-parser.c (g_mime_parser_construct_part_from_file): same. * gmime-parser.c (parse_content_headers): same. * gmime-parser.c (find_header_end): same. * gmime-parser.c (get_header_block): same. * gmime-parser.c (get_header_block_from_file): same. 2001-03-28 Jeffrey Stedfast <fejj@ximian.com> * gmime-utils.c (get_time): Fix a compile warning. 2001-03-20 Charles Kerr <charles@rebelbase.com> * gmime-utils.c (get_year): constify the argument list. * gmime-utils.c (get_time): same. * gmime-utils.c (get_days_in_month): if #0'ed out unused code. * gmime-utils.c (parse_broken_date): same. 2001-03-15 Jeffrey Stedfast <fejj@ximian.com> * internet-address.c (internet_address_new_from_string): Try to be a little better about extracting the name, not 100% accurate but better I guess. 2001-03-14 Jeffrey Stedfast <fejj@ximian.com> * gmime-part.c (g_mime_part_get_content_disposition_parameter): It's okay to have a NULL disposition or a NULL param hash. (g_mime_part_get_filename): Same. (g_mime_part_get_content): It's okay not to have content. 2001-03-13 Jeffrey Stedfast <fejj@ximian.com> * gmime-utils.c (quoted_decode): Fix a possible buffer overrun. 2001-02-27 Jeffrey Stedfast <fejj@ximian.com> * gmime-utils.c (parse_rfc822_date): Allow for time token to not have a seconds field. 2001-02-11 Jeffrey Stedfast <fejj@ximian.com> * gmime-part.c (g_mime_part_to_string): Oops. Don't init content_md5 with the content location string ;-) * gmime-parser.c (g_mime_parser_construct_part): Init content to NULL to get rid of a warning (this doesn't really matter as 'len' was init'd to 0) * gmime-part.c: #include unistd.h 2001-01-27 Jeffrey Stedfast <fejj@helixcode.com> * gmime-part.c (g_mime_part_set_content_byte_array): So set_content_array() was no good. After inspecting glib it was discovered that there are hidden data members of a GByteArray that hold info like if the data is NUL terminated, how much data is allocated, etc. 2001-01-26 Charles Kerr <charles@superpimp.org> * gmime-part.c (g_mime_part_set_content_array): new function. 2001-01-25 Charles Kerr <charles@superpimp.org> * gmime-part.c (g_mime_part_destroy): fix memory leak - the disposition wasn't being g_free()d. 2001-01-24 Charles Kerr <charles@superpimp.org> * gmime-part.c (g_mime_part_get_filename): Now takes a const GMimePart. 2001-01-17 Jeffrey Stedfast <fejj@ximian.com> * internet-address.c (encoded_name): Updated. * gmime-part.c (g_mime_part_set_pre_encoded_content): Updated to reflect changes to gmime-utils. * gmime-utils.c (g_mime_utils_text_is_8bit): Take a len argument. (g_mime_utils_best_encoding): Same. (encode_8bit_word): Updated. 2001-01-14 Jeffrey Stedfast <fejj@ximian.com> * gmime-parser.c (g_mime_parser_construct_part): Check for NULL returns from g_strstrbound. 2001-01-11 Charles Kerr <charles@superpimp.org> * gmime-utils.c (get_year): small patch to handle 2-digit year representation a little better -- "71" now translates to 1971, but "01" now translates to 2001. Thanks to Ihar Viarheichyk for suggesting this change. 2001-01-07 Jeffrey Stedfast <fejj@helixcode.com> * gmime-part.c (g_mime_part_set_content_md5): Don't allow the setting of Content-MD5 headers for multipart/* and message/rfc822 types. * rfc/rfc1864.txt: Added (Content-MD5 RFC). 2001-01-05 Jeffrey Stedfast <fejj@helixcode.com> * gmime-part.c (g_mime_part_set_content_md5): Oops, didn't quite do this right. It should be correct now. (g_mime_part_verify_content_md5): New function to verify the Content-MD5. 2001-01-04 Jeffrey Stedfast <fejj@helixcode.com> * gmime-parser.c (g_mime_parser_construct_part): Added support for parsing Content-Location and Content-Md5 headers. Trim excess trailing \n's. Also fix a bug where the end boundary would get included as part of the last MIME Part's contents. (g_strstrbound): Bounded strstr. * configure.in: * README: Updated version to 0.4.0 * Makefile.am: Added md5-utils to the build. * md5-utils.[c,h]: Added. * gmime-part.c (g_mime_part_to_string): Slightly new implementation. Also added in support for Content-Location and Content-Md5 headers. (g_mime_part_destroy): Return if the mime part is NULL. Also free the new content_location and content_md5 headers. (g_mime_part_set_content_md5): Implemented. (g_mime_part_get_content_md5): Implemented. (g_mime_part_set_content_location): Implemented. (g_mime_part_get_content_location): Implemented. (get_content_type): Append a '\n'. 2001-01-01 Jeffrey Stedfast <fejj@helixcode.com> * doc/gmime-sections.txt: Updated. * doc/sgml/*: Updated. * doc/html/*: Updated. 2000-12-24 Jeffrey Stedfast <fejj@helixcode.com> * gmime-parser.c (g_mime_parser_construct_part): Don't set the boundary if we are able to get the boundary from the content-type because we'll just set the same data over again which is a waste. Also tack a \n onto the ends of the boundary markers so that "blah_" and "blah_D" don't trick the parser. Fix it so that an empty part won't set any contents (since setting a 0-length content stream causes a segfault). (construct_headers): Take an inlen argument so that we can parse headers without needing to strdup before passing into this function. (g_mime_parser_construct_message): Don't strdup the headers since we can just pass in the length to the construct_headers() function now. 2000-12-18 Jeffrey Stedfast <fejj@helixcode.com> * gmime-parser.c (g_mime_parser_construct_part): Moved from being an internal-only function. 2000-12-28 Charles Kerr <charles@superpimp.org> * gmime-utils.c (g_mime_utils_text_is_8bit): gracefully handle a NULL pointer being passed in. Thanks to Christophe Lambin for reporting this problem. 2000-12-14 Charles Kerr <charles@superpimp.org> * gmime-messge.c (g_mime_message_get_message_id): change g_return_if_fail() to g_return_val_if_fail() to ensure that a value is always returned. * gmime-part.h (g_mime_part_get_content_description): make the GMimePart argument const. * gmime-part.h (g_mime_part_get_content): same. * test-mime.c (test_addresses): fix bad printf statement. * test-parser.c (test_parser): fixed the printf type of a time_t from an int to unsigned long to avoid compiler warnings. 2000-12-13 Jeffrey Stedfast <fejj@helixcode.com> * doc/sgml/*: * doc/html/*: * doc/gmime-sections.txt: Updated. * README: Updated version line to 0.3.0 2000-12-12 Jeffrey Stedfast <fejj@helixcode.com> * gmime-part.c (g_mime_part_to_string): Wrap some content-* headers that might sometimes be long. * gmime-message.c (create_header): Updated to reflect function name changes/moves. * gmime-utils.c (g_mime_utils_header_printf): Moved here from gmime-message.c and slightly renamed ;-) (g_mime_utils_header_fold): Moved from being private to being public. 2000-12-12 Jeffrey Stedfast <fejj@helixcode.com> * gmime-part.c: Hmmm, why weren't multiparts using the internal get_content_type function rather than ...content_type_to_string? Possible FIXME: Should content_type_to_string do what get_content_type does? or should it remain untouched and just return "type/subtype"? * gmime-part.h: No more boundary data member. * gmime-part.c (g_mime_part_get_boundary): Updated, as we no longer store the boundary on the MIME Part and instead only on the content-type (where it belongs). (g_mime_part_set_boundary): And here too. (g_mime_part_destroy): No longer need to destroy the boundary. 2000-12-11 Jeffrey Stedfast <fejj@helixcode.com> * gmime-part.c (g_mime_part_get_subpart_from_content_id): Erm, smack me. This needs to be recursive (this is what happens when I code really late at night). 2000-12-11 Jeffrey Stedfast <fejj@helixcode.com> * configure.in (GMIME_MINOR_VERSION): Updated to 0.3.0 * gmime-parser.c (get_mime_part): Updated to reflect the add_subpart API change. * test-mime.c (test_multipart): And here too. * gmime-part.h (g_mime_part_add_child): Macro added for backward source compatability. * gmime-part.c (g_mime_part_get_subpart_from_content_id): Renamed from g_mime_part_get_child_from_content_id as I think I'm gonna start calling them subparts in the API as it's a bit clearer than calling them children. Also fixed up some of the logic (what if the parent mime part had a content-id? The way the code was before it'd never search the subparts). Oh, it also returns const now. (g_mime_part_add_subpart): Renamed from g_mime_part_add_child and also now does some error checking to make sure the parent part is a multipart. 2000-12-10 Charles Kerr <charles@superpimp.org> * gmime-part.c (g_mime_part_get_child_by_content_id): new utility function. 2000-12-09 Jeffrey Stedfast <fejj@helixcode.com> * gmime-part.c (g_mime_part_set_boundary): Generate a random boundary if passed boundary is NULL. 2000-12-07 Jeffrey Stedfast <fejj@helixcode.com> * gmime-message.c (multipart_get_body): Traverses a MIME Part and 'always' extracts the body assuming it exists. Extracts the preffered text type if it exists, otherwise returns the type less preferred. (g_mime_message_get_body): Use multipart_get_body if the toplevel part is a multipart. 2000-12-05 Jeffrey Stedfast <fejj@helixcode.com> * README: Updated with more RFCs, etc. * rfc/* Added a bunch more rfcs of interest. 2000-12-04 Jeffrey Stedfast <fejj@helixcode.com> * test-mime.c: Added test code for the address parser. * gmime-utils.c (g_mime_utils_quoted_encode_step): Updated. No longer need to special-case whitespace chars as they have been put into the gmime_special_table (a while ago). 2000-12-02 Jeffrey Stedfast <fejj@helixcode.com> * Makefile.am: Install gmime.m4 * gmime.m4: Added. 2000-12-02 Jeffrey Stedfast <fejj@helixcode.com> * gmime-part.c (g_mime_part_foreach): New convenience function for manipulating each subpart of a mime part. * gmime-message.c (g_mime_message_foreach_part): New convenience function for manipulating all mime parts of a message. 2000-12-02 Jeffrey Stedfast <fejj@helixcode.com> * doc/sgml/*: * doc/html/*: Updated. * doc/gmime-sections.txt: Add g_mime_message_[g,s]et_message_id. * gmime-parser.c (construct_headers): Parse out Message-Id headers. * gmime-message.c (g_mime_message_destroy): Free the message id. (g_mime_message_set_message_id): New function to set the message id on a message. (g_mime_message_set_message_id): New accessor function for message-ids. (create_header): Write out the Message-Id if and only if it exists. 2000-11-29 Jeffrey Stedfast <fejj@helixcode.com> * README: Updated. * doc/gmime-sections.txt: Added new functions. * doc/html/*: Updated. 2000-11-29 Jeffrey Stedfast <fejj@helixcode.com> * configure.in: Bumped the version to 0.2.0 because the API has changed a bit. * test-parser.c: * test-mime.c: Updated. * gmime-utils.c (BASE64_ENCODE_LEN): (QP_ENCODE_LEN): Macros for determining how much space we need to encode a chunk of data to that encoding (estimate is liberal). (encode_8bit_word): Use the macros to determine the length we need. * gmime-message.c (g_mime_message_get_body): Updated to reflect changes to gmime-part. * gmime-parser.c (get_mime_part): Updated. * gmime-part.c (g_mime_part_set_content): Now takes a len argument and has been updated to reflect the move to GByteArray. (g_mime_part_destroy): Updated. (g_mime_part_set_pre_encoded_content): New convenience function to decode pre-encoded content and set it on the mime part. (g_mime_part_get_content): Renamed from g_mime_part_decode_contents. * gmime-part.h: GMimePart->content is now a GByteArray that will hold the raw content (in it's unencoded form). 2000-11-28 Jeffrey Stedfast <fejj@helixcode.com> * gmime-content-type.c (g_mime_content_type_new_from_string): Ignore extranious semicolons between parameters. Handle the event where the content-type doesn't specify a subtype (this is broken but some mailers will send "Content-Type: text" for example). (g_mime_content_type_new): If there isn't a type or subtype, print a warning and try to do some smart defaulting action. * gmime-message.c (handle_multipart_alternative): Only remember the last subpart if it was a text part. 2000-11-19 Jeffrey Stedfast <fejj@helixcode.com> * doc/html/*: * doc/sgml/*: Updated. * test-mime.c: Updated. * gmime-utils.c (g_mime_utils_quote_string): Do the detection on whether or not to wrap the string in quotes here rather than requiring a boolean argument specifying whether the string should be quoted. RFC2045 provides us with a list of characters that are not safe. * gmime-param.c (g_mime_param_to_string): Updated to reflect changes to g_mime_utils_quote_string. This function is the main reason for the change - parameter values should really only be quoted if they have to be else they should remain unquoted. * internet-address.c (encoded_name): Updated to reflect changes to g_mime_utils_quote_string. 2000-11-19 Jeffrey Stedfast <fejj@helixcode.com> * TODO: Updated. * gmime-utils.c: Updated gmime_special_table. (g_mime_utils_8bit_header_encode): Since rfc2047 states that all whitespace between encoded atoms must be ignored, the encoder should therefor make an effort to encode whitespace when it falls between two atoms that will be encoded. Use the IS_ESAFE mask. (quoted_encode): Now takes a safemask argument to specify which chars are safe to leave unencoded and also a arg to save whether or not the word was encoded. (g_mime_utils_8bit_header_encode_phrase): Updated to use the IS_PSAFE mask. 2000-11-19 Jeffrey Stedfast <fejj@helixcode.com> * gmime-parser.c (header_unfold): New function to unfold a header (to be used internally). (construct_headers): Unfold headers as we parse them. * configure.in: Changed version to 0.1.1. * gmime-part.c (get_content_disposition): Append a ";" before appending any parameters even when there is no disposition text. Also only enter into the param loop if there exist params. 2000-11-16 Jeffrey Stedfast <fejj@helixcode.com> * doc/sgml/*: Added. * doc/gmime-sections.txt: Added g_mime_part_decode_contents and g_mime_header_printf. * gmime-message.c (header_fold): New function to fold headers. (g_mime_header_printf): New convenience function to print a formatted header (which will get correctly folded). (create_header): Correctly fold each header. 2000-11-16 Charles Kerr <charles@superpimp.org> * gmime-utils.c (datetok): don't crash if the date string passed in is NULL. 2000-11-15 Jeffrey Stedfast <fejj@helixcode.com> * gmime-part.c (g_mime_part_decode_contents): New convenience function to decode the contents of a mime part (based on code by Wayne Schuller). 2000-11-14 Jeffrey Stedfast <fejj@helixcode.com> * doc/html/index.sgml: Added - apparently we need this :-) * doc/Makefile.am: Updated to pass distcheck 2000-11-10 Jeffrey Stedfast <fejj@helixcode.com> * doc/gmime-docs.sgml: Added a new paragraph explaining the difference between functions that return const and the ones that don't. * doc/html/*.html: Updated. * gmime-message.c: * gmime-part.c: * gmime-parser.c: * internet-address.c: * gmime-param.c: Updated Gtk-Doc comments. * gmime-content-type.c: Wrote Gtk-Doc comments. 2000-11-10 Jeffrey Stedfast <fejj@helixcode.com> * Makefile.am (SUBDIRS): Added doc * configure.in: Generate doc/Makefile * doc/Makefile.am: Ignore more headers when performaing gtkdoc-scan. * doc/gmime-docs.sgml: * doc/gmime-sections.txt: Added. * doc/html/*.html: Generated library reference. 2000-11-09 Jeffrey Stedfast <fejj@helixcode.com> * TODO: Updated. * test-mime.c: Added test of the new quote/unquote functions. * gmime-message.c (g_mime_message_add_recipients_from_string): Check for escaped quotes. * gmime-part.c (get_content_type): Correctly quote params. (get_content_disposition): Same. * gmime-param.c (g_mime_param_new_from_string): Check for escaped quotes. Also use unquote_string() to unquote the value. (g_mime_param_to_string): Correctly quote the value. * gmime-parser.c (get_mime_part): Check for escaped quotes and correctly unquote strings where appropriate. * gmime-utils.c (g_mime_utils_quote_string): New convenience function to escape and quote a string. (g_mime_utils_unquote_string): New convenience function to un-escape and un-quote a string. * internet-address.c (encoded_name): Use quote_string(). (internet_address_new): Use unquote_string() to unquote and unescape the name component (it will be re-escaped and re-quoted when it's written to a string later). 2000-11-09 Jeffrey Stedfast <fejj@helixcode.com> * TODO: Updated. 2000-11-08 Jeffrey Stedfast <fejj@helixcode.com> * gmime-parser.c (construct_headers): Oops. Set the subject with the decoded string rather than the encoded one. (get_mime_part): On the chance that we come accross a broken multipart, default the mime type to text/plain and continue on. 2000-11-08 Jeffrey Stedfast <fejj@helixcode.com> * internet-address.c (internet_address_to_string): Moved code around to avoid unecessary warnings. * gmime-utils.c: Added Gtk-Doc style comments to all the functions. (g_mime_utils_best_encoding): Return a GMimePartEncodingType instead of gint. 2000-11-01 Jeffrey Stedfast <fejj@helixcode.com> * Makefile.am (INCLUDES): Add -DG_LOG_DOMAIN=\"gmime\" 2000-10-31 Jeffrey Stedfast <fejj@helixcode.com> * test-parser.c (test_parser): Test g_mime_message_get_body() here as well. * test-mime.c: Updated to reflect changes to get_body. * gmime-message.c (g_mime_message_get_body): Return an allocated buffer because we want to return the decoded message body rather than the (possibly) encoded form. (create_header): Write out the arbitrary headers first as they may contain headers like "Received:" which really ought to be at the top. * gmime-part.c: Removed some old cruft. 2000-10-29 Jeffrey Stedfast <fejj@helixcode.com> * internet-address.c (encoded_name): Use g_mime_utils_8bit_header_encode_phrase() to encode the addrspec. * gmime-utils.c (g_mime_utils_8bit_header_decode): Fix to make the decoder more rfc compliant. As stated by rfc2047, all white space between encoded words MUST be ignored. (g_mime_utils_8bit_header_encode_phrase): New rfc2047 encoding function for phrases (see rfc2047 section 5 part 3). 2000-10-28 Jeffrey Stedfast <fejj@helixcode.com> * gmime-utils.c (parse_rfc822_date): Fixed the off-by-one-hour bug. * test-mime.c: Updated to reflect changes to g_mime_message_get_body(). * gmime-message.c (g_mime_message_get_headers): Added Gtk-Doc comment. (g_mime_message_get_body): Modified to return a const pointer to the message body rather than allocating it. 2000-10-28 Charles Kerr <charles@superpimp.org> * gmime-message.c (g_mime_message_get_headers): New function similar to g_mime_message_get_body. Useful if you want a raw display of headers separate from the body. * gmime-message.[c,h] (g_mime_message_get_body): made const. 2000-10-28 Jeffrey Stedfast <fejj@helixcode.com> * tests/Makefile.am: New automake file (when we make a release, this directory should really be a part of the tarball as it contains data for the test programs). * tests/.cvsignore: Added. * Makefile.am (SUBDIRS): Add the 'tests' directory * configure.in: Generate tests/Makefile 2000-10-27 Jeffrey Stedfast <fejj@helixcode.com> * test-mime.c: Added code to test g_mime_message_get_body() * gmime-message.c (g_mime_message_get_body): New convenience function that attempts to get the message body in the requested text format (plain vs html). * gmime-parser.c (construct_headers): If the end of a header field is the end of the header, break out of the loop. * gmime-content-type.[c,h]: Added const to arguments where appropriate. * gmime-utils.h: Fixed a spelling mistake in a comment ;-) 2000-10-26 Charles Kerr <charles@superpimp.org> * gmime-utils.h: made const the input ptrs for encode/decode funcs. * gmime-utils.c: Updated to reflect const changes. 2000-10-26 Jeffrey Stedfast <fejj@helixcode.com> * test-mime.c: Also updated. * gmime-parser.c (construct_headers): Updated to reflect name changes. * gmime-message.c: Updated to reflect name changes. * gmime-message.h: Changed the name of the recipient type #defines. 2000-10-24 Jeffrey Stedfast <fejj@helixcode.com> * Makefile.am (SUBDIRS): Added "." * configure.in: Create libgmime.spec 2000-10-24 Charles Kerr <charles@superpimp.org> * gmime-utils.c: added #include <stdlib.h> to pick up atoi. * internet-address.c (internet_address_new): removed unused variable `decoded' 2000-10-24 Jeffrey Stedfast <fejj@helixcode.com> Thanks to Charles Kerr of Pan fame for the following fixes. * gmime-utils.c (encode_8bit_word): Oops, encode 'word' and not 'ptr'. * gmime-part.c (g_mime_part_destroy): Free the content-id. 2000-10-21 Jeffrey Stedfast <fejj@helixcode.com> * gmime.h.in: Wrap definitions in #ifndef __GMIME_H__ 2000-10-18 Jeffrey Stedfast <fejj@helixcode.com> * TODO: Updated. * test-*.c: Updated to reflect GMime API changes. * gmime-part.c: #include "gmime-utils.h" * gmime-parser.c (g_mime_parser_construct_message): Now takes a boolean argument 'save_extra_headers' which tells the parser whether it should add unknown headers to the arbitrary header array or ignore them. (construct_headers): Save the extra headers if desired. * gmime-message.c (g_mime_message_add_arbitrary_header): Use the new GMimeHeader structure. (g_mime_message_new): Always initialize the arbitrary header array. (g_mime_message_destroy): The arbitrary header array will never be NULL (as it is now pre-initialized) so don't bother checking. (create_header): rfc2047 encode the arbitrary header values. 2000-10-17 Jeffrey Stedfast <fejj@helixcode.com> * rfc/rfc*.txt: MIME specification RFCs * README: Updated. * TODO: Added a list of tasks that need to be done eventually. * gmime-parser.c (get_mime_part): rfc2047 decode the content-description before we set the value. * gmime-part.c (g_mime_part_to_string): rfc2047 encode the content-description before we write it to the string. 2000-10-06 Jeffrey Stedfast <fejj@helixcode.com> * gmime-parser.c (construct_headers): rfc2047 decode some headers. * internet-address.c (internet_address_to_string): Now takes an argument to rfc2047 encode or not, when not rfc2047 encoding. (internet_address_new_from_string): Rewrote * gmime-message.c (create_header): rfc2047 encode addresses and subject headers. 2000-10-05 Jeffrey Stedfast <fejj@helixcode.com> * gmime-utils.c (g_mime_utils_quoted_encode_step): Fixed some non-compliance issues like encoding all spaces as =20 even when they shouldn't have been. 2000-10-04 Jeffrey Stedfast <fejj@helixcode.com> * acconfig.h: * config.h.in: #undef HAVE_ISBLANK * configure.in: Check for the isblank() GNU extension function. * gmime-parser.c (get_mime_part): Parse for the Content-Id. Use isblank() instead of isspace() when looking to see if the content header was wrapped. We want it to match only if the next char is either a tab or a space. (isblank): Define an isblank() macro if HAVE_ISBLANK isn't defined. * gmime-part.c (g_mime_part_set_content_id): New function to set the Content-ID. (g_mime_part_get_content_id): New function to get the Content-Id. (g_mime_part_to_string): Print content id's if available. (get_content_type): Eek! If there aren't any params, don't assign 'string' an empty string! It's already been initialized with a type! 2000-10-04 Jeffrey Stedfast <fejj@helixcode.com> * gmime-utils.c (quoted_decode): New function to decode rfc2047's version of the quoted-printable encoding. (decode_8bit_word): Use quoted_decode() (quoted_encode): New function to encode to rfc2047's version of quoted-printable (removed from the internals of encode_8bit_word) (encode_8bit_word): Use quoted_encode() 2000-10-01 Jeffrey Stedfast <fejj@helixcode.com> * internet-address.c (internet_address_new_from_string): Fixed a logic error that cut off the last char of the name (or address). * gmime-parser.c (construct_headers): Optimized. * gmime-part.c (get_content_type): If there are no params, don't try to get any. Fixes a segfault. * gmime-utils.[c,h]: New utilities functions for use with libgmime (time and encoding/decoding routines) * test-mime.c: test some of the routines in gmime-utils.c * gmime.h.in: #include "gmime-utils.h" * configure.in: Added checks for time zone stuff * acconfig.h: * config.h.in: Added some #undef's for timezone stuff * Makefile.am: Added gmime-utils.[c,h] 2000-09-24 Jeffrey Stedfast <fejj@helixcode.com> * HACKING: Updated * gmime-param.c: Wrote Gtk-docs comments * gmime-parser.c: Wrote Gtk-docs comments * AUTHORS: Updated * autogen.sh: Updated autogen.sh to look for gmime.h.in instead of gmime.h 2000-09-24 Jeffrey Stedfast <fejj@helixcode.com> * gmime.h: Removed * gmime.h.in: Replacement for gmime.h - modified to be dynamically created at build-time. * configure.in: Updated to generate gmime.h and also to ignore doc/ until docs are written. * Makefile.am: Modified to ignore doc/ * tests/*: MIME messages that break are likely to break MIME parsers. 2000-09-24 Jeffrey Stedfast <fejj@helixcode.com> * gmime-part.c (get_content_disposition): Put a space between disposition parameters. (get_content_type): New convenience function to dump the content type and it's params to a string (for use internally). (g_mime_part_to_string): Use get_content_type and add print for content-description's. * gmime-parser.c (get_mime_part): strip leading/trailing whitespace from the disposition and convert param names to lowercase. Also fixed Content-Transfer-Encoding. 2000-09-23 Jeffrey Stedfast <fejj@helixcode.com> * gmime-part.c (g_mime_part_destroy): Erm, make sure to increment to the next item in the list. * gmime-message.c (recipients_destroy): Optimized a bit * gmime-content-type.c (g_mime_content_type_new_from_string): Change all parameter names to lowercase, this way we can look them up without having to know which case the original name used (eg boundary). * test-mime.c: renamed from mime-test.c * test-parser.c: a new test program that allows us to specify a file to get our test email from. 2000-09-22 Jeffrey Stedfast <fejj@helixcode.com> * configure.in: remember glib_cflags and glib_libs so we can dump them into gmime-config later. * gmime-config.in: use glib_cflags and glib_libs. * gmime.h: add variables for major/minor/micro release * Makefile.am: switch to GMIME_ instead of LIBGMIME_ stuff