Some hints to get the bttv driver up and running
================================================

general hints
-------------

(1) Make sure if your board is recognized correctly. The bttv driver
    should print a line like this one (Use the 'dmesg' command to see
    the kernel messages):

	bttv0: model: BT848(Hauppauge old)

    If your card isn't autodetected correctly, you have to specify the
    board type as insmod argument (card=n).  You might also have to
    specify tuner=x and pll=x.
    Check the driver documentation for details and a list of supported
    cards.  The standard kernel has the bttv documentation in the
    Documentation/video4linux/bttv directory.

(2) If you are using a vanilla 2.2.x kernel kernel, it is worth trying
    to upgrade as the very first step.  Either download and build bttv
    0.7.x for your 2.2.x kernel, or upgrade to 2.4.x which includes
    the 0.7.x driver already.
    bttv 0.7.x knows a lot more cards than the 2.2.x kernel driver, the
    autodetect is much improved and a number of known problems is
    fixed.

(3) If you have problems with xawtv, you should open a xterm (or
    whatever your favorite terminal app is) and start xawtv from
    there. This way you'll see any error messages xawtv might print on
    stderr which should help to find the source of the problems.

(4) If something broke after an update, have a look at the changelog.
    It might be mentioned there.


common problems
---------------

?: I have a black screen in overlay mode
!: The driver was not initialized correctly, v4l-conf (or the
   X-Server) has to configure the bttv driver with the current video
   mode and framebuffer address first.  Check if v4l-conf is installed
   suid root, it needs root priviliges to do this.  You can also start
   v4l-conf from a terminal and check the messages it prints.

?: I have a blue screen.
!: Good, the overlay is working.  A blue screen is what you get if the
   grabber chip has no input signal.  You are probably using the wrong
   video source, pick another.  Also happens sometimes if the tuner
   type is wrong, check the driver configuration.

?: I have a noisy screen and/or can't tune (some) stations.
!: Most likely the tuner types is wrong, check the driver configuration.
   It's no problem to do trial-and-error here.

?: The video is outside the window and spread in thin lines over the
   screen.
!: xawtv / v4l-conf didn't autodetect the color depth for your screen
   correctly.  You can fix that with xawtv's -bpp switch.

?: Only the left part of the window is updated, the right one is updated
   never / sometimes / only if the window is small.
!: Your graphics card and/or motherboard can't deal with the data rate
   going over the PCI bus, leading to canceled PCI transfers.  Reduce
   the color depth, with 16 bpp instead of 32 bpp should work much
   better.

?: I get no sound.
!: (a) If your TV-Card is connected to the sound card's line in with a
       short cable: Make sure the sound driver is loaded, sound cards
       are usually quiet until initialized by the driver.  Also check
       the mixer settings.
   (b) Double-check the card type is correct (see above).
   (c) If there is still no go, have a look at the Sound-FAQ in the
       bttv documentation.


hardware specific problems
--------------------------

 * bttv + DRI seem not to play nicely together with some cards (ATI
   Rage128).  The linux box just freezes.  Don't know why.  Suspect
   it's either a hardware problem or a bug somewhere in DRI (either
   kernel or xfree86).  The only workaround I know of is to turn off
   DRI.

 * Some motherboard chipsets have PCI bugs, especially with PCI-PCI
   transfers which are used for video overlay.  The bt848/878 chips
   have some bug compatibility options, which can be enabled to
   workaround these problems.  Have a look at the triton1 and vsfx
   insmod options.  For some known-buggy chipsets these are enabled
   automagically.

 * Sometimes IRQ sharing causes trouble.  It works most of the time,
   but in combination with some hardware and/or drivers it doesn't work.
   Especially graphic cards are known to cause trouble due to the lack
   of a IRQ handler.  Try disabling the VGA IRQ in the BIOS.  Try moving
   cards to another PCI slot.  Your motherboard manual should tell you
   which PCI slots share IRQ's.